Cfs Bemeler nakup rabljenega (251)

Stanje: novo, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.641 mm, prostornina tovornega prostora: 906 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor (walking floor) * King pin load (National, t): 12 * Axle load (National, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via button in truck (installation of button not included) and by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS control on driver's side, behind axles * Standard smartboard * Air and electrical console centrally mounted with gantry * Landing legs: Weweler * As steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages * Position of landing leg crank handle: outside * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse Fgedpfxey Dmu Ne Aplob * Rims: Steel * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on the lamp holder * Work lights (operated via switch): 2 LED reversing lights at front left and right, mounted near landing legs * Protection of lighting unit: One-piece mudguard * LEDs in door end cross member: 2 x 3-function LED * Operating underrun protection: Fixed underrun bar * Mud flaps underrun protection: Black with STAS logo * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: Swivel coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling - position: Connection possible at front wall (additional connection possible at landing legs) * Hydraulic positioning: Pressure return, pressure left, return right (CON) * Number of mud flaps on fenders: 2 pieces * Toolbox * Air connection mounted laterally on control panel * Aluminium access ladder 3.80 m - right side * Broom and shovel holder * Two plastic wheel chocks * Profile front wall: 3 mm - 2 mm * Profile side wall: 3 mm - 2 mm * Moving floor system: Cargo Floor brand * Floor system operation: Radio remote control * Cargo Floor Control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Front wall inclination (°): 90 * Rear wall inclination (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Residue emptying wall: Aluminium * Storage for residue emptying wall: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: Swing door, 1/2 to 1/2 division, with door end cross member

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, HORIZONTAL MACHINING CENTRE MODEL AVEREX HS 450 K Fodpfx Aeyz Du Uspljgb 1. Controller: AVEREX-FANUC Mpro I Plus (FANUC Oi-MF PLUS) 2. APC: 2 pallets 3. Maximum spindle speed: 15,000 rpm 4. Spindle taper: BBT 40 BIG-PLUS 5. Maximum spindle motor power: 37kW, 249Nm 6. 100% hand-scraped contact surfaces 7. One-piece stepped casting with heavily ribbed base 8. Maximum travel X/Y/Z: 640mm/610mm/680mm 9. Maximum work area: 785mm x 1000mm 10. Pressurised oil-air lubrication for spindle, ball screws, and guides 11. Thermal stability: spindle cooling 12. BIG-PLUS® spindle design 13. THK® (IKO®) roller guides 14. TSUBAKI® ball screws 15. Rapid traverse X/Y/Z: 60 m/min, acceleration 1G 16. APC unit with 2 pallets, 400mm x 400mm 17. High-speed ATC: 1 second tool-to-tool 18. Hydraulic pallet clamping system with air leakage detection 19. Air blast through spindle 20. Air blow through spindle during ATC 21. High-quality telescopic covers for 3 axes 22. Automatic pallet washing system 23. Automatic machine on/off and warm-up scheduling within 7 days 24. Low lubrication alarm system 25. 3-colour machine status indicator 26. Coolant tank level detection with float-ball sensor 27. Oil skimmer 28. 50 kVA transformer 29. CE EN ISO 13849-1 certification Standard controller functions: 1. 15" colour LCD with intelligent human-machine interface (iHMI) 2. Part program memory: 5120 metres (2MB) 3. HRV-III+ servo drives 4. JERK control 5. Nano AICC II control with 200 block look-ahead 6. Ethernet 7. CF/USB device 8. Manual Guide i 9. Multilingual display 10. High-speed skip 11. Rigid tapping 12. Predefined drilling cycle 13. Helical interpolation 14. Circular interpolation 15. Custom macros 16. Custom macros - common variables #600-#999 17. Tool life management 18. Storable programs: 1000 19. Workpiece coordinate offsets: 48 pairs 20. Tool offsets G45 to G48 21. Tool offsets: 400 pairs 22. Tool offset memory C 23. G10 programmable data input 24. Coordinate system rotation 25. Polar coordinate command Additional functions: 1. Scaling 2. Program restart 3. Manual pulse handle interrupt 4. Programmable mirror image 5. Programmable spindle tool load monitoring 6. Programmable ATC speed 7. Programmable tool magazine speed 8. Large tool function Included accessories: 1. ATC60 60-tool magazine 2. PARKSON WU® 4th axis full rotary table (indexing 33.3rpm 0.001°) 3. Scraper-type chip conveyor (750L coolant tank included) 4. MARPOSS® T-18 tool measurement (retractable) 5. 40 bar through-spindle coolant FIFTH AXIS PREWIRING AND EQUIPMENT ON BOTH PALLETS WITH DRIVE – CABLES AND PIPES

