Stiskalnica Z Drsno Mizo nakup rabljenega (55.308)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 500 mm, obratovalna hitrost: 200 mm/s, hitrost vzvratne vožnje: 200 mm/s, širina mize: 750 mm, dolžina mize: 560 mm, širina plošče bata: 530 mm, dolžina plošče bata: 400 mm, skupna dolžina: 1.900 mm, skupna širina: 1.200 mm, skupna višina: 3.200 mm, skupna masa: 5.040 kg, Oprema: dokumentacija / priročnik, Hidravlična stiskalnica PYE 100 S1M z izmetalcem.\nProizvajalec: Werkzeugmachinen GmbH Zeulenroda (Nemčija), leto 1990.\nParametri:\nMaksimalna stiskalna sila: 100 ton.\nDelovni tlak: 16 MPa.\nMaksimalna izmetalna sila: 40 ton.\nHod batnice izmetalca: 200 mm.\nZgornja miza: 530x400 mm.\nSpodnja miza: 750x560 mm.\nSvetla odprtina: 800 mm.\nHod cilindra: 500 mm.\nHitrost navzdol: 200 mm/s.\nHitrost navzgor: 200 mm/s.\nPotreba po moči: 17 kW.\nTeža: 5040 kg.\nVišina: 3200 mm, Dolžina: 1900 mm, Širina: 1200 mm. Pjdpfjygtzyjx Altogp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, hod: 500 mm, obratovalna hitrost: 100 mm/s, hitrost vzvratne vožnje: 450 mm/s, širina mize: 630 mm, dolžina mize: 500 mm, širina plošče bata: 450 mm, dolžina plošče bata: 380 mm, kapaciteta rezervoarja za olje: 300 l, skupna dolžina: 1.150 mm, skupna širina: 1.750 mm, skupna višina: 3.050 mm, skupna masa: 3.200 kg, razdalja med stojali: 800 mm, Oprema: dokumentacija / priročnik, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture: 1986. Manufacturer: VEB Wema Zeulenroda (Germany). Machine after complete overhaul. Piston seal replaced. Specifications: - Maximum pressing force: 40 tons - Operating pressure: 16 MPa - Upper table: 380 x 450 mm - Lower table: 500 x 630 mm - Daylight opening: 800 mm - Cylinder stroke: 500 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Ejector stroke: 200 mm - Ejector force: 16 tons - Power requirement: 13 kW - Weight: 3180 kg - Height: 3050 mm, Length: 1750 mm, Width: 1150 mm Pedpfx Aewbt Uqjltjgp Technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and functional testing of the machine are possible by appointment.

Stanje: zelo dobro (rabljeno), 36" magnetna miza# Model št. 18 Pedpfx Alozh Ngmetsgp

Stanje: dober (rabljeno), številka stroja/vozila: RTT HAU T3, Used rotary index table polishing machine Manufacturer: Hau Podeh Ug Ulepfx Altsgp Rotary indexing table with 6 work spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, control cabinet

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 0550296, Ponudba 26149 Tehnični podatki: - Tlačna sila 125 t - Razpon 340 mm - Velikost mize približno 1000 x 680 mm - Prehodna odprtina v mizi cca. 300 x 200 mm - Največja vgradna višina cca. 500 mm - Površina bata približno 600 x 300 mm - Luknja za klin v batu 50 mm - Nastavljivost bata 75 mm - Nastavitev hoda 20 - 180 mm - Število hodov 80 1/min - Svetlobna pregrada - Hidravlična sklopka - Pnevmatski dušilec - Dvoročno upravljanje - Centralno mazanje - Ločena elektro omara z upravljalnimi elementi - Priklop na pnevmatiko 6 bar - Pogon 400 V / 16,5 kW - Potrebni prostor cca. Š 1700 x V 2900 x G 2700 mm Pgsdpfx Aljy Tvdxetjp - Teža cca. 9400 kg

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Pressing force 800 kN, stroke adjustment 30 - 240 mm, ram adjustment 80 mm, strokes 30 - 90 / min, table 1,200 x 800 mm, through-hole 350 x 370 mm, ram size 900 x 450 mm, throat depth 410 mm, max. table-to-ram 695 mm, ejector, ejector stroke 70 mm, ram weight compensation, oil-air cooling system, safety control III. Pgodeiuxwqjpfx Altop Height 3,600 mm Width 1,660 mm Depth 2,400 mm Weight 12,100 kg

