Rezalniki Za Tla nakup rabljenega (86.014)

Stanje: novo, Our SAPI pressure blasting unit, type 'Mammut', with a 60-litre vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. A water separator is also permanently installed on the blasting unit; this removes moisture from the compressed air and prevents the blast media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This initiates and stops the blasting process by actuating the hand lever mounted on the blast hose. The scope of delivery includes: - SAPI pressure blasting unit 'Mammut 60 L' - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off Technical data - Pressure Blasting Unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed piping 1" internal and external - Rubber-coated metal nozzle with rubber seal - Large maintenance opening - Chassis with rubber wheels - Media dosing valve (suitable for all common blasting media) - Tank capacity 60 l - Total height 1,130 mm - Tank diameter 360 mm - Overall diameter 700 mm - Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest on/off times, fully compliant with occupational safety guidelines (VBG 48) - The pressure setting can be precisely adjusted prior to operation: continuously adjustable from 0.1 to 12.0 bar - Reduced abrasive consumption as the pressure vessel remains under pressure, preventing unnecessary discharge of media - Upon restarting, full blast pressure is immediately available at the nozzle, eliminating build-up time—thus, significant reduction in both media consumption and wear on the blast hose - No moisture (condensate) forms inside the vessel, as it remains pressurised at all times and is not vented with each start/stop. Additional benefits include: Iodpfx Aowc Afhsb Aotg - Optimum media dosing via hardened precision valve - Lower compressed air requirement, significantly reducing fuel (diesel) consumption - One-person operation, as vessel pressure is constantly indicated and can be adjusted via the pressure gauge without needing to start the device first - No sensitive components such as control valves, membranes or gaskets—resulting in low maintenance and reliable operation. Only the blast hose within the safety shut-off needs to be checked and replaced if necessary.

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), A complete and automated OMAG paving stone production line is available. Components: 1) Pull plate for colormix in the face mix hopper. 2) Inline washing unit. 3) Dry side by Rekers. 4) Handling by Rekers. 5) Control system by Rekers. 6) Fork carriage by Rekers. 7) Part of the drying chamber racks, as they serve as load-bearing structures for the building. 8) Board crane for buffer loading and empty boards. 9) Horizontal strapping system by Cyklop. Without plank conveyor and boards. Concrete supply: 2-axis skip, capacity with 90x90 paving stones: 1000-1100 per shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Complete new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Itedpfx Aov Nn Hxeb Aeg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Itodpfx Asucfwpjb Aeg

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Used stainless steel pressure vessels by STAWAG, 100 L (suitable, for example, for brewery applications: kegs, beer barrels). 3 units available Itsdpfxsdyqacj Ab Asg Year of manufacture: 1987 Manufacturer: STAWAG Usable volume: 100 L Overall dimensions (Ø x H): 400 x 950 mm Test pressure: 4.5 bar Operating pressure: 3 bar Operating temperature: 130 °C Condition: very good.

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Ijdpfx Absiu Smbe Aotg Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: novo, Leto izdelave: 2018, Crucible capacity: 420 kg As-new and unused industrial furnace for DAW20A or DAW20S. The furnace from Metec, model Z20/120C, features a durable stainless steel crucible. Crucible capacity is 420 kg, melting capacity per hour is 120 kg/h at a connected load of 21.5 kW. A suitable control cabinet can be custom-built upon request. Itsdpstv Rlzefx Ab Aog

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch Itodpfjx Hp E Aex Ab Ajg 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Iodpfx Ajvxlufsb Astg Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 2007, used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Includes spray and blow bar (SR system with adjustable nozzles) and stand Itodpfx Aotwfkneb Ajg Connection: 24-pin plug Traverse module: 400 mm stroke

Stanje: novo, Leto izdelave: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection piston diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 bar Corresponding parting plane: 226, 274, 326 cm² Ejection stroke: 220 mm Machine Features: 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side (left) 1.4.0 Machine mounts 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill injection system 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop in return stroke 3.5.2 Electric nozzle and shot chamber heating 3.5.3 Plug-in connectors for electric nozzle and shot chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 DATADIALOG–RC machine control 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on swing arm Itodpfx Absr Hwf Ao Asg 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.3 Spray rail CR 275

