Weishaupt Gasbrenner G11/1D-4750Kw Plinski Gorilnik nakup rabljenega (1.267)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, A Bosch steam boiler with a Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51 l, max. allowable pressure: 31 bar, test pressure: 51 bar, max. temperature: 238°C, thermal output: 87 kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3,315 l, max. allowable pressure: 13 bar, test pressure: 24.7 bar, max. temperature: 195°C, steam output: 2,000 kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275 kW / 2,000 kW, fuel oil pressure: 30 bar. Including Siemens Simatic HMI control system, water treatment, economizer, and fittings. Documentation available. Pedpfst Nhmnox Ah Ujgl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Na voljo sta dva plinska gorilnika Weishaupt skupaj z dvema kotloma WMG. Moč: 2x3,3 MW. Dokumentacija je na voljo. Ogled na lokaciji je možen. Podpfx Ahext Rlne Uegl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Na voljo je star parni kotel Loos, vključno z razmeroma novim gorilcem Weishaupt. 1) Parni kotel Loos UL-S, letnik: 1991, parna zmogljivost: 6000 kg/h, največji obratovalni nadtlak: 13 bar, volumen kotla: 6380 l. 2) Gorilec Weishaupt G50/2-A, letnik: 2013, obseg moči: 600 kW-5400 kW, obseg priključnega tlaka: 15 mbar-500 mbar. Dokumentacija na voljo. Ogled na lokaciji je možen. Pgjdpfx Asx Uq T Rsh Uel

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Three burners are available. 1) Elco. 2) Seibold WV 500, year of manufacture: 2022, fuel: light fuel oil EL, calorific value: approx. 10 kWh/l, fuel throughput: approx. 160 l/h, rated thermal output: 1,600 kW, pilot burner fuel: propane, propane calorific value: approx. 26 kWh/nm³, propane inlet pressure: 100 mbar, max. chamber temperature: 270°C, max. chamber pressure: 3 mbar. 3) Weishaupt, year of manufacture: 1999, output range: 474 kW–2,491 kW. An on-site inspection is possible. Pgsdpfjwl I A Djx Ah Uol

Stanje: novo, Dvižna zmogljivost 2000 kg Teža 80 kg Dimenzije D x Š x V 0,5 x 0,25 x 0,3 m Pjdpfx Ahevblf Ne Usgl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Girbau plinski sušilnik, 100 kg Podpfey Ugr Nex Ah Uegl

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Adelco Jetforce Dryer 150 - sušilnik na zemeljski plin - širina traku: 150 cm - dolžina peči: 300 cm Pgsdpsx Nwinefx Ah Uel - hladilni most za pečjo - vhodni trak: 200 cm - izhodni trak: 150 cm Sušilnik je zelo učinkovit in zanesljiv. Preko njega vodimo izhod iz dveh samodejnih MHM tiskarskih strojev. Možen dnevni ogled in preizkus v naši proizvodnji.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 9.000 mm, skupna širina: 4.000 mm, skupna višina: 3.750 mm, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec-robot za zatesnjevanje VFL-1D/25, letnik 2005, smer delovanja levo/desno, sestavljen iz naslednjih komponent: - APKV-4/25, kombinacija vhodnega zatesnjevanja z merilno napravo za steklo in okvir ter avtomatskim 4-steznim aplikatorjem plute, letnik 2005 - VFL-1D/25, avtomatsko zatesnjevanje, vključno z možnostmi za trojno zasteklitev (2 cikla zatesnjevanja), z Beckhoff-PC IPC2004, Beckhoff zaslonom na dotik in Lenze servo pogoni. - DOS-1PUD + SID, doziranje materiala za PU (osnovni rezervoar 200 litrov, utrjevalec 20 litrov) in SI (osnovni rezervoar 200 litrov, utrjevalec 20 litrov), letnik 2005 Stroj se prodaja, kot je opisano zgoraj, EXW naše skladišče strojev Hofkirchen/Avstrija. Dodatna garancija ali jamstvo ni zagotovljeno. Pgodpfoy Ub Swsx Ah Uol Na voljo konec maja 2026.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), vrsta goriva: plin, Vehicle description LPG Forklift LINDE H18 Pgedpelbgurjfx Ah Usl Year: 2007 According to hour meter: 11,709 hours 28 kW VW engine 1.8-ton lifting capacity 2.12 m overall height 4.62 m lifting height - Triplex full free lift mast - Integrated side shifter - Work lights - Good tires Sales price: €8,950 net Affordable delivery available!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Prodaja se delujoči in zelo dobro ohranjen dvogorivni gorilnik (olje/plin) znamke ELCO KLÖCKNER, vključno s plinsko linijo Dungs DN 65. 1. Tip gorilnika: EK 6.200 GL Moč: 279 - 1710 kW Pgjdpfsy Uuw Hex Ah Uel Kurilno olje: 50-163 kg/h Leto izdelave: 2010 Priključni tlak: 300 mbar

