Stefani Obojestranski Brusilnik Robov nakup rabljenega (1.968)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Schwanberg
69 km
Stroj za rezkanje robov
SCM / HOLZKRAFTformula VFK 160
Pokliči
Stanje: novo, Clean air extraction / dust extractor
Dust tested to H3 standard, residual dust content less than 0.1 mg/m³
Suitable for extracting and separating dry wood and plastic chips
High extraction performance with minimal space requirements
Maximum output in this class
Very quiet operation
Designed for commercial use
Sturdy and compact housing made of galvanized sheet steel
Extraction port easily convertible from left to right, offering flexible use
Large maintenance openings
Large, mobile chip containers with clamping bracket and chip collection bag
Dust extractor is delivered fully assembled, ready for immediate use
All models are mobile
Filter material made from polyester fleece, aluminum-coated for long service life
Filters are antistatic as standard, certified and approved according to Category M-BIA
The fan is installed downstream of the filter
Extraction motor energy efficiency class: IE3
Nominal airflow: 1,448 m³/h
Nominal negative pressure: 2,242 Pa
Drive motor power: 2.2 kW, 400 V, 50 Hz
Chip collection volume: 2 x 165 l
Ijdpjr A Eq Rjfx Ab Astg
Outer diameter of extraction inlet: 160 mm
Filter surface area: 9.21 m²
Residual dust content: < 0.1 mg/m³
Maximum sound pressure level: 73 dB(A)
Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm
Weight: approx. 268 kg
PM VERSION
Automatic filter cleaning with pneumatic system, operating a wiper frame
Mali oglas
Schwanberg
69 km
KAM, stroj za lepljenje robov
OTTTornado
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm
Workpiece thickness: 8 - 52 mm
Minimum workpiece width: 70 mm
Minimum workpiece length: 150 mm
Automatic edge magazine
Jointing milling unit: 2 x 1.5 kW, controlled feed
End trimming unit: 2 x 0.3 kW
Flush milling unit: 2 x 0.7 kW, one-sided tracing
Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees
Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing
Corner copying unit: 2 x 0.3 kW
Scraper unit, automatically controlled
Surface scraper unit with fine adjustment feature
Buffing unit: 2 x 0.2 kW, oscillating
Itjdpfslc Ewiox Ab Aog
5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent)
Color touch screen control OTT C3
Motorized height adjustment
Feed speed: 10 - 14 m/min
Infinitely variable feed speed
COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l
CE marking
Total connected load: 12.6 kW
Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm
Weight approx.: 2,900 kg
Mali oglas
Schwanberg
69 km
Naprava za obrezovanje robov, stroj za obrezovanje robov
OTTTKS 1
Pokliči
Stanje: zelo dobro (rabljeno), Edge cutting device
Ijdpfxswiwnqs Ab Astg
Working height: 800 mm
Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm
Compressed air connection: 6 bar
Weight approx.: 120 kg
Cutter included

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCMSandya UNO RCS
Pokliči
Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding
SCM
Model RCS
1st Unit: Calibration roller, steel
2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft))
Working width: 920 mm
Abrasive belt dimensions: 930 x 1,525 mm
Motor power: 11.0 kW, 400 V, 50 Hz
Feed motor power: 0.37 kW, 400 V, 50 Hz
2 feed speeds
Electromotoric table height adjustment
Main switch lockable
Itodpfx Abexqggco Asg
2 x emergency stop
Table extension with 2 rollers, front & rear
Sanding pad inserts fitted with new graphite cloth
Includes nearly new abrasive belts
Includes all documentation
Note for used machinery:
• Errors in technical specifications and intermediate sale reserved.
• Listed prices are ex-works and free loading!
• The machinery has been cleaned and function-tested.
• All machines are sold as seen, with no warranty or guarantee whatsoever.
Buyers are welcome to inspect the machines on site.
• Special agreements are only possible in written form.
(We only respond to inquiries that include your full address and telephone number!)
