Neuporabljene Kondenzatne Črpalke In Nadomestni Deli nakup rabljenega (120.653)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, skupna masa: 64.000 kg, Drop hammer Huta Zygmunt 7000 kgm, manufactured in Romania under license. Identical to the MPM 2000A model. Bdedpfolnk Tyjx Akroc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Bedpfetgpdzex Akredc

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV 1. Profilirni stroj Bjdpfx Akjyv E Aisrsdc 2. Sistem za izdelavo izolacijskih elementov 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Stanje: dober (rabljeno), Mobilni dostavni transporter za zgibni stroj Heidelberg SAK-66. Popolnoma delujoč, pripravljen za proizvodnjo. Izdelan v Heidelbergu, Nemčija. Povsem novi trakovi. Možnost povezave s katerim koli zgibnim strojem Heidelberg, z brezstopenjsko nastavitvijo hitrosti dostave. Nastavljiva višina in kot. Bdedpfx Asy Ehknokrjc

Leto izdelave: 2022, stanje: rabljeno, Gs international 12t Letnik: 2022 Širina: 2,25 m Hidravlično nastavljiv Bedpfxoy Tltce Akrsdc Za vas lahko uredimo tudi prevoz.

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Bodpfxem Nntyo Akrjdc Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Bodpfxswrkcts Akrjdc Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, prevoženi kilometri: 70 km, moč: 107 kW (145,48 KM), vrsta goriva: električni, konfiguracija osi: 4x2, medosna razdalja: 4.220 mm, gorivo: elektrika, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, dovoljena osna obremenitev (os 1): 1.850 kg, dovoljena osna obremenitev (os 2): 2.100 kg, dolžina tovornega prostora: 44.000 mm, širina tovornega prostora: 21.000 mm, Leto izdelave: 2026, Oprema: ABS, EBS (Elektronski zavorni sistem), centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, servovolan, spojka prikolice, tempomat, = Dodatne možnosti in oprema = - Ogrevana zunanja ogledala - Sedežna klop za sovoznika - Voznikov zračni meh (airbag) - Centralno zaklepanje z daljinskim upravljanjem - Tempomat - Voznikov sedež nastavljiv po višini - Volan nastavljiv po višini - Klimatska naprava - LED dnevna osvetlitev - Sredinski naslon za roke spredaj - Radio DAB MP3 Bluetooth 4.0 - Imobilizator - Ogrevano vetrobransko steklo Bdjdpfx Akew U N Tbjrjc - Pregradna stena = Dodatne informacije = Splošne informacije Število vrat: 2 Letnik: 2026 Kabina: enojna Konfiguracija osi Prednja os: Najv. obremenitev osi: 1850 kg; Krmiljena Največja dovoljena obremenitev zadnje osi: 2100 kg Teže Lastna teža: 2.765 kg Nosilnost: 735 kg Dovoljena skupna masa: 3.500 kg Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Optično stanje: zelo dobro

