Stefani Solution-5400 nakup rabljenega (5.471)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Gedpfsvf E Avjx Aa Ujuc Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MS06001129, MlttiScan 600 se uporablja za zajem osnovnih podatkov. Artikli se merijo in tehtajo z uporabo 3D-merilne tehnike. Godey U Upvspfx Aa Usuc

Stanje: rabljeno, ETS MPA102/L620M Shaker Vibrationsprüfung & Horstmann HS 220 Klimaprüfschrank Prüfsystem Vibrationsprüfsystem: ETS MPA102/L620M - Sinus-Schubkraft: 600 kgf - Rausch-Schubkraft: 600 kgf - Schockkraft (6 ms, Halbsinus): 1.200 kgf - Maximale Geschwindigkeit (Sinus): 2 m/s - Maximale Beschleunigung (Sinus): 981 m/s² - Armaturdurchmesser: 200 mm - Erste Resonanzfrequenz: 3.300 Hz - Abmessungen: 943 x 633 x 770 mm - Schwingergewicht: 730 kg - Verstärkereinheit: 6 kVA - Lüftereinheit: HP-2 / 4 kW Klimaschrank: Horstmann HS220 - Prüfraumvolumen: 220 Liter - Prüfraumabmessungen: 600 x 600 x 600 mm (HxBxT) - Temperaturbereich: -40 bis +180 °C - Abkühlrate: 2 K/min, 3 K/min - Aufheizrate: 3 K/min - Elektrischer Anschluss: 400V, 3/N, 50 Hz / 5 kW Gjdpfxjy Sl Uqj Aa Uouc - Außenmaße: 1630 x 1700 x 1200 mm (HxBxT) Gebrauchter Artikel – siehe Abbildungen. Versand: Die angegebenen Versandkosten gelten für Lieferungen innerhalb Deutschlands. Weltweiter Versand möglich (Versandkosten außerhalb Deutschlands bitte anfragen). Worldwide shipping available (please kindly request shipping costs). The given shipping costs apply to shipping within Germany. Verkauf ausschließlich an Gewerbekunden, ohne Gewährleistung oder Garantie. Abweichungen der technischen Angaben sowie Irrtümer in der Artikelbeschreibung sind möglich und bleiben vorbehalten.

Stanje: novo, Leto izdelave: 2024, NOV stroj, nikoli uporabljen!!! DN SOLUTIONS PUMA 5100LMB Leto izdelave 2024 Os C z gnanim orodjem Upravljanje FANUC OiF touch Gusdsy H D Ufjpfx Aa Uoc Vpenjalna glava 21 palcev (535mm) Premer vretena 166mm Pomiki: X-362mm Z-2155mm Maksimalna dolžina struženja 2.002mm Maksimalni premer struženja 650mm Revolver z 12 pozicijami BMT 75 Izmetnik ostružkov Knoll

Stanje: novo, Leto izdelave: 2025, DN SOLUTIONS PUMA GT3100L (12/2025) – Dolga postelja Model: PUMA GT3100L Leto: 12 / 2025 Drsni naslon Velikost vpenjalne glave: 12 palcev Maks. premer struženja: ~ Ø480 mm Maks. dolžina struženja: ~ 2.000 mm (dolga postelja) Premer vretena: 102 mm Hitrost vretena: 3.000 vrt/min Moč glavnega motorja: 26 kW Gsdpfx Aaoy Hfh He Ujuc Maks. navor: ~ 735 Nm Hitri pomik X osi: 24 m/min Hitri pomik Z osi: 24 m/min Tip vodenja: box vodenje Krmilna enota: Fanuc i Plus Revolver: 12 postaj

Stanje: zelo dobro (rabljeno), NAŠ STROJ JE NA CARINI V ISTANBULU. Turkuaz CNC DN Solutions (DOOSAN) PUMA GT3100 12 palcev Model 2022.09 maksimalna dolžina obdelave: 755 mm Guedpfsywuqfox Aa Uoc maksimalni premer obdelave: 481 mm Vreteno: 102 mm merilna roka, tračni transporter krmilna plošča Fanuc i PLUS 4249 ur obratovanja Za podrobne fotografije, videoposnetke in informacije nas kontaktirajte. Muhammed ÖZKAYA