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 203129, vpenjalna sila: 400 kN, premer vijaka: 18 mm, delovna prostornina: 23 cm³, Here we offer, as a specialist trader for injection moulding machines, the following well-maintained, used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been wholesalers for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and cylinder replaced) Machine number: 203129 Features: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter chute The machine is retrofitted with interfaces for: - Tool temperature control - Heating channel - Colour dosing / colouring with Siemens Logo PLC control German language - From first ownership - Origin Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 tons Tie bar distance: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Maximum distance between platen: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50 A Weight: 2,150 kg Warranty: Warranty until initial commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery against freight reimbursement Fsdpfxsx Rvcie Aplsgb Available from our warehouse in Hannover, Germany For your information regarding the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our Hannover warehouse - All offered machines are checked and tested before dismantling - We DO NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All offered machines come from successful companies where regular maintenance and care is a given - All offered machines are available for inspection at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 40.226 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 221240, premer vijaka: 40 mm, injekcijska masa: 172 g, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 370S 700-290 with equipment for vertical injection Serial Number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition: very well maintained Fjdpowg Tt Rjfx Aplsgb Extras: - Device for vertical injection - 1 core pull circuit - Additional heating band connection - 5 separate manually regulated cooling circuits - Air valve connection controllable via Selogica - Equipment packages: quality assurance, documentation, advanced monitoring, production control, etc. - Flexible part chute - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - German language - Single ownership – origin Germany - Regular maintenance by manufacturer and previous owner Injection unit: Screw diameter: 40 mm Shot weight: 172 g/PS Injection pressure: 1,530 bar Shot volume: 188 ccm Clamping unit: Clamping force: 70 t / 700 kN Tie bar distance: 370 x 370 mm Platen size: 510 x 510 mm Mould height: 200 mm Max. platen gap: 600 mm Ejector stroke/force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 15 kW Heating capacity: 7.7 kW (5 zones) Total connected load: 23 kW Warranty: Warranty up to first commissioning Loading/Shipping: Loaded free onto buyer's truck, or free delivery against freight cost reimbursement Available ex stock Hannover, Germany More pictures to follow. For information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our stock in Hannover - All machines offered are inspected and tested before dismantling - WE DO NOT sell insolvency assets • WE ARE NOT a broker dealing with third-party property - All machines offered come from successful businesses where maintenance and care are a matter of course - All machines offered can be inspected at our warehouse

Stanje: rabljeno, prevoženi kilometri: 290.000 km, moč: 228 kW (309,99 KM), prva registracija: 03/2011, vrsta goriva: dizel, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2011, Oprema: ABS, klimatska naprava, žerjav, DAF CF 75.310 Fsdpfx Aotr Agxopljgb Wywrotka 4,30 m + żuraw Importowana / Bezwypadkowa W BARDZO DOBRYM STANIE! ROK PRODUKCJI: 2011 PRZEBIEG: 290 000 km WYPOSAŻENIE: ✔ ABS ✔ Elektryczne szyby ✔ Elektryczne lusterka ✔ Wspomaganie kierownicy ✔ Tachograf Wywrotka: 430 x 230 x 60 cm (dł. x szer. x wys.) ŁADOWNOŚĆ: 8 000 kg DMC: 19 000 kg Rozstaw osi: 400 cm Rozmiar opon: 13R22,5 Zawieszenie: Resorowe Żuraw: PALFINGER 11001 - KA TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂNĂ (Romana - załatwiamy wszystkie formalności eksportowe, w tym tablice tymczasowe) RADEK - ?????

Stanje: rabljeno, prevoženi kilometri: 290.000 km, moč: 228 kW (309,99 KM), prva registracija: 03/2011, vrsta goriva: dizel, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2011, Oprema: ABS, klimatska naprava, žerjav, DAF CF 75.310 Wywrotka 4,30 m + żuraw Importowana / Bezwypadkowa Fsdpfx Apjrliunslsgb W BARDZO DOBRYM STANIE! ROK PRODUKCJI: 2011 PRZEBIEG: 290 000 km WYPOSAŻENIE: ✔ ABS ✔ Elektryczne szyby ✔ Elektryczne lusterka ✔ Wspomaganie kierownicy ✔ Tachograf Wywrotka: 430 x 230 x 60 cm (dł. x szer. x wys.) ŁADOWNOŚĆ: 8 000 kg DMC: 19 000 kg Rozstaw osi: 400 cm Rozmiar opon: 13R22,5 Zawieszenie: Resorowe Żuraw: PALFINGER 11001 - KA TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂNĂ (Romana - załatwiamy wszystkie formalności eksportowe, w tym tablice tymczasowe) RADEK - ?????

Stanje: dober (rabljeno), Koda: 0329 Znamka: PAOLONI Model: T 140 CF - CE standard Vretenska rezkalnica z drsnim vozičkom za izdelavo spojev v lesu, plastiki, kompozitnih materialih in drugih – CE standard Tehnični podatki Dimenzije mize: 1300 x 652 mm Voziček: 1300 x 240 mm – hod vozička 1180 mm Maksimalna odprtina mize: 340 mm Višina mize: 890 mm Hod vretena: 200 mm Fgsdpoyviqqefx Aplob Premer izmenljivega vretena: 40 mm Hitrosti vretena: 3000/4500/6000/8000/10000 vrt./min Moč motorja: 7,5 KM Premer sesalnega priključka: 120 mm Skupne mere: 1300 x 900 x 1150 mm (višina) Teža: 630 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Technical Details Turning Diameter: 660/275 mm Turning Length: 1498 mm Control: Fanuc/Mori Seiki MSX 701 Total Power Requirement: 90 kVA Machine Weight approx.: 26.6 t Space Requirement approx.: 5301 x 2997 x 2788 mm Additional Information 9-Axis CNC Turning and Milling Center * CNC Control Fanuc MSX-701 * Upper milling spindle (B-axis) as a fully functioning 4th axis, positioning 0.0001° * 40-position tool magazine * 10-position lower turret, all stations driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, adjustable pressure 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Blow-off system for main spindle chuck (controlled via M function) * Blow-off system for cutting tool (controlled via M function) * Coolant pistol incl. accessories * Oil mist extractor * Direct measuring system for X1, X2, Y axes * Bar feeder interface * Dual foot switch for both spindles * Island and pocket programming for MAPPS * High speed fixed cycle for MAPPS * Program memory expansion to 8 MB * Program restart * 3-level signal lamp * Memory card 512MB (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Traverses: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B axis indexed at 1° and braked at 0.0001° X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub spindle): 1610 mm Rapid traverse: (X1, Z1) 50 m/min. / (Y, X2, Z2, SZ) 30 m/min. Main and Sub Spindle: Stepless spindle speeds (spindle 1 + 2): 30–3000 rpm C-axis (spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub spindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Turret: Number of tool stations: 10 Rotational speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling Spindle Head: Tool holder: HSK A63 Max. speed: 12000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool Changer: 40-position Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total Power Requirement: 90 kVA Main Dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine Weight: 26.6 t Accessories: Measuring arm (as pictured) Tool measurement in machine Tool holder + box, reducer sleeves, driven tools Fgodpfeyzzcpjx Aplsb Clamping jaw set Collet set

