Kel-Berg Tristrani Nagibni Priklopnik nakup rabljenega (6.441)

Stanje: rabljeno, Leto izdelave: 2004, proizvajalec krmilnikov: Heidenhain, model krmilnika: 1830 M - KELCO 110/120, _____ Opis: Vretenčni nastavek za obdelovance: Območje nagiba: -10°/+100° Ijdpfxezl I D Eo Acroaw Število vrtljajev: 800 vrt/min Višina konusa: 175 mm Notranji stožčasti vtič: MK5 Zunanji kratek stožčasti vtič: DIN 55026 Maksimalna teža obdelovanca: 100 kg Vretenčni nastavek za brušenje: Izvedba: Tandem vretenčni nastavek za brušenje Os B: -210°/+30° Notranja brušilna naprava: Notranje vreteno za brušenje Brušilna miza (os X): Os X: 320 mm Maksimalna hitrost: 7,5 m/min Ločljivost: 0,1 μm Podmiza (os Z): Razdalja med konusi: 1.000 mm Os Z: 1.150 mm Maksimalna hitrost: 15 m/min Ločljivost: 0,1 μm Oprema / dodatna oprema: Oskrba s hladilno tekočino: sistem KSS z filtrom Ločilo emulzije: mehansko Podporni nastavek: MK4, hod 48 mm Sistem za zaznavanje konca obdelave: Movomatic Gapcontrol Balansiranje: Elaso EB 500 Merjenje obdelovanca: Marpos T25 Nastavitveni način delovanja: elektronsko ročno kolo Dodatna oprema: različne prirobnice, konusi in vpenjalne glave

Stanje: rabljeno, Premer brusilnega krožnika: 450 mm Dolžina brušenja: 1000 mm Višina med konicama: 225 mm Fotografije že dostavljenih strojev. Mehanska obnova: - Celoten stroj je bil obnovljen po protokolu za meritve Kellenberger. - Nova kabina, ki je prijazna za vzdrževanje. - Novo barvanje. Električna obnova: - Nadzorni sistem FANUC z rešitvijo BLUE-SOLUTION. - Na novo sestavljen omarica za nadzor. - Nova tehnologija pogona. - Zamenjava vseh električnih kablov, tlačnih stikal Berus itd. - Nove absolutne steklene merilne letve v osi x in z. - Nov absolutni rotacijski dajalnik (pri osi B). Fotografije že dostavljenega stroja z drugimi možnostmi opremljanja. Varianta brusilne glave UR/RS: - Razporeditev brusilnih plošč za zunanje in diagonalno brušenje, ena za drugo! - Zato je premer vsake plošče 400 mm! - Zato je bistveno manjša nevarnost trčenja. Iodpfszkvucsx Acrsaw - Enostavnejše programiranje. - Oprema brusilnih plošč: 400 x 63 x 127 mm. - Naprava za uporabo vretena z visoko frekvenco (HF). - Vreteno je na voljo kot dodatna možnost, za doplačilo. - Os B, ki jo nadzoruje CNC, za zunanje, ravno in notranje brušenje v enem vpenjalnem položaju. - Območje vrtenja: +10° / -270°. - Os C za poligonalno brušenje. - Spodnji del je fiksiran. - Motor brusilne glave: 10,0 kW. - Podpirač. - Merilni sistem Marposs za merjenje brusilnih plošč. - Longitudinalna pozicija Marposs.

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, skupna masa: 4.700 kg, Ponujamo rabljeni okrogli brusilni stroj Kellenberger KEL-VISION, letnik 2004. Tip: KEL-VISION Maksimalna teža: 4700 kg Letnik izdelave: 2004 Št. stroja: 665100 Z robotom Universal Robots UR5 Iasdsy Uriajpfx Acrow Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Delno obnovljen stroj z merilnim protokolom v skladu s tolerancami za nove stroje NOV sistem vodenja Eckelmann ENC z BEMA programsko opremo za brušenje Numerično krmiljena B-os Notranja brusilna naprava premer 80 mm Brusni kamen levo premer 400 mm Brusni kamen desno premer 300 mm Notranje brusilno vreteno HJN 828 Hidravlični konjiček Mikro nastavitev Iajdpfx Acsyatx Sorjw Merilni sistem KEL SET

