Anayak Anayak Vh Plus-2000 nakup rabljenega (13.016)

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Delovna miza AT 2000 z bukovo ploščo in predali TOP delovna pekarska miza na kolesih Dsdsxvkxyopfx Ab Hokn Delovna plošča iz bukovega lesa z zadnjo galerijo Blok predalov levo Desno 2 odlagalni polici Robustna izvedba iz nerjavečega jekla Mere pribl.: 2000 x 800 x 980 mm (ŠxGxV) Rabljena naprava, očiščena Opcija: Dostavna služba Nova kolesa / koleščki

Stanje: rabljeno, številka stroja/vozila: 739791201, Sheet width: 2040 mm Sheet thickness: 3.25 mm Frame width: 2200 mm Total power requirement: 7.5 kW Space requirement approx.: 2.55 x 2.3 x 1.4 m - Rear gauge - Front support arms - Emergency stop - Foot switch - Piece counter Dsdpfxocxxtys Ab Hokn

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 46922, Sheet width: 2,050 mm Sheet thickness: 1.5 mm Frame width: 2,100 mm Throat depth: 100 mm Table width: 300 mm Strokes per minute (under load): 50 Total power requirement: 4.0 kW Machine weight approx.: 1.85 t Dkedscxxraopfx Ab Hjn Equipment: - Manual backgauge 550 mm - 1 side gauge - 2 support arms - Foot switch

Stanje: rabljeno, številka stroja/vozila: 33548, Swing diameter over bed: 533 mm Swing diameter over carriage: 340 mm Turning length: 2000 mm Centre height: 270 mm Swing diameter in gap: 720 mm Spindle bore: 80 mm Number of spindle speeds: 12 Speed range: 25 - 1500 rpm Feeds: 76 Cross slide travel: 110 mm Quill travel: 360 mm Spindle taper: MT 4 Dksdjcxxucepfx Ab Hon Bed width: 370 mm Approx. machine weight: 2.87 t Approx. required space: 4.1 x 0.95 m

Stanje: rabljeno, Leto izdelave: 1972, Swing diameter over bed: 980 mm Swing diameter over support: 600 mm Turning length: 2200 mm Swing diameter in gap: 1200 mm Gap length: 450 mm Number of spindle speeds: 24 Spindle speed range: 8 – 800 rpm Spindle bore: 150 mm X-axis travel: x = 2000, x² = 350 mm Y-axis travel: 500 mm Number of thread pitches: 398 Thread pitch (metric): 0.5 – 224 mm Thread pitch (modular): 0.25 – 112 mod. Thread pitch (TPI): 56 – 1/8 TPI Thread pitch (DP): 112 – 1/4 D.P. Number of feeds: 108 Longitudinal feed: 0.032 – 15.2 mm/rev Cross feed: 0.016 – 7.6 mm/min Tailstock quill: MT6 Quill stroke: 380 mm Voltage: 380 V Frequency: 50 Hz Dkjdpscxxqlefx Ab Hen Total power requirement: 25 HP Machine weight approx.: 7.9 t Space requirement approx.: 4.4 x 1.8 x 1.7 m Precision gap bed and lead screw lathe PBR type TM 450/2000 equipped with: - 500 mm original Forkardt 3-jaw chuck - Hardened and ground bedways - Rapid traverse for longitudinal and cross feeds - Spindle brake - Feeds: Longitudinal: 0.03 – 15.2 mm/rev in 68 steps Cross: 0.016 – 7.6 mm/rev in 68 steps Longitudinal: 0.0011 – 0.54 "/rev in 68 steps Cross: 0.00055 – 0.27 "/rev in 68 steps - Thread cutting: Metric: 0.5 – 224 mm in 58 steps Modular: 0.25 – 112 mod. in 58 steps Imperial: 56 – 1/8 TPI in 68 steps DP: 112 – 1/4 D.P. in 68 steps - Original Sauter hydraulics system with powerful external oil supply - Original Ideal tool holder - Faceplate with 4 independent jaws - Coolant system - Magnetic clutch - Automatic longitudinal stops - Cross stop - Thread dial indicator - Reducing sleeve - 2 fixed centers - Fixed steady rest - Swiveling original Staudacher spindle guard with safety switch - 2x emergency stop - Main switch - Chip collector - Workpiece lighting - Complete electrical system integrated in a machine-mounted control cabinet.