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SACrte 1000
Pokliči
Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing
Working width: 1000 mm
Abrasive belt dimensions: 2200 x 1030 mm
Workpiece dimensions: 3 - 170 mm
Table height adjustment motor: 0.18 kW, 400 V, 50 Hz
Main motor: 7.5 kW, 400 V, 50 Hz
2 feed rates: 5.5 & 11 m/min
1st Unit:
Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad
Sanding pad NEW
2nd Unit:
Cleaning brush
Compressed air requirement: approx. 6 bar
Extraction port diameter: 200 mm
Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm
Weight: approx. 1,800 kg
Automatic workpiece thickness adjustment with digital display
Sanding belt oscillation
Emergency stop for sanding belt with disc brakes
Table extension with 3 outfeed rollers
Emergency stop button
Main switch
CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago
Itedpsudxchefx Ab Ajg
OVER 30 WIDE BELT SANDING BELTS INCLUDED
Note on used machines:
• Technical data subject to change and prior sale.
• Prices quoted are ex location – free loading.
• The machine has been cleaned and tested for functionality.
• All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises.
• Special agreements only valid in written form.
(We will only respond to inquiries that include your address and phone number!)
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCM DMCChronosand 2 RRP 1100
Pokliči
Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding
Isdpfetwzyfsx Ab Astg
Working width: 1100 mm
Min/max workpiece height: 3 - 120 mm
Feed motor power: 0.8 kW
Abrasive belt speed: 18 m/sec
Abrasive belt dimensions: 1115 x 2620 mm
Feed speed: 4.5 / 9 m/min
Extraction port: 3 x 160 mm
Compressed air connection: 6 bar
1st Unit: Sanding roller
Rubber-coated 90 Sh
Motor power: 11 kW
2nd Unit: Combination unit
Rubber-coated sanding roller 60 Sh
Rigid sanding pad
Motor power: 11 kW
3rd Unit: Cleaning brush
Automatic workpiece thickness adjustment at infeed with digital thickness display
Table extension at outfeed
Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm
Weight (approx.): 3000 kg
Note for used machines:
• Subject to technical changes and prior sale.
• Prices quoted are ex-location and free loaded.
• The machine has been cleaned and function tested.
• All machines are sold as inspected, without any warranty claims.
Buyers are welcome to inspect the machine at its location.
• Special agreements are only valid if made in writing.
(We only respond to inquiries that include your address and phone number!)
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCM / DMCsd 60 RRCS
Pokliči
Stanje: novo, Wide belt sander for calibration and fine sanding
Working width: 1,100 mm
Min./Max. working height: 4 / 170 mm
Abrasive belt width: 1,115 mm
Abrasive belt length: 2,150 mm
Gear motor: 2.2 kW
Feed speed: variable m/min
Infeed and outfeed support rollers for long and short workpieces
Oscillating belt cleaning blower 1st unit
Oscillating belt cleaning blower 2nd unit
Oscillating belt cleaning blower 3rd unit
10” touchscreen operating panel “eye-S”
1st unit: steel roller
2nd unit: rubber-coated calibrating roller 85SH
3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH
Motor power 1st unit: 18.5 kW
Motor power 2nd & 3rd unit: 18.5 kW
Version "B" for RRCS with:
pneumatic switching on/off 1st unit
pneumatic switching on/off 2nd unit
pneumatic switching on/off 3rd unit
“MESAR” elastic segmented sanding pad
pneumatic switching on/off of the sanding pad unit
Iedoitvkuopfx Ab Aetg
electronic adjustment of working height
SPECIAL PRICE!
AVAILABLE IMMEDIATELY!
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCM DMCsd 70 RCS 135
Pokliči
Stanje: novo, Technical data:
Working width mm: 1,350
Min./max. working height mm: 4 - 170
Abrasive belt width/length mm: 1,370 / 2,620
Main motor power kW: 18.5 with inverter
Feed speed variable m/min: 3.5 - 18
Working units:
1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm
2nd unit: Combi:
Rubber-coated sanding roller diameter 160 mm, 45 Sh
Elastic electronic segmented sanding pad “MESAR” with 24 segments
Version C:
- Elastic electronic segmented sanding pad “MESAR” complete with:
- Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit
- Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece.
