Renishaw Ph10Mq nakup rabljenega (597)

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 48.804 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik 840D, skupna dolžina: 7.000 mm, skupna širina: 5.000 mm, širina mize: 400 mm, dolžina mize: 500 mm, največja hitrost vretena: 8.000 obr/min, delovne ure vretena: 23.574 h, dovod hladilne tekočine: 50 letvica, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been regularly serviced, is immediately ready for operation, and comes with a pallet changer and comprehensive accessories. Ideal for tool and mold making as well as series production. Technical Specifications - Travel paths: X 600 mm / Y 560 mm / Z 560 mm - B-axis: 360° x 0.001° (60 rpm) - Spindle speed: 0 – 8000 rpm (stepless) Nsdpsx Icyvefx Abiewl - Control: Siemens Sinumerik 840D - Table size: 6 pallets, each 500 x 400 mm - Table load capacity: 350 kg - Working feed: 1 – 60,000 mm/min - Rapid traverse: 60 m/min Tool & Magazine - Tool holder: DIN 69871-SK40 - Chain magazine with 90 slots - Max. tool diameter: 80 mm - Max. tool length: 350 mm - Max. tool weight: 10 kg - Max. total magazine weight: 450 kg - Tool change time: 5 sec - Pallet change time: 6 sec Machine Requirements & Dimensions - Motor power: 13 kW / 20 kW - Torque: 124 / 191 Nm - Total power consumption: 20 kW - Machine weight: approx. 16,000 kg - Floor space required (LxW): 7 x 5 m Equipment & Accessories - Coolant system approx. 1,100 L (internal & external) - Knoll cooling unit with drum filter (30/40/50 bar via M command) - Chip conveyor - Tool measurement: Renishaw probe - Tool breakage monitoring in working area - Pallet storage (4 positions) - Pallet-sequence operation - Fully enclosed working area according to safety regulations (UVV) - Network capability - Technical documentation & installation plan available Components Renewed - Motor & pump of the hydraulic system replaced - Some hydraulic and pneumatic hoses replaced - Switch cabinet LT module replaced - Drum of the Knoll unit replaced Operating Hours - Power-on hours: approx. 48,804 h The counter runs as soon as the machine is switched on – including setup, maintenance, or idle periods. - Spindle run time: total 23,574 h Special features - Machine under power, immediately ready for use - Inspection possible at any time by appointment - No dealer sale – machine comes directly from production - Technically checked, no known defects - Support with dismantling, loading, and transport possible (at extra cost) All information provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15995729164, hitrost vretena (min.): 24.000 obr/min, potovalna razdalja osi X: 700 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, skupna masa: 3.400 kg, proizvajalec krmilnikov: Siemens, model krmilnika: 840D, dolžina obdelovanca (maks.): 2.340 mm, širina obdelovanca (maks.): 1.650 mm, višina obdelovanca (maks.): 2.500 mm, 2013, DMG Mill Tap 700, izdelano v Nemčiji. Opremljeno z naslednjimi funkcijami: Vreteno, 24.000 vrt/min, 25 mest za orodje, Nsdpfxszmggns Abijwl (5. os) LEHMANN EA-507, CNC vrtljiva miza, Proizvodni paket TSC, 20 bar, transportni sistem za струžine, Renishaw tipalo OMP 60 + sistem za nastavitev orodja OTS, Glavno vreteno potrebuje popravilo. Tehnične specifikacije: Leto izdelave: 2013 Nadzorna enota: Siemens 840D, različica Solution line Hod osi X: 700 mm Hod osi Y: 420 mm Hod osi Z: 380 mm Velikost mize: 840 x 420 mm (maksimalna obremenitev: 400 kg) Stožčasta povezava vretena: BT 30 / BBT 30, hitrost vretena: 24.000 vrt/min Menjalnik orodja (ATC): sistem z 25 mesti Hitri premik (X/Y/Z): 60 / 60 / 60 m/min Teža stroja: približno 3.400 kg Zunanje mere: 1.650 x 2.340 x 2.500 mm Priložena dodatna oprema / oprema: pL LEHMANN EA-507, CNC vrtljiva miza (5. os) s popolno napeljavo/integracijo.