Stanje: rabljeno, Leto izdelave: 1992, maks. širina reza: 5300 mm, maks. višina reza: 2200 mm, premer žaginega lista: 300 mm, maks. debelina obdelave: 80 mm, odprtina žaginega lista: 30 mm, spodnja podpora: togi valji, nagib žagine glave: ročno, podajanje žage: avtomatsko, odsesavanje: zunanje odsesavanje, teža cca.: 1500 kg, moč motorja: 5,5 kW Dodpovvkq Tjfx Ab Hekn Lokacija skladišča: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Dedpfsw A Nnpex Ab Hokn

Stanje: rabljeno, prevoženi kilometri: 8.900 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.100 kg, prva registracija: 05/2025, naslednji pregled (TÜV): 01/2028, poraba goriva (mestna vožnja): 7,4 l/100 km, poraba goriva (izven mesta): 7,4 l/100 km, poraba goriva (kombinirana): 7,4 l/100 km, Izpusti CO₂: 194 g/km, emisijski razred: Euro 6, barva: srebrn, vzmetenje: jeklo, število sedežev: 6, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, filter saj, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, tempomat, VR9 STYLE, E07 Hill Start Assist, E2Q MBUX Augmented Reality for Navigation, E7H MBUX Multimedia System High, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, JB7 Park Package with Reversing Camera, Q50 Removable Tow Bar with Ball Head, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Logo, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, LG4 Rear, Brake and Indicator Lights in LED Technology, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver’s Seat, SE4 Lumbar Support Passenger Seat, T70 Child Safety Locks on Rear Passenger Doors, ZC6 Sales Code 1, T74 Grab Handle for Entry, Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, 805 AEJ X4/1, VL2 Velour Floor Mats, H00 Warm Air Duct to Passenger Compartment, C6L Multifunction Steering Wheel, Z42 Registration as Passenger Car, C74 Illuminated Mercedes-Benz Entry Sill, J55 Seat Belt Warning for Passenger Seat, XA8 Weight Variant 3,100 kg, EL9 2-Way Speakers Front and Rear, SH2 Thorax-Pelvis Sidebag Passenger, SH1 Thorax-Pelvis Sidebag Driver, SH8 Windowbags for Driver, Passenger, and in the Rear, H20 All-round Heat-insulating Glass, JW8 ATTENTION ASSIST, Y44 Warning Triangle, RG7 Tyres 225/55 R17, JX2 Maintenance Interval 40,000 km, FP3 Mirror Package, BH1 HOLD Function, WA8 Factory Code 157, SZ8 Storage Net Passenger Seat Backrest, SZ7 Storage Net Driver Seat Backrest, JH3 Communication Module (LTE) for Digital Services, X30 Registration. We would be happy to provide you with an individual financing or leasing offer and will accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition in accordance with age/mileage; localised repainting carried out as part of vehicle preparation. No liability for printing or typographical errors. Errors and prior sale reserved ... more on our homepage. Dedjx S D Hljpfx Ab Hekn

Stanje: rabljeno, prevoženi kilometri: 8.450 km, moč: 174 kW (236,57 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, prva registracija: 04/2025, poraba goriva (mestna vožnja): 7,5 l/100 km, poraba goriva (izven mesta): 7,5 l/100 km, poraba goriva (kombinirana): 7,5 l/100 km, Izpusti CO₂: 196 g/km, emisijski razred: Euro 6, barva: črn, vzmetenje: jeklo, število sedežev: 6, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, filter saj, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, tempomat, VR9 STYLE, E07 hill start assist, E2Q MBUX Augmented Reality for Navigation, E7H MBUX multimedia system High, E65 Burmester surround sound system, T56 electric operation for left sliding