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Itsdpfx Abetuxmyo Aeg Tie bar diameter: 56 mm Die casting force: 55 kN Die casting stroke: 130 mm Plunger diameter: 45, 50, 55 mm Casting volume (DIN 24480): 76, 121, 165 cm² Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: rabljeno, Leto izdelave: 2008, Overview  This complete PET water bottling line was predominantly manufactured in 2006 by renowned European companies such as Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino, and Atlanta. The line will remain operational until the end of June 2025, providing prospective buyers the opportunity to observe it running under production conditions. All equipment is in excellent working condition, accompanied by a complete service history, making this a turnkey solution that is immediately ready for production. Technical Data - Capacity: Up to 6,800 bottles/hour for 0.5L bottles, up to 6,000 bottles/hour for 1.5L bottles - Formats: 500ml PET, 1500ml PET - Bottle neck finish: 30/25 - Packaging: • 500ml bottles: 24-pack shrink-wrap • 1.5L bottles: 6-pack shrink-wrap Isdewz H Ahepfx Ab Aotg - Bottle dimensions: • 0.5L: 203mm diameter • 1.5L: 317mm diameter - Condition: Very good, complete maintenance records available Scope of Supply - Blow moulder: Siapi EA4 | 2008 - Filling machine: Melegari S.p.A Fill Jet 20/20/4 | 2001 - Labeller: P.E Srl 8T.540.1S.1E | 2002 - Shrink tunnel: k Tunnel 70S | 2007 - Shrink packer: k Nice Wrap35 SFUSO | 2008 - Carry handle applicator: Comag H 40/1 | 2008 - Palletizer: TMG - Inkjet printer: Domino A200 - Pallet wrapper: Atlanta Mytho A | 2009

Stanje: rabljeno, Leto izdelave: 2015, Overview: The tray packer was built in 2015 by the Italian manufacturer Atlanta. The machine is in good condition, has already been professionally dismantled, and is in storage. Technical Details Capacity: 15 trays per minute Iodpfxjrkgzks Ab Astg Specifications: - Currently configured for single-lane infeed - Complete set of new parts for dual-lane infeed included - For carton thickness: 2 to 5 mm - Flap closes from underneath Current configuration: for PET bottles 0.25L & 0.50L - 4 packs/tray in 3x4 arrangement for 0.25L bottles - 4 packs/tray in 2x3 arrangement for 0.50L bottles - For cartons, either plain or printed Machine control: Siemens S7 touchscreen The machine is equipped with infeed and outfeed conveyors.

Stanje: rabljeno, Leto izdelave: 2009, Overview This complete compressed air system was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The system comprises two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD refrigerant dryer, and one Donaldson UFA-AC0016 oil separator. Designed for reliable and energy-efficient air supply with up to 8.5 bar, this system is ideal for continuous production environments. The system has been regularly serviced, with the most recent comprehensive maintenance completed in August 2025, and is in good operating condition. The entire installation remains connected and operational and is available immediately for inspection and sale. Technical specifications - Year of manufacture: 2009 - 2013 - Application: Industrial compressed air system - Total capacity: 2 × 24.1 m³/min - Maximum pressure: 8.5 bar - Power consumption: 274.8 kW Scope of supply - Compressor | Atlas Copco | GA132 VSD | 2013 Iedpfsxrc Acjx Ab Astg - Compressor | Atlas Copco | GA132 VSD | 2012 - Refrigerant dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), 2 kosa centrifugalnih črpalk Sulzer MB 80-230/3 Pretok: 79-89 m³/h Itjdpfxod Sybuj Ab Ajg Dvižna višina: 240-230 m Maks. temperatura: 130°C Tesnilo: drsno tesnilo z priključkom za zaporno vodo Pogon: Siemens 90 kW Hitrost: 2980 obr./min ! Cena na kos !

