Kraussmaffei 650 Gx Sp 3000 nakup rabljenega (19.497)

Stanje: rabljeno, prevoženi kilometri: 47.681 km, moč: 471 kW (640,38 KM), prva registracija: 01/2024, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2027, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, Coupling height 1.10 m, digital mirror replacement system MAN OptiView, driver comfort seat, multifunction steering wheel, 6kW auxiliary water heater, ASR (traction control), emergency brake assist EBA, long-distance assistant, lane change collision avoidance assistant and turn assist, attention warning system, MAN Media safety package, Light and Visibility Plus, Advanced safety package, driver assistance package, emergency brake signal with hazard warning activation, rolling lock MAN EasyStart, transmission features: MAN EfficientRoll, MAN Idle Speed Driving, rocking free function. Fifth wheel: JOST JSK 42 MK 2 inch, kingpin diameter 2 inch, 162 mm build height, automatic lubrication, 575 mm fifth wheel setting from the center of the last axle. Hjdpfxjvm Imgo Ahuonl

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 47 m³, Chassis Aluminium, cranked chassis (volume version -80 mm). Two fully automatic welded I-beams with welded cross members, frame width 1,300 mm. Axles and Suspension Drum brakes BPW axle units 3x9 t with BPW air suspension, air bellows centrally located to the chassis longitudinal member, lift axle with starting aid and manual forced lowering, raise/lower valve, parking brake. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 30-40% remaining tread, with steel rims 11.75 x 22.5 ET 0, UNI rim bolts for aluminium rims. Kingpin 2" screwed into a 10 mm thick plate. Landing Legs Support legs, manufacturer JOST with 2x20 t load capacity. For air suspension, we use swivel feet. Brake System In accordance with E.G. standards, two-line Wabco system, spring actuated parking brake acting on two axles and EBS-D Wabco aluminium air tank system. Electrical System According to StVZO regulations with 2 five-chamber rear lights, 24 volt system with 2x7 pin sockets, side marker lights, 2 separate halogen reversing lights. Tipper Body/Bed - Fully welded interior Aluminium tipper, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor approx. 8 mm thick high-wear resistant alloy (5383H34/HB 110), front wall 4 mm reinforced straight version, rear wall as universal door in straight version with 2-wing doors in 2/3-1/3 design with a grain slide, ALU round profile welded for sealing the door gap on the tail doors at the sides and bottom, tail doors partly smooth-clad in aluminium, universal door operation automatically pneumatic lockable with separate lever, rear crossbar in ALU foldable, two retainers with rubber buffers at the tipper body fixed to the frame at the front wall. Hydraulic System Tipping cylinder renewed in 2023, hydraulic cylinder mounted on the front wall with a working pressure of approx. 150 bar, make: Edbro 150 bar with approx. 2.5 m hydraulic hose and loose part 1". Hnodpfx Ahsy Rwl Seuol Accessories 6 Parlok mudguards, complete splash flaps over the entire vehicle width fixed to U-protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium swing bars approx. 150 mm higher in the middle, additional centrally mounted bar holder for positioning a total of 2 bars to increase loading width, roll-up tarpaulin with central light strip and separate reinforcements in the abrasion areas, approx. 660 gr./m2 quality with rolling tarp system, surrounding elastic cord at the rear with two hooks fastened to the rear swing bar, walkway on the frame in chassis colour with steps on both sides, side tarp fastened with tension belts, rear tarpaulin closure by means of aluminium cover plate and rolled tarpaulin at the rear with welded cord against water ingress, robust foldable underrun protection in aluminium with towing eyes left, ALU grain funnel with plan sack mounted on the side, 2 wheel chocks incl. holder, etc. Offer and images are subject to change.