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SPE-Spero-LTX-340, Naprava je bila uporabljena za raziskovalne namene, SPE-Spero-LTX-340, MIR-mikroskop s funkcijo »Hyper Spectral Imaging« (spekter 1900 do 950 1/cm). Izboljšano LowMag lečo 4,0X; NA:0,3, 2,0 mm vidno polje. Ekskluzivno IR-transmisijsko delovanje. Širokopasovna mikrobolometerska kamera 480*480 pikslov. Vključuje visoko natančno avtomatizirano mizico (< 1 μm ponovljivost) in hitro zbiranje podatkov, joystick, nadzorni računalnik, Win10. „Discrete Frequency IR-Imaging“ v realnem času. 2000 ur/1 leto garancije. SPE-Spero-LT-EXT-WAR-12-2000. Nova cena: 240.102 evrov. Prodaja brez garancije, kot je vidno. Gusdpfx Aaoyxc Twj Uec

Stanje: novo, Leto izdelave: 2026, We offer: Pellet machines from WALW-Solutions, featuring unique quality, honest workmanship, and fair pricing. Honest Workmanship: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Pricing: We manufacture in Poland and are transparent about it. Other competitors who label their products as “Made in Germany” often only assemble them in Germany, while sourcing components mostly from Lithuania. With us, you benefit from the lower production costs, resulting in our offer prices typically being 40% below those of our competitors. These pellet production machines are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your in-house sawdust from firewood production or your carpentry operation, to professional production of industrial-scale pellets from wood chips, straw, miscanthus, and more—as well as production of hay or straw cuboids—we can provide you with the right solution! Our systems offer capacities from 150 kg/hour up to 5 tons/hour and are equipped with all necessary components for a fully automated operation. For every type of input material, we find a suitable solution and options to integrate automation into existing systems. All machines and control systems are equipped with components from Siemens, ABB, Schneider Electric, or similar. Gsdelt Ugtopfx Aa Ueuc Please note: for buyers with a valid VAT ID, net purchasing is available! We look forward to your inquiry! If you are interested, please feel free to contact me directly by mobile at: [number]

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 300 mm, premer struženja: 300 mm, izvrtina vretena: 52 mm, največja hitrost vretena: 4.500 obr/min, model krmilnika: FANUC CNC, TEHNIČNI PODATKI Maks. premer struženja: 300 mm Maks. dolžina struženja: 300 mm Vretenova odprtina: 52 mm Glavna vretena hitrost: 4.500 min⁻¹ Orodjarski revolver: 12 postaj PODATKI O STROJU Teža stroja: 2.200 kg OPREMA Horizontalni CNC stružnica Gsdpoyvfvuefx Aa Ueuc Visoko zmogljivo glavno vreteno Robustna konstrukcija stroja za visoko dimenzijsko natančnost Orodjarski revolver s hitro indeksacijo Kompaktna zasnova, mala potreba po prostoru Uporabniku prijazna CNC krmiljenje Visoka zanesljivost in nizko vzdrževanje Krmiljenje: FANUC CNC