Stanje: rabljeno, Leto izdelave: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of manufacture: 2003) in well-maintained and fully functional condition. Nwjdey Dcivjpfx Abiol The machine features a robust granite construction combined with air bearings for its guideways. This design ensures that the bridge and axes move smoothly and almost frictionlessly over the granite, providing a proven basis for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance and series production, consistently delivering stable measurement results during ongoing operations. Prior to delivery, the machine is thoroughly inspected and test-run by our service engineers in Remscheid, ensuring full functionality. The system is currently powered on and can be inspected and demonstrated at any time. PC System (modernized): - After purchase, a completely new PC system that meets current WENZEL requirements will be installed. This system is up to date and will be thoroughly tested before the machine is finalized for the purchaser. Optional services (upon request) - Installation and commissioning of the measuring machine within North Rhine-Westphalia (NRW) - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution according to DIN EN ISO 10360-2:2010-06 - Maximum spatial diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including documentation - DAkkS calibration by accredited Klostermann Calibration Laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measurement software - Contract programming for your components Additional information: Upon request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service options and hardware, resulting in a corresponding adjustment of the above-mentioned purchase price. Additional software modules, customizations, as well as individual accessories and clamping systems are available upon request—optimally tailored to your specific measuring requirements. Measuring range X: 500 mm Measuring range Y: 1,000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2.5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC system: Windows 11 (current configuration) Touch trigger system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module Articulating head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Change rack: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: Provided on loan

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V374C0020, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, nazivna (navidezna) moč: 31 kVA, vrtilni moment: 197 Nm, proizvajalec krmilnikov: Heidenhein, model krmilnika: iTNC 530, teža obdelovanca (maks.): 3.000 kg, širina mize: 1.000 mm, dolžina mize: 1.200 mm, obremenitev mize: 3.000 kg, vrtljajska hitrost (min.): 15.000 obr/min, največja hitrost vrtenja: 18.000 obr/min, delovne ure vretena: 1 h, število vreten: 1, število mest v zalogovniku orodij: 40, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Machining Centre – ZPS MCV 1220 – 5-Axis – 2018 Manufacturer: ZPS Model: MCV 1220 Year of manufacture: 2018 Nwjdpfxeymmd Uj Abijl Condition: In production, fully operational Availability: Immediately Serial number: On request Machine location: Address visible Control CNC control: Heidenhain TNC 350 Number of axes: 5 Working Area X-axis travel: 1200 mm Y-axis travel: 800 mm Z-axis travel: 600 mm Table size: 1200 × 1000 mm Max. table load: 3000 kg Spindle Spindle speed: 18,000 rpm Spindle power: 31 kW Tool taper: HSK 63 Coolant through spindle: Yes Tool Changer Number of tool positions: 40 Type: Chain-type tool magazine Equipment Chip conveyor Through-spindle coolant Fully enclosed working area Electronic handwheel Renishaw measuring probe Machine documentation Important Information The machine is equipped with a fully refurbished CYTEC angle head with 0 working hours. Linear guides and carriages have been refurbished. Complete machine geometry has been re-measured and adjusted. The machine is sold in working condition. Test run under power is possible at the seller’s facility prior to purchase. Disassembly and loading after payment to be organized by the buyer. Included in the price: tool holders, tools, and Renishaw probe. Dimensions & Weight On request

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.200 mm, največja hitrost vretena: 12.000 obr/min, skupna dolžina: 9.300 mm, skupna višina: 4.300 mm, širina mize: 1.250 mm, skupna širina: 6.900 mm, dolžina mize: 1.250 mm, skupna masa: 50.000 kg, 5-Axis Bed-Type Milling Machine AX5 TLF, 2009, Heidenhain iTNC530, Rotary Table, HSK-A100 Offer Description: For sale: AX5 TLF bed-type milling machine from 2009, featuring an integrated rotary table and fully programmable axes. This machine is designed for precise multi-axis machining, including complex parts requiring 5-axis operation. The construction includes a swivel head and rotary table, providing extensive technological capabilities for machining large workpieces. The machine is equipped with Heidenhain iTNC530i CNC control, a spindle with HSK-A100 taper, and through-spindle coolant. Additional features include a Renishaw workpiece probe and a 30-position tool magazine. For further information, photos, sales conditions, or to arrange an inspection, please contact us. Technical Specifications: Model: AX5 TLF Type: 5-axis bed-type milling machine Year of manufacture: 2009 Axis Travels: X-axis: 3200 mm Y-axis: 1200 mm Z-axis: 1200 mm B-axis (swivel head): ±95° C-axis (rotary table): 360° Rotary Table: Diameter: 1250 mm Spindle: Taper: HSK-A 100 Spindle speed: 12,000 rpm Through-spindle coolant Control: Heidenhain iTNC530i Additional Equipment: Nedpfx Aoyzfb Nsbiewl Renishaw workpiece probe Tool magazine: 30 positions Machine Dimensions: Length: 9300 mm Width: 6900 mm Height: 4300 mm Weight: 50,000 kg

