Calende Richtpresse nakup rabljenega (144)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Rabljen stroj za termično laminiranje Ecotack. Največja velikost lista: 102 x 142 cm. Največja hitrost: 75 m/minuto. Opremljen z vakuumsko enoto za natančno pozicioniranje. Premer valja: 450 mm, z ogrevanim središčem. Naprava za dviganje valjev. Avtomatski ločevalnik. Rezervni valj s gumijasto prevleko. Avtomatski ločevalnik. Hladilni valj s hladilnikom. Nljdjzt R Enjpfx Anpeh Valj za obdelavo tankega papirja. Avtomatski stapljalnik.

Stanje: rabljeno, Leto izdelave: 2008, ALLGEMEINE TECHNISCHE DATEN: Leistung Mechanische Geschwindigkeit: bis zu 450 m/min Produktionsgeschwindigkeit: abhängig von Substraten und Klebstoffsystem Bahn & Abmessungen Maximale Bahnbreite: 1330 mm Nlodpfx Asy Er A Ujnpjh Maximale Laminierbreite: 1315 mm Minimale Bahnbreite: 600 mm Rollenspezifikationen Maximaler Rollendurchmesser: • Abwickler: 1000 mm • Aufwickler: 1000 mm Kerndurchmesser: • Abwickler: 3" / 6" (76 / 152 mm) • Aufwickler: 6" (152 mm) Bahnnspannung Abwickeln: 500 N Aufwickeln (mit Kegelspannung): 550 N Elektrische Daten Spannung: 3 × 400 V ±10 %, 50 Hz (ohne Neutralleiter) Installierte Gesamtleistung: 85 kW Maximaler Eingangsstrom: 120 A Hauptschalter: 150 A Pneumatische Anforderungen Betriebsdruck: 6 – 9 bar Verbrauch: 70 l/min Anschluss: 1/2" Hydrauliksystem Druck: 3 bar Kühlmittelverbrauch: bis zu 2700 l/h Anschluss: 1/2" Kühlsystem Wasserdruck: max. 5 bar Wassertemperatur: 15–20°C Temperaturdifferenz: 4°C Druckdifferenz: 2,5 bar Durchflussmenge: 2000 l/h Maschinenkonfiguration • Schachtloser Abwickler (primär & sekundär) • Schachtloser Aufwickler • Automatisches Bahnführungssystem • Klebstoff-Dosiersystem (5-Walzen-Auftragswerk) • Laminierwerk mit Andruckrollen • Kühlkalander • PLC-gesteuertes Antriebssystem • Touchscreen-Bedienoberfläche Verarbeitbare Materialien • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA • PET / PETP • PP (Cast) • Papier Materialstärkebereich Folien: ca. 7 – 200 µm (materialabhängig) Papier: 40 – 200 g/m² Arbeitsbedingungen Temperatur: 10 – 40°C Luftfeuchtigkeit: 30 – 90 % (nicht kondensierend) Zusätzliche Ausstattung • Optionaler Wasserkühler: ca. 21 kW Kühlleistung • Geschlossenes Kühlsystem möglich Steuerung & Automatisierung • SPS-Steuersystem • Umrichtergesteuerte Motoren • Rezepturspeicher (bis zu 500 Aufträge) • Produktionsüberwachung (Geschwindigkeit, Laufmeter, Bahntension) • Not-Aus-System

Stanje: novo, NEW MACHINE Numerical performance control with NX Cut System software and NX Pareto Optimizer Barcode labeler with software Cutting length: 3800 mm Cutting width: 3800 mm Blade projection: 90 mm Front panel loading and unloading Automatic lateral aligner positioned in the saw carriage No. 1 fixed front table made of bakelite with air cushion system for unloading panels No. 2 mobile front tables made of bakelite with air cushion system for unloading panels Main saw blade, max. diameter 380 mm, 15 kW motor Scoring blade, max. diameter 200 mm Saw carriage speed, forward: 1–90 m/min – reverse: 120 m/min Pusher speed: 85 m/min Pusher carriage with 9 clamps Nljdpforufznjx Anpjh