door, T55 electric operation for right sliding door, JB6 parking package with 360 camera, EY5 Mercedes-Benz emergency call system, BS1 brake calipers with Mercedes-Benz logo, EY6 breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, LG4 rear, brake and turn signal lights with LED technology, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 driver's seat lumbar support, SE4 passenger seat lumbar support, T70 child safety lock on passenger doors, ZC6 sales code 1, T74 entry grab handle, Y10 first aid kit, MJ8 ECO start-stop function, IB6 model series C447 Vito/V-Class, 805 AEJ X4/1, VL2 velour floor mats, H00 warm air duct to passenger compartment, C6L multifunction steering wheel, Z42 registration as passenger car, C74 illuminated Mercedes-Benz door sills, J55 seat belt warning for front passenger seat, XA8 weight variant 3,100 kg, RF1 Continental tire brand (10), SH2 thorax-pelvis sidebag passenger, SH1 thorax-pelvis sidebag driver, SH8 windowbags for driver, passenger and in the rear, H20 heat-insulating glass all around, JW8 ATTENTION ASSIST, Y44 warning triangle, JX2 service interval 40,000 km, FP3 mirror package, BH1 HOLD function, WA8 factory code 157, SZ8 storage net. We are happy to provide you with an individual financing or leasing offer and will take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further advice. Vehicle condition in line with age/mileage; parts of the vehicle may have been repainted as part of reconditioning. No liability for print or typographical errors. Subject to errors and prior sale. Click features may include digital extras that can be subscribed to with or without time limitation for a fee via MercedesMe. ... more on our homepage. Dsdpfx Aex S Uw Uob Hekn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2024, skupna višina: 950 mm, skupna dolžina: 880 mm, skupna širina: 3.075 mm, vrsta vhodnega toka: trifazni, Certificirano po DGUV do: 07/2027, Prelivna stroj Riehle Belma 2000 3 zavese za preliv iz nerjavnega jekla, premična z nagibno napravo za žemljice zelo robustna tehnika le pri nas, pregledano DGUV V3 Priključek: 400V, 16A-CEE vtič Dksdeyaf Eqepfx Ab Hjn Mere: 3075 x 880 x 950 mm (DxŠxV) Rabljena naprava, očiščena in SAB preverjena z garancijo in storitvijo za rezervne dele Opcije: Servisni paket Vzdrževalna pogodba Škatla rezervnih delov Dostavna služba Usposabljanje in zagon Na zalogi imamo še druge pekarske stroje!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 43.000 h, številka stroja/vozila: IntNr231372, STAR SA 16-12 CNC lange draaislijpmachine, bouwjaar 2000 CNC-besturing: FANUC 18i-T Bedrijfsuren: 43.000 Technische gegevens - Aantal assen: 5 - Aantal spindels: 2 HOOFDSPINDEL - Max. stafdiameter: 12 mm - Z-as verplaatsing: 140 mm Dsdjy U Hizspfx Ab Hokn - Spilsnelheid: 8.000 tpm - Spindelaandrijfvermogen: 2,2 kW - Aantal gereedschapsposities: 13 TEGENSPINDEL - Max. stafdiameter: 10 mm - Spilsnelheid: 8.000 tpm - Aantal gereedschapsposities: 4 FMB Minimag stangenaanvoermagazijn De machine kan na afspraak onder stroom worden bezichtigd. Wijzigingen, vergissingen in technische gegevens en specificaties, alsmede tussentijdse verkoop voorbehouden!