Leto izdelave: 2024, stanje: rabljeno, To ogłoszenie dotyczy zestawu Frozen in Time F100 Automatyczna Liofilizator + Chiller Frigel. Urządzenie jest w pełni sprawne i gotowe do natychmiastowego odbioru. Wyjątkowa okazja nabycia wysokowydajnego, przemysłowego zestawu do liofilizacji, zakupionego jako nowy w czerwcu 2024 roku. Ten kompletny pakiet obejmuje zaawansowany liofilizator Frozen in Time F100 wraz z profesjonalną chłodziarką przemysłową Frigel, chłodzoną powietrzem. System był regularnie serwisowany i jest w doskonałym stanie technicznym. Został zaprojektowany z myślą o niezawodnej, ciągłej produkcji. Obecny właściciel wycofuje się z rynku słodyczy liofilizowanych i koncentruje działalność na innych sektorach, co daje możliwość natychmiastowego zakupu sprzętu bez oczekiwania na realizację zamówienia przez producenta. Co zawiera oferta? - [x] 1 x Frozen in Time F100 - Przemysłowy Automatyczny Liofilizator - [x] 1 x Chiller Frigel - Przemysłowa Chłodziarka Wodna, chłodzona powietrzem - [x] 3 x Kompletne zestawy tac produkcyjnych (pełne wykorzystanie 22-miejscowej konfiguracji) - [x] Oryginalna dokumentacja techniczna: kompletne specyfikacje producenta, rysunki konstrukcyjne oraz instrukcje obsługi Parametry techniczne 1. Frozen in Time F100 Automatyczny Liofilizator Przeznaczony do procesów spożywczych i przemysłowych, zapewnia pełną automatyzację od zamrażania kontaktowego po końcowe suszenie, wszystko w jednym, zaprogramowanym cyklu. - Producent: Frozen in Time - Wydajność suszenia: powyżej 100 kg produktu na cykl 16–24 h (w zależności od rodzaju wsadu) - Kondensator lodu: pojemność 150 kg - Wydajność kondensatora: 130 kg / 24 h - Temperatura kondensatora: -60°C - System rozmrażania: Gorący gaz - Półki i sloty: 13 półek, łącznie 22 miejsca na tace - Całkowita powierzchnia półek: 10,4 m² - Odstęp między półkami: 30 mm - Zakres temperatur w komorze: od -50°C do +90°C - Pompa próżniowa: wysokiej klasy Pfeiffer Duo 65 - Chłodzenie: mocny kompresor 155 m³/h na czynnik R404A - Wymiary (W x S x D): 2,1 m x 1,8 m x 3,6 m 2. Przemysłowy Chiller Wodny Frigel (Seria MRS) Chłodziarka procesowa klasy przemysłowej, o bardzo efektywnej konstrukcji i kompaktowych wymiarach, idealna do ustawienia bezpośrednio przy maszynach przetwórczych. Bdodsy Tmrmspfx Akrjc - Producent: Frigel - Kompresor: niezawodny hermetyczny kompresor typu Scroll - Czynnik chłodniczy: ekologiczny R410A - Kondensator: efektywna, w pełni aluminiowa technologia mikrokanaliku; wydajność wymiany ciepła wyższa o 20-40% i masa niższa o 60% w porównaniu do tradycyjnych modeli lamelowych - Parametry pracy: zakres temperatur wody od 0°C do 25°C, praca w wysokich temperaturach otoczenia do 45°C - Serwis: wytrzymała konstrukcja, bardzo łatwa w czyszczeniu myjką ciśnieniową

Stanje: rabljeno, največja dovoljena obremenitev: 33.800 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2012, naslednji pregled (TÜV): 09/2026, prostornina tovornega prostora: 95 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Own hydraulic unit (24V) * Hydraulic lifting roof * Hydraulic tail lift * 3rd deck swan neck * 3rd deck low bed * Electronic livestock scale * Drinking system * Heating * Radio system for body * Fan * Side slider * Telematics system ----* VSE ETS2 forced steering (electrohydraulic) * Remote control for steering * Additional lighting * Camera ----Loading height (1st/2nd/3rd deck) * Swan neck: 1.90/1.36/0.90 m * Low bed 01: 1.90/1.78/1.20 m * Low bed 02: 1.90/1.55/1.02 m Total loading area: * 1/2/1 deck = 50.05 m² * 1/2/2 deck = 55.00 m² * 2/2/2 deck = 64.00 m² Bdedpfxoy Hn Rdo Akroc * 2/3/2 deck = 79.90 m² * 2/3/3 deck = 86.80 m² * 3/3/3 deck = 94.50 m² ----* Tire size: 245/70R17.5 * Technical gross weight: 34,000 kg * Unladen weight: 12,200 kg * Overall length: 14,200 mm * Safety inspection due: 03.2026 ----Vehicle number: 12027----Errors and prior sale excepted----Advertising and various lettering have been digitally removed. -----We are happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of the rest. Among other things, we can offer you the following services for an additional fee: ----Trade-in of your old vehicle TÜV/inspection certification Complete export processing Financing brokerage Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport ----Your VTS team

