Alwid Solo-Korkenverschließer nakup rabljenega (156)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN 52xxxx, Leto izdelave: 2016, obratovalne ure: 1.613 h, nosilnost: 1.600 kg, dvižna višina: 4.400 mm, prosto dvigovanje: 1.434 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.145 mm, moč: 29 kW (39,43 KM), dolžina vilic: 1.150 mm, lastna masa: 2.987 kg, skupna dolžina: 2.314 mm, vrsta pogona: Diesel, gradbena širina: 1.110 mm, Diesel forklift Chassis number: FN 52xxxx Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic with manual shifting Condition: Refurbished, no warranty Crsdpfx Aeu D R N Nec Noc Technical condition: Very good Front tire type: Superelastic Front tire size: SE 6.50-10 Rear tire type: Superelastic Rear tire size: SE 18x7-8 Description: Refurbished by manufacturer, passed safety inspection (UVV), no warranty or liability for material defects Side shifter, integrated 3rd valve, rear work light, front work light, roof cover, front windscreen, load backrest, soot filter, full free lift, interior mirror, windscreen wiper, rear window, flashing beacon, Solo-Pilot (single lever), hydrostatic drive with manual reversal, reverse warning, refurbished by manufacturer

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN 54xxxx, Leto izdelave: 2017, obratovalne ure: 5.189 h, nosilnost: 2.500 kg, dvižna višina: 3.300 mm, prosto dvigovanje: 150 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.325 mm, dolžina vilic: 1.150 mm, lastna masa: 4.851 kg, skupna dolžina: 2.441 mm, vrsta pogona: Elektro, gradbena širina: 1.198 mm, Chariot élévateur électrique 4 roues Numéro de châssis : FN 54xxxx Credeu D R Ncepfx Ac Njc Centre de gravité de la charge : 500 mm Classe ISO : Classe ISO 2 = 1 000 - 2 500 kg Type de mât : Standard Transmission : Impulsion AC État : Révisé sans garantie État technique : très bon Type de pneus avant : Superélastique Taille des pneus avant : SE 225-75-10 Type de pneus arrière : Superélastique Taille des pneus arrière : SE 18x7-8 Batterie Volt : 80V Capacité de la batterie : 775Ah Fabricant de la batterie : IBV Type de batterie : PzS Année de fabrication de la batterie : 2026 Description : Révisé par le fabricant, une NOUVELLE batterie sera installée avant la livraison, contrôle de sécurité UVV effectué, sans garantie / responsabilité pour vices matériels Déplacement latéral, intégré 3ème distributeur hydraulique, phare de travail arrière, phare de travail avant, chauffage, grille de protection de charge, cabine complète, commande à impulsion, safety light, Solo-Pilot, rétroviseur intérieur, siège en tissu, pack Drive + Lift Plus, contrôleur de décharge, compteur horaire, une NOUVELLE batterie avec Aquamatik sera commandée et installée avant la livraison, chargeur externe compatible, révisé par le fabricant

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN 63xxxx, Leto izdelave: 2021, obratovalne ure: 2 h, nosilnost: 1.250 kg, dvižna višina: 3.100 mm, prosto dvigovanje: 1.455 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.090 mm, dolžina vilic: 1.150 mm, lastna masa: 2.818 kg, skupna dolžina: 1.736 mm, vrsta pogona: Elektro, gradbena širina: 990 mm, Electric 3-wheel forklift Cjdou D R I Espfx Ac Nerc Chassis number: FN 63xxxx Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: AC pulse control Condition: As new Technical condition: New Front tire type: Superelastic Front tire size: SE 18x7-8 non-marking Rear tire type: Superelastic Rear tire size: SE 18x7-8 non-marking Battery voltage: 24V Battery capacity: 875Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2021 Description: As-new demonstration unit, sold without warranty/liability for material defects, UVV inspection approved Sideshift, integrated 3rd valve, rear work light, front work light, load backrest, pulse control, full free lift, CE certificate, safety light, non-marking tires, solo-pilot control, comfort display, panoramic mirror, document holder with lamp, battery (01/2021) with Aquamatik, suitable external charger included

