Pekovska Peč Na Pelete Ali Drva nakup rabljenega (31.998)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution. Ljdpfx Aevz Hqtodlorl

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Lrsdpfx Asvz Hqmedljl Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Lrodsvz Hqgjpfx Adlel Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar Lrsdpfevz Hhxex Adljl - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 6.000 h, Funkcionalnost: popolnoma funkcionalen, The following is included: Lsdpfx Ajwlvhhedlorl - Hardening furnace (vacuum oil quenching furnace) - Control cabinet for the hardening furnace - Water tank (internal) with pump units and control box - Control box for water cooling - Pressure vessel for nitrogen (internal) - Platform for external cooling unit + connection points for nitrogen batteries (nitrogen battery containers are not included and must be rented) - 7 hardening baskets - Transport and loading trolley (red) - Parts cleaning basin for complete baskets with compressed air and drip tray -> The system has approx. 6000 operating hours -> The pictures are current, only the date on the image is incorrect

Stanje: rabljeno, Kovinska omara, delavniška omara, omara za zaklepanje Omara z 20 posameznimi zaklepnimi predali Širina: 1200 mm Globina: 520 mm Višina: 1850 mm Velikost predala (Š x G x V): 260 x 480 x 300 mm Lodpfx Ajx N Ikpodlerl Velikost predala v spodnji vrsti (Š x G x V): 260 x 480 x 280 mm - S ključavnico, vsak predal ima svoj ključ - Barva: srebrna Teža: 116 kg Dobro ohranjen

Stanje: zelo dobro (rabljeno), 2x Hahn+Kolb premični omari za orodje s 6 predali Cena velja za eno omaro za orodje! Obe skupaj staneta ustrezno 2400 € brez DDV. Rabljeno, a skoraj kot novo. Manjše sledi uporabe na delovni plošči, sicer popolnoma funkcionalno, vsaka z dvema ključema. Omara za orodje s 6 predali D x Š x V: 1025x705x930 mm Notranje mere predalov D x Š x V: 1x 880x590x240mm 5x 880x590x65mm Višina vključuje kolesa! Lredenucgxepfx Adlol Popolnoma funkcionalno. Možen osebni prevzem ali pošiljanje (preko špedicije).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Vacuum tempering furnace Manufacturer: BMI Year of manufacture: 2001 Maximum temperature: 750°C Year of manufacture: 2001 Batch size: L x W x H 1200 x 600 x 600 mm Heating type: Electric Ljdpfx Ajvcyf Tsdlorl Heating power: 100 kW

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Usable volume: 7.7 m³, max. temperature: 250°C, heating capacity: 54 kW, volumetric flow: 15 m³/min. Ljdoilhucepfx Adljrl

Stanje: dober (rabljeno), 724 RABLJENA Polnilna/polčna peč WP Matador MD 1125 s površino peke: 12,5 m². Plinski ali oljni gorilnik. ZUNANJE MERE (v cm): -širina: 183, -dolžina: 386, Lroderqikmepfx Adlol -višina: 252. MERE KOMORE (v cm): -širina: 120, -dolžina: 200. OPREMA: -plinski/oljni gorilnik, -5-komorni. Naprava se nahaja v našem skladišču (36-068 Bachórz, Poljska). Po dogovoru lahko nudimo obnovo, montažo in zagon. Navedena cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO.

Stanje: novo, Promess KA-EMF20/150 Servotiskalnica 20 kN Proizvajalec: Promess Tip: KA-EMF20/150 Vrsta: Servotiskalnica KN: 20 Stanje artikla: Novo Kalibrirano: Da Ojačevalnik DMS: BA 62601 Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Več novih in rabljenih servotiskalnic – najdete v naši trgovini! Lrodpjrgn N Ssfx Adljl Mednarodni stroški pošiljanja po dogovoru!

Stanje: dober (rabljeno), Plinska komorna peč Glasbeek Finish Tip 003.05 Glasbeek Finish Plinska komorna peč Lredpfx Adjd Spx Djlel Tip 003.05 Z vozičkom za nakladanje Najvišja temperatura 200 °C Približne notranje dimenzije (Š1900mm x G2950mm x V1800mm) Možno financiranje preko naše banke. komplett-konzept.leasingo.de Ostale nove in rabljene artikle najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Glasbeek Finish Plinska komorna peč Tip G.11.01 S vozičkom za nakladanje Maksimalna temperatura 200 °C Leto izdelave 1991 Lrodpfx Ajd Spxvsdljl 3 x 380 V 54 kW Približne notranje mere (Š1900mm x G2940mm x V1965mm) Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Mednarodne stroške dostave na zahtevo!