Versions 135:
“MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed
Additional equipment:
Roller table at infeed and outfeed for long workpieces
Perforated table and conveyor belt
Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame
Isdpehtuvrefx Ab Aetg
Oscillating blow-off unit 2nd unit
Touch screen 10.4” display with ‘eye S software integration’
PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!
Mali oglas
Schwanberg
69 km
Brusilnik z dolgim trakom
HÖFERBSM II
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm
Abrasive belt dimensions: 6800 x 150 mm
Motor power approx. 3.0 kW
Table height adjustment: mechanical
Right and left rotation
2 abrasive belt speeds
Abrasive belt cover on top
CE compliant
Includes special grinding shoe
Note on used machines:
• Technical specifications may contain errors; subject to prior sale.
• The indicated prices are ex-works – free loading.
• The machines have been cleaned and functionally tested.
• All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site.
Ijdpsv D H Siefx Ab Astg
• Special agreements are only valid if made in writing.
(We only respond to inquiries that include your address and telephone number!)
Mali oglas
Schwanberg
69 km
Brusilnik z dolgim trakom
LANGZAUNERLZG
Pokliči
Stanje: zelo dobro (rabljeno), Belt Sander
LANGZAUNER
Model LZG
Approximate table dimensions: 2500 x 800 mm
Iedpfxsuxnyus Ab Astg
Approximate sanding belt dimensions: 6800 x 150 mm
Motor power approx.: 3.0 kW, 400 V, 50 Hz
Motor protection switch
Manual table height adjustment
Right/left rotation of sanding belt
Sanding belt cover (top)
Work area light strip
CE compliant
Includes special sanding shoe
Includes extraction fan
NEW GRAPHITE CLOTH
Notes on used machines:
• Subject to technical changes, errors, and prior sale.
• Quoted prices are ex-location, free loading!
• The machine has been cleaned and function-tested.
• All machines are purchased as seen, without any warranty entitlement.
Buyers are welcome to inspect the machine at its location.
• Special agreements are only valid in written form.
(We only respond to inquiries that include your address and telephone number!)
Mali oglas
Trag
71 km
Brusilnik s širokim pasom
SCM DMCSD 90
Pokliči
Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus”
Technical Specifications
Usable Working Width: 1350 mm
Min./Max. Working Height (with fixed table): 4 – 200 mm
Abrasive Belts: 1,370 x 2,620 mm
Feed Speed: 3.5–18 m/min
Working Units:
• “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed
• 1st Position: “RA” angled ribbed steel contact roller D=250 mm
• 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore
• Floating pressure shoe at 1st position with pneumatic adjustment
• 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions
• Oscillating blow-off device at 1st and 2nd units
• Workpiece cleaning unit with rotating air nozzles
Drive:
• Motor 1st unit: 18.5 kW
• Motor 2nd unit with inverter: 15 kW
Table:
• Fixed table, working height 900 mm
• Infeed roller table for long workpieces
• Outfeed roller table for long workpieces
• Perforated table and conveyor belt, 50 Shore
• Vacuum table with integrated electric fan 4 kW in machine base
• Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW)
Control:
• Electronic programming unit “Pro-Sand”
• 10.4" touch screen display
Ijdpfx Abed E Ixzo Ajtg
• Door with inspection window on operator side for machines with 2 working units
• LED interior lighting
Note on used machines:
• Subject to technical changes and prior sale.
• Quoted prices are ex-location, loaded free of charge!
• The machines have been cleaned and function tested.
• All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location.
• Special agreements are only possible in written form.
(We will only respond to inquiries including your address and telephone number!)
Mali oglas
Škofja vas
28 km
Stroj za oblaganje robov
HOMAGS 500
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25)
Year of manufacture: 2022
Serial number:
Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia.