Stanje: rabljeno, Leto izdelave: 1979, Load capacity: 1.6 t Operating hours: 7,198 h Equipped with sideshift Pjdeu Nv Nfspfx Ah Uogl Forklift weight approx. 2.8 t (Gas cylinder not included in scope of delivery, property of WMW AG)

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Workpiece thickness - max.: 80 mm Workpiece thickness min.: 5 mm Plate size without repositioning: 2000x1000 mm Plate size min.: 100x100 mm Longitudinal travel: 2800 mm Cross travel: 1000 mm Control: CNC Mubea Matic100 Hole diameter min/max: 10/40 mm Tool holder: Taper/cone/cono DIN 6327 Drilling spindle stroke max.: 150 mm Positioning accuracy: +/- 0.5 mm Spindle speeds: 112-180-224-280-355-560 rpm Traverse speed: 80 m/min Feed length max.: 150 mm Rapid traverse: 8 m/min Work table: L:2500; W:950 mm Workpiece weight: 750 kg Deburring unit max.: d=40 mm Working height: 1050 mm Pedpfx Aou Id Rueh Uogl Gripper device: 4 pcs Gripper opening min/max: Type I: 5/45 mm Gripper opening min/max: Type II: 45/85 mm Compressed air connection: 6 bar Total power requirement: 30 kW Machine weight approx.: 5.5 t Space requirement approx. LxWxH: 5.0 x 5.5 x 2.7 (depending on installation) m 2-axis CNC-controlled plate drilling system for automatic processing of sheet metal and flat materials comprises: machine body, Y-axis travel unit, X-axis travel unit, positioning unit, deburring unit, drilling unit, material support tables, hydraulic unit, and control Further technical data: - Can process plate sizes up to 1000x4000 mm by repositioning! - Material support tables with support elements, guide rail for guiding and transporting the positioning carriage (approx. L:2500xW:950mm, loading capacity approx. 750kg) - Drill cooling by compressed air - Control for 2-axis positioning X-axis 80m/min and Y-axis 30m/min - Control has storage capacity for approx. 10,000 programs Equipment: - 1 positioning carriage, 2 material support tables, full-width conveyor - Control cabinet, operator panel, rack, deburring device - CNC screen control Accessories: Roller conveyor 1800x1000mm and roller conveyors 2x1000mm The machine is ready for transport and available for sale from Leipzig.

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, TOP plinski gorilnik Heidebrenner, 1-plamenski Pgedpjgx T A Nsfx Ah Uel Izvedba iz nerjavečega jekla S podvozjem Za plin v jeklenkah Nazivna toplotna obremenitev: 3,8 kW Mere: 410 x 410 x 700 mm (ŠxGxV) Rabljena naprava, očiščena in SAB preverjena Obiščite našo veliko skladišče pekovskih strojev!

Stanje: rabljeno, Leto izdelave: 2021, nosilnost: 3.000 kg, dvižna višina: 4.330 mm, skupna dolžina: 4.040 mm, - Drive: LPG (liquefied petroleum gas) - Operation: Seated - Load capacity kg: 3000 - Load center mm: 500 - Load distance mm: 485 Pgodpfx Ahsy S Epuj Uel - Axle load with load, front/rear kg: 6230/980 - Axle load without load, front/rear kg: 1490/2720 - Track width front mm: 1010 - Track width rear mm: 965 - Mast tilt forward/backward degrees: 6/11 - Seat height mm: 1110 - Coupling height mm: 335 - Aisle width for pallet 1000 x 1200 crosswise mm: 4115 - Aisle width for pallet 800 x 1200 lengthwise mm: 4315 - Turning radius mm: 2430 - Minimum pivot point distance mm: 720 - Travel speed with/without load km/h: 18.5/19.0 - Lifting speed with/without load m/s: 0.51/0.55 - Lowering speed with/without load m/s: 0.50/0.50 - Gradeability with/without load %: 23 - Max. gradeability with/without load %: 26/20 - Service brake: Hydraulic - Engine power according to ISO 1585 kW: 44 - Rated speed rpm: 2570 - Number of cylinders / displacement cm³: 4/2237 - Operating pressure for attachments bar: 147 - Oil flow for attachments l/min: 65-74 - Sound pressure level according to EN 12053, operator's ear dB(A): 77

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, SPAKO 1000L | Gas Cooking Kettle / Process Kettle Manufacturer: SPAKO Food Machinery Pgjdpoy Um Ahsfx Ah Usl Model/Type: Stationary rectangular cooking kettle Working capacity: 1000 liters Power supply/Heating: Gas Construction material: Stainless and acid-resistant steel Dimensions: 2100 x 1700 x 1250 mm The professional cooking kettle from the Dutch brand Spako, with a capacity of 1000 liters, is one of the most economical and efficient heating solutions dedicated to the mass food production sector. This unit is a key component in meat processing plants, butcheries, slaughterhouses, offal processing facilities, as well as in large central kitchens, delicatessen factories, and vegetable processing plants. Designed for scalding sausages, cooking offal, rendering fats, preparing broths, soups, sauces, and tripe in batch systems. Gas heating in Spako kettles provides powerful thermal output, allowing for rapid heating of the 1000-liter batch to boiling temperature, which drastically shortens the production cycle compared to traditional electric kettles. The thick-walled base and specialized flame distribution system ensure optimal heat distribution without local overheating points, minimizing the risk of product sticking. Thermal insulation of the entire body and lid reduces energy losses to the surroundings, improving workplace comfort and lowering gas consumption.