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN 54xxxx, Leto izdelave: 2017, obratovalne ure: 988 h, nosilnost: 3.000 kg, dvižna višina: 3.100 mm, prosto dvigovanje: 1.450 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.240 mm, dolžina vilic: 1.200 mm, lastna masa: 5.275 kg, skupna dolžina: 2.317 mm, vrsta pogona: Elektro, gradbena širina: 1.198 mm, Electric 4-wheel forklift Chassis number: FN 54xxxx Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Transmission: AC Inverter Codpeu D R Sqsfx Ac Nerc Condition: Refurbished, no warranty Technical condition: Very good Front tire type: Superelastic Front tire size: SE 250-60-12 non-marking Rear tire type: Superelastic Rear tire size: SE 200-50-10 non-marking Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: SBS Battery type: PzS Battery year: 2017 Description: Serviced, technically and visually refurbished, with UVV inspection, without liability for material defects/warranty Sideshift, attached 3rd valve, 4th valve, rear work light, front work light, half cab, impulse control, full free lift, safety light, 5th valve, non-marking SE tires, Solo-Pilot (single lever control), fabric seat, panoramic mirror, discharge monitor, hour meter, battery (07/2017) with Aquamatik, external charger

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN 51xxxx, Leto izdelave: 2016, obratovalne ure: 3.776 h, nosilnost: 1.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.455 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.090 mm, dolžina vilic: 1.150 mm, lastna masa: 3.203 kg, skupna dolžina: 1.785 mm, vrsta pogona: Elektro, gradbena širina: 1.070 mm, Electric 3-Wheel Forklift Chassis number: FN 51xxxx Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC impulse Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: SE 18x7-8 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: SE 18x7-8 Rear tires condition: 80 - 100% Battery voltage: 24V Battery capacity: 1000Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: Professionally refurbished by the manufacturer, UVV-tested, sold without warranty or liability for material defects Sideshift, Fitted with quick couplings 3rd valve, roof cover, impulse control, full free lift, Beacon, Solo-Pilot (single lever), interior mirror, battery (regenerated by the manufacturer 11/2023) with Aquamatik, matching external charger Credpfx Acjrba Tts Njc

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) Csdpfx Acjd Nt Rqo Nerc - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in one line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 0.4 - 12 Panel thickness (min/max) mm: 8 - 100 Working width (min/max) mm: 240 - 3000 Control system: Power Control PC22 (Windows XP) Software woodCommander Feed speed (adjustable) (m/min): 10 - 40 Safety and sound-insulation cabins Retractable positioning stops, distance (mm): 400 FORMAT PROCESSING (for each side): Jointing milling unit (2 x 6.6 kW) Open space Left side only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + premelter) E34 Pressure roller track (revolver type) for straight and shaped (softforming) edges, GL sextuple Edge magazine for coils (1 slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°-30°) Milling unit (2 x 0.55 kW) 0°-30° Contour copying unit (tracing) FF12 (4 motors) WD70 20 m/min Cjdpfx Acett Iudo Nerc Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section FORMAT PROCESSING (for each side): - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A Crodpfxsv Rpdns Ac Njc - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2002, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 1300229, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, moč: 1,8 kW (2,45 KM), Usato insaccatore sottovuoto continuo Iozzelli, modello X130, anno di costruzione 2002, funzionante ma necessita di riparazione e attenta verifica. Alimentazione elettrica: 1,80 kW, 50 Hz, 400V. Numero di serie: 1300229. Insaccatrice sottovuoto continua adatta a piccoli e medi produttori. Questo modello è dotato di tramoggia da 130 litri per il carico manuale. Nota: Il tasto di regolazione della velocità non funziona; attualmente la macchina lavora solo a bassa velocità, senza possibilità di selezionare altre velocità, poiché il pulsante è "rovesciato". Manca il pannello digitale che indica il numero di giri al minuto. Vi è inoltre una perdita di olio idraulico a livello della pompa, pertanto la macchina necessita sicuramente di manutenzione. Prezzo di vendita: 4.150 Euro + IVA, trattabili, FCA Oradea, Romania. Salvo errori, modifiche e vendita anticipata. Parliamo inglese. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana. Csdpfxsr Dd H Is Ac Nsrc