Technical data and equipment:
Continuously adjustable feed speed: 16–25 m/min
Workpiece thickness: 8–60 mm
Fixed fence on the left-hand side
Working height adjustable
Pre-installation for LOOPTEQ O-200/O-300 return system
Feed lock system
Workpiece alignment at infeed with roller support
Itedpfx Absxwurye Ajg
Top pressure unit
Sizing package with DIA joint trimming cutter set WD40
Gluing package with preheating up to 60 mm thickness
Adhesive application system with emptying function
Edge magazine with two vertical roll holders
Pressure zone
PERFORMANCE2 package
End trimming unit PK25
Rough trimming unit BF10 (I-HM straight cutter set)
Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii)
Multi-scraper MN21 automatic with profile knife set
Cleaning agent spraying unit
Glue joint scraper FA20 BASIC
Buffing unit FP10 top and bottom
PowerControl PC23 PowerTouch control system
TAPIO Ready
Ethernet network connection
Wired manual control for setup operation
Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions
Documentation in Slovenian (digital and paper format)
Remote service enabled
Mali oglas
Avstrija
156 km
Stroji za olepljanje robov Sklop 1
HOMAG + KUKAKFL10 + KR
Pokliči
Stanje: rabljeno, številka stroja/vozila: 008522, Pozicija 1: Robot HOMAG + KUKA-KFL10 + KR
Pozicija 2: Enostranski robni lepilni stroj HOMAG + KUKA-KFL10 + KR
Pozicija 3: Robot HOMAG + KUKA-KFL10 + KR
Itsdpsy Nx U Eofx Ab Aog
Pozicija 4: Povrat plošč HOMAG + KUKA-KFL10 + KR
Mali oglas
Wien
249 km
Stroji za odstranjevanje robov, stroji za rezkanje faset
MatchlingMCL-300R
Pokliči
Stanje: rabljeno, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 480 mm, skupna širina: 250 mm, skupna višina: 320 mm, delovna višina: 320 mm, vhodna napetost: 230 V, dolžina mize: 300 mm, širina mize: 250 mm, vhodna frekvenca: 50 Hz, moč: 0,735 kW (1,00 KM), vrsta nastavitve višine: mehanski, Stroj za odstranjevanje srobov za konture, stroj za posnemanje robov s frezo
Proizvajalec: Matchling
Tip: MCL-300R
Malo rabljen
Priključek: 230 V
Motor: 0,735 kW
Obratov: 1000 do 6000 min⁻¹
Posnetje robov: 0–3 mm, brezstopenjsko nastavljivo
Vpenjalna izvrtina za rezkar: Ø 10 mm
Dimenzije:
Dolžina: 480 mm
Ijdpfx Aboy Szgvj Aotg
Širina: 250 mm
Višina: 320 mm
Teža: 32 kg
Vključena oprema:
4 kos rezkarjev za posnemanje 45° VHM
1 kos četrtkrožni rezkar R1 VHM
2 kos krogličnih ležajev z osjo
1 kos vodilna letev
1 kos fiksni vodilni zatič z nosilcem
2 kos adapterjev (reduktorskih puš) za Ø 6 mm in Ø 8 mm
Mali oglas
Tatabánya
303 km
Stroj za ostrenje svedrov, brusilnik za orodje
Schanbachers3-50
Pokliči
Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50
Proizvajalec: Schanbacher
Isdpfxjx Dblts Ab Astg
Tip: S3-50
Leto: 2012
Dimenzije: 460 × 600 × 1260 mm
Premer svedra: 3–50 mm; Kot konice: 90°–140°
Vključuje: zaščitni pokrov, sistem za odvajanje prahu
Mali oglas
Spatenhof
94 km
Stroj za oblaganje robov
HOLZ-HERAURIGA 1308XL
Pokliči
Stanje: rabljeno, Holz Her Auriga 1308 XL
Iodpfx Abey Icmpo Astg
compact design – edge thickness 0.4 – 8 mm
SPS screen control Edge-Control, PPC color touchscreen monitor
iTronic adaptive pressure and glue volume control and cleaning routine
Pre-milling unit for jointing prior to gluing section
Fully automatic edge magazine for coil and strip material
GLU JET cartridge glue application station + PUR bonding, with sensor-controlled nozzle
Workpiece height 8–60 mm