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2020.12.171, skupna širina: 3.590 mm, skupna višina: 2.910 mm, skupna dolžina: 2.210 mm, širina brušenja: 2.600 mm, hitrost brusilnega traku: 2.400 mm/s, dolžina brusnega traku: 3.250 mm, višina obdelovanca (maks.): 80 mm, širina brusilnega traku: 2.650 mm, potreba po zraku: 192 m³/h, Heesemann KSA 8 Belt Sanding Machine, 2,600 mm Working Width — Wide Belt Sander The sanding line consists of: 1. Machine Frame Designed to accommodate the conveyor bed, with options to attach 1 sanding unit and 1 brushing unit. 2. Conveyor Bed Individual conveyor belts, feed speed adjustable from 5 to 25 m/min (frequency controlled). Constant working height of 920 mm. Thickness adjustment (3–80 mm) via height adjustment of the entire upper machine segment. Includes monitoring of the timing belts for lift gearbox at adjustment speed of 3 mm/sec. Integrated control cabinets included. Fgsdpfx Ajywuqreplob 3. Industrial PC 21.5" Capacitive multi-touch color display (1920 x 1020 pixel), CF card, Windows Embedded Standard OS, with production data acquisition (display of production and downtime). Ethernet connectivity available. Memory for 1,000 programs with storage and automatic selection of motor speeds per program. 4. Profinet interface for master control integration. 5. Longitudinal Sanding Unit with Contact Roller for Calibration (Steel) Balancing quality Q 1 (fine balanced) as per VDI 2060, driven by Poly-V belt, maintenance-free bearings. Roller diameter: 350 mm. Abrasive belt size: 3,250 x 2,650 mm. Belt speeds: 1–24 m/s. Drive power: 37 kW with frequency inverter. Infinitely variable sanding belt speed, wear-free braking system, intermittent belt cleaning device, automatic infrared belt tracking, reverse sanding direction, manual grit compensation. Infeed: segmented, pneumatically controlled pressure lip. Outfeed: continuous, pneumatically controlled pressure lip. 6. Brush Roller Unit Central height adjustment, complete with extraction hood and pressure roller. Brush material: horsehair. Diameter: 250 mm. Drive power: 5.5 kW. 7. Workpiece Vacuum Clamping System For secure feeding of workpieces shorter than 750 mm, including integrated fan. Operating voltage: 400V, 50Hz. Machine Paint Specification: - Interior: Light grey, RAL 7035 - Exterior: Light grey, RAL 7035 - Doors: Anthracite, RAL 7016 - Brush loading side: left - Terminal: front left 8. Ionization Bar (Top-Mounted) For discharge of static electricity, including high-voltage transformer. 9. Workpiece Blowing Device With rotating compressed-air nozzles at machine outfeed, including extraction hood. General Specifications: Sanding width: 2,600 mm Working height: 920 mm Max. workpiece thickness: 3–80 mm Dust Extraction: Required air velocity: min. 20 m/s. Significantly higher air velocities may cause functional issues. Machine vacuum approx. 1,000 Pa Air Consumption: - Longitudinal sanding unit, roller Ø 350 mm (port 1 x Ø 330 mm): 103.0 m³/min - Brush unit Ø 250 mm (port 1 x Ø 206 mm): 38.0 m³/min - Workpiece cleaning (ports 2 x Ø 120 mm): 28.0 m³/min - Belt cleaning (port 1 x Ø 160 mm): 24.5 m³/min - Vacuum clamping system fan (port 1 x Ø 180 mm): 30.5 m³/min Total air requirement: 224.0 m³/min