Stanje: novo, Rated output: up to 7,000 kg/h Electrical connection: 3 kW 400V 50Hz (3-phase) Electrical fuse protection: 16 A slow-blow Dimensions: Length: 4,435 mm Width: 2,250 mm Height: 2,160 mm Discharge/infeed height: 1,430 mm Belt width: 1,100 mm Application width: 320 - 870 mm Application height (stepless adjustable): 10 - 50 mm Weight: 3,400 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Belt speed: 1.2 - 4.5 m/min Contact time: 1.5 - 6 min Water consumption for cleaning: 20 l/min (continuous operation, cleaning mode) Connections: Pgedpfx Alsdix N Hstsp Wastewater connection: Ø 75 mm Juice outlet connection: DN 40 Height of juice outlet: 200 mm Height of wastewater outlet: 100 mm Height of pomace discharge: 800 mm Suitable for pome and stone fruit Scope of delivery: High-pressure cleaner, compressor Includes powered brush rollers (top and bottom)

Stanje: novo, Rated output: up to 3,000 kg/h Electrical connection: 3.5 kW, 400 V, 50 Hz (3-phase) Electrical protection: 16 A slow-blow Dimensions: Length: 3,720 mm Width: 1,730 mm Height: 2,110 mm Discharge or feeding height: 1,430 mm Belt width: 660 mm Feeding width: 220 – 440 mm Product height (continuously adjustable): 10 – 40 mm Weight: 2,200 kg Material: 1.4301 / AISI 304 stainless steel Juice yield: up to 80% (depending on fruit variety) Pgjdpodix I Uofx Altsp Belt speed: 1.2 – 4.5 m/min Contact time: 1.4 – 4.2 min Water consumption for cleaning: 10 l/min (continuous operation with cleaner) Connections: Wastewater connection: Ø 75 mm Juice outlet connection: DN 25 Juice outlet height: 130 mm Wastewater outlet height: 50 mm Pomace discharge height: 810 mm Suitable for pome and stone fruits Scope of delivery: high-pressure cleaner, compressor Includes driven brush rollers (top and bottom)

Stanje: dober (rabljeno), stiskalna sila: 100 t, skupna širina: 3.000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operateur Year of manufacture: 2007 Long-stroke CNC press brake 8-axis controlled ASTRO 50Y AMADA Robot The ASTRO 50 Y bending cell is comprised of an HFE press brake combined with a 7-axis robot. Ideal for processing medium/thin gauge and large-dimension components. This machine is highly versatile thanks to a 4-meter linear axis and multiple grippers. Programming is exceptionally user-friendly via EASY CAM software. CE-compliant safety fencing surrounds the machine and robot. Specifications (Metric / US Standard) Pgjdovwcduopfx Altsp There are currently no specifications available for this machine. Approximate Dimensions: Length: 8000 mm Width: 4000 mm Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. Details are given in good faith; accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend that you verify all critical details.

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 4788, Skupna pritiskalna sila: 35 t Izvlaka: 225 mm Hod bata: 8 - 80 mm Nastavitev bata: 50 mm Montažna višina (hod spodaj, nastavitev zgoraj): 325 mm Pritrdilna površina mize pribl.: 600 x 450 mm Pritrdilna površina bata pribl.: 300 x 225 mm Število hodov na minuto: 160 min-1 Potreba po moči: 2,2 kW Pgedpfew Tukisx Altop Dimenzije DxŠxV: 1000 x 1600 x 2200 mm Teža stroja pribl.: 1,9 t

Stanje: rabljeno, Pressing force: 50 t Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Pedpfx Ajwyplcjltegp Table height above floor: 850 mm Rapid approach speed: 32 mm/s Working speed: 6.3 mm/s Rapid return speed: 42 mm/s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control system, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation: Optionally available with HORST robot.

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t Throat depth: 350 mm Pedpouqdwxjfx Altsgp Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke down, adjustment up): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min⁻¹ Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment: Machine includes: - Guard HS Decoiler M 15 / 500 - Year of manufacture 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outside diameter: 1400 mm Coil inside diameter: 380 - 530 mm HS Straightening Machine RME 40 - 9 - Year of manufacture 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m/min Feed length: 0 - 9999.99 mm Additional equipment: The machine was retrofitted with SIEMENS S7 control in 2009.