High gloss package
Pneumatic pressure unit
Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the trimming saws from 0–10° inclination
1827 MOT4 multifunction milling unit: flush trimming up to 8 mm, radius trimming – bevel trimming at 15° via NC axes
Contour milling unit – corner rounding up to 3 mm edge thickness, working height 12–60 mm, postforming possible
1929 MOT4 scraper unit for bevels and radii with 2 scraper holders via NC axes
FK701 flat scraper unit with pre- and post-sensing – finish
Buffing unit – polishing
Spray equipment at infeed and outfeed
Spray equipment with lubricant for high-gloss edges
Complete DIA tooling included
First delivered in 2020
Machine in TOP CONDITION from lease return – small business
Available from stock Lieboch
Mali oglas
Nemčija
394 km
Brusilnik s širokim pasom
BütferingClassic 111 E
Pokliči
Stanje: rabljeno, Leto izdelave: 2001, Used machine
Year of manufacture: 2001
Features and technical data:
- Constant working height
- Equipped with combination unit featuring a steel contact roller and electronic CPS segmented pressure beam with 25 mm division
- Sanding width: 1100 mm
- Sanding belt length: 1900 mm
- Workpiece thickness min./max.: 3 - 150 mm
- Feed speed: stepless 2.5 - 13 m/min
- Sanding unit: 11 kW
Painting package:
- Infinitely variable belt drive speed via frequency inverter
- Belt blow-off device
- Vacuum conveyor belt with blower
Control system:
- Terminal with 50 program memory slots
- Simple menu navigation via plain text display
- Visual indication of active elements during operation
- Fully automatic PLC-controlled start sequence of all drives
- Digital working time recording
- With cleaning brush
- Roller table at infeed
- Roller table at outfeed
Extraction capacity: 1850 m³/h
Extraction ports: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm
Compressed air connection: 6-8 bar
Air consumption: 10 l/min
Weight: 2200 kg
Isdpfx Aewka Snjb Astg
Availability: by arrangement
Location: Röllbach
Mali oglas
Trzin
35 km
Stroj za oblaganje robov
OttOTT 25.8F + Ligmatech ZHR 15
Pokliči
Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Naprodaj: OTT Unimatic 25.8F lepilka za robove z vračalno mizo Ligmatech ZHR 15
Prodajamo lepilko za robove OTT Unimatic 25.8F skupaj z vračalnim transportnim trakom Ligmatech ZHR 15. Napravi se prodajata izključno kot komplet (linija).
Ključne značilnosti in prilagoditve:
Prilagojene utorne enote: Stroj je nadgrajen z dvema dodatnima rezkalnima enotama—ena omogoča bočno utorjenje s sprednje strani, druga pa izvaja vertikalno utorjenje od zgoraj. Stroj je bil pretežno uporabljen za proizvodnjo notranjih podbojev vrat.
Dodatki za stabilnost: Na notranji strani so bili vgrajeni posebej izdelani stabilizacijski valji, ki omogočajo natančno obdelavo ozkih obdelovancev.
Nedavno vzdrževanje: Lani je bila popolnoma zamenjana enota za nanašanje lepila (vključno z valjem). Menjani so bili tudi členki (nakladalne čevlje) verige.
Stanje in dimenzije:
Stanje: Stroj je redko rabljen, vendar je bil redno vzdrževan in servisiran pri podjetju TIBO. Trenutno je v celoti delujoč in ga je možno preizkusiti na lokaciji.
Itsdpfx Abeygl A Ao Aeg
Dimenzije: Skupna dolžina linije znaša 11 m, širina 2 m.
Prosimo le za resne povpraševanja.
Mali oglas
Nattheim
457 km
Stroj za oblaganje robov
HebrockAKV 3005 DK -F airtronic
Pokliči
Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm.