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7 Lodpfx Aog Dgymedlsrl

Stanje: novo, Električna komorna peč, proizvajalec VEI Tip: KO_EB Kroženje zraka: horizontalno usmerjanje zraka Maksimalna temperatura peči: 650°C Notranje dimenzije (Š x V x G): 800 x 800 x 1000 mm Ljdpoipvgiefx Adlorl Ogrevalna moč: 51 kW Moč motorja za kroženje: 5,5 kW Priključna moč: 61 kVA

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Zwillings-Trommelspiral-Heißluftofen direkt aus einer geschlossenen Fabrik, wurde zur Vor-Garung von Burgern und Nuggets eingesetzt. Diese Maschinen sind speziell für das Hochleistungsgaren, Grillen und Dämpfen einer Vielzahl von Produkten konzipiert. Der Gar-, Grill- oder Dämpfgrad wird durch die Lufttemperatur, die Luftgeschwindigkeit, die Luftfeuchtigkeit und die Verweilzeit des Produkts im System bestimmt. Elektrisch beheizt. 96 m x 600 mm Band. Im Einsatz von 2007 bis 2016, als der Vertrag in ein anderes Werk verlagert wurde. Die Maschine befindet sich in ausgezeichnetem Zustand. Wir verfügen außerdem über weitere Ausrüstung aus der Fabrik – Former, Fritteusen, Beschichtungsmaschinen, Filter, Spiralfroster, Verpackungslinien usw. Bitte beachten Sie, dass die Fotos vermutlich zwei verschiedene Öfen zeigen – beide sind jedoch baugleich bzw. sehr ähnlich. Lredpfemrrwfox Adlel

Leto izdelave: 1988, stanje: kot nova (razstavni stroj), številka stroja/vozila: 1116/87, MANUFACTURER: ELTERMA / IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR: 1988 CONDITION: New, unused; requires new control cabinet Charge dimensions: 610x900x500 mm Maximum load: 500 kg Operating temperature: 150-750°C Approximate chamber heating time to 550°C: 30 minutes Ledpfxsm E Tvhs Adlorl

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: AS4002/10, Funkcionalnost: popolnoma funkcionalen, Dieser Brennofen wurde vom italienischen Hersteller SITI gefertigt und ist für das Brennen von Sanitärkeramik geeignet. Die garantierte Brenntemperatur liegt bei 1220-1230 °C. Er kann auch für das Nachbrennen (Korrekturbrennen) von Sanitärkeramik verwendet werden. Der Brennofen wird mit 10 vollständigen Ofenwagen geliefert, die mit hitzebeständigen Zubehörteilen ausgestattet sind. Zusätzlich sind ein manueller Verschiebewagen für die Ofenwagen sowie ein hydraulischer Hubtisch zum Beladen der Stücke enthalten. Weiterhin gehören vier Edelstahl-Abzugsschornsteine zum Lieferumfang. Der Ofen war drei Jahre in Betrieb und wurde im Jahr 2021 fachgerecht demontiert. Er befindet sich derzeit eingelagert in Ludinovo, Region Kaluga, Russland. Lrsdou S E Umjpfx Adlsl

Stanje: zelo dobro (rabljeno), Rabljeni plinski paneli za polnilne rampe – kisik, argon, dušik Na voljo je več profesionalnih plinskih panelov / plinskih razdelilnikov za polnilne rampe za jeklenke, primernih za jeklenke s kisikom, argonom in dušikom. Podrobnosti: Proizvajalec: SIAD GAS SPECIALI Lredsy N S Hhepfx Adlel Opremljeni z visokotlačnimi manometri do 300 bar in fino regulacijo Za polnjenje jeklenk in distribucijo plina Prevzem po dogovoru. Za vprašanja ali zanimanje se prosim obrnite za več informacij.

Stanje: zelo dobro (rabljeno), Professional mobile tank for storage and distribution of diesel fuel / light heating oil from the renowned German manufacturer Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, adapted for forklift transport. The tank is equipped with a 24V electric pump from HORN GmbH and a fuel dispensing nozzle. Ideal for: • Farms • Workshops • Transport companies • Construction sites • Fuel storage for machines and equipment Technical data: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • Fuel pump: HORN GmbH • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum delivery height: 6 m • For diesel and light heating oil • Dispensing nozzle + hoses • Protective housing • Forklift transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use and wear due to age and operation. Visual condition and completeness as shown in the photos. Ledpey Nm Rnefx Adlerl Included: • 250L tank • 24V pump • Hoses • Dispensing nozzle • Transport frame.