Leto izdelave: 1997, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, Popolna ekstrudijska linija za proizvodnjo PVC termoplastične folije, posebej zasnovana za aplikacije z nalepkami, ki se ovijajo okoli izdelka. Stroj je bil izdelan leta 2022 pri podjetju RL Plastproject (Italija), je popolnoma nov, še nikoli ni bil nameščen in je takoj na voljo. Tehnične specifikacije: Izdelek: PVC termoplastična folija za ovijanje Material: Trden PVC, suha zmes Ekstruder: Enospiralni z odzračevalnikom in gravimetričnim doziranjem Proizvodnja: približno 180–200 kg/h Debelina folije: 40–80 mikronov Uporabna širina folije: do 620 mm Širina matrice: 900 mm Hitrost linije: do 60 m/min (odvisno od folije) Hlajenje: Kalander s hladilnim valjem Usmeritev: Enota za prečno termično oblikovanje Corona obdelava: Vgrajena Navijanje: Dvojna pozicija za rezanje in navijanje Nodpfx Anjw Ahfgopolh Nadzor: Siemens PLC s zaslonom HMI Nameščena moč: ~220 kW (potrebno potrditi) Potreba po zraku: 6 bar Mere: približno 25 x 6 metrov

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line Nedpfx Aneilqvropelh For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Leto izdelave: 1991, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L7-614-14H, LINIA PRODUKCYJNA DO PRODUKCJI SERWETEK 330 X 330 MM SKŁADANYCH NA ¼. Njdswnyatepfx Anpelh CENA: MASZYNA DRUKUJĄCA Producent: Hobema Model: 14 H Numer seryjny: L7-614-14H Rok produkcji: 1991 WYPOSAŻENIE 1. Podwójny odwijak do rolek o szerokości do 1500 mm z podnośnikiem • tuleja na rdzeń R 70 lub 76 mm • maksymalna waga rolki 200 kg • napęd pojedynczym silnikiem z wielorowkowym paskiem napędowym • regulacja prędkości przez tańczący napinacz • automatyczne zatrzymanie maszyny na końcu rolki • system odpylania 2. Zespół kalandrowania • do wyrównywania grubości bibuły, redukcji pylenia, poprawy jakości druku • napęd z centralnego silnika • utwardzane i szlifowane cylindry 3. Prostowarka taśmy Nr I • prostowarka FIFO przed stacją drukującą 4. Drukarka fleksograficzna • jedno wieżowe stanowisko drukujące do maksymalnie pięciu (5) zespołów drukujących • ruchoma platforma obsługowa do obsługi zespołów drukujących • panel operatora z przyciskami • maksymalny zakres formatów 330 mm • jeden centralny silnik dla wszystkich drukarek • motoryczny 360° radialny rejestr • wałek rastrowy z powłoką ceramiczną • jeden zestaw cylindrów montażowych na serwetki w formacie 330 mm (Lunch) • zewnętrzne pompy powietrza do podawania farby • podnoszenie i opuszczanie wanienek farbowych • pokrywy ochronne, wyłączniki bezpieczeństwa 5. Lampa stroboskopowa do kontroli nadruku 6. Urządzenie do suszenia na podczerwień • jedna kaseta grzewcza IR z regulacją temperatury • jeden wentylator do chłodzenia kasety • automatyczne wyłączenie przy końcu roli materiału 7. Prostowarka taśmy FIFO Nr II do tłoczenia 8. Dwustanowiskowa stacja tłoczenia • dwupozycyjna stacja tłocząca • dwa zestawy wałków tłoczących – formaty: Lunch 330x330 mm, okrągłe 330x330 mm 9. Rama składania pionowego z nożem tnącym 10. Głowica składania na ¼ 11. Dwukierunkowy odbiór produktu i automatyczny transfer do maszyny pakującej 12. Instalacja elektryczna DANE TECHNICZNE Maksymalna prędkość druku: 300 m/min Rzeczywista prędkość druku: 230 – 250 m/min Napięcie zasilania: 230 / 400 V, 3 fazy + PE, 50 Hz Sterowanie – Siemens S5 Maksymalna moc: 120 kW DANE ELEKTRYCZNE Napięcie zasilania: 230 / 400 V, 3 fazy + PE, 50 Hz Maksymalna moc: 30 kW.