Stanje: rabljeno, Leto izdelave: 1971, številka stroja/vozila: 7130, Total pressing force: 60 t Throat depth: 275 mm Podsuqcxnjpfx Altogp Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Table clamping surface approx.: 740 x 470 mm Strokes per minute: 14 - 100 min⁻¹ Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Stanje: rabljeno, Leto izdelave: 1970, Press force: 30 t Throat depth: 160 mm Adjustable ram stroke: 20 - 45 mm Pjdpouqc Enefx Altegp Ram adjustment: 10 / 60 mm Shut height (stroke bottom, adjustment top): 220 mm Table clamping area approx.: 470 x 300 mm Ram clamping area approx.: 250 x 190 mm Strokes per minute: 80 - 240 min⁻¹ Power requirement: 4 kW Dimensions LxWxH: 1,400 x 1,800 x 2,000 mm Machine weight approx.: 2.67 t Standard equipment: The machine's electrical system was modernized in 2015.

Stanje: rabljeno, Leto izdelave: 1983, številka stroja/vozila: 5154, Total pressing force: 25 t Throat depth: 250 mm Ram stroke: 6 - 60 mm Ram adjustment: 50 mm Pgsdpeuqc Hfsfx Altsp Installation height (stroke down, adjustment up): 190 mm Clamping plate thickness: 50 mm Table clamping surface approx.: 500 x 400 mm Ram clamping surface approx.: 350 x 250 mm Ram bore (clamping pin hole): 40 H7 mm Strokes per minute: 160 min⁻¹ Dimensions (LxWxH): 1,300 x 1,500 x 1,995 mm Machine weight approx.: 2 t Additional features Tiltable press frame

Stanje: rabljeno, Dvižna miza, enostebrična dvižna miza, dvižna miza za orodje, dvižni voziček GRUSE tip WZW Stojalo za material Tovarna št.: 750025 Leto izdelave: 1990 Nosilnost: 500 kg Pgjdpfx Aljy Dvghjtop Velikost mize: 600 x 600 mm Hod: 290 mm Dvig na en pedalni pritisk: ca. 10 mm Višina mize spodaj: 660 mm Višina mize zgoraj: 950 mm - Dvig preko hidravličnega bata s stabilnim cevnim vodilom - 4 kos plastičnih fiksnih koles, ca Ø 200 mm, 2 kos vrtljiva z zavoro Lastna teža: 75 kg Dobro stanje

Stanje: rabljeno, Leto izdelave: 2008, 3650 x 1560 mm matrična miza 4455 mm hod osi X [za rezkanje] 1930 mm hod osi Y [za rezkanje] 250 mm hod osi Z 150 mm maksimalna višina obdelovanca Vektorske hitrosti osi X / Y: 43 m/min Hitrost osi Z: 15 m/min Moč: 2000 W, obdelovalna enota 9 / 10 KM za nosilce orodij HSK63F. Hitrosti od 12.000 do 18.000 vrt/min Vakumska črpalka 250 m³/h Telesolve sistem za daljinsko diagnostiko Opremljena z naslednjimi opcijami: Interpolacijska os Z Centraliziran sistem za odsesavanje prahu Predpriprava za kotne glave TR10 fiksni 10-pozicijski menjalec orodij [nameščen ob strani mize] R8 hitri 8-pozicijski rotacijski menjalec orodij [nameščen na podporni prečki obdelovalne enote] 2 x elektronska sistema za zaznavanje višine obdelovanca in dolžine orodja 3 x dodatni zadnji stoperji Samodejno centralizirano mazanje "PC Office" konzola za enostavno premikanje okoli stroja, vključuje: Pgodpfx Aozd Utwoltop Operacijski sistem Windows XP 15" barvni monitor Tipkovnica CD-Rom pogon 40 GB trdi disk 128 MB RAM Serijska št. – AA2 / 000268? Leto – 2008, skladno s CE Stanje – dobro

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT Podpeimr Icefx Altegp With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Stanje: zelo dobro (rabljeno), Panel dividing saw – horizontal – with rear lifting table Control: MCS Evolution Software included Pedpfoq Rffijx Altegp Lifting table (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Maximum cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Maximum saw blade projection (mm): 135 Maximum gripper opening (mm): 125 Scoring saw (max. blade diameter): 20 mm Main saw (max. blade diameter/output): 460 mm / 21 kW Adjustable saw carriage feed (m/min): 6 – 150 No. 1 front air cushion table with 90° rotation device (mm): 2100 x 4100 Total connected load (kW): approx. 36

Stanje: zelo dobro (rabljeno), Panel saw with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table feed (mm): 3800 x 2200 Rear pusher (qty.): 1 With clamping grippers: 7 Rotary device (for panels): up to 90° Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW Pgsdpfoh Imvhex Altop Adjustable saw carriage feed (m/min): 1 - 130 Front air cushion tables (qty.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Leto izdelave: 1961, stanje: pripravljen za uporabo (rabljen), Na voljo je hidravlična enostebrna C-okvirna stiskalnica Müller. Pritisna sila: 63 t, hod: 560 mm, izpust: 325 mm, vgradna višina: 700 mm, dimenzije mize X/Y: 640 mm/640 mm, površina bata: 560 mm/560 mm, dimenzije stroja X/Y/Z: cca 2000 mm/1200 mm/3100 mm, teža: cca 7500 kg. Stroj ima okvaro motorja. Ogled na lokaciji je možen. Pgsdpey Rtg Eefx Altep