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 44.000 h, številka stroja/vozila: IntNr231371, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm Dksdjy U Hiuepfx Ab Hjn - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool positions: 4 FMB Minimag bar feeder High pressure unit, 40 bar The machine can be inspected under power by prior arrangement. Technical data and specifications are subject to change, errors, and prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zelo dobro ohranjen stroj malo delovnih ur, Kontak možen tudi preko WatsApp, Govorimo Angleško Nemško in ex YU jezike. Strj se nahaja v Nemčiji. Vsa specifikacija mašine je v prilogi pdf Djdpfor Idkwox Ab Hokn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Suhi distribucijski transformator 1 kos 2000kVA, proizvajalec SGB Nemčija, pretvorba napetosti 22000 (± 2 x 2,5 %) / 400V, Dyn1, IP31 ali IP00, Al/Al, temperaturna ocenjevalna enota, delujoč, v delovnem stanju. Dkodpjlpd Tcjfx Ab Hon

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 210 mm, pomik osi Y: 100 mm, pomik po osi Z: 810 mm, število osi: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a dual-spindle design with a maximum Z-axis travel of 810 mm and an X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, and is suitable for complex turning and milling operations in multiple processes. If you are looking for high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill center that we have for sale. Contact us for further details. • Control/NC Dkedpszbkh Tofx Ab Hsn • Controller: MORI SEIKI MSX-701 • NC System: FANUC FS-31iA (MAPPS 3); MAPPS Version: 3 • Software/Features: Load monitoring; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electrical/Specification • Voltage: 380-480 V; Frequency: 50 Hz; Specification: Europe • Machine Configuration • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with driven tools • Lower turret with driven tools currently NOT operational (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main Spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: 8" hollow chuck; Chuck pass-through: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without locking); C-axis brake: Included • Sub Spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: 8" hollow chuck; Chuck pass-through: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without locking); C-axis brake: Included • Axis Travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: X-Y-Z axes; 16 stations; including milling function; Live tool speed: 6,000 rpm; Tool holder: Bolt mounting • Turret 2: X-Y-Z axes; 16 stations; Milling function equipped but NOT operational; Rotating tool speed: 6,000 rpm; Tool holder: Bolt mounting • Maximum length of rear tools: 155 mm (upper turret), 100 mm (lower turret) • Tool Presetting • Spindle 1, built-in tool presetting device: Manual (removable) • Spindle 2, built-in tool presetting device: Manual (removable) • Coolant/Chip Management (machine integrated) • High-pressure coolant unit: 635 W / 1040 W • Coolant type: Water soluble • Air blast through the spindle: Included • Chip discharge direction: Right • Interfaces • Bar feeder interface: Included (specification for multi-bar loading; LNS) • Robot interface: Included • Languages/Documentation • Manuals: Italian • Documentation: Installation, operation, and maintenance manuals; Declaration of conformity; CE certificate • Important Note • The driven tool function of the lower turret is defective on both machines. The T2 turret can currently only be used for turning operations. Additional Equipment • Automation/Handling • RR Robotica gantry loader (included) • Loading pallets (included) • Workpiece loader (Spindle 2 side) • Workpiece ejector