Stanje: rabljeno, Leto izdelave: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould open force: 220 kN Moving platen travel force: open: 105 kN close: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clear tie bar spacing (H x V): 710 x 710 mm Mould opening stroke: 920 mm Min. mould height: 380 mm Max. daylight: 1,300 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95 / 48 kN Pump motor: 75 kW Installed heating power: 30 kW Number of cylinder heating zones: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16,000 kg L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Hjdpfexu Uvajx Ahuonl Injection Unit: Shot capacity: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection rate: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw drive power standard or stage 1: 95 kW Screw drive power option or stage 2: 117 kW Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5-inch floppy disk drive for data backup Plasticizing: 1 complete thermoplast plasticizing unit, wear-resistant version, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1,0 kos rabljena brizgalna stiskalnica Proizvajalec: KRAUSS MAFFEI Tip: KM420-2000CX Letnik: 2010 Zapiralna sila: 420 ton Razmak med stebri: 800 x 800 mm Premer polža: 70 mm Največji brizgalni volumen: 1.078 cm³ Teža brizganca: 981 g/PS Krmiljenje: MC5 Oprema: 2x vleka jedra Hnjdpfx Ahjy A Hl Esuol Vmesnik za robota 12-consko upravljanje vročih kanalov Vmesnik za temperirno napravo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 5.672 h, nosilnost: 3.000 kg, dvižna višina: 4.100 mm, prosto dvigovanje: 2.000 mm, težišče tovora: 600 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 2.900 mm, proizvajalec motorjev: G.M., vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 1.340 mm, dolžina vilic: 1.200 mm, širina vilic: 120 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 23X10-12, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 355X65-15, skupna masa: 9.800 kg, lastna masa: 6.800 kg, skupna višina: 2.550 mm, skupna dolžina: 2.100 mm, skupna širina: 2.300 mm, barva: rumena, Oprema: CE označba, bočni pomik, kabina, pogon na vsa štiri kolesa, vilice za palete, 🔶 COMBILIFT C3000XL – 2011 – 5672 mth – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Używane i nowe wózki widłowe z gwarancją jakości – FT LOGISTICS ✔️ Gotowy do pracy. Bez kompromisów. Ten COMBILIFT C3000XL to nie tylko maszyna — to gwarancja sprawnego, niezawodnego i nieprzerwanego przebiegu procesów logistycznych. Przystosowany do pracy w wymagających warunkach, w pełni sprawny technicznie i wizualnie, prezentuje się jak nowy i jest gotowy do natychmiastowego użycia. 📌 Najważniejsze dane techniczne: 📅 Rok produkcji: 2011 Hnsdpfsy In Dtex Ahuel ⏱️ Przebieg: 5672 mth 🔥 Napęd: gaz płynny (LPG) 💪 Udźwig: 3000 kg 📏 Maszt: Duplex – 4100 mm 🔧 Przesuw boczny wideł: 1340 mm | Widły: 1200 mm 🟦 Belka trawersowa: 4000 mm | Widły: 1200 mm 🛞 Opony: superelastyczne (100%) 🛠️ Stan techniczny: 5/5 – po pełnym przeglądzie, gotowy do pracy 🎨 Stan wizualny: po odnowieniu, bez oznak korozji, jak nowy 📐 Wymiary: wysokość 2550 mm | długość 2100 mm | szerokość 2300 mm 📦 Wysokość całkowita: 2900 mm 🛞 Opony: SE – przód 23x10-12 | tył 355x65-15 🏗️ Wysokość podnoszenia swobodnego: 2000 mm 📦 Idealny do: 📚 Magazynów wąskokorytarzowych 🪵 Przemysłu stalowego, drzewnego oraz rur 📏 Przewozu długich ładunków 🏭 Pracy wewnątrz i na zewnątrz FT LOGISTICS – Jakość, na którą możesz liczyć. Serwis, któremu możesz zaufać.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm Hnsdsyzz Irepfx Ahuel - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Moving Platen Drive Force (opening): 45 kN Moving Platen Drive Force (closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Tie Bar Spacing (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Hodjy Nlb Sjpfx Ahusnl Min. Mould Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (forward/back): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Stroke Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electro-Hydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Zones: 5 Oil Capacity: 489 l Dimensions & Weights: Floor Space Approx.: 5.50 x 2.00 x 2.20 m Overall Weight: 8200 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve - 8 x Hot Runner Control Zones - 2 x Core Pull on Moving Platen - 2 x Core Pull on Fixed Platen - Robot Interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 57.830 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, delovna prostornina: 1.047 cm³, Zaklepna sila 3000 kN Maks. sila za odpiranje orodja 160 kN Pogon pomične plošče, odpiranje 86 kN Pogon pomične plošče, zapiranje 68 kN Vpenjalna plošča (š x v) 995 x 1050 mm Prost prehod (š x v) 630 x 630 mm Hod odpiranja orodja 820 mm Minimalna višina vgradnje orodja 330 mm Maksimalna odprtina 1150 mm Izmetalni hod 200 mm Hnsdpfx Ahsy Nk Taeuol Izmetalna sila naprej/nazaj 58 kN Brizgalna enota: Premer polža 70 mm Razmerje L/D 20 Brizgalni tlak 1778 bar Volumen hoda 1047 ccm Teža brizgalnega strela (PS) 953 g Pretok vbrizgavanja 400 ccm/s Hitrost vrtenja polža 218 1/min Pretok plastifikacije 75 g/s Sila šobe 82 kN Elektrohidravlična oprema: Nazivna moč črpalnega motorja 55 kW Vgrajena moč gretja 30 kW Regulacijske cone cilindričnega gretja 6 Polnjenje z oljem 720 l Dimenzije in teža: Potreben prostor pribl. 6,20 x 2,20 x 2,40 m Skupna teža 12500 kg Največja teža orodja 3430 kg Dodatki: - Nihajni elementi Dodatna oprema: - 1 x zračni ventil - 2 x izvleki jedra - Robotski vmesnik po Euromap 12