Stanje: rabljeno, TEHNIČNI PODATKI - Višina konice: 125 mm - Največja dolžina brušenja: 430 mm - Največji premer obdelovanca: 249 mm - Največja teža obdelovanca: 100 kg - Dimenzije brusnega koluta: Ø400 x 63 x 127 mm - Hitrost vretena gnane glave obdelovanca: 8 - 800 min⁻¹ - Maksimalni hod X, Z: 320 , 650 mm - Prostorovna potreba: 2500 x 2000 mm - Teža: 4700 kg Iasdjy Tb Aaepfx Acrjw OPREMA - CN FANUC 18iTA - Kontra konica z fino nastavitvijo - Brusilna glava tip URS - Orientacija brusilne glave vsakih 0,1 stopinje - Notranja brusilna naprava z vretenom Ø120 mm FISCHER Tip MFZ-1090 90000 min⁻¹ in tip MFV-1230 12000-30000 min⁻¹ - Različni nosilci (prirobnice) brusnih kolutov - Izmetalec brusnega koluta - 2 fina orodja za dresiranje zunanjih in notranjih brusnih kolutov - Stranska merilna tipala MARPOSS Kel-pos - Naprava Kel-pos - Merilni sistem Kel-pos - 3-čeljustna vpenjalna glava

Stanje: rabljeno, Leto izdelave: 2000, Premer brušenja 450 mm Dolžina brušenja 1000 mm Višina konic 225 mm Stroj je bil delno obnovljen z novo geometrijo ter je bil v uporabi le nekaj tednov in nato zaradi insolventnosti ponovno prodan. Fotografija celotnega stroja je skoraj identične naprave. Fotografija notranjosti in vpenjalnega konjička je z originalnega stroja. - Veliko servisiranje - Nova geometrija mize - Delno prebarvan notranji prostor Oprema brusnih plošč LEVO 400x63x127 mm (standard) Oprema brusnih plošč DESNO 300x40x127 mm Notranja brusalna enota Ø120 mm za visoko-frekvenčna vretena CNC krmiljenje KELCO 120 C-os za racionalno brušenje. Kel-Poly B-OS: CNC krmiljena os B KELCO 120: v konstantno 35 m/s ali 45 m/s Hitro-frekvenčno notranje brusalno vreteno Obratovalna enota za MFV in MFZ vretena Hidravlično vračanje pinole za konjiček BREZ mikro nastavitve na konjičku Vzmetna pinolna loputa Hlajenje nad mizo Standardni vpenjalni konjiček MK 5 DIN 55026, velikost 5" MIKRO-nastavitev za standardni vpenjalni konjiček Obratalo za oblaganje pod mizo Aktivno vzdolžno pozicioniranje KELPOS, MARPOSS, nameščeno na brusalni glavi Sistem za meritev orodja KELSET, MARPOSS Senzor dotika MARPOSS Merilni krmilnik MARPOSS Minialsar pripravljen Iajdpfx Acjxzk Nisrjw Papirni trakasti filter

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 665100, skupna masa: 4.700 kg, višina središča: 125 mm, Krožna brusilnica z robotom! TEHNIČNI PODATKI Višina konic: 125 mm PODATKI O STROJU Krmiljenje: Fanuc 18i-T Skupna teža: 4.700 kg Delovne ure Avtomatski čas (glede na sliko): 41.411 h Čas podajanja (glede na sliko): 14.251 h OPREMA Robot Universal Robots UR5 Standardna oprema 1 brusilni kolut desno 500 x 110 x 203,2 mm 1 ročno žično obračanje »vrtečega dela« z ročnim indeksiranjem vsakih 2,5 stopinj Iaedpfxszcwfuo Acrow Avtomatska uravnoteževalna naprava MARPOSS tip E 82 Hidravlično vračanje pinole za konjiček Nadzor hoda konjička Standardna glavna vpenjalna glava MK 5 DIN 55026 velikost 5"

Stanje: rabljeno, Leto izdelave: 1999, Premer brušenja 350 mm Dolžina brušenja 1000 mm Iajdpfey U N Hpox Acrow Višina med konicama 175 mm Krmiljenje FANUC 18i-TA GENERALNO OBNOVLJENO Fotografija podobnega že dobavljenega stroja - Oprema brusnega kolesa LEVO 500 mm - Oprema brusnega kolesa DESNO 400 mm - Notranja brusilna enota 120 mm za jermensko gnane notranje brusilne vretena (standard) - CNC krmiljenje FANUC 18i-TA - Pripravljeno za kombinirano merilno krmiljenje Marposs (Minialsar, Positionar) z E5N - B-os - Kel-Set - Hidravlični povrat pinole - Mikro nastavitev na konjičku - Glavna vretena z vrtljivo osnovo