Stanje: novo, Leto izdelave: 2026, Completamente automática para el corte de perfiles de aluminio medianos y grandes con automatización de fácil uso. Coloque cualquier perfil de aluminio; la máquina lo detectará automáticamente y procederá a cortarlo según los trabajos asignados, utilizando un posicionamiento de material de alta precisión mediante servomotor. Entrada de listas de corte Excel vía WIFI para facilitar la carga de grandes listados de cortes. Para cada perfil de aluminio que coloque para cortar, independientemente de la longitud, un sensor láser mide su tamaño. Nuestro potente algoritmo de optimización calcula al instante el mejor orden de corte para minimizar el desperdicio. La máquina corta automáticamente la lista calculada sin detenerse. No requiere ninguna intervención del operador, simplemente continúe cargando nuevas barras de aluminio. Alternativa sencilla y de alta velocidad a las sierras de doble cabezal. Solo ingrese (o importe) las longitudes y ángulos necesarios y presione GO. La máquina produce de forma continua sus piezas anguladas, con precisión y a gran velocidad. • Operación de corte totalmente automática con alimentación de barras y corte a medida. Csdpfjf Eknnsx Ac Nsrc • Interfaz de usuario sencilla para operación automática: ingrese el trabajo y corte en segundos. • Corte simplificado de piezas, lotes o grandes listados de trabajos en Excel. • Corte y conteo de paquetes de barras/multibarra. • Entrada remota vía WIFI de listas de trabajos Excel con amplias capacidades de mapeo de datos. • Velocidades de corte de sierra y avance de barra ajustables para máxima productividad. • Modo de optimización automática con medición láser de longitud de barra y optimización para mínimo desperdicio (opcional). • Impresión automática de etiquetas para piezas utilizando datos de la lista de trabajos (aplicación manual de etiquetas, opcional). • Impresión en línea directa sobre el material sin acción del operador (opcional). • Impresión o escaneo de códigos de barras o QR para ingreso de trabajos (opcional). • Posicionamiento automático por servomotor del ángulo de inglete de la sierra hasta ±75° (opcional). Alta idoneidad para: • Fabricación de ventanas y puertas • Fabricación de estructuras de aluminio ingleteadas • Fabricación de estructuras de aluminio fabricado • Fabricación de composites • Fabricación de persianas, estores y mobiliario • Comercio minorista de aluminio Modelo: A550 Longitud: 9 m Unidad lineal: ProfiStop Alpha Longitud de material: 8580 mm Capacidad de empuje: 20 - 40 kg Software: Optimizador MAQUINARIA DE CALIDAD FABRICADA EN AUSTRALIA.

Stanje: novo, moč: 368 kW (500,34 KM), konfiguracija osi: 6x2, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (contactable at Tel. ...). Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Axle configuration: 6x2P, 3 axles, trailing axle, cab version AS MY, emission standard Europe, engine: Cursor 13, 500 HP, Euro VIe, transmission: 12-speed HiTroniX automated, permissible gross weight: 26 tons, drive axle variant SR single reduction, single axle, full air suspension, disc brakes, steered trailing axle, single tires, vehicle type: container chassis CM, vehicle set-up ON, wheelbase 4,800 mm, model year 2024, engine speed 1,650 RPM, emission standard EURO VI E, tire size 315/70R22.5, speed limiter 90 km/h, electrically operated lifting roof, transparent for high roof (MLL), standard black front grille, manually operated cab tilting mechanism, mirror cam covers for AS, FHS in body color, front underrun protection for chassis with total weight over 7,490 kg, plastic bumper, high roof AS cab, electronic immobilizer and 2nd vehicle key, dashboard design: plastic with black trims, COC EU vehicle type approval, digital tachograph version 4.1, air compressor 2-cyl. 630 cc with integrated clutch, demand-controlled, smart generator 2,880 W (24V x 120A), demand-controlled, SR-SOLO LIGHT 17x, rear shock absorbers, weight variants: front axle 8,000 kg, rear axle 11,500 kg (up to 12,000 kg technically possible), trailing axle 7,500 kg (up to 8,000 kg technically possible), standard train brake, front axle stabilizer, standard applications, front axle stabilizer, exhaust end pipe to the left, air filter unit under cab, lift mechanism for trailing axle or leading axle (TX/P), driving height with two settings, omission of rear underrun protection, trailer version for operation with continuous brake system, end crossmember, D-value: 130 kN, trailer socket for 24V operation, 15-pin, rear axle ratio: i = 2.31, connectivity box 4G incl. TCO service contract, engine idle shutdown, tire pressure monitoring system (TPMS) with internal sensors, VDI interface for telematics services version 4.0, infotainment: 10" TFT display, transmission software with ECO-Roll (coasting function), GPS cruise control Hi-Cruise, driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle according to ECE-27 specification, hill-start assist (Hill Holder) for comfortable starting on slopes, electronic stability program (ESP), reversing monitoring system with camera, blind spot monitoring system (BSIS) right side, intelligent speed assistant (ISA), forward detection system (MOIS), emergency braking assistant (AEBS), preparation for alcohol interlock device (ALC) with wiring, NOISE ECE 51/03, standard EU vehicle width, ECAS air suspension with 2 sensors, Speedline aluminum wheels, SLT, painting of plastic cab parts in cab color, luggage compartment left and right, transparent sun visor mounted on the outside of the cab roof, auxiliary diesel/water heater 4kW, fully automatic climate control including stationary air conditioning, standard refrigerator and storage box, leather steering wheel, curtains for bed, air horn mounted behind bumper (air operated), foldable table on passenger side, lower bed single-piece, firmness level: firm, upper bed with one-piece mattress, ashtray in center console, electrical provision for tail lift operation, ... Cedpfsyhyh Hox Ac Njrc