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 5.672 h, nosilnost: 3.000 kg, dvižna višina: 4.100 mm, prosto dvigovanje: 2.000 mm, težišče tovora: 600 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 2.900 mm, proizvajalec motorjev: G.M., vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 4.000 mm, dolžina vilic: 1.200 mm, širina vilic: 120 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 23X10-12, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 355X65-15, skupna masa: 9.800 kg, lastna masa: 6.800 kg, skupna višina: 2.550 mm, skupna dolžina: 2.100 mm, skupna širina: 2.300 mm, barva: rumena, Oprema: CE označba, bočni pomik, kabina, pogon na vsa štiri kolesa, vilice za palete, 🔶 COMBILIFT C3000XL – 2011 – 5672 mth – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Używane i nowe wózki widłowe z gwarancją jakości – FT LOGISTICS ✔️ Gotowy do pracy. Bez kompromisów. Ten COMBILIFT C3000XL to nie tylko maszyna — to gwarancja sprawnego, niezawodnego i nieprzerwanego przebiegu procesów logistycznych. Przystosowany do pracy w wymagających warunkach, w pełni sprawny technicznie i wizualnie, prezentuje się jak nowy i jest gotowy do natychmiastowego użycia. 📌 Najważniejsze dane techniczne: 📅 Rok produkcji: 2011 ⏱️ Przebieg: 5672 mth 🔥 Napęd: gaz płynny (LPG) 💪 Udźwig: 3000 kg Hnjdpfx Ahoy H E Dhoujl 📏 Maszt: Duplex – 4100 mm 🔧 Przesuw boczny wideł: 1340 mm | Widły: 1200 mm 🟦 Belka trawersowa: 4000 mm | Widły: 1200 mm 🛞 Opony: superelastyczne (100%) 🛠️ Stan techniczny: 5/5 – po pełnym przeglądzie, gotowy do pracy 🎨 Stan wizualny: po odnowieniu, bez oznak korozji, jak nowy 📐 Wymiary: wysokość 2550 mm | długość 2100 mm | szerokość 2300 mm 📦 Wysokość całkowita: 2900 mm 🛞 Opony: SE – przód 23x10-12 | tył 355x65-15 🏗️ Wysokość podnoszenia swobodnego: 2000 mm 📦 Idealny do: 📚 Magazynów wąskokorytarzowych 🪵 Przemysłu stalowego, drzewnego oraz rur 📏 Przewozu długich ładunków 🏭 Pracy wewnątrz i na zewnątrz FT LOGISTICS – Jakość, na którą możesz liczyć. Serwis, któremu możesz zaufać.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 5.672 h, nosilnost: 3.000 kg, dvižna višina: 4.100 mm, prosto dvigovanje: 2.000 mm, težišče tovora: 600 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 2.900 mm, proizvajalec motorjev: G.M., vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 1.340 mm, dolžina vilic: 1.200 mm, širina vilic: 120 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 23X10-12, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 355X65-15, skupna masa: 9.800 kg, lastna masa: 6.800 kg, skupna višina: 2.550 mm, skupna dolžina: 2.100 mm, skupna širina: 2.300 mm, barva: rumena, Oprema: CE označba, bočni pomik, kabina, pogon na vsa štiri kolesa, vilice za palete, 🔶 COMBILIFT C3000XL – 2011 – 5672 mth – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Używane i nowe wózki widłowe z gwarancją jakości – FT LOGISTICS ✔️ Gotowy do pracy. Bez kompromisów. Ten COMBILIFT C3000XL to nie tylko maszyna — to gwarancja sprawnego, niezawodnego i nieprzerwanego przebiegu procesów logistycznych. Przystosowany do pracy w wymagających warunkach, w pełni sprawny technicznie i wizualnie, prezentuje się jak nowy i jest gotowy do natychmiastowego użycia. 📌 Najważniejsze dane techniczne: 📅 Rok produkcji: 2011 ⏱️ Przebieg: 5672 mth 🔥 Napęd: gaz płynny (LPG) 💪 Udźwig: 3000 kg 📏 Maszt: Duplex – 4100 mm 🔧 Przesuw boczny wideł: 1340 mm | Widły: 1200 mm 🟦 Belka trawersowa: 4000 mm | Widły: 1200 mm 🛞 Opony: superelastyczne (100%) 🛠️ Stan techniczny: 5/5 – po pełnym przeglądzie, gotowy do pracy 🎨 Stan wizualny: po odnowieniu, bez oznak korozji, jak nowy Hnsdoy H E A Repfx Ahujl 📐 Wymiary: wysokość 2550 mm | długość 2100 mm | szerokość 2300 mm 📦 Wysokość całkowita: 2900 mm 🛞 Opony: SE – przód 23x10-12 | tył 355x65-15 🏗️ Wysokość podnoszenia swobodnego: 2000 mm 📦 Idealny do: 📚 Magazynów wąskokorytarzowych 🪵 Przemysłu stalowego, drzewnego oraz rur 📏 Przewozu długich ładunków 🏭 Pracy wewnątrz i na zewnątrz FT LOGISTICS – Jakość, na którą możesz liczyć. Serwis, któremu możesz zaufać.