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Ijdpey U N Hijfx Acrsaw Centre height: 175 mm Control system: Fanuc 310is CNC control: GE Fanuc 310is Hand-held panel for GE Fanuc CNC control Overhauled according to Kellenberger protocol Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCBN diamond inserts Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing systems KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle housing for internal and external grinding Prepared for measuring controls Movomatic ESZ 400 or Marposs P7 ME Prepared for external filtration system Coolant shut-off for table units Full enclosure for emulsion Mist extraction system for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: delavnici obnovljeno (rabljeno), KELLENBERGER KEL-VISTA UR 175X600 je CNC okrogla brusilnica za visoko natančnost, zanesljivost in natančno obdelavo. Kapaciteta: višina konic 175 mm; razdalja med konicama 800 mm; dolžina brušenja 600 mm; maks. Ø 349 mm; maks. masa 100 kg. Ključni podatki: Z 750 mm; X 320 mm; dimenzije brusnih diskov L Ø400×80×127, R Ø300×40×127; hitrost brusnega diska 875–1900 min⁻¹ (brezstopenjsko); brusilni motor 5 kW; obdelovalno vreteno 8–800 min⁻¹; hitro pomikanje 12 m/min; 3×400 V 50 Hz; teža približno 3000 kg; dimenzije 3200×1700×2000 mm. Oprema: hlajenje, notranji hladilni krog, papirni filter, tipalo MARPOSS, merilni sistem MOVOMATIC, notranja brusilna naprava, uravnoteževalna naprava, RS-232. Primerna za tesne tolerance v avtomobilski, urarski, letalski in medicinski industriji. Iodpeyxn Iysfx Acrjaw

Stanje: rabljeno, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, utmost accuracy, and reliable operation. Capacities: centre height 175 mm, centre distance 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); grinding spindle travel max. 320 mm. Technical data: stepless grinding wheel speeds 1000–2150 rpm (peripheral speed 45 m/s); feed 7,500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible load 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6,000 kg; dimensions 4,700×2,300×2,000 mm; compressed air 6 bar. Accessories: coolant system, paper band filter system, MARPOSS touch probe, set of grinding wheels, live centre, set of centres, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances. Iajdpfx Acoyxn Itorjw

Stanje: rabljeno, KELLENBERGER KEL‑VARIA R175 x 1500 je CNC okrogla brusilni stroj za visoko natančnost, točnost in zanesljivost. Kapacitete: višina med konicami 175 mm, razdalja med konicami 1500 mm, Z-os 1650 mm, do 150 kg; brusni koluti Ø500×80 mm (tudi Ø400×63 mm). Tehnični podatki: hitrost vrtenja brusnega koluta 1000–2150 min⁻¹, obodna hitrost 45 m/s, brusalni hod 320 mm, podajanje 7500 mm/min, motorji 7,5/2 kW, hitro premikanje 15 m/min, 3×400 V, teža ≈6000 kg, mere 4700×2300×2000 mm. Oprema: papirni/krožni filter, MOVOMATIC, Renishaw LP2H, snemalec prirobnic, daljinski upravljalnik, MPM. Za ozke tolerance; panoge: avtomobilska industrija, urarstvo, orodjarstvo, letalstvo, medicinska tehnika. Iaedsyxn A Ropfx Acrsw

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: Iodpfxeuwv H Hj Acroaw - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted Iaodpfx Aeuxfu Nocrow New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Iodpfxjvdk N Ej Acrsaw Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Iasdpfx Asuxfucscrsw Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Ijdet Ii Nbepfx Acrjaw Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Isdpet Ii Rfefx Acrsaw Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Generalno obnovljeno leta 2013 Iasdpfx Acoxyadaorow Ojačano glavno vreteno obdelovanca B-os brezstopenjsko nastavljiva Kontra-vreteno Brez vpenjalne glave in brez lunete na fotografiji Krmiljenje Kelco 90 Stroj je možno pri stranki v obratovanju ogledati do vključno januarja 2026.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 320 mm, pomik po osi Z: 1.150 mm, proizvajalec krmilnikov: HEIDENHAIN, skupna masa: 6.000 kg, Ta brusilni stroj KELLENBERGER KEL VARIA RS 175/1000 je bil izdelan leta 2004 v Švici. Opremljen je z upravljalnikom HEIDENHAIN. Prednosti stroja Kvalitativne prednosti stroja • Dobro stanje Iedpfx Ajyi Elijcrjaw Tehnične prednosti stroja • Razdalja med konicama: 1000 mm • Višina konice: 175 mm • Dimenzije desnega brusnega koluta Ø 400 x 50 mm • Pomiki glave brusnega koluta -210°/+30° • Hitrost vrtenja: 8-800 min⁻¹ • Tip vretena: CM5