Stanje: rabljeno, Leto izdelave: 2000, potovalna razdalja osi X: 600 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, MORI SEIKI SV-400 S 4. IN 5. OSJO VERTIKALNI OBRATOVALNI CENTER PROIZVAJALEC: MORI SEIKI, IZDELANO NA JAPONSKEM MODEL: SV-400 LETO: 2000 KRMILJE: MORI FANUC MSC 501 VELIKOST MIZE: 900,0 x 500,0 mm POMIKI (XYZ): X: 600,0 mm Y: 430,0 mm Z: 460,0 mm HITROST VRETENA: do 12.000 min⁻¹ VRETENSKI KONUS: BT 40 MENJALNIK ORODIJ (ATC): 30 POSTAJ HITRI POMIK (XYZ): 32.000 mm/min PODAJANJE: 1–16.000 mm/min DODATNO: - NIKKEN enota za 4. in 5. os - RENISHAW merilni sistem - DVOJNI transporter za ostružke Bdsdpstvau Hofx Akroc - HLADILNI SISTEM

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Bdedpfx Akowzzzforec Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč in malo uporabljen tračni sušilnik podjetja New eco-tec naprodaj. Po želji je možen tudi z izpiralnikom zraka in silosom 180 m³ za posušene materiale. Naprava je bila do nedavnega v obratovanju in je takoj pripravljena za uporabo. Sistem obsega 2 kontejnerja in ima dolžino traku 24 m, projektirano za toplotno moč 1,5 MW. Tračni sušilnik je v kontejnerjih v celoti izdelan iz nerjavečega jekla. Bdedpfx Akeyr Aiqsrsc Ogled možen po dogovoru.

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Bsdpemmuq Iefx Akredc Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Bodpfomr Hpcjx Akrjdc Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) With lateral safety door (doors slide to the rear)