Stanje: novo, 🧰 Lastnosti izdelka • Stanje: novo • Barva: siva • Prostornina: 650 l • Nosilnost: 4000 kg (pri 5 °C sobni temperaturi) • Lastna teža: 43 kg • Dolžina: 120 cm • Širina: 100 cm • Višina: 78 cm • Možnost zlaganja: Da • Oblikovno stabilno: Da • Posebnosti: primerno za regalno skladiščenje, tekočinsko nepropustno, možen izpustni ventil Hnedehvrk Tepfx Ahusl 💰 Cena € 155,- neto brez DDV • Količinski popust: na zahtevo • Stroški pošiljanja: po vsej Evropi na zahtevo • Dobavni rok: na zalogi, takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Več kot 5000 tm paletnih regalov različnih proizvajalcev vedno na zalogi (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, navedbah in cenah ter do vmesne prodaje! Glejte naše splošne pogoje poslovanja, vse cene so brez DDV, franko skladišče.)

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 69.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, premer vijaka: 45 mm, Naprodaj je brizgalni stroj znamke KraussMaffei, tip KM 125-700C2. Stroj je popolnoma funkcionalen in je bil v uporabi do pred kratkim. Tehnični podatki: Leto izdelave: 2000 Obratovalne ure: 69.000 h Zapiralna sila: 125 t Premer cilindra: 45 mm Igelni zaporni ventil: pnevmatičen Hnedpfx Ahsx Ituqeuol Izvlekač jedra: 2x hidravličen Notranji merilec tlaka