Stanje: rabljeno, Leto izdelave: 2014, OKUMA - LB3000 EXII - 2014 - krmilni sistem OSP-P300L CNC s 15" barvnim zaslonom na dotik - čas vklopa: 65.458 h - na dan 18.03.2026 NC čas v delovanju: 36.054 h - čas vrtenja vretena: 19.533 h - čas rezanja: 16.582 h - poraba energije: 33,1 kVA Tehnični podatki - maks. premer vrtenja: 480 mm - maks. obdelovalni premer: 340 mm - maks. dolžina struženja: 785 mm - vpenjalna glava + 10'' hidravlični vpenjalni tulec B210-A06-01, 3x mehke čeljusti (Schunk KM-WBL 103) Fgodpfoyzkn Ujx Apleb - 1x trde čeljusti (Schunk SHB-J 100) - hidravlični prehodni tulec SS 1770, vpenjalna cev Glavno vreteno - vreteno z JIS A2-6 koncem, izvrtina 80 mm, integrirani motor - območje hitrosti: 45 - 5.000 min⁻¹ - 22 kW/15 kW - kontinuirano krmiljena C-os, 360° z inkrementi 0,001° Protipretensko vreteno - območje hitrosti: 50 - 6.000 min⁻¹ - 11 kW/7,5 kW - vreteno z končnim premerom 140 mm, izvrtina 62 mm, integrirani motor - kontinuirano krmiljena C-os, 360° z inkrementi 0,001° - vpenjalni tulec + 6'' hidravlični vpenjalni tulec B206-01, 3x mehke čeljusti (Schunk KM-WBL 62) - hidravlični prehodni tulec SS1243, vpenjalna cev - pomik drugega vretena - NC os W, hod W450: 595 mm - vzmetni izmetalec kosa iz proti vretena - nadzor preobremenjenosti osi W (navor pogona) Centrično vpenjanje (konjiček) na drugem vretenu Revolver glav - število orodnih pozicij: 12, fiksnih in gnanih BMT60 (ne VDI) - notranje vpenjanje orodja: 25 x 25 mm - zunanje vpenjanje orodja: 40 mm Gnjena orodja - moč pogona: 7,1/4,1 kW - območje hitrosti: 45 – 6.000 min⁻¹ Hitrosti pomika - hitro premikanje v oseh X in Z: 25/30 m/min - hitro premikanje v osi C: 200 min⁻¹ Pomiki - os X: 260 mm - os Z: 510 mm - os Y: 115 mm (+70 mm / -45 mm) Podatki o stroju - širina: 3330 mm – brez podajalnika in transporterja - globina: 1800 mm - višina: 2250 mm - masa stroja: 5.250 kg Dodatna oprema: Komplet OSP-P300L Advanced One Touch CF-M-E, vsebuje: - funkcija koordinatne transformacije - funkcija generiranja profilov - napredni One Touch IGF - simulacija 3D obdelovalnega procesa - nadzor prekoračitve obdelovalnega časa - nadzor obremenitve (vreteno, podajalne osi) - nadzor delovanja NC (vključno s štetjem kosov) - funkcija skrajšanja cikel časa - Hi-Cut Pro funkcija - funkcija nadzora hitrosti vretena - visoko-tlačno hlajenje, maks. 20 bar, maks. 50 l/min - podajalnik materiala ILS tip MUK 7012 s paletnim magazinom 6-70 mm/1250 mm, letnik 05/2014, proizvajalec Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - izsesavanje FILTERMIST FX4002 Oprema stroja: - držalo za vpenjalni tulec: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (trenutno na glavnem vretenu) - tuleci premer (mm): 6-33, 34-36, 38-42, 44-46, 48, 50-51, 53, 55, 57, 60, 64-65 - vpenjalni tulec z utorom premer (mm) 55-60-65 - držalo za vpenjalni tulec: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (trenutno na drugem vretenu) - tuleci premer (mm): 6-28, 30-32, 34-36, 39-41 Držala: - aksialno držalo - 5x - nožno držalo - 5x - držalo na rezilu - 2x - prednji dvostranski narezovalec - 3x - prečni narezovalec - 3x - redukcijska vstavljiva cev (serijska proizvodnja) - reducirke – silon premer (mm): 12-14-15,5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52

Stanje: novo, Leto izdelave: 2026, TEHNIČNE SPECIFIKACIJE ZOPO V10-B Pomik po X-osi: 1.000 mm Pomik po Y-osi: 620 mm Pomik po Z-osi: 630 mm Razdalja med konico vretena in mizo: 120 ~ 750 mm T-utorji: 5 x 18 mm Razdalja med T-utorji: 100 mm Dimenzije delovne površine mize: 1.200 x 600 mm Največja nosilnost mize: 800 kg Fgedpfxoiyyyps Apleb Stožec vretena: BT 40 Moč glavnega motorja vretena (30 min./kontinuirano): 15/11 kW Navor glavnega vretena S1 - 52,5 Nm / S2 - 95,5 Nm / S3 - 118 Nm Prenos moči vretena: Direktni pogon Največja hitrost vretena: 12.000 min⁻¹ (vrt./min) SPECIFIKACIJE OSI X, Y, Z Hitri pomik po X/Y osi: 36 m/min Hitri pomik po Z-osi: 32 m/min Največji posamični pomik osi X/Y/Z: 10.000 mm/min Moč motorja osi X/Y (Navor): 3 kW (20 Nm) Moč motorja osi Z (Navor): 3 kW (36 Nm) MENJALNIK ORODIJ (ATC – avtomatska menjava orodij) Tip zalogovnika orodij: Z roko Kapaciteta zalogovnika orodij: 24 Tip vpenjala orodja: BT 40 Čas menjave orodja: 2,5 sek. NATANČNOST Natančnost pozicioniranja X/Y/Z: ± 0,008 mm Ponavljivost X/Y/Z: ± 0,005 mm DIMENZIJE STROJA Dolžina x širina: 2.850 x 2.450 mm Višina: 2.850 mm Teža: 6.800 kg DODATNA OPREMA VKLJUČENA V CENO Krmilnik Fanuc 0i-MF z 10,4˝ barvnim LCD zaslonom Vreteno z direktnim pogonom (Direct Drive), motor 11/7,5 kW in največja hitrost 12.000 vrt./min Sočasno krmiljenje 3 osi Linearne vodila z valji na oseh X, Y, Z (45 mm) Zalogovnik orodij z roko, 24 mest Hladilna enota s posodo Sistem za hlajenje vretena z oljem Sistem izpihovanja vretena Zračna pištola Sistem za ločevanje olja od hladilne tekočine (Oil Skimmer) Transporter za ostružke s členkasto verigo Zaprt elektro omarica s klimatsko napravo Vmesniki za komunikacijo programov in podatkov: RS 232 vmesnik, CF kartica in USB Avtomatski izklop M30 Transformator Centralizirano avtomatsko mazanje Togo rezkanje navojev (Rigid tapping) Vgrajena LED delovna svetilka x2 LED opozorilna svetilka v 3 barvah MPG (ročni inkrementalni oddaljeni upravljalec) z žico Vijaki in podstavki za nivelacijo stroja Škatla z orodji + orodja Navodila za uporabo in seznam rezervnih delov Teleskopske zaščite za vse 3 osi Popolnoma zaprto delovno območje s samozapiralnimi vrati CE certifikat 2 leti garancije na krmilnik 1 leto na stroj Cena je EXW (Evropska zaloga), vključno z nakladanjem na tovornjak. Prevoz, montaža, zagon, usposabljanje in letne servisne pogodbe so na voljo na zahtevo za doplačilo. Montažo in usposabljanje vedno izvaja naša visoko usposobljena servisna ekipa na 3 lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Uradni zastopnik: CNC Top Ten bv Coevorden, Nizozemska

