Modularni Delilnik Polic nakup rabljenega (859)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, Delilnik Mini Rex Futura - Leto izdelave: 2009 - Po obnovi - Tehtalni razpon: 20-135 g - Največja zmogljivost: 4.000 kos/h - Elektronsko upravljanje - Na premičnih koleščkih - Ohišje iz nerjavečega jekla - Lijak, komora, deli in zaokroževalni elementi premazani s teflonom - Napajanje 400 V - Prevzem iz skladišča/možna dostava - 6 mesečna garancija Gsdjymdagepfx Anfsbl - Cena na povpraševanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Gbjdpfxsfdkb Ts Anfjl Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times Gbsdpfxoh R Taqj Anfel - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg Gbodemhhypopfx Anfol - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Gbodpjmhh Dhjfx Anfol Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth Gedpfxemhh Dze Anfobl - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: Gbsdpfxjmhh Ans Anfel - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. Gbjdpfxsguk A Ho Anfjl The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard Gbsdeguk Dkopfx Anfsl - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) Gbedpfemhhy Nox Anfel - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard Gjdpomhh Dtefx Anfebl - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Godpfjguk Dvsx Anfebl - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: dober (rabljeno), Leto izdelave: 2006, Approx. 100 bays of stable boltless shelving units, Gemac; this system works without cross braces. Frame height: 2.48 m or 2.31 m, shelves: 1.20 m x 1.30 m, 130 kg per level – used: Price per bay ex location: only €95 (net), dismantled, packed and loaded! Price for a minimum of 100 bays: Per bay ex location: only €85 (net), dismantled, packed and loaded! Gbjdpjy D Tm Sjfx Anfjl Manufacturer: Gemac Type: should be Normaflex Year of manufacture: 2006 Frame height: approx. 2.48 m Bay depth: 1.20 m Bay width: approx. 1.31 m (including the frames, two bays are approx. 2.74 m wide) Shelves: Shelf load per level: 120 kg Bay load: 850 kg Shelves per bay: 6 including top shelf, which can also be used for storage The 6 shelves/levels consist of 3 large continuous shelves and 3 levels with narrower shelves (which together form a large surface) Shelf lift-out safety locks would need to be purchased new if required by the buyer – usually, they are not necessary (the plastic safety locks tend to break during dismantling – but there are metal types available as new products) Feet are plugged in and fastened with one screw each The top shelf is screwed to the next frame or shelf with a connector plate (all other parts are plugged in); thanks to this and the 3 large shelves with reinforcements, no cross braces or similar are required Available: approx. 100 bays immediately, suitable for assembly in 25 x 4 bay units Condition: good to very good Location: D-77749 Hohberg

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stiskalnica za žemljice Fortuna Automat A 3 H + Izklop delovanja za raznolikost izdelkov! Čiščenje glave nazaj Na novo zasnovana delilna glava z NOVIM rezilom iz nerjavečega jekla za visoko in stalno kakovost robustna tehnika Priključek 400V, vtič 16A-CEE Mere: 720 x 800 x 1510 mm Rabljeni stroj, obnovljen Kakovost iz strokovnega podjetja! Gjdpfxsy Ebi Rs Anfebl Izkusite več kot 35 let izkušenj! Obiščite našo veliko razstavo!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2024, Stroj za deljenje in oblikovanje testa Fortuna preša za žemljice, velikost 3 Polavtomatski, 30-delni za najboljše rezultate! Zmogljiva in robustna tehnika Priključek: 400V, 16A-CEE vtikač Mere: 580 x 580 x 1350 mm (ŠxGxV) Rabljeni stroj, očiščen Kakovost iz strokovnega podjetja! Izkoristite več kot 35 let izkušenj! Opcije: Nerjavno jekleno podest Nov oblikovalni krožnik Servisni paket Vzdrževalna pogodba Usposabljanje in zagon Dostava Gjdsw Tthmopfx Anfobl Obiščite našo razstavo pekarskih strojev!