Stanje: rabljeno, Leto izdelave: 2015, Maks. premer struženja 315 mm Premer vrtenja 315 mm Višina struženja 175 mm Krmilnik SIEMENS 840 D SL X-pomik 660 mm Z-pomik 300 mm Število vrtljajev 7500 obr/min Menjalnik orodij, 12 mest, VDI 40 Skupna priključna moč 36 kW Nwsdpfxjvxwrco Abiol Teža stroja ca. 7,5 t Dimenzije ca. 4,4 x 2,2 x 2,7 m Renishaw LP2H Transporter za ostružke Vpenjalna glava ni vključena Držala za orodje niso vključena Motorizirano orodje ni vključeno

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Ponujamo ročno 3D-koordinatno merilno napravo proizvajalca Mitutoyo. Merilno območje X/Y/Z: 500 mm/700 mm/400 mm, merilna miza: granit, površina za namestitev obdelovanca X/Y: 764 mm/1175 mm, maksimalna višina obdelovanca: 590 mm, maksimalna teža obdelovanca: 180 kg, sistem za merjenje dolžine: visoko natančni stekleni merilni trakovi, digitalni korak: 0,0005 mm, ločljivost sistema za merjenje dolžine: 0,0001 mm, odstopanje oblike posameznega tipala PForm, MPE: 6 µm, izmerjeno odstopanje oblike posameznega tipala: 5,15 µm, ponovljivost R0: 9,70 µm, vodila: zračno ležaje v vseh osi, fiksacija osi: pnevmatična, sistem tipala: Renishaw MH20i. Dimenzije stroja X/Y/Z: približno 1122 mm/1434 mm/2267 mm, teža: približno 646 kg. Stroj je bil kalibriran s strani podjetja Mitutoyo 10. 3. 2026. Dokumentacija je na voljo. Možna je ogled stroja na kraju samem. Nodpfx Abeztdt Sjiewl