Stanje: zelo dobro (rabljeno), Forza Model 71510 – Boring FORZA MILLING HEAD WITH SPINDLE ONLY 85 mm The single spindle milling head is a key component in machining operations, specifically designed to serve as the core mechanism of a milling head. This unit stands out for its robustness and precision, as it is responsible for securely holding and rotating cutting tools such as milling cutters, drill bits, or reamers, and does not include the chuck or the tool holders. Its design enables quick and easy tool replacement and adjustment, making it essential for any milling process that demands high precision and efficiency. Manufactured from high-quality materials such as hardened steel, the spindle ensures tool stability during milling operations, minimizing vibrations and guaranteeing a high-quality finish on the machined workpieces. Weight: 26.4 kg Cedpfxeu Ndl Io Ac Nsrc FORZA DRIVE DOGS Ref. 714140 / 714150 Drive dogs for milling heads are essential components in machining operations that require superior precision and stability. These drive dogs are devices fixed to the milling head and are used to secure the workpiece or cutting tool during the milling process. They are manufactured from high-strength materials, such as hardened steel, and are designed to withstand the high cutting forces generated during milling. CLAMP Diameter: 265 mm Internal diameter edge to edge: 190 mm Distance between points: 108 mm Point diameter: 13 mm Edge diameter: 35 mm FORZA COLLETS FOR MILLING HEAD – 14mm / 10mm / 7mm

Stanje: rabljeno, Hidravlična enota, Hydroaggregat BOSCH REXROTH tip Solo FD 101 Hidravlični agregat Leto izdelave ca. 1980 Obratovalni tlak: maks. 115 bar Pretok: 12 litrov/min. Volumen rezervoarja: ca. 80 litrov Codpfoxf Uzdsx Ac Nerc (sredinski kontrolni steklenič) Moč motorja: 3 kW Napajanje: 400 V, 50 Hz - Hidravlična črpalka BOSCH REXROTH, tip Solo FD 101 - 1 kos 5/3 potni ventil, 24 V - 1 kos povratni filter - 1 kos regulator tlaka - Velikost rezervoarja D/Š/V: 650 x 400 x 470 mm - Priključni vijaki za hidravlične cevi 12L Potreben prostor D x Š x V: 700 x 430 x 1300 mm Lastna teža: 130 kg Dobro stanje

Stanje: dober (rabljeno), Objet Stratasys Model: Objet350 Connex 3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build volume: 342 × 342 × 200 mm Layer thickness: Cedpfxex A S Atj Ac Norc 0.016 / 0.030 mm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and weight: 1400 × 1260 × 1100 mm; 430 kg Cleaning station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Rubber-like: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-similar: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR printhead system PolyLog material management system Incl. digital colour options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection: 2024! Scope of delivery: (see image) (Specifications and technical data may be subject to changes and errors!) We are happy to answer further questions by phone.

Stanje: rabljeno, Leto izdelave: 2004, Overview This complete returnable glass bottle filling line was manufactured between 1993 and 2004 by several renowned European manufacturers, primarily Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-performance beverage production and processes up to 20,000 bottles per hour in various formats. It includes all components from depacker to packer. The line is in good condition for its age. The labeller was fully serviced in 2023. The system remains installed and connected, and an inspection can be arranged upon request. Technical Data - Capacity: up to 20,000 bottles/h - Bottle formats: 0.25 L Vichy, 0.5 L Set 1-3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles - Condition: Line in good condition - Availability: Immediately - Status: Still installed and connected Scope of Supply - Depacker | Otto Fleischer | 1993 - Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel - Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system - Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system - Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | Glass bottles, without capper - Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left-right operating direction - Swing top closer | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing top closure - Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection - Packer | Otto Fleischer | 1993 | ROTA 1 E, automatic grouping packer Credsyb R Uaepfx Ac Njc