Stanje: zelo dobro (rabljeno), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating hours: Device 816.5 h Lamp operating hours: 647.4 h Total irradiator operating hours: 88.9 h Atlas CI3000+ Xenon Weather-Ometer with calibration suitcase The Ci3000+ Weather-Ometer and Fade-Ometer, with their advanced digital control systems, represent milestone achievements in the application of digital and optical technologies to user-friendly laboratory weathering instruments. The CI3000 series is approved by many OEMs in the textile, paint and coatings as well as the plastics industries as the exclusive platform for precise, reproducible, and repeatable results to predict product lifespan. The CI3000 series is certified according to CE, UL, CSA, ISO, and EN. Key features of this device include: a rotating specimen rack to maximize homogeneity of all samples; custom-designed nozzles for uniform front and rear sample spraying; ASTM black panel thermometer or ISO/DIN black standard thermometer for control and monitoring of sample-level temperature to ensure repeatability of test outcomes. - 4500 W water-cooled xenon lamp - Total exposure area: 2188 cm² (339 in²) - 12-inch TFT full-color touchscreen control panel – displays all test parameters - Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature - Direct setting and control of relative humidity - Direct setting and control of sample chamber air temperature - Display of diagnostic messages - 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Specifications: - Climate type - Test method: Sunlight simulation - Xenon arc lamp light source Applications: - Additives and dyes - Adhesives and sealants - Architecture and construction - Automotive industry - Food and beverages - Graphics - Packaging - Paints and coatings - Photovoltaics - Plastics - Textiles - Wind and solar Hnjdpfx Ahstq Em Ejujl - Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of delivery: (see image) (Specifications subject to change. Errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Technical data for the shelf rack: Racking system: SSI Schäfer Type: R 3000 Technical data for setup: Number of rack rows: 01 pcs. Rack length: 3,290 mm Number of bays per rack row: 02 pcs. Scope of delivery includes: Hodsy Hpn Rspfx Ahusnl 03x upright frames for shelving rack, used Material color: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. bracing girder and base plates (Uprights are pre-assembled) Height: 2,490 mm Depth: 600 mm 12x shelves, used Material color: sendzimir galvanized for frame depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf: 75 kg, with evenly distributed load. 48x shelf supports, used suitable for smooth uprights Material color: sendzimir galvanized 01x cross brace, used Model designation: KV31313 Weight / pc.: approx. 0.405 kg/pc. Material color: sendzimir galvanized 01x load sign with specifications for bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is offered for collection only. Should transport or shipping of this item be required, additional costs will apply, which can be requested separately from us depending on the delivery location and scope of delivery.

Leto izdelave: 1996, stanje: dober (rabljeno), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output: max. approx. 140-180 kg/h for H-PVC pipes; actual values may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed zone heating: 1 Hnjdpfx Ahsh Nmt Dsuel Tool heating zones: 5 Equipment: Dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw tempering Gearbox: Gearbox was replaced at 53,000 operating hours. Overhauled screws and cylinder Note: Current operating time is 62,590 hours.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 61.300 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, razmak između stupova: 470 mm, pritisk: 2.429 letvica, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: We are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Operating hours: 61,300 h Control system: MC5 Closing Unit Technical Data Clamping force: 1,200 kN Tie bar spacing (H x V): 470 x 470 mm Platen size (H x V): 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric location moving platen D: 160 mm Centric location fixed platen D: 125 mm Permissible mould weight: 1,485 kg Injection Unit Technical Data Screw diameter: 35 mm Shot volume: 156 ccm Hnedsy D Adtspfx Ahuel Injection pressure: 2,429 bar Screw length: 23 L/D Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free-flow injection rate: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 6m x 1.7m x 2.19m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras+++ Automation: Handling device/Take-out robot included - Handling: LR 100-2300 Conveying system: Roller conveyor included CE mark: Present Complete maintenance and inspection history Full latest test report Incl. conveyor belt and protective cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrical Equipment Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty until initial commissioning Loading/Shipping Free loaded onto the buyer's truck or free delivered within Germany against freight charge. Available ex our warehouse Hannover, Germany.