Stanje: rabljeno, Leto izdelave: 2005, TAKISAWA TC 350M CNC stružniški center Proizvajalec: TAKISAWA, izdelano na Japonskem Model: TC – 350M L5 Krmiljenje: FANUC 21-iTB Leto: 2005 Revolver: 12 postaj Maksimalni premer obdelave: 700,0 mm Največji stružni premer: 460,0 mm Največja stružna dolžina: 510,0 mm Hodi: X-os – 440,0 mm / Z-os – 550,0 mm Obratno število vretena: do 2.500 min⁻¹ Kapaciteta palic: 80,0 mm (potrditi) Dodatno: C-os Bjdpfxey Eyb Es Akredc Rezkanje Konjiček Tipalo za nastavljanje orodij Transportni trak za ostružke 10'' 3-čeljustna vpenjalna glava Orodja za revolversko glavo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good, nearly new condition. The machine comes from a very small joinery and has had very little use. The machine is in its original state; only cleaned, with the paintwork untouched. With this machine, you can mill elongated slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill elongated slots for lock cases, for example, and similar applications, or create all types of frame dowel joints—right-angled, butt, and mitre joints. Ideal for dowel joints in timber frame construction, furniture, door, window, and staircase production, as well as similar applications. Thanks to drilling on two levels, the index rails, stops, and the machine’s setup, dowel joints can be produced in the shortest time, making the machine highly efficient. Requires a compressed air supply of 6 bar (very low air consumption). Right-hand rotation. Mills and drills very well and cleanly. Comes with 2 angle stops (a centre stop and a side stop, which can be used on either side). Also includes a mitre stop. At the front of the machine table, there is a 2000mm-long guide rail with two flip stops. The rail can be shortened or extended as needed. Workpieces are clamped using 2 pneumatic clamping cylinders. Bdjdpfsynv E Rex Akrjc Height adjustment between drilling levels is also pneumatic. The pneumatic switch is at the front of the machine, enabling quick adjustment of indexing and drilling levels. Fitted with a precision 12mm indexing rail, featuring a centre position and 12 positions to the left and right. Can be quickly converted for slot-milling; the machine can then be used without the indexing system and with two adjustable stops left and right, offering a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything works perfectly. We offer nationwide delivery and demonstration within Germany for 220.00 EUR, so you bear no risk when purchasing. Delivery to Austria and other EU countries available on request. Machine table width: 870mm; depth at sides: 140mm; depth at center: 350mm Professional-grade equipment, not DIY store quality. Ready for immediate use. Fitted with 2-jaw drill chucks up to 20mm. Very robust and durable construction. The precision linear guides with backlash-free ball bearing bushings are fine and operate smoothly.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Machine replacement with a larger model, condition is very good. Specification below and in the attached photos. 1. Equipped with a full-color touchscreen monitor, the main machine, transfer, and conveyor can automatically control speed and feature a synchronized parameter setting system. 2. The machine features movable and adjustable operating functions in every section. It is fitted with a precision lever design. Operation is simple, convenient, and efficient for single-person use. 3. High-power stepless frequency conversion and high-efficiency motor; maximum speed can reach 400 m/min. Power transmission uses a heavy-duty belt drive—low noise, high efficiency, easy maintenance, and cost-effectiveness. 4. Each functional component of the machine adopts a modular design, which is convenient for assembly, easy product replacement and debugging, user-friendly for beginners to master the technology, and easy to learn. 5. Unique upper and lower glue tank design, coordinated with product requirements. 6. Compression and conveyor section equipped with pressure adjustment to suit product requirements. Comes with a set of special soft belts to ensure uniform pressure and excellent quality. Bdjdponlag Iefx Akrec 7. The machine features photoelectric counting, which can be used for total or batch counting, and is fitted with a marker recognition (kicker) device.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Ravni brusilni stroj. Stroj je v novem stanju, tajvanske izdelave. Deloval je le nekaj ur, saj je bil le preizkušen. Standardna oprema: - Brusni kolut - Prilagoditvena prirobnica - Orodje za snemanje prirobnice Bsdjm Tv U Tepfx Akrodc - Vreteno za uravnoteženje koluta - Osnova za uravnoteženje koluta - Brusilni nož z diamantom - Višinske vijake in ploščice za niveliranje - Orodjarna s pripadajočimi orodji - Navodila za uporabo Dodatna oprema: - 3 HP motor vretena (znamka Siemens) namesto 2 HP - Prečni pomik s senzorjem in elektromagnetnim ventilom - Elektromagnetna miza, 150 x 450 mm (fina polarnost) - Hladilni sistem (kapaciteta 52L, motor 1/8 HP) - Samodejna nastavitev prečnega pomika - Križno brušenje - Sistem za hitro pomikanje gor/dol (AC motor, 1/5 HP) - Dodatna prilagoditvena prirobnica za brusni kolut - Zadnji ščitnik pred vodnim pršenjem - LED svetilka namesto halogenske - Inverter za motor vretena 3 HP (proizveden v Tajvanu) - Digitalni merilnik (prečni pomik: 300 mm + vertikalni pomik: 450 mm; dvopasovni ekran) - Samodejni demagnetizator za mizo 5A Če vas zanima, me prosim kontaktirajte! Na voljo še več strojev: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Brusilnik ventilov, stroj za glajenje glave in bloka motorja, stroj za rezkanje ventilskih sedežev, tlačni tester, stroj za pranje delov.