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Puma 2600, premer struženja nad prečnim suportom: 630 mm, stružna dolžina: 1.245 mm, premer struženja: 376 mm, izvrtina vretena: 102 mm, največja hitrost vretena: 2.800 obr/min, moč vretenovega motorja: 26 W, vrsta vhodnega toka: trifazni, proizvajalec krmilnikov: FANUC, število vreten: 2, delovne ure vretena: 7.800 h, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, For sale: CNC turning center with sub-spindle and Y-axis. Machine is in excellent condition. Purchased brand-new mid-2023 and still in operation. Less than 8,000 working hours to date, producing parts well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot integration: autodoor and communication signals provided. Equipped with parts conveyor and oil mist filter. NOTE: The robot is not included in the offer—possible sale and implementation support available at separate quotation. TECHNICAL DATA (as per manufacturer's specification): 1) Capacity Swing over bed: 680 mm Guodpfx Aex Rqkusa Ujc Swing over carriage: 630 mm Max turning diameter: 376 mm Recommended turning diameter: 315 mm Max turning length: 1245 mm Admissible workpiece weight (incl. chuck): In chuck 500 kg (1,000 kg with support) Bar capacity: Ø102 mm 2) Main Spindle Chuck size: 315 mm Spindle type: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck passage: 103 mm Spindle motor power (cont./30 min): 26/22/18.5 kW (S3 25%/S6 60%/S1 Cont.) Spindle speed range: 2,800 rpm Max spindle torque: 1,123 Nm (15 min S3 15%) Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (option: 210 mm) Spindle type: A2#5 ASA Spindle bore: 62 mm Sub-spindle cylinder clearance: 50 mm (H8) Sub-spindle drive power (cont./30 min): 7.5/5.5 kW (30 min/S1 Cont.) Spindle speed: 4,500 rpm Max torque: 85 Nm (30 min) Power transmission: Belt 4) Axis Travels X-axis: 260 mm Z-axis: 1,350 mm Y-axis: 105 mm (±52.5 mm) B-axis: 1,350 mm C-axis: 360° (0.001° increments) Rapid traverse (X): 30 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 10 m/min Rapid traverse (B): 30 m/min C-axis speed: 200 rpm 5) Bed and Saddle Slant bed, incline angle: 30° Bed guideway width (Z): 437 mm Saddle guideway width (X/Y): 321/325 mm Sub-spindle clearance: 335 mm 6) Tool System Tool holder: BMT 65P Tool stations: 12 Tool size: 25 x 25 mm Max drill diameter: 50/32 mm (main/sub-spindle) Driven tool power: 7.5/1.5 kW (5 min/Cont.) Driven tool speed: 5,000 rpm Driven tool torque: 95.5 Nm Driven tool collets (ER32): Ø3–Ø20 mm (option) Turret indexing: 1 position/0.15 s, 1.2 s full station Max driven tool drilling diameter: Ø20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning (X, Z, Y, C): 0.01 mm Repeatability: X/Z/Y axes: ±0.002/±0.003/±0.003 mm C axis: ±0.006° 10) Other Electrical control X/Z/Y axes: 0.02 mm C axis: 0.0167° For any questions or further information, please send us a message or contact us by phone.