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 9.911 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 270 mm, pomik po osi Z: 310 mm, hitro pomikanje X-os: 75 m/min, hitri pomik os Y: 75 m/min, hitri pomik na osi Z: 75 m/min, nazivna (navidezna) moč: 17 kVA, skupna višina: 2.300 mm, skupna dolžina: 1.500 mm, skupna širina: 2.600 mm, skupna masa: 3.400 kg, največja hitrost vretena: 30.000 obr/min, nos vretena: HSK40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, CNC obdelovalni center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TEHNIČNE LASTNOSTI: Leto izdelave: 2006 CNC krmilje: FANUC 18i-MB5 Število osi: 7 Hod X osi: 450 [mm] Hod Y osi: 270 [mm] Hod Z osi: 310 [mm] Hitro pomikanje osi X, Y in Z: 75.000 [mm/min] Največji premer palice v vretenskemu ležaju: 32 [mm] Maks. št. obratov glavnega vretena: 8.000 [rpm] Maksimalna moč glavnega vretena: 12 [kW] Zasukna os A – hod: 360 [°] Natančnost pozicioniranja A osi: 0,001 [°] Nagibna os B – hod: -20° / +115 [°] Natančnost pozicioniranja B osi: 0,001 [°] Tip vretena: HSK40 Maks. hitrost vretena: 30.000 [rpm] Število mest v avtomatskem menjalcu orodij: 40 Obračanje kosa z robotom (obdelava 6. strani): Da Vmesnik RS232: Da Skupna priključna moč: 17 [kVA] Priključna napetost: 400 [V] Obratovalne ure: 9.911 [h] Dimenzije (DxŠxV): 1.500 x 2.600 x 2.300 [mm] Teža: 3.400 [kg] OPREMA VKLJUČENA: x1 merilna sonda RENISHAW TS27R y1 enota za hlajenje vretena x1 lovilec delov x1 rezervoar za hladilno tekočino x1 enota za obdelavo 6. ploskve (brez prijemalnega sistema) x29 držal za orodje tipa HSK40 BIG KAISER x10 vpenjalnih tulej tipa F37 SCHAUBLIN x1 pištola za pranje x1 tripolna signalna svetilka x1 navodila za vzdrževanje x1 električne sheme x1 navodila za upravljavca Dedpfx Absx Iiw Ie Hekn x1 programski priročnik Cena na zahtevo, nakladanje na tovornjak vključeno. Možnost dostave po vsem svetu. Podatki so bili pridobljeni po naših najboljših močeh, zato njihove natančnosti ne moremo garantirati. Stroj je primerljiv z znamkami kot so Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Upoštevati velja tudi stroje za notranje in zunanje brušenje (ID/OD). Površinski brus, stružnica, obdelovalni center, rezkalni stroj.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 270 mm, pomik po osi Z: 310 mm, hitro pomikanje X-os: 75 m/min, hitri pomik os Y: 75 m/min, hitri pomik na osi Z: 75 m/min, nazivna (navidezna) moč: 17 kVA, skupna višina: 2.300 mm, skupna dolžina: 1.500 mm, skupna širina: 2.600 mm, skupna masa: 3.400 kg, največja hitrost vretena: 30.000 obr/min, nos vretena: HSK40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, CNC obdelovalni center CHIRON FZ 08K S Magnum High Speed Plus (HSP) TEHNIČNE LASTNOSTI: Leto izdelave: 2007 CNC krmiljenje: FANUC 18i-MB5 Število osi: 7 Pomik v osi X: 450 [mm] Pomik v osi Y: 270 [mm] Dksdpfx Aoyq Nyyeb Hjn Pomik v osi Z: 310 [mm] Hitrost pomika v oseh X, Y in Z: 75.000 [mm/min] Največji premer palice v vretenu za struženje: 32 [mm] Obseg vrtenja osi A: 360 [°] Natančnost pozicioniranja osi A: 0,001 [°] Obseg nagiba osi B: -20° / +115 [°] Natančnost pozicioniranja osi B: 0,001 [°] Tip vretena: HSK40 Največje število vrtljajev vretena: 30.000 [min⁻¹] Število mest v izmenjevalcu orodij: 40 Potrebna priključna moč: 17 [kVA] Napajalna napetost: 400 [V] Dimenzije (DxŠxV): 1500 x 2600 x 2300 [mm] Teža: 3.400 [kg] VKLJUČENA OPREMA: x1 sonda za orodja RENISHAW, tip TS27R x1 enota za hlajenje vretena x1 rezervoar za hladilno tekočino x1 naprava za obdelavo 6. strani x1 vpenjalni primež SCHUNK x84 vpenjalnih tulec – tip HSK40 x14 vpenjal – tip F35 x1 klimatska naprava za