Stanje: rabljeno, največja dovoljena obremenitev: 28.070 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, naslednji pregled (TÜV): 01/2027, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor NEW TÜV General Manufacturer: Knapen Trailers * Model / Type: K100 A5060 * Year of Manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of Registration: Germany * Unladen Weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Permissible Gross Weight: 36,000 kg 202003-0071956-r_order-configur? * Maximum Axle Load: 24,000 kg * Maximum Fifth-Wheel Load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle Configuration: rigid?rigid?rigid ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height at front: 2,690 mm * Internal height at rear: 2,785 mm * Saddle height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel left in front of axles * Lift axle, fully automatic via EBS * Including traction assist (3x brakes) * Remote control for lift axle ----Tyres & Rims * Goodyear KMAX T Fedpfx Apjyrvt Aslegb * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels complete * No spare wheel ----Superstructure * Enclosed side walls left and right * Movable partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * Each door with one locking rod * Top rail made of steel, swing-out on both sides * Platform at front wall * Ladders on front wall left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Roof bow compartment: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 White Aluminium) * Tarpaulin supports 3-position (4 units) * Lashing straps (4 units) ----Floor / Moving Floor * Cargofloor System CF-500 SL-C * Electronic control * Ribbed aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under floor ----Fittings * JOST landing legs with slide compensation * Plastic toolbox left in front of axles (1000 x 500 x 500 mm) * Water tank 30 l with soap dispenser * Closed side underrun protection * Pivoting mud flaps * Antispray mat on 3rd axle * Long access steps with extendable rear steps and platform * 2 x wheel chocks left * Brush and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation * Rear LED work lights (remote-controlled) * LED work lights at landing legs (remote-controlled) * LED LCG-2 switching unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin connector * Knapen Trailers V1 remote control * Hydraulic connections centrally on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections available * Acoustic reversing alarm (manually adjustable) ----Paintwork * Body painted RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.

Stanje: rabljeno, Leto izdelave: 2007, hladilna zmogljivost: 2.200 kW (2.991,16 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 10.420 kg, vhodna napetost: 400 V, skupna širina: 1.900 mm, skupna dolžina: 4.400 mm, skupna višina: 2.800 mm, Vodno hlajen chiller YORK YK CF CG Q7 5CK F 2200 kW Hladilna zmogljivost: 2200 kW / 625,6 ton (12/7 — 35°C) Leto izdelave: 2007 Hladilni krog: 1 kos Fjdpfey Edvyox Aplegb Izmenjevalnik toplote: plašč-cevni Kompresorji: 1 kos York YDHF52DD (centrifugalni, z inverterjem) Vrsta hladilnega sredstva: R134a Dimenzije: 4,4 x 1,9 x 2,8 m Teža: 10.420 kg Delovne ure: 70.488 h Stanje: Dobro