Stanje: zelo dobro (rabljeno), Rezervno ogrevanje Buderus 2500 kW. Olje + plin. V 20-stopinjskem pomorskem kontejnerju. Bdedpfxex U Eyfs Akrjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, POLOAVTOMATSKI STROJ ZA POLNJENJE BAG-IN-BOX Smurfit Kappa Vitop, ITALIJA, 2016 Volumen polnjenja vreč: od 1 l do 28 l Volumen polnjenja Pouch-up: od 1 l do 3 l Krmilna plošča z zaslonom na dotik Polavtomatski polnilni stroj Vitop je zasnovan za polnjenje tekočih in poltekočih izdelkov v vrečke in poucherje. Podaljšana obstojnost izdelkov zaradi inovativnega ventila za polnjenje, ki ločuje vakuumsko in dušikovo vezje Enostavno upravljanje in vzdrževanje Natančen elektromagnetni merilnik pretoka za točno polnjenje Higiensko: opremljen s programom za čiščenje in sanacijo Primeren za Vitop® Original in Vitop® Compact Enostavna prilagoditev med različnimi formati Opcijsko laminarni tok zraka za polnjenje v ultra čistih pogojih Bodeyr Awbjpfx Akrjdc Še posebej primeren za srednje in Pouch-Up® polnila; polavtomatski polnilni stroj Vitop nudi odlično zmogljivost in zanesljivost. Stroj odpira zamašek, izsesa zrak iz vrečke pred polnjenjem, napolni vrečko/embalažo s potrebno količino tekočine in ponovno zapre zamašek. Na koncu cikla se vbrizga dušik, da se bolje ohrani izdelek in olajša čiščenje vratu ventila. Opcijska zaščitna zračna napa mehansko dezinficira področje okoli polnilne glave z nadtlakom.

Stanje: novo, Example configuration: 2x 12m processing table 20kW Raycus fiber laser source Bdjdjwxvl Tspfx Akrec Boci BLT461T+AB rotary axis FSCUT 9200 control system HL-20000 water chiller Yaskawa servo motor Optional: air compressor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Na voljo je popolnoma avtomatski bočno-zapiralni stroj za povezovanje Joinpack. Nosilnost: 50 kg, hitrost: pribl. 24 ciklov/min, širina traku: 9 mm/12 mm/15 mm, material traku: PP, obseg napetosti traku: 15 kg/70 kg, odprtina okvirja: 600 mm/850 mm, višina zapiranja: 650 mm. Dimenzije stroja (D/Š/V): pribl. 1450 mm/600 mm/850 mm, teža: pribl. 300 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Bdedpfx Akoxvrvmjrsc

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobne od vodilnega proizvajalca – 100% IZDELANO V NEMČIJI! Sejalni boben primeren za Doppstadt SM620 Kvadratna zamaknjena perforacija (QV) 12 mm Debelina pločevine = 6 mm !!! Več kot 500 izdelanih sejalnih bobnov letno pove vse !!! - Visoka kakovost! - Vedno preizkušeni! Natančen tek v delovanju! - Najboljše razmerje med ceno in zmogljivostjo - Kratki dobavni roki! - Izsekane perforacije za popolne rezultate presejanja! - Različne perforacije (kvadratne, okrogle, sataste ipd.)! - Majhni mostički za optimalno sito površino! - Različne debeline pločevine! Bedpfxsxnyp Ee Akredc - Možne različne materiale (min. S355)! - Posebne želje kupcev so za nas specialiteta, ne problem! - Vsi bobni so lakirani! - Velika izbira na zalogi! - Za vse običajne sejalne stroje!

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobne vodilnega proizvajalca - 100% IZDELANO V NEMČIJI! Sejalni boben primeren za Terra Select T60 Kvadratno zamaknjena perforacija (QV) 15 mm Debelina pločevine = 6 mm Bodpsxny Egofx Akrsdc !!! Več kot 500 izdelanih sejalnih bobnov na leto govori zase !!! - Visoka kakovost! - Stalno preizkušeni! Popolno vrtenje v delovanju! - Najboljše razmerje med ceno in zmogljivostjo - Kratki dobavni roki! - Prebijane odprtine za popolne rezultate sejanja! - Različne izvedbe odprtin (kvadratne, okrogle, satovje itd.)! - Ozki mostički za optimalno sejalno površino! - Različne debeline pločevine! - Možni različni materiali (min. S355)! - Posebne strankine zahteve za nas niso problem, temveč naša specialnost! - Vsi bobni so lakirani! - Velika zaloga na voljo! - Za vse običajne sejalne stroje!