elektro omaro x1 naprava za izsesavanje oljne megle DONALDSON – tip Torit DCE x1 pištola za izpiranje x1 tribarvna signalna svetilka x1 navodila za uporabo stroja x1 navodila za upravljavca x1 programski priročnik Stroj je mogoče videti pod napetostjo v naših prostorih po predhodnem dogovoru. Cena na zahtevo, nakladanje na tovornjak vključeno. Možnost pošiljanja po celem svetu. Podatki na tej strani so zbrani po naših najboljših močeh, zato ne jamčimo za njihovo popolno točnost. Stroji podobni Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas in Alzmetall, kot tudi CNC rezkalni, vrtalni, navojni in brusilni stroji.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 12.270 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 150 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 220 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, vrsta vhodnega toka: trifazni, skupna masa: 5.700 kg, nos vretena: JIS A2-5, vhodna napetost: 400 V, Število pogonskih postaj v orodnem revolverju 1: 10, Število orodnih postaj v orodnem revolverju 2: 10, CNC stružnica DMG MORI NRX2000 MC TEHNIČNE LASTNOSTI: Dkjdpsyzgc Usfx Ab Hsn Leto izdelave: 2017 CNC upravljanje: MITSUBISHI M730UM Maks. premer struženja: 150 mm Pomik v osi X: 100 mm Pomik v osi Z: 220 mm Hitrost hitrih pomikov os X1: 30.000 mm/min Hitrost hitrih pomikov os X2: 30.000 mm/min Hitrost hitrih pomikov os Z1: 30.000 mm/min Hitrost hitrih pomikov os Z2: 30.000 mm/min Vpenjalni nos vretena: JIS A2-5 Maks. dolžina obdelave na vretenu 1: 100 mm Maks. dolžina obdelave na vretenu 2: 100 mm Maks. hitrost vrtenja vretena 1: 6.000 vrt/min Maks. hitrost vrtenja vretena 2: 6.000 vrt/min Moč pogona orodij – revolverska glava 1: 1,5 kW Moč pogona orodij – revolverska glava 2: 1,2 kW Število orodnih postaj – revolver 1: 10 Maks. hitrost pogonskih orodij – revolver 1: 10.000 vrt/min Število orodnih postaj – revolver 2: 10 Maks. hitrost pogonskih orodij – revolver 2: 10.000 vrt/min Skupna potrebna moč: 38 kVA Napajalna napetost: 400 V Število delovnih ur: 12.270 h Teža: 5.700 kg DODATNA OPREMA: x1 portalni manipulator (gantry loader) x2 zalogovnika (levi in desni) za surovine in končane obdelovance x1 merilna tipala za obdelovance RENISHAW, tip RLP40 (NOVO) x1 senzor za zaznavanje zloma svedra (za revolver št. 1) x19 fiksnih držal za orodja x4 aksialna pogonska držala orodij x2 zbiralna vpenjala KITAGAWA, tip KLAMP DKF65 x2 trikraka vpenjalna glava x1 signalna svetilka za status stroja x1 pištola za hladilno tekočino x2 daljinska elektronska ročna kolesa (Jogwheel) x1 enota za odsesavanje oljne meglice x1 tračni transporter za odrezke x1 visokotlačna hladilna enota, 35 bar x1 SIEBEC filtrirna enota za rezalno tekočino, tip MP52D-AP18 x1 set grabilk za portalni manipulator x1 set pritrdilnih konzol za transport stroja x1 komplet navodil (uporabniški priročnik, priročnik za programiranje, elektro sheme, navodila za portalni manipulator...) Stroj je mogoče videti v obratovanju pri nas, po predhodnem dogovoru. Cena po dogovoru, nakladanje na kamion vključeno. Možna dostava po svetu. Podatki na tej strani so bili pridobljeni po naših najboljših močeh, zato za popolno točnost ne moremo jamčiti. Obdelovalni stroj primerljiv z obdelovalnimi centri tipa mill-turn, centri za obdelavo in rezkalnimi stroji ter z blagovnimi znamkami kot so Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC stružnica, NC stružnica, digitalna stružnica, obdelovalni center, NC rezkalni stroj, CNC rezkalni stroj, digitalni rezkalni stroj, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Stanje: dober (rabljeno), Leto izdelave: 2002, Robot Kuka KR150 Serija 2000 Leto izdelave: 2002 Djdobhgxbspfx Ab Hekn Doseg: 2700 mm Teža: 1245 kg Nosilnost: 150 kg Krmilnik: KRC2 Teža: 185 kg Programska verzija: V4.1.7 SP08 Kuka KCP2 Povezovalni kabli: 7m/15m 3626ä