Stanje: rabljeno, Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding machine with inverter welding power source Serial No. Year of manufacture: 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Adjustment range stepless Power supply 400 Volt, 50 Hz, 32 Amp plug Pgjdpfx Ahewa Uwde Uol - Separate 4-roller wire feeder with connecting hose package - Digital display for voltage and current - Pulse welding function with single and double pulse - 2-stroke and 4-stroke welding modes - 4 meter Binzel hose package with central connection - Water-cooled - Shielding gas pressure regulator - MIG/MAG pulsed arc welding - MSG double pulse welding - MIG/MAG welding Required space (L x W x H): 1150 x 510 x 1350 mm Weight: 200 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 1988, obratovalne ure: 16.246 h, nosilnost: 1.500 kg, dvižna višina: 3.700 mm, vrsta goriva: plin, tip droga: dupleks, lastna masa: 2.760 kg, prevoženi kilometri: 16.246 km, Duplex viličar na LPG Znamka: Toyota Letnik: 1988 Dobro vozi in dviguje, brez puščanj Nosilnost: 1.500 kg Dvižna višina: 3.700 mm Prehodna višina: xxx Opremljen s pomikom vilic (SIDESHIFT) Oglejte si video na YouTube Pgjdpfx Ahey Exnks Usl

Stanje: dober (rabljeno), Leto izdelave: 2017, nosilnost: 3.000 kg, vrsta goriva: plin, tip droga: triplex, ravno prispelo Pgedpfx Ahsy Eihno Ujl več informacij sledi

Stanje: dober (rabljeno), Varilni aparat za zaščitni plin, obločno varilna naprava, MIG/MAG varilna naprava, impulzna varilna naprava - Proizvajalec: Esab, varilni aparat za zaščitni plin PULS - Tip: AristoMig 500W - Največja varilna moč: 500 A Pgedoy Ulziepfx Ah Uol - Oprema: vodno hlajenje - Ohišje podajalnika žice: 4-kolesni pogon Esab tip AristoFeed 48-4 - Količina: 3x Esab, varilni aparat za zaščitni plin PULS na zalogi - Cena: na kos - Dimenzije: 1200/700/H1730 mm - Teža: 210 kg

Stanje: dober (rabljeno), Stroj za varjenje v zaščitnem plinu, obločni varilni aparat, MIG/MAG varilna enota, pulzni varilni aparat -Proizvajalec: EWM, stroj za varjenje v zaščitnem plinu PULS -Tip: LUD320W -Maks. moč varjenja: 500 A -Oprema: vodno hlajenje -Ohišje za podajanje žice: HIGH-SPEED integral 4X4S, 4-valjni pogon Pgsdoy Ulu Nepfx Ah Uel -Dimenzije: 1370/820/H1500 mm -Teža: 242 kg

Stanje: dober (rabljeno), Zaščitnogasni varilni stroj, obločnovarilna naprava, MIG/MAG varilna naprava, pulzna varilna naprava -Proizvajalec: Esab, zaščitnogasni varilni stroj PULS -Tip: LUD320W Pedpfxey Ulrno Ah Uogl -Maksimalna varilna moč: 320 A -Oprema: vodno hlajenje, daljinski upravljalnik -Potisni kovček za žico: Esab MEK 44 C s 4-kolesnim pogonom -Mere: 1130/640/H1630 mm -Teža: 174 kg

Stanje: dober (rabljeno), Shielded Gas Welding Machine, Arc Welding System, MIG/MAG Welding Unit - Manufacturer: ESS, Shielded Gas Welding Machine MIG-MAG Type 310 MW - Max. Welding Power: 310 A - Water-cooled - Wire Feed: ESS PS 12-8 - Accessories: incl. torch hose package, ground cable - Dimensions: 1020/480/H910 mm Pgodpfx Ajqwprvjh Uel - Weight: 208 kg

Stanje: dober (rabljeno), Shielded Gas Welding Machine, Shielding Gas Device - Maximum welding output: 320 A - 2-roller drive - Air-cooled Pedpfx Asb A Hhvoh Uogl - Includes ground cable - With detachable wire feeder - Gas regulator - Hose package - Dimensions: 1000 x 500 x H970 mm - Weight: 170 kg

Stanje: dober (rabljeno), Shielded gas welding machine with pulse function, pulse-arc welding unit, MIG/MAG-pulse welding system -includes: 3 torch packages (1x aluminium, 1x stainless steel, 1x steel) -maximum welding output: 330 A -features: remote control connection, detachable wire feeder, incl. earth cable, gas regulator Podpfxod I U Dwj Ah Uegl -wire feeder: 4-roller drive -cooling: water-cooled -dimensions: 655/900/H1490 mm -weight: 160 kg