Stanje: dober (rabljeno), Leto izdelave: 2003, ELB Rotary 40 NC-K okrogla ploščinska brusilka s premerom mize 400 mm, višina brušenja 300 mm, leto izdelave 2003, upravljanje ELN NC-K, moč vretena 4 kW, brusilni disk 300 x 50 x 76,2 mm, vrtljiva miza z magnetno vpenjalno ploščo premera 400 mm, popolna ohišje, hladilni sistem s papirnatim tračnim filtrom, možno preizkusiti pod napetostjo, z veseljem prevzamemo tudi postavitev/usposabljanje ter kasnejši servis na lokaciji! Financiranje/leasing, ni problema, z veseljem pripravimo ponudbo! Pedpfxeuiafuj Altegp

Stanje: novo, Leto izdelave: 2026, Brusno območje 1000 x 450 mm, premer rotirajoče mize 1000 mm, brusni disk 400 x 100 x 127 mm, moč vretena 11 kW z regulacijo števila vrtljajev, elektro-permanentna magnetna vpenjalna plošča s premerom 1000 mm in regulacijo sile zadrževanja, avtomatski obleki nameščen na vretenasto glavo, vključno s kompenzacijo obsega brušenja, hladilni sistem s filtrom iz papirnatega traku, uporabniku prijazno upravljanje z Mitsubishi SPS krmiljenjem, alternativno SIEMENS 828 CNC krmiljenje, nov stroj z 12-mesečno garancijo, najvišja natančnost po neprekosljivem razmerju med ceno in zmogljivostjo. Na našem razstavnem stroju lahko izvedemo tudi brušenje po želji. Poskrbimo za montažo in izobraževanje na vaši lokaciji ter kasnejši servis. Financiranje/leasing ni problem, z veseljem pripravimo ponudbo! Pjdpfeh I Tz Ssx Altogp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Specifikacije Proizvajalec: IMV Model: DM125 Leto: 2016 Stanje: Rabljeno Skladiščna številka: 0396 Sila drsnika: 1.250 ton Število pritiskov: 2 Kinematika: Ekscentrična, menjava hoda Hod drsnika: 250-400 mm Pedsyw Uf Ajpfx Altjgp Število udarcev/min: 5-35 VERTIKALNA SVETLOBA od držala za matrico, CBRA: 1.150 mm Dimenzije mize: 4.500 x 2.000 mm Dimenzija drsnika: 4.500 x 2.000 mm Stranska odprtina okvirja: 2.600 mm Maks. odprtina sprednjih stebrov: 4.900 mm Premični voziček: 2 kosa Moč glavnega motorja: 290 kW Teža preše: 310.000 kg

Stanje: rabljeno, Leto izdelave: 1964, številka stroja/vozila: 64 / 39.9037 / 2, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 1.200 t, hod: 600 mm, širina mize: 4.500 mm, dolžina mize: 2.700 mm, tabela razdalj do bata: 1.600 mm, razmak između stupova: 5.200 mm, skupna masa: 400.000 kg, Oprema: dokumentacija / priročnik, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 600 mm Strokes per minute: approx. 9 spm Shut height: approx. 1,600 mm Drawing device: Cushion force: approx. 225 t Cushion stroke: approx. 200 mm Pneumatic ejector in ram: Ejector force: approx. 95 t Ejector stroke: approx. 150 mm Heavy-duty mechanical eccentric drawing press in robust double-column design from Schuler, engineered for continuous industrial operation in the automotive sector. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and an additional 600 mm ram adjustment. Stroke rate is approx. 9 strokes per minute. The shut height is approx. 1,600 mm, allowing processing of large-volume dies and components. Particularly noteworthy is the large working area with a bolster size of approx. 4,500 mm and a movable/slide-out press bed, significantly facilitating tool setup and changeover, making the press ideally suited for handling heavy tooling. Pgedpfx Alsy An H Retop The integrated drawing device (cushion) provides a cushion force of approx. 225 t with a stroke of approx. 200 mm, enabling demanding drawing and forming operations typically required in automotive body manufacturing. Additionally, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. The press has not been operated in continuous production at the current location since the 1990s and was used exclusively for testing purposes.