Stanje: dober (rabljeno), Leto izdelave: 2015, C 22 U + manipulacijski sistem IH 30 + Dodatni zalogovnik ZM 192 Parametri stroja: Pomiki v oseh X,Y,Z: 450, 600, 330 mm Maksimalno št. vrtljajev vretena: 18000 HSK-A63 1/min. Opis: Stroj je v dobrem tehničnem stanju, ob predhodnem dogovoru je možen preizkus. Oprema KinematicOpt, centralno hlajenje 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Cena novega je bila približno 570.000 EUR. K stroju imamo tudi popolno specifikacijo dobavljenih komponent in opcij – pošljemo na zahtevo. Nwedpfx Aboy Rgfzeisl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 685 mm, pomik po osi Z: 630 mm, model krmilnika: Siemens 840D, največja hitrost vrtenja: 20.000 obr/min, The machine spindle was replaced in 2022! The original price of the machine was €600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse in all axes: 40 m/min Axis acceleration: 0.25 g Maximum spindle speed: 20,000 rpm Maximum rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Nwsdsymnykepfx Abiel Control unit: Siemens 840D EQUIPMENT Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Fixed table with integrated rotary table Kessler milling/rotary table DTE 520 NC swivel head with spindle housing Direct path measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip spray gun Coolant recirculation unit Additional pan rinsing Machine prepped for air through the spindle Work area extraction system Safety package MILL 2000: reinforced enclosure with safety glass Zero-point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Renishaw OMP 40-2LS probe Rotating sight glass Chiron Power Service Siemens CNC control with OP019 operator panel, 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in a networked environment Siemens tool life monitoring Probing in JOG (zero-point determination during setup in jog mode) Load and unload station for tools enabling main time parallel tool change at the background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.000 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 800 mm, Aberlink koordinatni merilni stroj Zenith II Merilna območja: 1000 x 2000 x 800 mm Merilna negotovost: 3,8 +4L/1000 Merilna sonda Renishaw PH10M s TP200 in izmenjevalcem SCR200 Nwjdpfx Absy Hcb Reiel Po želji kamera enota, ročna menjava (+ 3.500 €) Merilna programska oprema Aberlink 3D, aktualna verzija, PC z Win 10 Opcijsko s programsko opremo CMM Manager Po dogovoru možna namestitev in usposabljanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 5.303 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5847, potovalna razdalja osi X: 600 mm, pomik osi Y: 580 mm, pomik po osi Z: 360 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 42.000 obr/min, hitrost vretena (min.): 5 obr/min, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, širina mize: 550 mm, dolžina mize: 450 mm, vrsta vhodnega toka: trifazni, obremenitev mize: 350 kg, skupna masa: 5.500 kg, teža obdelovanca (maks.): 350 kg, vhodna frekvenca: 50 Hz, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNCi530i, delovne ure vretena: 5.303 h, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Fraiseuse grande vitesse HSC500/3 HSC500 – 3 axes Entretien annuel effectué Heures de fonctionnement broche HVC140 : 5 303 h Course X/Y/Z : 700/590 × 580 × 360 mm Surface d’usinage effective : 580 × 530 mm Surface de la table : 550 × 450 mm Poids pièce max. : 350 kg Distance plateau-machine – nez de broche : 160/520 mm Dimensions machine (L × P × H) : 3 200 × 2 250 × 3 000 mm Avance rapide : 30 m/min Équipement : – Commande Heidenhain iTNC530i – Préparation pour aspiration des poussières – Changeur d’outils 60 positions, HSK40 – Lubrification quantité minimale (MQL) – Buse d’air réglable – Mesure de longueur d’outil par laser Blum – Palpeur de mesure pièce Renishaw OMP-400 – Éclairage supplémentaire Nodpfx Aey R U Azobijwl – Volant électronique avec touche de validation – Broche de fraisage StepTec HVC140-15/42 42 000 tr/min, 5 303 h de fonctionnement – MMS Lubtools – Système de refroidissement 3 kW – Porte de chargement côté arrière – Compensation de longueur et de température pour le pack précision Garantie : 3 mois (hors broche de fraisage) Transport, mise en service et formation disponibles Options sur demande

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, model krmilnika: Siemens 828D, največja hitrost vretena: 12.000 obr/min, The spindle of the machine was replaced in 2022! TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control: Siemens 828D Working hours Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT Active air-to-air electrical cabinet cooler Network connection USB port Spindle cooler Side windows left and right for large components Safety cabin with armored glass Coolant pump at the spindle Pump for the chip flushing device Air at spindle via M-function Operating status signal light Oil separator Electronic handwheel IKZ system (internal coolant supply) Pump for internal coolant supply Nodoyf E Szspfx Abijwl 24-position tool changer Hinged belt chip conveyor (rear discharge) Glass scales incl. sealing air from Siemens Wireless workpiece measurement system Renishaw OMP60 Tool measuring system Renishaw NC4 Automatic machine door Note: The Halter automation unit as well as the vices including the zero-point clamping system are not included in the scope of sale or delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, - RABLJENO - 5-OSNI HORIZONTALNI OBDELOVALNI CENTER Z VEČPALETNIM SISTEMOM POMIK V OSI X: 2000 mm POMIK V OSI Y: 1600 mm Nwsdpfxoyry Rle Abijl POMIK V OSI Z: 1800 mm VRETENO: 4000 vrt/min; 37 kW; 794 Nm; BIG PLUS ISO 50 PALETA: št. 4; 1000 x 1000 mm NAJVEČJA DOVOLJENA OBREMENITEV: 3000 kg MAKS. OBDELJIVA VELIKOST KOSA: ø 1550 mm HLADILNA TEKOČINA POD VISOKIM TLAKOM: 30 bar MENJALNIK ORODJA: VERIŽNI TIP; 306 pozicij MAKS. TEŽA ORODJA: 35 kg GLAVA: AVTOMATSKA 1° ROTACIJSKA GLAVA KRMLJENJE: SIEMENS 840 D DODATNA OPREMA: TRANSPORTER OSTRUŽKOV; LINEARNE MERILNE LETVE; MERILNA SONDÁ RENISHAW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 259-45, potovalna razdalja osi X: 800 mm, pomik osi Y: 550 mm, pomik po osi Z: 550 mm, model krmilnika: Siemens 840 D, največja hitrost vretena: 12.000 obr/min, Na isti lokaciji se draži tudi naslednja avtomatizacija: System 3R Workpartner (ID iskanja: 21119877) System 3R Workpal 1 (ID iskanja: 21119737) System 3R Transformer Workmaster (ID iskanja: 21119557) TEHNIČNE PODROBNOSTI Pomik po X-osi: 800 mm Pomik po Y-osi: 550 mm Pomik po Z-osi: 550 mm Vpenjalni sistem orodja: HSK 63 Hitrost vretena: 12.000 obr/min Število mest za orodja: 65 Nwsdpeyfum Ujfx Abijl PODATKI O STROJU Krmiljenje: Siemens 840 D Delovne ure vretena: ca. 16.000 h OPREMA Transporter za odrezke Knoll Papirni tračni filter Knoll Laserski merilni sistem Blum LaserControl Digitalna 3D merilna tipala Renishaw Avtomatizacijski vmesnik Avtomatska vrata Odvajanje oljne megle Notranje hlajenje s hladilno tekočino