Stanje: rabljeno, največja dovoljena obremenitev: 29.352 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2017, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, prostornina tovornega prostora: 102 m³, Oprema: ABS, VEHICLE NUMBER: 2814 ----Exterior equipment: * Galvanized chassis * Plain sliding tarpaulins without lettering / decals * Additional curtain tensioners at the front * Steel corner supports at front and rear * Sliding roof Schmitz Safety Roof (Edscha system) * Lift roof with stanchion lifter * Body height adjustable: front 7 x 50mm / rear 4 x 50mm Cedpfxjwibi Se Ac Nerc * Equipment for solo/unaccompanied ferry transport * Reinforced heavy-duty chassis front section * Bolt-on underrun protection, FERRY-Type with skid plate * Trailer information system Smart-Board with axle load display * Tensioning rope for tarpaulins * Steel bumper protection at rear * Document box ----* Technology: * Rotos axles with disc brakes * Air suspension with lift on first axle * Tyres: 435/50 19.5 * Tread depth in mm: 1st axle: 11/11; 2nd axle: 8/8; 3rd axle: 7/7 * Lashing holes in outer frame * Lashing rings: 7 pairs rated at 2 t each, 11 pairs rated at 5 t each * Pallet stop on both sides * Load securing certificate EN 12642 Code XL, Daimler 9.5, beverages * Reinforced cargo space floor * EX/II approval * Unladen weight: 6,648 kg * Fifth wheel height: 925 mm * TÜV inspection: 12/25 SP:* Leasing Example: €279 monthly instalment, 48 months term, 10% down payment (your used vehicle can serve as down payment) 10% final instalment. Delivery to your location possible. Trade-in/Leasing/Financing. We make it happen!

Stanje: rabljeno, consisting of: - Depalletizer, KETTNER, year 2000, 15,000 bottles/hr - Air rinser, Alwid, year 1999, 7,500 bottles/hr - Filler with capper, Fimer/Arol, year 2006, 8,000 bottles/hr - Labeller, Krones Variomatic, year 2001, 8,000 bottles/hr - Carton erector, KETTNER, year 2001, 20 cartons/min - Packer, KETTNER, year 2001, 7,000 bottles/hr Details: Cjdsxyt I Sspfx Ac Nerc - Siemens S7 control system - Various format sets available - Suitable for glass bottles from 0.35L to 1.0L with ROPP closures, 30mm and 31.5mm - Annual servicing by Krones technicians - In very good condition

Stanje: rabljeno, Leto izdelave: 2024, Hydraulic depth adjustment for front support wheels 2022 Herkulesz Plus+ / Double spring goosefoot share set HM, support wheels at the rear Solo/DSTS harrow / three-row central reinforcement, mounting accessories for STS/harrow, lighting / Crjdpfx Acsr Ncfko Njc

Stanje: rabljeno, Leto izdelave: 2024, Hydraulic depth adjustment front support wheels 2022 Herkulesz. Plus + / Double-spring tine set with goosefoot shares, rear support wheels Solo/STS harrow / three-row central reinforced mounting accessories STS/harrow lighting / Codpfxjtpa E He Ac Njrc

Stanje: rabljeno, prevoženi kilometri: 741.500 km, moč: 294 kW (399,73 KM), prva registracija: 09/2007, vrsta goriva: dizel, lastna masa: 8.455 kg, največja dovoljena obremenitev: 9.545 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/60R22.5, konfiguracija osi: 4x2, medosna razdalja: 5.500 mm, zavore: stalna plinska ročica, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 4, vzmetenje: zrak, število sedežev: 3, Oprema: ABS, greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, nizka raven hrupa, računalnik na krovu, servovolan, spojka prikolice, tempomat, zapora diferenciala, Lokacija vozila: v tranzitu, velika hiša, 1x zračni sedež, 1x ležišče, električna ogledala, ogrevana ogledala, električno okno levo, električno okno desno, klimatska naprava, tempomat, ABS (proti blokirnemu sistemu), regulacija zdrsa pogona (ASR), konstantni zaviralec, avtomatski menjalnik AS-Tronic, dviganje+spuščanje, meglenke, zračno vzmetenje, vlečna naprava z zrakom+lučjo, aluminijast rezervoar, nizka raven hrupa G1, zaščita dna, stranska aluminijasta zaščita, zelena okoljska nalepka. Medosna razdalja: 5500 mm. Nadgradnja: oprema za šolo vožnje (3-sedežna). Rezervno kolo možno na voljo za doplačilo! Vse informacije brez garancije, ker je vozilo v tranzitu! INFORMACIJE O OPREMI BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Crodpfx Acjx Npc Tj Noc