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Ponujamo kompletno napravo za stisnjen zrak z naslednjimi komponentami: 2x vijačni kompresor Kaeser SK 25 (letnik 2022) 2x hladilna sušilnika Kaeser TC 36 (letnik 2022) 1x ločevalnik olja in vode Kaeser Aquamat CF 9 1x tlačna posoda OKS 750 l (letnik 2016) 1x tlačna posoda OKS 2000 l (letnik 2022) Naprava in posamezne komponente so v zelo dobrem stanju. Obratovalne ure Kaeser SK 25_01: 6174 h Obratovalne ure Kaeser SK 25_02: 5674 h Fgsdpfxsy Dt Icj Aplob Za dodatne informacije si oglejte slike.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 1.100.000 km, moč: 340 kW (462,27 KM), prva registracija: 02/2013, vrsta goriva: dizel, velikost pnevmatike: 315/70R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 620 l, barva: oranžna, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 13.000 kg, Leto izdelave: 2013, Oprema: ABS, AdBlue, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, parkirni grelec, spojler, tempomat, zapora diferenciala, = Additional Options and Equipment = - 2 beds - Aluminum fuel tank - AS-TRONIC transmission - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Speed limiter - Main (master) electrical switch - Multifunction steering wheel - MX engine brake - Radio/CD player - Sleeper cab - Sun visor - Parking heater = Comments = NICE CONDITION DAF FTXF105-460 ATE SPACECAB 4x2 TRACTOR UNIT WITH AUTOMATIC GEARBOX, COMPLETE SPOILER SET ON CABIN & AIR CONDITIONING!! 460HP, EURO 5 / EEV!! AS-TRONIC (12 GEARS)!! MX-BRAKE!! ELECTRICAL MAIN SWITCH!! 620 LITER DIESEL TANK!! AIR CONDITIONING!! COMPLETE SPOILER SET ON CABIN!! SUN VISOR!! COMBI-LIGHTS!! ETC!! TRUCK IS IN NICE & CLEAN CONDITION, READY FOR WORK!! MORE DAF CF/XF EURO 2/3/4/5/6 IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: AS-TRONIC (12 gears), 12-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steering axle; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf spring suspension Rear axle: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,798 kg Payload: 11,202 kg Gross vehicle weight: 19,000 kg Functional Cargo space capacity: 620 l Body manufacturer: ZF Loading platform height: 110 cm Condition Technical condition: very good Visual condition: very good Fsdpfx Apeydpq Selsgb Further information Please contact Sales Department or Erik Engel for more information.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 297.725 km, moč: 300 kW (407,89 KM), prva registracija: 09/2020, vrsta goriva: dizel, velikost pnevmatike: 385/55/22.5, konfiguracija osi: 6x2, gorivo: dizel, kapaciteta rezervoarja za gorivo: 750 l, zavore: intarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 7.400 kg, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2020, Oprema: ABS, AdBlue, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, meglenke, navigacijski sistem, tempomat, zapora diferenciala, = Further Options and Accessories = - Aluminum fuel tank - Speed limiter - Air suspension - Particulate filter - Reversing camera - Sleeper cab - Side skirts - Toolbox - PTO (Power Take-Off) - Central lubrication system = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Fsdpewid U Defx Aplsgb Transmission Gearbox: AMT, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf springs Rear axle 1: Tire size: 315/70/22.5; Twin tyres; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 315/70/22.5; Lift axle; Max. axle load: 7,400 kg; Suspension: air suspension Weights Unladen weight: 12,969 kg Payload: 13,031 kg Gross vehicle weight (GVW): 26,000 kg Functional Loading platform height: 130 cm Condition Technical condition: very good Visual condition: very good DAF CF 410 6X2 M4SN3 MACHINE TRANSPORTER WITH SLIDING PLATFORM EURO 6 | PACKAGE | 410 HP DRIVE 6X2 | LAST AXLE IS LIFTABLE AND STEERED WHEELBASE 480 CM STEEL / AIR SUSPENSION DIFFERENTIAL LOCK SLEEPER CAB WITH AIR CONDITIONING RADIO/CD PLAYER WITH NAVIGATION REVERSING CAMERA AUTOMATIC TRANSMISSION WITH ENGINE BRAKE BEACON LIGHT LOADING PLATFORM LENGTH 685 CM HEIGHT OF LOADING PLATFORM ± 130 CM RADIO REMOTE CONTROLLED WINCH TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: dober (rabljeno), prevoženi kilometri: 132.210 km, prva registracija: 07/2003, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, kapaciteta rezervoarja za gorivo: 13.000 l, zavore: intarder, voznikova kabina: dnevna kabina, vzmetenje: jeklo-zrak, prostornina tovornega prostora: 13 m³, Leto izdelave: 2003, Oprema: ABS, električno nastavljivo ogledalo, električno upravljanje oken, = Additional Options and Accessories = - PTO Fodpfx Apjy Ezqbslogb = Further Information = Axle Configuration Brakes: Drum brakes Front axle: Steering; Tyre tread left: 80%; Tyre tread right: 80%; Suspension: Leaf suspension Rear axle 1: Twin tyres; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60%; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: Air suspension Weights Kerb weight: 16,255 kg Payload: 9,741 kg Gross vehicle weight: 25,996 kg Functionality Body manufacturer: La Gram HD-1000 Bar Condition Technical condition: Very good Visual condition: Good Damages: None Financial Information Price: On request Warranty Warranty: DAF CF 85.480 high-pressure vehicle, year of construction 2003. Robust and reliable vehicle for daily professional use. Equipped with a 13,000-litre tank, suitable for extended operations without frequent refilling. Ideal for larger projects and sites with limited water supply. 6x2-4 axle configuration, offering an optimal combination of payload and manoeuvrability, even in confined working areas. Fitted with a KAMAT high-pressure pump type 250, model 32A P32. Renowned for powerful performance and reliability in heavy-duty cleaning tasks. Body by Bekker La Gram, designed for practical and efficient operation. Equipped with 3 hose reels for flexible use. Suitable for • Industrial cleaning • Sewer and pipe cleaning • Heavy-duty flushing and cleaning operations Immediately operational. Contact for further information or viewing. Further Information Please contact Gerrit Haverhoek for more information.

Stanje: rabljeno, prevoženi kilometri: 8.405 km, moč: 243 kW (330,39 KM), prva registracija: 06/1995, vrsta goriva: dizel, velikost pnevmatike: 295/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, gorivo: dizel, barva: rumena, vrsta prenosa: mehanski, število prestav: 16, emisijski razred: euro1, vzmetenje: jeklo, skupna širina: 2.500 mm, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 1995, Oprema: žerjav, Daf CF 85.330 Original niederländisches Fahrzeug aus 1. Hand! Nur 8.400 km Laufleistung! 6x2 / 10 Reifen Volle Blattfederung. 16-Gang Schaltgetriebe. Kran: Ferrari 940. A5 4x hydraulische Abstützungen. 5x hydraulische Ausschübe. Funkfernsteuerung. 2,65 m – 13.700 kg 4,47 m – 8.300 kg 6,37 m – 5.700 kg 8,34 m – 4.100 kg 10,45 m – 3.050 kg 12,65 m – 2.300 kg 14,65 m – 1.800 kg = Weitere Informationen = Technische Daten Zylinderanzahl: 6 Achskonfiguration Bremsen: Trommelbremsen Federung: Blattfederung Vorderachse: Reifendimension: 295/80R22.5; gelenkt; Reifenprofil links: 75%; Reifenprofil rechts: 75% Hinterachse 1: Zwillingsbereifung; Reifenprofil links innen: 50%; links außen: 50%; rechts innen: 50%; rechts außen: 50% Hinterachse 2: Reifendimension: 295/80R22.5; Zwillingsbereifung; Reifenprofil links innen: 40%; links außen: 40%; rechts innen: 40%; rechts außen: 40% Gewichte Leergewicht: 17.460 kg Nutzlast: 8.540 kg zul. Gesamtgewicht: 26.000 kg Ausstattung Kran: Ferrari Identifikation Fedeyrh Tuspfx Apljgb Typennummer: CF 85.330 ATI / 40 t/m Kran / K = Firmeninformation = ALLE PREISE SIND NETTO FÜR DEN EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), wir sprechen Russisch. Wir bemühen uns, korrekte Angaben zu machen, jedoch können aus den bereitgestellten Informationen keine Ansprüche abgeleitet werden.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 904.000 km, moč: 300 kW (407,89 KM), prva registracija: 07/2008, vrsta goriva: dizel, velikost pnevmatike: 315/70R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 620 l, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, število prestav: 16, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 13.000 kg, Leto izdelave: 2008, Oprema: ABS, AdBlue, električno nastavljivo ogledalo, električno upravljanje oken, nadzor oprijema, parkirni grelec, spojler, tempomat, zapora diferenciala, = Additional Options and Equipment = - 600-liter diesel tank - Aluminum fuel tank - Heated mirrors - Driver’s comfort seat - Roof spoiler - Differential lock - Differential lock - Speed limiter - MX engine brake - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - ZF16 manual gearbox = Notes = Fodpfxsy Ey Swj Aplsgb NICE CONDITION DAF FTCF85-410 SPACECAB 4x2 TRACTOR UNIT WITH ZF16 MANUAL GEARBOX, MX ENGINE BRAKE & PARKING AIR CONDITIONING!! 410HP, EURO 5!! ZF16 MANUAL GEARBOX!! MX-BRAKE!! PARKING AIR CONDITIONING!! 620 LITER ALUMINUM TANK!! COMPLETE SPOILER SET ON CABIN!! SUN VISOR!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY-DUTY WORK!! MORE DAF CF/XF EURO 2/3/4/5/6 MODELS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS AVAILABLE)!! SHIPPING, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE-STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Gearbox: ZF16 manual gearbox, 16 speeds, manual transmission Axle Configuration Brakes: disc brakes Front axle: Tire size: 315/70R22.5; Max. axle load: 7,500 kg; Steering; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf spring Rear axle: Tire size: 295/80R22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,700 kg Payload: 11,300 kg Gross vehicle weight: 19,000 kg Functional Cargo area capacity: 620 l Loading platform height: 115 cm Condition Technical condition: very good Visual condition: very good Further Information Contact Sales Department for more information.