Stanje: zelo dobro (rabljeno), Na voljo je rabljeni police Schäfer, ki je sestavljen iz naslednjih komponent: Regali: Regal 1: Skupna dolžina 35,00 m, 36 okvirjev, višina 2,00 m, globina 0,30 m, pocinkan Regal 2: Skupna dolžina 43,00 m, višina 2,50 m, globina 0,60 m, lakiran, barva modra. Regal 3: Skupna dolžina 15,00 m, 16 okvirjev, višina 2,50 m, globina 0,60 m, pocinkan. Regal 4: Skupna dolžina 7,00 m, 8 okvirjev, višina 3,00 m, globina 0,60 m, pocinkan. Gbsdpfsy Na Slox Anfol Regal 5: Skupna dolžina: 6,00 m, 7 okvirjev, višina 1,60 m, globina 0,60 m, pocinkan. Polične plošče: 136 kos policnih plošč: dolžina 1,00 m x globina 0,60 m, nosilnost police 150 kg, pocinkano. 275 policnih plošč, 1,00 m x 0,30 m, nosilnost police 70 kg, vroče pocinkano.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 540 kg, skupna dolžina: 800 mm, skupna širina: 720 mm, skupna višina: 1.510 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, vrsta vhodnega toka: trifazni, Stroj za deljenje in oblikovanje testa, stiskalnica za žemljice TOP Fortuna Automat Gr. 3+ z izklopom oblikovanja, čiščenje glave nazaj, popolnoma prenovljena delilna glava, NOV nož iz nerjavečega jekla, visoka doza testa, delilec testa za 30 kosov/delov, priklop 400V, vtičnica 16A-CEE, dimenzije: 720 x 800 x 1510 mm, obnovljen rabljen stroj. Možnosti: Gbedpfxow Hv Tyo Anfel - Nerjaveče jekleno podest - Nov delilni krožnik - Servisni paket - Pogodba o vzdrževanju - Dostavna storitev - Uvajanje & zagon Povprašajte o naši ekskluzivni storitvi!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 24 meseci, skupna širina: 700 mm, skupna dolžina: 660 mm, skupna višina: 1.670 mm, lastna masa: 110 kg, NOVO NOVO NOVO NOVO NOVO VRHUNSKI delilec testa za tradicionalne obrtniške izdelke Gbodpfegtx Nljx Anfel za izjemno kakovost kruha/peciva Robusten delilec testa za prilagodljivo uporabo Plošča za stiskanje, rezalna in štanc mreža se enostavno menjajo Ročno deljenje in oblikovanje testa Ojačana izvedba Ergonomsko deljenje od neposredne obdelave do dolgotrajnega vodenja Izvlečni nosilec za posodo za delce testa Naprava je prostor varčna in omogoča shranjevanje 4 vložkov ni električnega priključka, brez vzdrževanja NOVA stroj & pregledano od SAB z garancijo + servis rezervnih delov Leasing & najem + uvajanje & zagon Dostava Obiščite naš veliki park pekarskih strojev!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, vhodna napetost: 400 V, trajanje garancije: 12 meseci, Certificirano po DGUV do: 05/2028, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, potrebna višina: 924 mm, zahteva za prostor dolžina: 732 mm, potrebna širina: 832 mm, NEU NEU JAC Baguett - Teigteiler NEU NEU Godohwzknjpfx Anfebl TOP Modell: Diviform - max. 5 kg Fassung (460 x 387 x 125 mm BxTxH) - Teigteilung und Formgebung - Easylock automatisches Einrasten des Gitterhalters - Modulare Lösung dank Teil- und Formgitter - Platzsparend - Edelstahlausführung - Schnell und effizient mit Easy Clean - Vielseitig einsetzbar - 100 verschiedene Gitter werden angeboten - Bis zu 400 Teiglinge pro Stunde werden geteilt und 3000 geformt Nur bei uns DGUV V3 geprüft Anschluss 400V 16A-CEE Stecker Maße: 832 x 732 x 924/1604 mm, BxTxH Neumaschine & SAB geprüft mit Gewährleistung + Ersatzteil Service Option: Leasing & Miet Service Fullmatic: Automatischer Zyklus Easyflour: Mehlstreuer Diviform: mit Pressdeckel Wartungsvertrag Lieferservice Einweisung & Inbetriebnahme Besuchen Sie unseren großen Bäckereimaschinen Park!