Stanje: zelo dobro (rabljeno), Laser Cutting Machine for Steel SUDA FC 1530 Material / Metal Laser Type / Fiber Laser Cutting Area / 1500 x 3000 mm Cutting Thickness / Depends on processed materials Laser Source Brand / RAYCUS RFL-C1000 Operation Mode / Continuous wave Configuration / 3-axis Supported Cutting Products / Sheet metal and tube Cooling / Air and liquid cooled with S&A CWFL-1000 chiller Cutting Speed / Depends on various materials Supported Graphic Formats / AI, PLT, DXF, BMP, DST, DWG, LAS, DXP CNC / Yes Laser Head Brand / WSX Servo Motor Brand / Schneider Guideway Brand / THK Control System Brand / Cypcut Lodpfsvkf Rdox Adlsrl Control System Operating System / CYPCUT system Power Supply / 1000W Laser Wavelength / 1080nm Working Size / 1500 x 3000 mm Positioning / Red dot indicator Height: 1,850 mm Width: 2,111 mm Length: 3,450 mm Weight (kg) / 2,500 kg This listing is for the SUDA FC 1530 steel laser cutting machine + S&A CWFL-1000 chiller. !The sheet metal straightener is listed separately!

Stanje: zelo dobro (rabljeno), Profesionalni diskasti rezkar Ø100 mm x 6 mm z izmenljivimi rezilnimi ploščicami, nameščen na držalu SK40 – Izdelano v Nemčiji. Idealno za hitro in natančno utorno rezkanje, rezanje ter bočno obdelavo jekla, litega železa, aluminija in drugih konstrukcijskih materialov. Rezkar je opremljen z večrezilnimi ploščicami – zagotavlja visoko učinkovitost rezkanja in dolgo življenjsko dobo orodja. Celota v dobrem delovnem stanju, pripravljena za takojšnje delo v CNC centru. • Premer rezkarja: Ø100 mm • Širina reza: 6 mm • Izmenljive rezalne ploščice • Priprava: konus SK40 • Stanje: rabljeno – 100% delujoče • Proizvodnja: Izdelano v Nemčiji Lredjxllclopfx Adlol

Stanje: rabljeno, prevoženi kilometri: 183.009 km, moč: 243 kW (330,39 KM), prva registracija: 12/2017, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.150 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, We are very pleased that our offer has caught your interest and we can already assure you that you will be able to purchase a good and attractively priced vehicle with a verifiable service history from us! Certified BÖSE sliding wall body with rear cargo securing Tow bar (AHK) Tail lift (LBW) Steering axle Retarder!!! Adaptive Cruise Control (ACC) Navigation system Reversing camera Full air suspension GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organize your vehicle registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING Upon request, we will be happy to provide you with a leasing, hire-purchase or financing offer. SERVICE Lrodpfxovm Nlqe Adlol TÜV inspection / UVV tail lift inspection / LGS test / tachograph calibration / installation of OBU and servicing by our authorized workshop on site TOLL / ROAD FEES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station – 500 m away Frankfurt Airport – 150 km Frankfurt-Hahn Airport – 40 km Luxembourg Airport – 75 km Sale in accordance with our General Terms and Conditions. The information provided online constitutes non-binding descriptions and does not represent guaranteed properties. The seller is not liable for typing or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Stanje: rabljeno, prevoženi kilometri: 32.200 km, dvižna višina: 58.100 mm, Leto izdelave: 2021, Pogon: kolo Lastna masa: 48.600 kg Lodpfxotr Ntwo Adlerl Dvižna zmogljivost: 7.000 kg Serijska številka: 597193 Stanje pnevmatik spredaj: 95 Stanje pnevmatik zadaj: 95 Transportne dimenzije (D x Š x V): 15,98 x 2,75 x 3,99 m Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, številka stroja/vozila: 8FBM20T-16723, Leto izdelave: 2022, obratovalne ure: 80 h, dvižna višina: 4.750 mm, vrsta goriva: dizel, proizvajalec motorjev: -, Dvižna zmogljivost: 2.000 kg Gradbena višina: 214 cm Stanje sprednjih pnevmatik: 100 Stanje zadnjih pnevmatik: 100 Sprednje pnevmatike: - Zadnje pnevmatike: - Transportne dimenzije (D x Š x V): 3,5 x 1,15 x 2,13 Za več informacij se obrnite na PFEIFER GROUP. Ljdjq Dl Adjpfx Adlsrl