Leto izdelave: 1992, stanje: pripravljen za uporabo (rabljen), Max. working width: 1800 mm, heating capacity: 111 kW, control system: Siemens SIMATIC 5, length: 22,000 mm, height: 4,500 mm. Comes equipped with trolley, unwinding station, material accumulator, turning frame, platform, supporting frame, vibrating trough feeder, spreading roller, feed rollers, scattering machine, powder feeding device, IR emitters, pyrometer, calender unit, turret winder, cross-cutting device, additional components and accessories, including comprehensive documentation. Suitable for all web-shaped materials such as foams, nonwovens, textiles, paper, etc. Open coatings can also be applied, such as powder/adhesive coatings that can be reactivated later (e.g., preparation for thermoformed parts). The machine can also produce stiffening nonwovens used for reinforcing shirt and jacket collars. On-site inspection possible. The machine was completely overhauled about ten years ago and has seen little use since then. Nljdpfjq Ixgljx Anpsh

Stanje: rabljeno, Leto izdelave: 1995, Stroj VITS QRV Variocut, letnik 1995, ima format 1020 mm, trenutno je na zalogi in se nahaja v Nemčiji. Opremljen je s širino koledarja 1020 mm in je tipa Micromatic, primeren za obdelavo papirja med 65 in 120 grami. PC in krmiljenje rezalnih robov sta bila zamenjana leta 2012. Stroj dosega največjo hitrost 220 metrov na minuto z registrovnim krmiljenjem in je opremljen z enoto za vtiskovanje iz leta 2005. Nudi natančnost reza +/- 0,3 mm in uporablja PC-krmiljenje Unico. Dobavni pogoji so FCA. Format: 1020 mm Oprema: - rabljeni rezalnik pločevine - s PC krmiljenjem Unico - Tip: Micromatic - PC in napredna krmiljenja zamenjana leta 2012 - Enota za vtiskovanje, letnik 2005 - Širina koledarja 1020 mm - Največja hitrost stroja 220 m/min z registrovnim nadzorom Njdpfxjvfx Dyj Anpolh - Natančnost reza: +/- 0,3 mm - Teža papirja: maks. 65–120 gramov

Stanje: novo, Leto izdelave: 2025, VEZNA LINIJA ZA KALENDARJE 70 cm Njdpsfdzwnsfx Anpjlh Linijo sestavljajo naslednji stroji: 1. MAGRAF LUKNJAČ EP-70 2. MAGRAF POLAVTOMATSKI VEZALNI STROJ AS-70