Technical description:
- Hot-melt adhesive application to the workpiece for edge materials up to 3 mm
- Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit
- Maintenance-free, coated gluepot
- HF end trimming station (16,000 rpm) for front and rear protruding edges
- HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side
- Spare spaces for additional machining units (Hebrock system)
- Feed approx. 10 m/min
- Cutting depth adjustment for end trim saw
- Signal lamp for workpiece sequence
- Robust chain drive
- Ergonomically arranged control panel
- Double pressure roller top beam
- Viewing windows on both rear and operator sides
- PLC control including touchscreen
Technical data:
- Feed speed: 10 m/min
- Panel thickness: 8–40 mm
- Weight (depending on configuration): approx. 1,400 kg
- Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm
Airtronic for machines up to 8 mm edge thickness, 1 piece
Technical data:
- Edge thickness: 1.2–3.0 mm possible
- Maximum panel thickness: 25 mm
- Feed speed: 7–10 m/min depending on edge material
- Ready for operation: 3 min
- Air consumption: approx. 800 l/min for entire machine
Itjdpfxoy S Tqyj Ab Ajg
- Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw
- Extraction as usual
- PLC control is mandatory
Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness
Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius)
Buffing station (polishing wheel), 1 piece
Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm
Minimum workpiece length: 300 mm
Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device
Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation
Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device
Special cleaning system for PU glue outlet downward, 1 piece
60 mm panel thickness for machines w/ jointing, 1 piece
- Max. workpiece thickness with jointing unit: 60 mm
- Jointing range at 40 mm–60 mm
- Workpiece thickness up to 2 mm
Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness
- Max. overlay protrusion: 8 mm
Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction
- Highly recommended from AKV 3005 DK-F
Ball bearing for corner rounding unit, 24.1 mm, 1 piece
Ball bearing for corner rounding unit, 24.2 mm, 1 piece
Nesting for combination milling unit, 1 piece
- For processing workpieces with hinge cup drillings
- Only possible on underside of workpiece
Nesting for radius scraper unit, 1 piece
- For processing workpieces with hinge cup drillings
- Only possible on underside of workpiece
Release agent spray unit, 1 piece
Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue
Antistatic spray unit, 1 piece
- Mandatory for airtronic
- Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang
Storage location: Supplier
Mali oglas
Trzin
35 km
Stroj za oblaganje robov
HOLZ-HERSprint 1329 multi + Return Master 5920
Pokliči
Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Naprodaj: Premium Holz-Her 1329 Multi robni lepilni stroj + Return-Master 5920
Prodajamo vrhunski robni lepilni stroj Holz-Her 1329 Multi, vključno z vračalnim sistemom Return-Master 5920. Enota je stara 4 leta in je v odličnem stanju.
Prvotna cena novega: 138.000 € + DDV
Naša cena: 64.000€ + DDV (prihranek 50 %)
Zakaj izbrati ta stroj?
Pridobite vrhunsko, malo rabljeno napravo po isti ceni kot je subvencionirana enota, vendar brez papirologije, birokracije ali dolgoročnih obveznosti iz razpisov.
Vzdrževanje: Redno servisirano s strani strokovne tehnične ekipe Dimpex.
Zmogljivost: Visokospecifikacijska različica »Multi« za raznovrstne proizvodne potrebe.
Prosimo, samo resni kupci.