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SPE-Spero QTX-340, Naprava je bila uporabljena za raziskovalne namene, SPE-Spero QTX-340, MIR-mikroskop s funkcijo „Hyper Spectral Imaging“. Spektralna pokritost področja prstnih odtisov (1900 - 950 1/cm). High-Res-IR objektiv: 12,5X; NA:0,7, 650μm FOV. Enhanced LowMag-Lens Za vidno svetlobo: 4,0X; NA:0,13, 650μm FOV. 480*480 slikovnih pik, širokopasovna mikrobolometerska kamera. Kamera za vidno svetlobo. QT-Laser-Performance-Paket vključno z visoko natančnim avtomatiziranim odrom (< 1μm ponovljivost natančnosti). Hitro zajemanje podatkov. Joy Stick, kontrolni računalnik, Win10. »Diskretna frekvenčna IR-slikovna« v realnem času. Delovanje v transmisiji in refleksiji. 4000 ur aktivnega laserja. Gujdpfx Aaoy Dcd Hj Ujc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 1013, REF: MM6216 1 x Comek vertikalni stroj za oblikovanje, polnjenje in zapiranje z zaslonom Zodiac HS Tehnična specifikacija ⚙️ ✅ Proizvajalec – Comek Automatic Packaging Solutions ✅ Model – VPB 330 EVO ✅ Serijska številka – 1013 ✅ Leto izdelave – 2019 ✅ Teža – 2.500 kg ✅ Vgrajena moč – 10 kW ✅ Zobniki za varjenje – 330 mm (vodoravno) x 460 mm (navpično) ✅ Skupne mere – 2.000 mm dolžina x 1.500 mm širina x 1.800 mm višina Opomba 🗒️ Brez tiskalnika. Godpfxexd Ubnj Aa Usuc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, • 4 new EDI cells MK3 are available • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled Gujdpfx Aaewy Uu As Ujc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 11.537 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.000 kg, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 350 mm, dolžina obdelovanca (maks.): 1.030 mm, Machine d'électroérosion à fil de 2021 avec seulement 11 537 heures de fonctionnement ! CARACTÉRISTIQUES TECHNIQUES Courses Course axe X : 600 mm Course axe Y : 400 mm Course axe Z : 350 mm Données sur la pièce Poids de la pièce : 1 000 kg Hauteur maximale de la pièce : 350 mm Largeur maximale de la pièce : 800 mm Guodpfx Aajx I Akuo Uec Longueur maximale de la pièce : 1 030 mm Table Largeur de la table : 630 mm Longueur de la table : 950 mm DÉTAILS DE LA MACHINE Dimensions & poids Dimensions (L x l x H) : 3 400 x 2 160 x 2 320 mm Poids total : 5 440 kg Heures d’érosion : 11 537 h Heures de mise sous tension : 29 381 h Type de courant d’entrée : courant triphasé ÉQUIPEMENT Graissage centralisé manuel pour la série CUT E Kit échangeur thermique Enrouleur de grandes bobines de fil 25 kg, série CUT E Coupe-fil pour la série CUT E Voyant lumineux Remarque : le démontage et le chargement peuvent être effectués par le vendeur contre supplément.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.294 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 550 mm, premer struženja: 390 mm, Premer palice (maks.): 81 mm, DN SOLUTIONS DOOSAN PUMA GT2100B – LETNIK 2023 🔹 Količina: 2 enoti 🔹 10” vpenjalna glava 🔹 Ø81 mm vretenjska odprtina 🔹 Največja dolžina struženja: 550 mm 🔹 Največji premer struženja: Ø390 mm 🔹 Prizmatična vodila 🔹 Krmilje Fanuc i PLUS Podrobnosti o stroju: • Stroj 1: 1294 obratovalnih ur (opremljen s programabilnim konjičkom in prednastavitvijo orodja) • Stroj 2: 1230 obratovalnih ur (brez prednastavitve orodja) 📞 Za podrobne videoposnetke, fotografije in dodatne tehnične informacije nas kontaktirajte. Stopite v stik za več informacij. Kontakt: Gsdpfoyw Thijx Aa Uouc Muhammed Özkaya

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, skupna širina: 120 mm, skupna dolžina: 220 mm, skupna višina: 245 mm, uporabna prostornina rezervoarja: 3.300 l, Treasure v skladu z Valrem. Ognjevarna zaščita > 120 min Zunanje dimenzije: Dolžina: 220 cm Gusdeykapfjpfx Aa Usc Širina: 120 cm Višina: 245 cm Notranje dimenzije: Dolžina: 170 cm Širina: 95 cm Višina: 210 cm