Stanje: rabljeno, prevoženi kilometri: 543.854 km, moč: 265 kW (360,30 KM), prva registracija: 06/2007, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 4, skupna širina: 2.550 mm, skupna višina: 3.960 mm, Oprema: ABS, filter saj, klimatska naprava, kompresor, navigacijski sistem, Superstructure/Body: - Spitzer silo body - Tank no. 13452 - Chamber 1 – 11,500 L - Chamber 2 – 11,500 L - Silu CG 600 IC – silo compactor Equipment: - Long cab - Manual gearbox with splitter - Air conditioning - Radio - Reversing camera - Comfort driver's seat with seat heating - Sun visor - 1 bed - Roof hatch - Air suspension on rear axle - 1st, 2nd, and 4th axles steerable Other details: - 1 previous owner - Perm. gross weight: 32.0 t Hnodpfxjy Nuplo Ahuol - Payload: 19.70 t Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approx. 200 vehicles available, including vans, commercial vehicles, and construction machinery! We offer you attractive financing solutions at special conditions on an ongoing basis. If interested, we will be happy to prepare an individual offer for you! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV (MOT) inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not represent guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Equipment listed must be checked separately if necessary. Subject to errors and prior sale.

Stanje: dober (rabljeno), Leto izdelave: 2005, Sila vpenjanja: 500 t Premer vijaka: 80 mm Tip: Horizontalen Pogon: Hidravlični Enota za zapiranje: Zapiralna sila: 500 t Odpiralni hod: 1260 mm Razmak med veznimi palicami (H×V): 900×800 mm Velikost plošče (H×V): 1270×1200 mm Brizgalna enota: Premer polža: 80 mm Maks. brizgalni tlak: 1829 bar Brizgalna prostornina: 1433 cm³ Teža brizga (PS): 1304 g Hnedpfjx H Au Rsx Ahuel Električna oprema: Napetost: 400 V / 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61024546, vpenjalna sila: 800 kN, premer vijaka: 40 mm, injekcijska masa: 180 g, število vbrizgov: 1, vrsta vhodnega toka: trifazni, - Krmilni sistem MC6 - APC Hsdpfx Aeya Egujhuonl

Stanje: zelo dobro (rabljeno), Na prodajo profesionalni industrijski odsesovalec blagovne znamke TEKA, model STRONGMASTER BIA, namenjen za odsesovanje varilnih dimov ter onesnaženega zraka. ‼️ ZELO NIZKA UPORABA – SAMO 1550 DELOVNIH UR (kar je redkost pri tovrstnih napravah) ⚙️ Tehnični podatki: Proizvajalec: TEKA (Nemčija) Model: STRONGMASTER BIA Kapaciteta: 3000 m³/h Maks. podtlak: 2500 Pa Moč motorja: 1,1 kW Napajanje: 400V (3PH + N + PE) Frekvenca: 50 Hz Nazivni tok: 2,5 A Stopnja zaščite: IP54 Krmilna napetost: 24V Teža: pribl. 130 kg 🔧 Oprema: Ekstrakcijska roka (fleksibilna) Industrijski filter Nadzorna plošča Števec delovnih ur Mobilna konstrukcija na kolesih 🔍 Stanje: Rabljena naprava, v dobrem tehničnem stanju. Vidne običajne sledi uporabe. Hjdpfoyz Diljx Ahusnl ✅ Nizka uporaba – samo 1550h ➡️ Naprava malo obrabljena ➡️ Velik potencial za nadaljnjo uporabo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine: Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards. We have been a major dealer in used injection molding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery: As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently available in our tested warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine Number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2x core pulls (movable core, fixed core) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection performance - Fast SK shut-down CX Midrange - Ejection of cooled nozzle plug - Start handling during mold movement - Start-up mode - Cycle time analysis - External USB keyboard - Graphic analysis with maintenance notes - Electronic coding injection unit - Pneumatic valve on BWAP for blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target/actual comparison - PV control - Active back pressure control - Single owner – German origin - Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2,500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening stroke: 820 mm Mold height: min. 330 mm Max. daylight: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrical Equipment Pump: 45 kW Hnodpoxqhuujfx Ahuol Heaters: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software included Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply). The machine is offered function-tested and is in our sole ownership. The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power. For additional information about our machines and company: - We sell only machines purchased from active production that are in our own stock in Hannover. - All offered machines are tested and inspected before dismantling. - We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment. - All machines offered come from successful companies where maintenance and care are self-evident. - All machines offered are available for inspection at our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 35.808 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 204 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 186 g, Here, we as a dealer of injection moulding machines offer the following well-maintained, used injection moulding machine for sale. Of course, we also buy well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial no.: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control: MC 5 Fully functional Condition: very well maintained Machine from German first ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic shut-off nozzle - 1 pneumatic valve at BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject sorting chute Hsdpfeyrd U Ujx Ahujnl - Nozzle protection door – ejector area safety door foldable - Euromap interface 18 on FWAP - Ejector plate electrically operated in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2x hydraulic core pull (on BWAP and FWAP) - Pressure relief for core pull on BWAP and FWAP - 8-circuit water manifold - 8x temperature control zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up circuit, quality assurance package, cycle time analysis, cycle memory, event log - BluePOWER package – energy consumption display - Graphical analysis package, trend graphics - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Main language: German Injection unit Screw diameter: 40 mm Shot weight: 186 g/PS Injection pressure: 1860 bar Injection volume: 204 ccm Clamping unit Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Mounting plates: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke / force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until initial commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery (ex works) against reimbursement of freight costs Available from our warehouse in Hannover, Germany