Stanje: novo, stiskalna sila: 400 t, HIDRALMAC Portal Straightening Press – 400 t – Column Width 3,400 mm – Traversing Bridge For sale is a hydraulic portal straightening press manufactured by HIDRALMAC with a pressing force of 400 t. This machine is designed for heavy-duty straightening and forming tasks and features a large-sized, traversing bridge as well as a cylinder with lateral travel. Thanks to its robust construction and high flexibility, it is ideally suited for large-format workpieces and demanding industrial applications. ==== Technical Data + Information: Hydraulic Portal Straightening Press – 400 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Portal Straightening Press - Machine designation: Straightening Press - Design: Portal Press - Pressing force: 400 t - Machine weight: approx. 49 t - Dimensions (L × W × H): 7,900 × 5,500 × 4,300 mm ==== Working Area Nljdpfx Asfhcc Rsnpeh - Column width: 3,400 mm - Max. distance table – ram: 1,000 mm - Table height above floor: approx. 700 mm - Stroke: 500 mm ==== Movement & Flexibility - Bridge travel: 5,000 mm - Lateral travel of cylinder: 2,800 mm - Bridge traversing speed: 0–33 mm/sec - Cylinder lowering speed: 0–10 mm/sec - Cylinder stroke speed: 0–25 mm/sec ==== Hydraulics & Performance - Total power requirement: 55 kW - Pump capacity: max. 131 l/min - Retraction force: 26 t - Oil tank: 700 l ==== Construction & Equipment - Reinforced table at the front section (reinforcement over 1,500 mm, additional weight approx. 4,000 kg) - Protective covers for the drive motors of the bridge - Signal lamps on both right and left with protective covers - Gratings (galvanized) inside the drip tray ==== Application & Features - Robust design for heavy straightening operations - High flexibility thanks to traversing bridge and cylinder - Suitable for large and heavy workpieces ===== Straightening work, heavy forming, large components, steel construction, mechanical engineering Hydraulic press, straightening press, portal press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German machinery directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply fully with Brazil’s national safety directive NR 12, which builds upon those standards. Our main strength lies in custom machine building and press automation. We supply tailored hydraulic presses at surprisingly attractive prices. For the hydraulic system, we primarily use components from leading European manufacturers.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Boben hladilnik CCn-120/70 za praškaste premaze Nsdpfsw Snfdsx Anpelh Glavna enota, vključuje: • Hladilni koledar z inox pokrovom, jeklenim trakom in drobilno enoto • Dodatni tesnilni deli robov • Glavni okvir iz nerjavečega jekla, tirnice po standardu Akzo • Dodatno varnostno stikalo za nadzor delovnega položaja • Rezervoar za zbiranje vode iz nerjavečega jekla • Zračni nož in gumijasto strgalo • LEV stožec v zgornjem delu ohišja drobilca • LEV lijak za izhod izdelka • Drsni pokrov za koledarjem • Lototo stikala z ujetim ključem za drobilec in pokrov koledarja • Integracija programske in strojne opreme za varnostno stikalo varnostne vstopne enote, vključno z razširitvijo varnostnega PLC. Varnostno stikalo BBA Innova, ostala strojna oprema s strani stranke.

Stanje: rabljeno, Stroj za izsekovanje za koledarje in beležke / Stroj za izsekovanje za koledarje in beležke Stroj za izsekovanje / Stroj za izsekovanje koledarjev in blokov – Plastograph PZ 599 Letnik / Leto izdelave: 1998 Širina obdelave / Delovna širina: 120 – 600 mm Dolžina papirja / Dolžina papirja: 100 – 550 mm Minimalna širina obdelave: 95 mm – maksimalna širina obdelave: 600 mm Število udarcev, nastavljivo / Število udarcev, nastavljivo: 30 – 120/min Naprava za podajanje plošč / Naprava za podajanje plošč 5 izsekovalnih orodij / 5 izsekovalnih orodij: Vrste Wire-O 2:1 / 3:1 – plastični učinek / 3:1 4x4 mm / 3:1 4x6 mm Orodje 4x4 mm z luknjo za koledar / Orodje 4x4 mm z luknjo za koledar Naprava za izmet / Naprava za izmet Upravljanje in nadzor preko nadzorne plošče Spletni pregled preko videoposnetka z uporabo WhatsApp – MS Zoom – Telegram Na zalogi v Emskirchenu/Nürnbergu – na voljo takoj – možnost preizkusa Nsdezuz R Depfx Anpolh

Stanje: dober (rabljeno), Leto izdelave: 1993, Hymmen Laminating Line Njdpsilqwajfx Anpolh For all inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approx. 600 mm Line speed: 21 m/min constant (smooth speed control, upgraded with new inverters and drive motors, new software and control system installed) The line includes: - manual loading and unloading - top and bottom brushing machine - pre-heating lamps (top and bottom) before glue application rollers - PVAC glue applicator - additional drying lamps (top and bottom) - steel calender roller press line