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 4.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1084327, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 10.000 obr/min, Oprema: transportni trak za ostružke, Na isti lokaciji se draži tudi naslednja avtomatizacija: System 3R Workpartner (iskalni ID: 21119877) System 3R Workpal 1 (iskalni ID: 21119737) System 3R Transformer Workmaster (iskalni ID: 21119557) TEHNIČNI PODATKI Pomik X-os: 1.016 mm Pomik Y-os: 508 mm Pomik Z-os: 635 mm Hitrost vretena: 10.000 vrt/min Število orodnih mest: 40 Vpenjanje orodij: BT 40 PODROBNOSTI STROJA Krmiljenje: Haas Delovne ure vretena: cca 4.500 h OPREMA Transporter za odrezke Kaljena vpenjalna plošča, 20-M10 Merjenje orodja / Kontrola loma orodja Digitalna 3D-merilna sonda Renishaw Vmesnik za avtomatizacijo Nwodpfxjyfuq Te Abiel Samodejna stranska vrata Odsesavanje oljne megle Notranji dovod hladilne tekočine

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 23.000 h, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 950 mm, pomik po osi Z: 1.000 mm, model krmilnika: OSP-E100M, največja hitrost vretena: 10.000 obr/min, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the deadline, by the end of calendar week 26, 2026! TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 950 mm Travel Z-axis: 1,000 mm Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm NCB B-axis: 0.001 degrees MACHINE DETAILS Control: OSP-E100M Nwjdpfx Abezbamfeiol Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Cutting hours: approx. 23,000 h EQUIPMENT 2 APC pallet changer system 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Concept Renishaw preparation (receiver) Tool breakage monitoring system integrated in the magazine (special development) An optional tool package with 230 tools is available for €5,000. The seller can offer disassembly, transport securing, removal & loading at an additional cost of €7,850.

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: 107.32.99.158, potovalna razdalja osi X: 530 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, model krmilnika: Heidenhain iTNC 530, največja hitrost vretena: 12.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Vreteno stroja je bilo zamenjano julija 2025! TEHNIČNI PODATKI Pomik X-os: 530 mm Pomik Y-os: 450 mm Pomik Z-os: 450 mm Rotacijska nagibna miza Premer mize: 400 mm Obremenitev mize: 200 kg Kot nagiba: stopinje Hitrost nagibanja: 20 obr/min Hitrost vrtenja: 30 obr/min Vpenjalni stožec: SK40 Maks. hitrost: 12.000 obr/min Priporočen maksimalni delovni podajalni hod: 15 m/min Hitrost hitrega premika: 22 m/min Podajalna sila X in Y/Z: 5.000 N Število mest v magazinu: 30 Največji premer orodja: 90 mm Največja dolžina orodja: 250 mm (ročno 350 mm) Največja teža orodja: 6 kg DETALJI STROJA Krmilje: Heidenhain iTNC 530 z digitalno regulacijo Natančnost pozicioniranja po DIN/ISO 230-2/97: 0,008 mm Teža stroja: 6.500 kg OPREMA RENISHAW MP 12 merilna tipala Blum sistem za spremljanje orodij Nedpfxjzara Uo Abiewl