Stanje: dober (rabljeno), valjčni brusilni stroj Iasdpfxstrguko Acrew

Stanje: rabljeno, Abstand zwischen den Spitzen: 1000 mm Spitzenhöhe: 250 mm B-Achse: Genauigkeit 0,1" CNC Marke: Kelco CNC Modell: 90 Abmessungen linke Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 63 mm Abmessungen rechte Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 50 mm Werkstückspindel Schwenkbereich: -30º bis +120º Spitzenaufnahme Werkstückspindel: MK 5 Max. Werkstückgewicht zwischen Spitzen: 150 kg Reitstockaufnahme: MK 4 Iasdpfx Asxmg Ekocrjw Reitstockpinolenhub: 50 mm Max. Umfangsgeschwindigkeit: 32 m/s Hochfrequenz-Innenschleifspindel: Ø120 mm Marke der Hochfrequenz-Innenschleifspindel: WARNER Modell K 3.000 Hauptantriebsleistung: 7,5 kW Gesamtleistung: 26,5 kW Max. Verfahrweg Z-Achse: 1.150 mm Max. Vorschubgeschwindigkeit Z-Achse: 15 m/min Drehtischbereich: 0º bis 9º Max. Verfahrweg X-Achse: 320 mm Max. Vorschubgeschwindigkeit X-Achse: 7,5 m/min Länge: 3.600 mm Breite: 2.000 mm Gewicht ca.: 5.000 kg

Stanje: rabljeno, Leto izdelave: 2000, Kellenberger 600 U stroj za kružno brušenje Stanje: polovno Godina proizvodnje: 2000 Tehnički podaci: Sto: Razmak između šiljaka: 600 mm Hod: 900 mm Hod po punom okretu ručnog točka grubo/fino: 20 / 2,5 mm Iasdpfey T E Rzjx Acrow Hod po podeljku na ručnom točku: 0,05 mm Brzina, hidraulički beskonačno podesiva: 0,02 - 6 m/min Minimalan hod za promenu smera: 2,5 mm Vreme zadržavanja pri promeni smera, beskonačno podesivo: 0 - 5 sek Opseg zakretanja: 11 stepeni Poprečni klizač: Hod ručnog točka (fino/grubo): 220 mm Hod po okretu ručnog točka grubo/fino: 8 / 1 mm/prečnik Podeljak na ručnom točku: 5 µm/prečnik Podeljak sa mikro podešavanjem: 1 µm/prečnik Brzo približavanje i povratak, hidraulički: 40 mm Hidrauličko pomeranje: 0,95 mm/prečnik Uradno brušenje: brzina pomeranja: 0,25 - 25 µm/sek Uzdužno brušenje: količina pomeranja po promeni smera stola: 1-30 µm/prečnik Glava brusne vretena: Brusni točak za spoljašnje kružno brušenje: 400 x 50 x 127 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 - Splash guard for above - Tailstock with micrometer adjustment, MK4 - Internal grinding device with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842 incl. grinding arbors (4 pieces of your choice) - HJNZ 42 chuck - Oil mist lubrication unit for HJN spindles - STREULI magnetic paper band filter system, type SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes - Sine bar on the workpiece headstock including alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet device for Schaublin collets B32 - Set of collets B32, D: 1.0-30.0 mm, steps of 0.5 mm (59 pieces) - Dial gauge stop for table swivelling with dial gauge 0.01 mm - Table fixed stop - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic upper table compensation - Swivelling dressing device for external, face, or internal grinding - Set of vibration-damping pads - New three-tone paint (light grey RAL 7035/blue RAL 5012/dark grey RAL 7016) Iedpfsyf E Suox Acrsaw - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity Machine is currently being overhauled, images shown are sample photos!

Stanje: rabljeno, Leto izdelave: 1980, Krožna brusilnica (za notranje in zunanje brušenje) KELLENBERGER 1000 U-175, št. 32460-2247, letnik 1980, največja dolžina brušenja 1.000 mm, največji premer 350 mm. Iaodpfx Aszlpr Djcrsw