Affeldt Zgornji Podajalnik Lijak nakup rabljenega (1.632)

Stanje: zelo dobro (rabljeno), Višina iztresa 3100 mm Višina polnjenja 1870 mm Širina traku 590 mm Razmik med prečkami 250 mm Credpfx Ajy D Dtcekrjc Višina prečk 35 mm Skupna višina 3950 mm Stroj pripravljen za delo Poglejte tudi moje druge oglase.

Stanje: zelo dobro (rabljeno), Stopnični podajalnik TV Torres & Valente Crjdpfx Aeyrdtqekrsc Širina: 400 mm Cena: 3.000 PLN na kos

Stanje: pripravljen za uporabo (rabljen), hidravlični dolžina elementov 300-3000 mm tekoče nastavljanje hitrosti teža 130 kg napajanje 380V leto izdelave 2003 Crodpfx Aoyyy Sgekrec

Leto izdelave: 2005, stanje: rabljeno, Nalagalnik za položenke (zložene pole) Kolbus SAL 411.A Letnik 2005 Konfiguracija: Csdpsyzduhefx Akrjrc • Kontrola manjkajočih in dvojnih pol Primeren za povezavo z lepilnim strojem Kolbus KM 473

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Crsdpfx Akoxw D Uderjc Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts Credpfx Aew Sld Rskrsc * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel Crsdexbzptspfx Akrsc * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Crsdew Slxzopfx Akrsc Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Crodow Smb Rjpfx Akroc Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Crjdpfsw Slcgsx Akrsc Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Credpfsxw Ebljx Akrec Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg Crjdpfx Akow Slf Ujroc

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Cedpfoxd S T Usx Akrerc Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic sheet ejection system Crsdpfx Aksxw Ecvsrsc * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Crodpfx Asw Slbvekrjc Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 40 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly by means of pistons hydraulically attached to the frame. * Protected against overload. * The upper roll and side rolls are driven by a hydromotor and planetary gearbox (all three rolls are motor-driven). Credexw Ebxspfx Akrec * The positions of the rolls are easily readable via three digital displays. * Easy removal of the rolled part thanks to the hydraulically opening head and the automatically lifting shaft. * Very easy operation with a movable control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Cone bending system. * Central lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT * NC and CNC control for automation. * Top crane (elevator) for supporting large diameter bending. * Hydraulic side supports for supporting large diameter bending. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Leto izdelave: 2022, stanje: novo, -1- unused top cover for impact mill SBM 12/12/4 RHS Csdeu Spmpspfx Akrorc

Stanje: dober (rabljeno), In this offer, you are purchasing a used long sheet feeder "Canon BDT VX 370". Item for Sale: Crsdol Axtgepfx Akrsc 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 series Ricoh Pro C9100 series Condition: This offer is for a used device that may show signs of wear (such as minor scratches or yellowing). The device has been tested for functionality. Packaging and Shipping: You are welcome to inspect the unit during our business hours. Please arrange an appointment in advance! Sea-worthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. If you require further information, please do not hesitate to contact us personally.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), diameter: 1700 mm Stainless steel Cedpefd E R Asfx Akrorc

Stanje: dober (rabljeno), Vibratory bowl for screwdriving technology Cedpfx Akog Anduororc Bowl diameter: 320 mm

Stanje: dober (rabljeno), Pan diameter 600 mm Codpfxjh Rfffo Akrerc Vibration: adjustable

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, Na prodajo je sistem za samodejno nalaganje in razkladanje pločevin Mazak EMC 3015, Extensible Manufacturing Cell. Cena novega je približno 130 tisoč EUR. Sistem je praktično kot nov. Uporabljal se je skupaj s strojem z delovanjem 2000 ur in še to občasno. Letnik proizvodnje 2016. Visok model (High Column type), združljiv z naslednjimi Mazak stroji: Optiplex, Optiplex Nexus, SpaceGear, Optiplex NEO. Največja dimenzija pločevine: 3000x1500 mm Največja teža pločevine: 900 kg Razkladalna postaja: max 2000 kg Sistem upravljanja čakalne vrste za nalaganje pločevin. Crodpfjyh N Rdox Akrec Collimator Group nudi celovite storitve za laserske stroje Mazak – od servisa do prodaje. Če vas zanima drug model ali imate drugačen proračun, kontaktirajte nas.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, Preț disponibil pentru configurația de mai jos: Top Freezer AHT Kinley sau Epta 250, combinat cu vitrină orizontală AHT Miami (ne-recondiționată, dar testată și completă cu grilaj interior – rafturi și separatoare), garniturile capacului de sticlă schimbate. Fun Ice SRL este reprezentant AHT în România de peste 25 de ani Revânzător autorizat de echipamente noi și second-hand AHT Livrare rapidă, la nivel global Crjdpfx Aerhwuwokrec AHT Kinley 210/250 cm (poate fi folosit ca vitrină frigorifică sau congelator, temperatură medie și joasă) !!! Sistem la cheie, complet testat (bază + 2 rânduri de rafturi) Agent frigorific ECO R290 Pregătit pentru conectare, instalare facilă Iluminare LED internă (canopy LED și iluminare uși cu LED) Unități disponibile aleatoriu pe stoc – Top freezere AHT Kinley / Epta sau Carrier, 210 cm și 250 cm lungime Se pot combina cu vitrine AHT Miami sau Athen XL LED (pe stoc în Oradea, România) Toate echipamentele recondiționate din seria AHT EQ beneficiază de garanție 6 (șase) luni pentru piese, cu excepția materialelor consumabile și de uzură (agent frigorific, garnituri, lămpi neon etc.) Accesorii și piese de schimb disponibile pe stoc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, širina tuljave: 200 mm, največja širina izdelka: 200 mm, skupna masa: 80 kg, trajanje garancije: 12 meseci, delovna širina: 200 mm, višina izdelka (maks.): 3 mm, širina valja: 64 mm, Silicon+ SFS 200 Servo Feed Roll Unit Compatible with all types of presses and primarily used on Bruderer, Schaal, and Mabu machines. Feed length – min. 0.10 mm up to max. 9999.99 mm Feed width – max. 100 mm, 200 mm, or 300 mm depending on the required model. Material thickness – 0.20 – 3.20 mm Feed angle – 180° Press line height – ±50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC touchscreen Brushless servo motor – 0.75 kW, 1.8 kW, or 2.3 kW Feed unit weight approx. 80–150 kg Feed unit dimensions: 780 x 730 x 680 mm – The unit is powered by a brushless direct-drive servo motor, eliminating gear play and wear, with no noise, no lubrication required, and a safe, synchronized roller segment pair. Cjdpfx Akevptz Iererc – Rollers can be supplied with PU coating on request for gentle handling of delicate raw material. – Synchronization between the feeder and the stamping press is straightforward via a cam signal from the press’s PLC. – The unit can be programmed for up to 10 groups of feeding steps, saved as recipes. Feed length is steplessly adjustable during operation. EUR 1 certificate for European origin and CE compliance. Specifications are subject to change without prior notice. Upon consultation, we can manufacture feeders tailored to your requirements.

Stanje: dober (rabljeno),