Stanje: rabljeno, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. The device impresses with its precision, reliability, and versatility in industrial metrology. Features & Specifications: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capability (optical and tactile measurements possible) - Design with Moving-Bridge System (MB/Z) for high stability and flexibility - High precision when measuring complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The high-precision, tactilely triggered Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe exchange and precise measurements with long styli. Main features: - Strain gauge technology: Minimal deflections are detected with extreme accuracy – typical errors such as “lobing” are eliminated. - High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm - Fast probe exchange: Automatic probe module change with SCR200 change rack, no recalibration needed Nwodpfxjzii Dzo Abiel - Robust: Probe module life exceeds 10 million touches - Flexibility: Standard (SF) and low-force (LF) modules for sensitive materials - Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, Interface PI200 - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Probe styli: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of delivery: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probing system incl. probe modules - Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: dober (rabljeno), Leto izdelave: 2006, Horizontalni obdelovalni center Tip stroja: DMG DMC 100 H Krmilnik: Siemens 840D powerline + Shopmill Leto proizvodnje: 2006 TEHNIČNI PODATKI Pomiki X-os: 1.000 mm Y-os: 1.000 mm Z-os: 1.000 mm Območje vrtljajev: 8.000 min⁻¹ Prestavni stopnji: 2 Pogonska moč: 100/40% - 32/44 kW Navor: 100/40% - 827/1.241 Nm Orodni vpenjalni konus: HSK 100 Število orodij: 270 Število palet: 2 Velikost palete: 800 x 800 mm B-os: 0,001° Oprema in značilnosti Elektronski ročni kolesček Delovni način: 4 Odsesavanje oljne megle Nwedpfx Aboziy Dljiol Notranje hlajenje (IKZ): 40 bar Papirni tračni filter Merilna tipala: Renishaw OMP 60 Pištola za spiranje ostružkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 44.673 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 900 mm, pomik po osi Z: 900 mm, model krmilnika: OSP-E100M, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 320, Brez minimalne cene – zagotovljeno prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Hod osi X: 1.000 mm Hod osi Y: 900 mm Hod osi Z: 900 mm Število vrtljajev vretena: 12.000 vrt/min Vpenjalno orodje: BT50 Število mest za orodja: 320 Število mest za orodja s premerom 600 mm: 80 Natančnost obdelave: 0,001° PODROBNOSTI O STROJU Nadzorna enota: OSP-E100M Število osi: 4 Tlak hladilnega medija: 30 bar Dimenzije in teža Stroj: 4800 x 2980 x 3150 – 21,5 t Magazin za orodja: 4500 x 2800 x 3150 – 6–7 t Transportni sistem za odpadke: 4500 x 1600 x 2400 – 2 t, vključno s črpalko za visok tlak Skladišče orodij: 3000 x 1200 x 1500 mm, 0–0,5 t Delovni čas Čas NC cikla: 71.235 ur Čas delovanja vretena: 56.241 ur Čas obdelave: 44.673 ur OPREMA ATC s 320 mesti 80 mest za orodja s premerom 600 mm 2 paleti Sistem za pisanje/branje Balluff NC miza Absolutni merilni sistemi v osi X, Y in Z Merilni tipalo Renishaw MP10 Nadzor za odkrivanje zloma orodja Sistem za nadzor orodja MOP Sistem za hlajenje s tlakom 30 bar Transportni sistem za odpadke Mayfran Consep 2000 Nwsdozlg U Aspfx Abiel

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), število osi: 3, This 3-axis OGP SmartScope Vantage 450 was manufactured in 2016. It features a travel range of 450 x 450 x 250 mm and is equipped with a Renishaw SP25M scanning probe kit and a Telestar Plus TTL laser sensor. The machine is supplied with a 24" LCD monitor and assorted accessories to enhance its functionality. If you are looking for top-quality optical measurement capabilities, we recommend considering the OGP SmartScope Vantage 450 we currently have for sale. Please contact us for further information. • Travel range (X/Y/Z): 450 x 450 x 250 mm • Software: MeasureMind 3D Multisensor; ZONE3 (CAD-based) • Probe system: Renishaw SP25M scanning probe kit • Sensor: Telestar Plus TTL laser sensor • Power supply: 230 VAC, 50/60 Hz, 4.0 A • Operating system: Windows 7 (upgradeable to Windows 10) Additional equipment: • 24" LCD monitors (x4) • Adapter for scanning probe • Sonic SD electronics • Kinematics for probe changer rack • Laser calibration artifact • Offline PC (ZONE3) Nwedsy Ry Iiopfx Abisl • Standard table (1000 x 800 x 750 mm) • Dust cover