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, We offer this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any questions or require further information, please feel free to send us a message or give us a call. Upon request, the order confirmation with all technical details can be provided. 1 Workpiece conveyor system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable between 5 – 25 m/min, frequency controlled, working height constant at 880 mm, including integrated control cabinets; including adjustable stop ruler with digital display and including counter ruler with central width adjustment Fgsdpfx Apoy A D Ecjlsb with centrally height-adjustable and laterally adjustable pressure beam with digital display, which presses plate-shaped workpieces using ball-bearing mounted rubber rollers (axle spacing 38 mm), including support rollers for width extension of the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 lateral guide rollers between the sanding units for secure t ransport of strips 1 Industrial PC 3.0/4" LCD-TFT color display 800 x 600 resolution CF Card 1GB Operating system Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection possible. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, intermittent belt cleaning device, belt break detector, tool holder with quick-change system, base plate for sanding tool, prepared for electronic position control for automatic engagement and disengagement of the sanding tool, able to run in both directions. Belt dimensions: 2,300 x 80 mm Sanding belt speeds: 0/7 – 12 m/s Motor power: 3.0 kW via electronic frequency control for stepless regulation of belt speed. Electronic sanding pressure regulation from terminal. 2 oscillation devices for (Vt4") (positions 1 + 2) For full utilization of the sanding belt 2 belt sanding units "K 4" positions 3 and 4 including stand, for sanding small profile sections, also suitable for edge rounding/can be swivelled 90 degrees upwards and 45 degrees downwards belt break detector, tool holder with quick-change system, base plate for sanding tool, intermittent belt cleaning device, prepared for electronic position control for automatic engagement and disengagement of the pressure tool, including bidirectional operation, set up for manual adjustment and digital displays for adjustment axes. Belt dimensions: 2,000 x 50 mm Sanding belt speeds: 0.5 – 8 m/s Motor power: 1.1 kW via electronic frequency control for stepless regulation of the belt speed. Electronic sanding pressure regulation from terminal. 4 electronic position controls for fully automatic engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and aggregate angle adjustment. 2 steel tools for straight edge, configured for air cushion sanding/ including base plate/for one "M4" aggregate, item no. 9000191310 2 steel profile tools configured for air cushion sanding, including base plate, for one "K4" aggregate, item no. 20000025684