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 2.200 obr/min, potovalna razdalja osi X: 280 mm, pomik po osi Z: 1.435 mm, moč vretenovega motorja: 15.000 W, skupna višina: 2.100 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 8287D, število osi: 2, This Wagner WDE 500 PLUS was manufactured in 2021. It offers a maximum turning diameter over bed of 500 mm and a spindle speed range of up to 2200 rpm. Equipped with a Siemens 828 B-T CNC control for enhanced precision and a spindle motor power of 15 kW, it is ideal for heavy-duty turning operations. The machine dimensions are 3400 × 1600 × 2100 mm, and it weighs approximately 5000 kg. For more information about this machine, please contact us. Machine Advantages Qualitative machine advantages: • Machine in excellent condition with very few operating hours Technical machine advantages: • Spindle rotation in both directions (right and left) Dksdpfx Ajzbcmnob Hon • Rapid traverse (Z, X axes): 15,000 mm/min • Repeatability: ±0.005 mm • Positioning accuracy: ±0.01 mm • Maximum distance between centers: 1500 mm • Bed width: 500 mm • Spindle nose: DIN 55029 KK8 • Linear guides on X and Z axes • Precision ball screws, hardened and ground • Telescopic cover on the Z axis Additional Information Tailstock: • Tailstock adjustment: manual • Quill travel: 100 mm Assembly Position (Mounting): • Electronic handwheels with incremental preselection • Feed lever with locking function • Rapid traverse override with selector switch • Movable control panel • Constant cutting speed Media: • Automatic central lubrication • Working lamp • Complete coolant system • Enclosure with 2 sliding doors and safety glass windows • 1 set of foundation bolts • CE conformity Control: • Siemens 828 B-T CNC control • ShopTurn operation with manual machine mode Dimensions: • Machine depth: 3400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, ESSEPIGI cutting machine Dsdpfxst Uk N Ns Ab Hjkn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Complete SCM line Dkjdpfot T Sq Esx Ab Hsn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna dolžina: 800 mm, skupna širina: 2.000 mm, skupna višina: 900 mm, Delovna miza AT 2000 z bukovo delovno ploščo in drsnimi vrati Premična pekovska delovna miza Delovna plošča iz bukovega lesa Drsna vrata Izvedba iz nerjavečega jekla Mere pribl.: 2000 x 800 x 900 mm, ŠxGxV Rabljena naprava, očiščena Delovna plošča pobrušena in na novo oljena Djdpsyunbqofx Ab Hekn Obiščite našo veliko razstavo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, Oprema: dokumentacija / priročnik, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Dkedpfx Abozbrxge Hon Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: rabljeno, Leto izdelave: 1992, Rabljeni stroj Leto izdelave: 1992 Premer žaginega lista: 290-300 mm Število vrtljajev žaginega lista: 4750 vrt/min Moč motorja: 4,5/5,5 kW Število vrtljajev motorja: 2880 vrt/min Maks. širina reza: 5300 mm Maks. višina reza: 2100 mm Maks. višina plošče: 2200 mm Maks. debelina obdelave: 80 mm Nosilec za majhne dele: Da Djdpfx Aboy Dkg Nj Hekn Transportne dimenzije pribl. 7000 x 2000 x 2600 mm Teža pribl. 1000 kg Razpoložljivost: takoj Lokacija: Röllbach