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11160000593, potovalna razdalja osi X: 600 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 18.000 obr/min, premer mize: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 T-slot spacing: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate cross: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Nwedpfsyhnxvsx Abijl Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45° / -30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with free adjacent stations: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Connection: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB (A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of toolholders SK 40 approx.: 150 pcs High-pressure coolant unit 40 bar Through-spindle coolant supply (IKZ) Renishaw tool probe Work area lighting Rotating inspection window Electrical cabinet air conditioning unit

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 11.870 h, Funkcionalnost: popolnoma funkcionalen, Krmiljenje WINMAX DSM (dva zaslona) Dimenzije mize 1020 x 510 mm Največja obremenitev mize 1350 kg X-hod 762 mm Y-hod 510 mm Z-hod 610 mm A-os -35/+110 stopinj C-os 0 - 360 stopinj Hitrost vrtenja 12.000 vrt/min Vpenjalni stožec SK40 Pogon 11/15 kW Teža 4.900 kg Dimenzije D x Š x V = 2300 x 2400 x 2600 mm Pribor, oprema: - KITAGAWA TT251 NC vrtljiva miza - Naprava za hlajenje - Notranje hlajenje z 20 bari Nwodpfxoy U Hvhj Abiol - Hladilnik vretena - RENISHAW sistem za ničelno točko - Transporter za odrezke - Programske možnosti: 3D, DXF, žep s 'otokoma', sinhronizirano rezanje navojev, NCPP, ISNC, realistična simulacija, baza orodij in materialov itd. - Stroji noge - Hidravlična enota Stroj je še vedno pod napajanjem in ga je mogoče videti v obratovanju.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 925 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 600 mm, obremenitev mize: 600 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.000 W, število osi: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features an impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking for high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining center we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max. workpiece dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Distance between table and spindle: 60 - 660 mm • Rapid traverse (X/Y/Z): 50 m/min • Maximum feed rate: 50,000 mm/min Nwedpfoy Dc Nijx Abisl • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X-Y-Z optical scales • Operating hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-Axis Super-NURBS Kit, Centering Tool Programming, Tool Length Compensation, DNC-DT Interface, Tool Orientation Command Additional Equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration set • Coolant shower • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper size BT 50

Stanje: dober (rabljeno), Hexagon Type: Hexagon Optiv Performance 442 Product Description: The Optiv Performance 442 is a 3D multi-sensor coordinate measuring machine that combines optical and tactile measurement in a single system. The system supports multi-sensor measurement with vision sensor, tactile probe, TTL laser (Through-The-Lens), as well as the innovative Chromatic White Light Sensor (CWS). The base unit with vision sensor can be modularly upgraded with all available sensors. Applications: - For use on level surfaces - Versatile geometry measurements and GD&T analysis with standard accuracy Nwedpfx Aezgr R Eobisl Construction: • Vibration-dampening granite frame with fixed bridge and movable table • Integrated base with optional vibration dampers Guides: • Precision mechanical linear guides on all axes Drives: • DC servo motors with backlash-free ball screw drives located at the center of gravity Length Measuring System: • Incremental length measuring system Resolution: • 0.1 μm The Hexagon Optiv 442 multi-sensor measuring device is equipped with camera, laser, and Renishaw probing system. • Measuring range per single sensor: 410x410x200 mm • Dimensions: 1232x910x1663 mm • Weight: approx. 940 kg • Max. load (glass plate): 30 kg • Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) • Max. axis travel speed: 200 mm/s • Camera with 2-step zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine: HEXAGON Optiv 442 Electrical specs: Voltage: 115/230 V ±10% Frequency: 50/60 Hz ±5% Power consumption: 1000 VA Weight: approx. 1100 kg Condition: used Scope of delivery: (see picture) (Subject to technical data changes and errors!) If you have further questions, please feel free to contact us by phone.