Stanje: rabljeno, Extraction system, central extraction unit, ambient air filtration system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow volume: approx. 5000 m³/h Extraction inlet at filter: 1200 x 150 mm Exhaust outlet at filter: 400 x 300 mm Motor power: 10 kW Power supply: 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Guodpfx Aajicic He Uoc Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 60919029293, This UV printer replaces conventional laser printers—also enables full-color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1812 Color configuration: C M Y K LC LM + White + Varnish, or Dual CMYK + WWWW (White) + VVVV (Varnish) Printhead: Epson TX800 Maximum resolution: 2,690 dpi Godpfx Ajga U Tdoa Uouc Includes printer and image editing software Dimensions: approx. 260 cm (L) x 160 cm (W) Weight: 750 kg Maximum print area: 1,800 x 1,200 mm, with a print height of up to 150 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – enabling color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Printhead: Epson TX800 Gedefbmgfepfx Aa Ueuc Maximum resolution: 2690 dpi Includes software for printer operation and image editing Weight: 90 kg Control display Table movement via leadscrew technology 360-degree printing capability available on request: for bottles and cylindrical objects A2 format: 45 x 65 cm and up to 20 cm height supported Assistance with software setup and printer instruction available upon request, Germany/Europe-wide.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 60919029293, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. Guodpfxega U Tao Aa Ujc New model: PS1612 C M Y K LC LM + White + Varnish or with Double CMYK + WWWW (White) + VVVV (Varnish) Printhead: Epson TX800 Maximum resolution: 2690 dpi Includes software for printing and image editing Dimensions: approx. 240 cm (L) x 160 cm (W) Weight: 650 kg Print area: 1600 x 1200 mm, with a maximum print height of 150 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – it also prints in color on glass, wood, textiles, plastic, metal, and many other materials. Gujdpjd Hydhefx Aa Uoc New model: PS10157V Colors: C M Y K LC LM + White + Varnish option included Printhead: Epson TX800 Maximum resolution: 2,690 dpi Including software for printer operation and image editing Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing for bottles/round objects (surcharge applies) A1+ format: 100 x 150 cm with a print height of 170 mm 8x 500 ml ink cartridges can be supplied! (surcharge applies) + VARNISH FUNCTION included Software installation and printer training available upon request, nationwide in Germany/Europe (surcharge applies). Printing videos and further info available upon request via email/WhatsApp.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – it can also print in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1015 Gujdpfjd Ew A Uox Aa Uec C M Y K LC LM + White Print head: Epson TX800 Max. resolution: 2690 dpi Includes software for printer operation and image editing Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree operation: Bottles/round objects (optional at extra charge) A1+ size: 100 x 150 cm and up to 70 mm print height possible 7 x 500 ml ink set can be supplied (optional at extra charge) + VARNISH FUNCTION AVAILABLE Software setup and printer training available on request. Throughout Germany/Europe (optional at extra charge). Printing videos etc. can be sent via email/WhatsApp upon request.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV DTF printer – a digital flatbed printer – replaces conventional laser printers and is also capable of producing colored prints on glass, wood, textiles, plastic, metal, and many other materials. Easy to peel off and apply to a wide variety of surfaces! New model: UV4060DTF Printhead: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer management and image editing. Dimensions: 800 x 858 x 566 mm Weight: 70 kg A3 format: 31 x 55 cm and possible height up to 23 cm Gusdpfx Aasg Icd Ss Uec 5 x 500 ml ink bottles can be supplied (surcharge applies). Software setup and printer instructions provided on request, Germany/EU-wide (surcharge applies). Printing demonstration videos, etc., can be sent via email or WhatsApp upon request.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – including color prints on glass, wood, textiles, plastic, metal, and many other materials. C M Y K LC LM + W + V New model: PS2513 Air table Print head: Epson TX800 Max. resolution: 2690 dpi Includes printer and image editing software Gusdpfed Hbl Dex Aa Uoc Dimensions: 2.85 × 1.9 × 1.55 m Weight: 800 kg Printable area: 250 × 130 cm; maximum print height: 70 mm 8 × 500 ml ink cartridges can be supplied (surcharge applies) + VARNISH FUNCTION INCLUDED Software setup and printer instruction available upon request, across Germany/Europe (surcharge applies) Printing videos and further information can be provided via email/WhatsApp upon request.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 60919029293, This UV printer replaces conventional laser printers – even enabling color printing on glass, wood, textiles, plastic, metal, and many other materials. New Model: PS6090 Max Pro Speed Champion! Printable area: 70x100 cm Printing height: 150 mm Vacuum air table Gujdpsfvyagofx Aa Uoc Water circulation system Print head: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV – 18 channels) Resolutions: 720x1080 / 720x1440 / 720x2160 dpi Includes printer and image editing software Dimensions: 1900x1600x1220 mm Weight: 400 kg