Itsdpfsygrghsx Ab Ajg
Mali oglas
Nemčija
394 km
Tračni brusilnik Ligmet PBK 2501
LigmetPBK 2501
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, Rabljeni stroj
Leto izdelave: 1999
Oprema in tehnični podatki:
Možnost uporabe kot stroj za brušenje površin in robov
Itsdpfx Aboy Siz Uj Ajg
Velikost mize: pribl. 2500 mm
Teža: pribl. 490 kg
Razpoložljivost: takoj
Lokacija skladišča: 63934 Röllbach
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Nattheim
457 km
Stroj za oblaganje robov
Holz Her1310-1
Pokliči
Stanje: rabljeno, Leto izdelave: 2001, Debelina obdelovanca min./maks.: 6/45 mm Debelina nalimka: 0,4 - 3 mm Največja višina nalimka: 51 mm Najmanjša dolžina trakovega nalimka: 350 mm Največji previs nalimka v višino na stran: 3 mm Najmanjša širina obdelovanca: 60 mm Najmanjša dolžina obdelovanca: 180 mm Skupna dolžina: 3700 mm Širina: 1440 mm Največja višina: 1970 mm Višina vstopa obdelovanca: 850 mm Teža: ca. 850 kg
Skladiščno mesto: pri dobavitelju
Itsdey Dd Iyspfx Ab Ajg
Mali oglas
Tata
301 km
Stroj za obdelavo robov stekla Adelio Lattuada
Adelio LattuadaAL.5E
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 589-03, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 8,5 kW (11,56 KM), pritisk: 6 letvica, leto zadnje generalne obnove: 2024, Stroj za brušenje in poliranje stekla s 5 koluti. V normalnem, delujočem stanju. 5 kolutov. Debelina 4–25 mm. Minimalne dimenzije 80x150 mm. Hitrost 0,5-4 m/min. Napajanje: 400V.
Itedpfx Absy Sw Nge Aeg
Mali oglas
Sonnenbühl
507 km
Brusilnik orodja
Roll-o-Matic660 XW
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Rollomatic 660XW, letnik 2024, 6-osni CNC brusilni stroj za orodja:
Krmilnik: FANUC 30iMB
Menjalnik brusnih kolutov: 6-mestni
Premer orodja: Ø 0,1 – 12,7 mm
Iedpfx Asy S Uxrsb Ajtg
4 linearne osi + 2 rotacijski osi
Maks. moč brusne vretena: 14 kW
Hitrost vretena: 500 – 12.000 min⁻¹
Mere stroja: 1840 × 1560 × 2250 mm
Teža stroja: ca. 2.500 kg
Mali oglas
Teisendorf
253 km
Stroj za oblaganje robov
Hebrock - AltendorfF5
Pokliči
Stanje: novo, Leto izdelave: 2026, Hebrock - Altendorf Edge Banding Machine F5 next
- New machine, still in its original packaging, with complete equipment
- With PLC control including 15" touchscreen
- Edging material up to 3 mm
- Whispercut pre-milling unit including DIA-tool up to 2 mm
- Coated, maintenance-free glue pot, PU quick-change pot
- Including glue runoff device (downwards)
- HF milling station with pneumatic milling adjustment
- Corner rounding unit
- Radius scraper blade
- Surface scraper blade including pneumatic lifting device
- Buffing station
- Combination milling head
- Radius milling head R=2mm
- Radius corner milling head R=2mm
- Quick-change device for corner milling head
Iodjy Iw Nrjpfx Ab Aotg
- Additional exchange motor for corner milling head with tool assembly
- Radius exchange motor R=1mm
- Ball bearings 24.1 and 24.2 mm
- Multi-radius scraper R1/R2
- Chassis
- Additional exchange glue pot including stand
- PUR separation agent spraying unit
- PUR cleaning agent spraying unit
- Edge spraying unit for PUR/foil
- Nesting for milling and radius scraper blade
- Pneumatic 3-point adjustment (radius, chamfer, flush milling)
- Pre-milling up to 50mm workpiece thickness
- LED lighting in interior compartment
- Workpiece thickness 8-50mm
- Minimum workpiece length approx. 160mm
- Feed rate approx. 10m/min
- Dimensions (LxWxH): 4.40 x 1.10 x 1.55m
- Weight: gross 990 kg, net 930 kg
- Extraction port 1 x 140mm
Delivery and commissioning available
Olajšamo vam iskanje: "stefani obojestranski brusilnik robov"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec









































































































































































