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Schaublin 102N-VM-CF visokoprecizni švicarski tokarilni stroj Letnik: 2005 maks. premer nad posteljo: 200 mm maks. premer nad sani: 120 mm Višina konic: 102 mm Razdalja med konicami: 450 mm Dolžina postelje: 1000 mm Višina postelje: 168 mm Moč: 4,2 kW Hitrost vretena: 100–3000 min⁻¹ (RPM) Vreteno: W25 Prečni hod, os X: 100 mm Ločljivost, os X (radij): 0,01 mm Vzdolžni hod, os Z: 90 mm Ločljivost, os X (radij): 0,01 mm Navojna vretena: - 8 vzdolžnih pomikov - Večji pomiki možni pri uporabi navojske za struženje Maks. presek nožnega držala (sistem Multifix): 10x10 mm Držalo za palice (sistem MULTIFIX) premer: 20 mm Konjiček, po višini in strani nastavljiv: Stožčasta izvrtina puše: Mk2 Zunanji premer vretena: 30 mm Hod vretena: 80 mm Prostornina rezervoarja za hladilno tekočino: 23 L Napetost napajanja: 400 V Skupne mere (D x Š x V): 1500 x 510 x 1550 mm Oprema / dodatne možnosti: - Digitalni merilni sistem ACU-RITE, 3 osi X-Z-Z1 Ločljivost X: 0,001 mm Ločljivost Z: 0,005 mm Ločljivost Z1: 0,005 mm - Sistem za hlajenje orodja - Zadnji pločevinasti varnostni ščit - Dvojno stopalo za zagon/zaustavitev in obratna smer vrtenja vretena - Set kolutnih vložkov Schaublin W25 - Litoželezna glava W25 Ø110 mm s čeljustmi - Revolverska glava za hitro menjavo orodij MULTIFIX-A z držali - Pogon za pomožno opremo z jermenom nastavljivo in vrtljivo napenjalo jermena Fgedew N Rh Ajpfx Apleb pogonska enota z motorjem jermen Ø6x2500 mm - Konjiček - itd. Pod napajanjem v našem skladišču.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 1.130.000 km, moč: 340 kW (462,27 KM), prva registracija: 12/2011, vrsta goriva: dizel, velikost pnevmatike: 385/65R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 870 l, zavore: retarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 13.000 kg, Leto izdelave: 2011, Oprema: ABS, AdBlue, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, nadzor oprijema, parkirni grelec, retarder, tempomat, zapora diferenciala, = More Options and Accessories = - 2 bunk beds - 870-liter fuel tank - ADR/VLG certification - Aluminum fuel tank - AS-TRONIC gearbox Fgjdsy D Aghopfx Apleb - Heated mirrors - Comfort driver's seat - Differential lock - High beam headlights - Speed limiter - Main power switch - Fridge under bed - Alloy wheels - Multifunctional steering wheel - Radio/CD player - Sleeper cab - Sun visor - Auxiliary/parking heater - PTO (power take-off) - ZF Intarder = Remarks = NICE CONDITION DAF FTXF105-460 SPACECAB 4x2 TRACTOR UNIT WITH AUTOMATIC GEARBOX, ZF-INTARDER / ADR-VLG, P.T.O. & AIR CONDITIONING!! 460HP, EURO 5!! AS-TRONIC (12 GEARS)!! ZF-INTARDER!! ADR / VLG (AT-FL / EXII / EXIII / OX) !! ELECTRIC MAIN SWITCH!! P.T.O.!! 870 LITER DIESEL TANK!! AIR CONDITIONING!! SUN VISOR!! ETC!! TRUCK IS IN NICE & CLEAN CONDITION, READY FOR THE JOB!! MORE DAF CF/XF EURO 2/3/4/5/6 IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: AS-TRONIC (12 gears) + ZF Intarder, 12-speed, automatic Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; alloy wheels; max. axle load: 7,500 kg; steerable; left tyre tread: 40%; right tyre tread: 40%; suspension: leaf springs Rear axle: Tyre size: 315/70R22.5; twin tyres; differential lock; alloy wheels; max. axle load: 13,000 kg; inner left tread: 50%; outer left tread: 50%; inner right tread: 50%; outer right tread: 50%; simple reduction; suspension: air suspension Weights Unladen weight: 7,770 kg Payload: 11,230 kg gross vehicle weight: 19,000 kg Functional Cargo volume: 870 l Loading platform height: 120 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Sales Department for more information.

Stanje: rabljeno, prevoženi kilometri: 84.800 km, moč: 271 kW (368,46 KM), prva registracija: 02/2016, vrsta goriva: dizel, lastna masa: 7.090 kg, največja dovoljena obremenitev: 10.910 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 3.700 mm, zavore: zaviranje z motorjem, barva: rumena, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 3, Oprema: ABS, filter saj, klimatska naprava, nizka raven hrupa, računalnik na krovu, tempomat, zapora diferenciala, DAF CF 370 4X2 sedlasti vlačilec Prva registracija: 2/2016 Le 84.800 km z dokazili! Euro 6 emisijski razred Kratka kabina Avtomatski menjalnik Klimatska naprava Pomočnik za ohranjanje voznega pasu Prilagodljiv tempomat Zračno vzmetenje zadnje osi Medosna razdalja 3700 mm Pnevmatike 315/80 R22.5, profil približno 80 % Lastna masa 7.090 kg Nemško vozilo iz prve roke, lepo ohranjeno. Nov tehnični pregled (TÜV). Fsdpfxjyzg R Ee Aplegb Izvoz/neto cena: 27.900 EUR Vse informacije brez garancije, pridržane so napake.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Ranges Chuck diameter: 150 mm Chuck actuation: Hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Bar capacity diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tool positions: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous-duty drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool holder height/width (square): 20 x 20 mm Max. boring bar holder diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety device • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling operator panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 interface, USB port, and 230 V power outlet • Electromagnetic compatibility (EMC) • Six leveling feet • Operator's tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant detection and machining • ShopTurn step programming • Manage network drives • 3-D simulation • Graphic tracking Control • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways • Robust flat-bed guides Ball Screw • High rapid traverse speeds in all axes Fedoymkwrjpfx Aplegb • Reduced wear • High positioning and repeat accuracy

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 999.990 km, prva registracija: 08/1997, vrsta goriva: dizel, velikost pnevmatike: 315/80R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 620 l, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, število prestav: 16, emisijski razred: euro2, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 13.000 kg, Leto izdelave: 1997, Oprema: ABS, električno upravljanje oken, klimatska naprava, spojler, zapora diferenciala, = Dodatne možnosti in oprema = - 2 ležišči - 600-litrski rezervoar za dizel - Ogrevana zunanja ogledala - Voznikov udobni sedež - Strešni spojler - Omejevalnik hitrosti - Radio/CD predvajalnik - Spalna kabina - Senčnik - Ročni menjalnik ZF16 Fodpfxox H Sr So Aplsgb = Opombe = DOBRO OHRANJEN DAF FT95-380XF SPACECAB 4x2 VLAČILEC (EURO 2) Z ROČNIM MENJALNIKOM ZF16, STREŠNIM SPOJLERJEM IN KLIMO!! 380 KM, EURO 2 (MEHANSKA ČRPALKA IN VBRIZGALKE)!! ROČNI MENJALNIK ZF16!! 620-LITRSKI REZERVOAR ZA DIZEL!! KLIMA!! SPOJLER NA KABINI!! IPD!! TOVORNJAK JE V DOBREM VOZNEM STANJU, PRIMEREN ZA TEŽKA DELA!! VEČ DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) NA ZALOGI ZA PRODAJO!!