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machinery: From 01.07.2025, used machines can also be depreciated for tax purposes with a special depreciation rate of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster (§ 7 Para. 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-colour, 2-component machine Control: MC6 Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st Injection Unit 750 horizontal Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping Unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – full machine card as PDF document attached Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pull 1 x blow-off Water BGS: 6 circuits each, nozzle side and ejector side BluePower technology up to 40% energy savings Hedpfxoyf Uy Ue Ahujnl The machine is very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or delivered to site with freight costs reimbursed. Information about the machines we offer and our company: - We only sell machines acquired from ongoing production from our own stock in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers trading third-party property - All machines offered come from successful businesses where maintenance and care are standard - All offered machines can be inspected at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Here we offer a very well-maintained, regularly serviced injection moulding machine. We are also interested in taking back well-kept machines from model year 2010 and newer as part exchange. Please offer us any surplus machines you may have coming available. Full maintenance by manufacturer up to the present Injection moulding machine Krauss Maffei KM65-160 C2 Injection moulding machine: Manufacturer / Type: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Full annual servicing carried out by manufacturer Clamping unit: Clamping force: 650 kN / 65 tons Tie bar spacing: 405 x 405 mm Minimum mould height: 250 mm Max. platen opening: 750 mm Standard platen size: 610 x 610 mm Ejector stroke: 150 mm Core pull: 1 x unit Injection unit: Injection unit size / cylinder diameter: 160 / Cylinder Ø25 mm and cylinder Ø18 mm Max. shot weight (Ø25): 47 g/PS Injection flow rate: 63 cm³/sec Max. specific injection pressure: 2500 bar Handling interface: Euromap 12 Dosing unit interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3,800 mm Width (machine only): 1,050 mm Height: 1,890 mm Oil fill: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown in photos is NOT included in the offer! Hsdpfx Ajh Dp R Ejhusnl The machine is available for immediate delivery from our warehouse. Loaded free onto buyer's truck, or delivered free to address against reimbursement of shipping costs. About the machines and our company: - We only sell machines owned by us, acquired from ongoing production, from our Hanover warehouse - All machines offered are checked and tested prior to removal - We do NOT sell insolvency goods – we are NOT a broker trading in third-party assets - All offered machines come from successful companies where regular servicing and maintenance is a matter of course - All offered machines can be viewed at our warehouse

Stanje: dober (rabljeno), Technical specifications for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Setup details: Number of shelving rows: 01 piece Shelf length: 4,920 mm Number of bays per row: 03 pieces Scope of delivery includes: 04x shelving uprights, used Material finish: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gusset plate and base plates (Shelving uprights are pre-assembled) Height: 2,490 mm Depth: 600 mm 18x shelves, used Material finish: sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight / piece: approx. 8.12 kg Max. load capacity per shelf: 75 kg (with evenly distributed load) 72x shelf brackets, used Suitable for smooth uprights Material finish: sendzimir galvanized 01x cross brace, used Type designation: KV31313 Weight / piece: approx. 0.405 kg Material finish: sendzimir galvanized 01x load label with field and shelf load specifications, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Hedpfxey E S Hte Ahusnl Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only offered for collection. Any additional requested transport or shipping of this item will incur extra costs, which can be provided separately based on the delivery location and scope upon request.