Stanje: rabljeno, Rezervoar za stisnjen zrak, tlačna posoda KAESER Tovarniška št.: 481127K Leto izdelave: 2001 Prostornina rezervoarja: 1000 litrov Obratovalni tlak: 11 barov - Tlačna posoda vroče cinkana - 3 priključne spojke z navojem 2" - 2 priključni spojki z navojem 1 1/2" - 3 priključne spojke z navojem 1/2" - 2 majhni čistilni odprtini - 3 krogelni ventili - 1 varnostni ventil - Manometer za tlak - 2 žerjavna ušesa na vrhu rezervoarja Premer rezervoarja: cca 800 mm Skupna višina: 2300 mm z nosilcem (brez priključkov) Teža: 230 kg Dobro ohranjen Iodjxpqzuopfx Ab Aotg

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm - Rezkanje radija: R2 - Radijska strgala - Površinska strgala - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min Ijdpoxymfwefx Ab Aetg - Priključek za odsesavanje: 160 mm Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Razpoložljivost: takoj Skladiščna lokacija: Baden-Württemberg

Stanje: novo, Storage box for carbide-tipped saw blades made of Trespa, white Ijdpfsnvkhhox Ab Aotg 15 compartments for saw blades up to a maximum diameter of 400 mm with recessed grips for easy insertion/removal of saw blades Dimensions (L x W x H): approx. 500 x 430 x 460 mm Availability: short-term Location: Hochheim

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Visokotlačna črpalka z vodnega rezalnika PTV WJ3030B-1Z. Črpalka, reduktor, glavni motor 37 kW in splakovalni ventil so bili obnovljeni. Ojačevalnik H2O Jet 60K 301001-1-R. Itsdpfx Aeyxmmzeb Aog

Stanje: zelo dobro (rabljeno), Oprema: Na voljo je tipska ploščica,

Stanje: novo, Tanos Systainer Iodpsw Upnlsfx Ab Ajtg - 118 kosov - potiskano z napisom Festo - približne mere - Zunanja mera V 112 x Š 396 x G 296 mm - Notranja mera V 71 x Š 389,5 x G 275 mm - Možna dostava z doplačilom

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg Ijdpfx Ajhcnhmsb Ajtg

Stanje: dober (rabljeno), Leto izdelave: 2013, številka stroja/vozila: 136149500092-0273, Offer 24109 Technical data: Itjdpfxstwnlhe Ab Aeg - 4 storage spaces for 50L cylinders - Continuous cylinder holder - Exhaust vent - Cabinet is lockable, key included - Required space: W 1400 x D 465 x H 2150 mm - Weight approx. 120 kg

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: XXXX, Ref. No. 21392 Technical Data (approx.): - Total load capacity (powered + idler unit): 25,000 kg - Load capacity per container device: 12,500 kg - Workpiece diameter approx.: 500 - 4,000 mm - Center distance of support rollers: Adjustable - Roller diameter: 400 mm - Roller width: 120 mm - Continuously variable rotation speed - Hand-held remote control for forward and reverse operation - Drive: 400 V - Space requirement, powered unit approx.: W 3500 x H 850 x D 1000 mm Iedpfx Abok Eatds Ajtg - Space requirement, idler unit approx.: W 2700 x H 850 x D 800 mm - Weight, powered unit: approx. 1,300 kg - Weight, idler unit: approx. 900 kg

Stanje: dober (rabljeno), Offer 23501 Gas Receiving Unit with Pressure Reducer + Separator Itedpfxerf Uqzj Ab Aog Technical specifications (approx.): - Gas receiving unit suitable for nitrogen, argon, forming gas, hydrogen - From plasma cutting system + oxy-fuel cutting system, Manufacturer: ESAB - Mounted on stainless steel sheet as shown - Various pressure reducers and separators included - Weight approx. 80 kg - Installation footprint approx.: W 1.6 x H 1.5 x D 0.2 m