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Wide slot die Serial No.: L 1081-041391 // Smoothing unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film line with 1080 mm usable width Equipment / Further details: Max. gross PP output up to 1000 kg/h with film width up to 1200 mm Special feature: winder system allowing the slitting of narrow films (150 mm - 100 mm) or, for example: 8 x 175 mm or 2 x 700 mm A die lip for maximum film thickness up to 2 mm, up to 1000 kg/h. Total power consumption: 211 kW/h Main motor capacity: 250 kW Min. film thickness in PS: 0.68 mm / Min. in PP: 0.75 mm Maximum calender speed: 50 m/min mechanically possible Consisting of: - Maguire 5-compartment dosing unit - Extruder (screw dia. 160 mm) Amut EA 160 // Year: 2003 - Screen changer (for cleaning in food production) - Melt pump - Wide slot die (1 insert) 120 cm - Die lip for film thickness up to 2 mm, up to 1000 kg/h Nlodpfew Tbr Hjx Anpsh - Calender 140 cm - Thickness gauge SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) - Winder (film buffer during roll change) - Cutting machine & film haul-off - Film winding unit (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete available infrastructure: control cabinets, pumps etc.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Extrudeuse de laboratoire/d’essai AM-20 avec tête plate / filière à film et unité de calandrage Extrudeuse compacte et verticale de laboratoire ou de recherche AM-20 pour le traitement de divers plastiques comme PP, PE, PS, ABS, PVC et autres granulés plastiques. Nodsyyw T Uspfx Anpslh La machine est équipée d’une tête plate (filière à film) et convient particulièrement à l’extrusion de films, aux essais matériaux, aux essais de couleur et de mélange ainsi qu’aux applications de développement en laboratoire ou atelier technique. L’équipement de calandrage est également compris, comme visible sur les photos. Données techniques : • Modèle : AM-20 • Tension : 110 V / 220 V • Tension d’alimentation : 2 x 220 V • Puissance : 1000 W • Diamètre de vis : 20 mm • Rapport L/D : 15:1 • Débit : env. 500–1000 g/h • Dimensions : 45 x 25 x 60 cm Convient pour : • Extrusion de films • Essais de laboratoire et de développement • Développement de matériaux • Essais de couleur et de mélange

Stanje: novo, OMEC 3-roll Mechanical Symmetrical Plate Rolling Machine with Double Pre-bending Brand New “CE” Made in Italy WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAXIMUM BENDING THICKNESS 1.5 x D: 4 mm MAXIMUM BENDING THICKNESS 3 x D: 4.5 mm MAXIMUM BENDING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 kW WEIGHT: 1700 kg The FX3-3 series stands out among mechanical asymmetric 3-ROLL plate rolling machines with simple FULL FEEDING SYSTEM. The side roll (bending roll) comes standard with steel supports, bearings, and external bronze pads ensuring maximum reliability and minimal friction over time. The roll rotation is applied to the UPPER and LOWER rolls via a gear reducer and self-braking motor. Sheet metal feeding and clamping use top-quality motors and reducers. Equipped with hardened rolls, motorized movement and clamping, preparation for profile bending rolls, and a conical forming device directly on the upper roll, these machines offer an outstanding balance between absolute quality and operator-friendly use for a variety of cylindrical and conical bending applications. The top roll opens laterally for easy removal of the rolled shell as standard. MACHINE CONFIGURATION: - MOTORIZED UPPER and LOWER ROLLS with equal power for rotation - MOTORIZED SIDE ROLL for up/down movement - MOTORIZED SHEET CLAMPING - DIGITAL POSITION INDICATOR for side roll position - DIGITAL INDICATOR for sheet clamping position - ROLL HARDENING HRC 55/60, 2mm depth - Side roll supports: steel + shielded bearings + external bronze pads - PRE-ARRANGEMENT FOR SIDE ROLL INCLINATION to form cones (conical device excluded) - EXTERNAL SIDE ROLL INCLINATION LEVER (right) for FX3.2/FX3.3 – (right & left) for FX4.1/FX4.2 - PRE-ARRANGEMENT FOR PROFILE BENDING ROLLS - 2-PEDAL FOOT SWITCH + side roll up/down control and sheet clamping + emergency stop mushroom - ELECTRONIC PHASE CONTROL for power supply - ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS SUPPLIED WITH THE MACHINE: - Front conical device on the upper roll Nedpfxegyk S As Anpelh - Digital indicator for side roll position - Digital indicator for sheet clamping position

Leto izdelave: 1981, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Nedeu Ttf Nopfx Anpslh Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Net roller width: 1,100 mm (max. film width) Take-off unit and flying shears

Stanje: pripravljen za uporabo (rabljen), Glavu za šivanje petlji za kalendarske kuke Nlsdpfxeir A Hpe Anpeh