Stanje: dober (rabljeno), Incluido en el suministro: 01x bastidor apilable, usado Peso total: 27,23 kg Color del material: azul Ancho total: aprox. 600 mm Profundidad total: aprox. 800 mm Altura total: aprox. 950 mm Altura útil: aprox. 800 mm Dimensiones de apertura: aprox. 550 x 520 mm (An x Al) Tamaño de malla: aprox. 50 x 50 mm Grosor del alambre: aprox. 3,00 mm Perfil tubular: aprox. 22 mm ¡Compuesto por 2 laterales abatibles! 01x palet de un solo uso, usado Ancho total: aprox. 600 mm Profundidad total: aprox. 800 mm Altura: aprox. 150 mm Crodpfew Rvtajx Ac Noc Sus personas de contacto en nuestra empresa: Sr. Andre Evering Sr. Mario Klöver Sr. Falk Deutsch Información general sobre el artículo: Este artículo sólo se ofrece para recogida. El transporte o envío de este artículo supondrá costes adicionales, los cuales pueden solicitarse por separado dependiendo del lugar y el alcance de la entrega.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Zbiranje elementov (=3 postaje) za podaljšanje obstoječe popolne vezne linije ali samostojni stroj za zbiranje Csdevrca Sjpfx Ac Norc

Stanje: novo, Lifting capacity 0.5 t Crodpjh Un E Sefx Ac Nec Lift height 4000 mm Intended use as stationary chain hoist Painted in RAL 5017 traffic blue Load capacity 500 kg Hook travel 4000 mm Operating environment indoor operation Design standard FEM 9.901 Mechanism group 2m / M5 Operating voltage 3~50Hz 400V Control type direct control Protection class IP55 Lifting, 2-speed (pole-changing) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Switching cycles 360 c/h Standard equipment Crab electrics Single trolley/hoist, ready-to-operate pre-assembled, with main power connector. Floor operation via pendant control The pendant control with 2-stage push buttons is attached to the chain hoist. Manufacturer: ABUS Control cable length, including pendant: 3310 mm Control cable calculated according to hook travel Overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Stanje: novo, Load capacity 1.0 t Lifting height 4000 mm Use as stationary chain hoist Chain hoist type: GM 4 1000.5-2, 2-fall Paint finish in RAL 5017 traffic blue Rated capacity 1 t Hook travel 4000 mm Operating location: indoor operation (workshop) Calculation basis: FEM 9.901 Duty group: 2m / M5 Operating voltage: 3~50Hz 400V Control type: direct control Protection class: IP55 Hoisting, 2-speed (pole-changeable) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle: 60% ED Cjdsh Un Hajpfx Ac Nerc Switching frequency: 360 c/h Standard equipment: trolley electrics Single trolley/hoist, ready-for-operation pre-assembled, with mains plug. Operation from floor level via pendant control station Pendant control station with 2-speed buttons, fixed to the chain hoist. Make: ABUS Length of control cable, incl. pendant station: 3310 mm Control cable length calculated according to hook travel. Overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Stanje: novo, Lifting capacity 0.25 t Lift height 4000 mm For use as stationary chain hoist Painted in RAL 5017 traffic blue Load capacity 250 kg Hook travel 4000 mm Operating location: indoor (workshop use) Design standard: FEM 9.901 Duty classification: 2m / M5 Operating voltage: 3~50Hz 400V Control type: direct control Protection rating: IP55 Lifting, 2-speed (pole-changing): 2 / 8 m/min Lifting power: 0.09 / 0.35 kW Duty cycle: 60% ED Switching operations: 360 cycles/hour Standard equipment: trolley electrics Push travel trolley/hoist, factory pre-assembled and operational, with mains power plug. Operation from floor via pendant controller The pendant control with 2-stage pushbuttons is attached to the chain hoist. Brand: ABUS Length of control cable, including pendant controller: 3060 mm Control cable length calculated according to hook travel Overload protection Crodpfsh Un Hdex Ac Nec Mechanical slip clutch as overload protection. The slip clutch is factory pre-set.