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 24 meseci, skupna širina: 620 mm, skupna dolžina: 660 mm, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, moč: 1,3 kW (1,77 KM), vrsta vhodnega toka: trifazni, Certificirano po DGUV do: 05/2028, NOVO NOVO Stroj za oblikovanje žemljic NOVO NOVO VRHUNSKI popolnoma avtomatski stroj za deljenje in oblikovanje testa Daub model: Divider Automat 3-30 "Original" s 3 oblikovalnimi krožniki Delilno območje: 30 do 100 gramov/kos delitev na 30 delov z rezilom iz nerjavečega jekla enostavno upravljanje z 10 programi uporabniku prijazen, enostaven položaj za čiščenje! Obroč za testo s teflonsko prevleko in "easy klick" Ojačana stiskalna glava Zamenljiva glava z rezili Stroj je premičen Zmogljivost max pribl. 6000 kosov/uro samo pri nas DGUV V3 preizkušeno Priključek 400V, 16A-CEE vtič Nova naprava & SAB preizkušena z garancijo + servis rezervnih delov Opcije: Leasing & najem Oblikovalni krožnik Vzdrževalna pogodba Servisni paket Dostava Usposabljanje & zagon Velika izbira delilnikov testa na zalogi! Gbjdpfeu Rzncex Anfel

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 24 meseci, skupna širina: 600 mm, skupna dolžina: 700 mm, skupna višina: 1.520 mm, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, moč: 1 kW (1,36 KM), vrsta vhodnega toka: trifazni, Certificirano po DGUV do: 05/2028, skupna masa: 375 kg, Novo NOVO Stiskalnica za žemlje NOVO NOVO TOP Polavtomatski stroj za deljenje in oblikovanje testa, Model: 3-30 NOVO Izpopolnjena tehnika ... to je "Original"! Rezila z enostavnim položajem za čiščenje! s 3 delovnimi krožniki Testni obroč prevlečen z easy klick Gbodou Eai Ujpfx Anfsl Razdelitveno območje 30 do 100 gramov/kos Delitev na 30 delov Samo pri nas preizkušeno po DGUV V3 Priključek 400V, priključek 16A-CEE NOV STROJ & preverjen pri SAB Z garancijo + servisom rezervnih delov Opcije: Leasing in najem NOV delovni krožnik Servisna pogodba Servisni paket Dostavna storitev Uvajanje in zagon Veliko delilnikov testa takoj dobavljivih iz zaloge!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, NOVO NOVO Stroj za stiskanje žemljic NOVO NOVO Polavtomatski delilni in oblikovalni stroj za testo, Daub model: 4-30 NOVO izpopolnjena tehnologija ... original! Uporabniku prijazna, preprosta pozicija za čiščenje! Gbedpeu Rzk Defx Anfol s 3 oblikovalnimi krožniki testni obroč s teflonsko prevleko in funkcijo "easy klick" Delilno območje: 40 do 130 gramov/kos Delitev na 30 delov z rezilom iz nerjavečega jekla Stroj je premičen Kapaciteta max. 6000 kosov/uro Le pri nas s preverbo DGUV V3 Priključek: 400V, 16A-CEE vtič Mere: 620 x 670 x 1470 mm, ŠxGxV NOV stroj & SAB preverjen z garancijo + storitev rezervnih delov Opcije: Leasing & najem storitev Oblikovalni krožniki Servisna pogodba Servisni paket Dostavna storitev Uvajanje & zagon Najboljšo izbiro delilnikov testa najdete samo pri nas!

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Gbsdjh Izr Uopfx Anfel Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: rabljeno, Različni konzolni regali 4x regal: Dimenzije: 6.125 x 2.400 x 3.000 mm Teža pribl.: 8.000 kg 2x regal: Dimenzije: 5.650 x 2.400 x 3.000 mm Teža pribl.: 7.380 kg Na voljo so statični izračuni Gbedpfx Anjyrq Nlsfsl !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT Gjdoy Rkk Ijpfx Anfjbl You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project