Kallesoe Stiskalnica Za Lepilo Z Aplikatorjem Za Lepilo nakup rabljenega (97.815)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z dvojnim stolpcem
O.S.G.T20 CE
Pokliči
Stanje: rabljeno, Technical Details:
Press force: 20 t
Ram stroke: 6 - 60 mm
Throat depth: 176 mm
Ram adjustment: 55 mm
Strokes per minute: 155 spm
Distance table/ram: 270 mm
Clear inside width: 470 mm
Table dimensions: 300 x 450 mm
Table pass-through opening: 90 mm
Ram clamping surface: 130 x 248 mm
Inclination: 28°
Ram bore (slot): 25 x 65 mm
Cedpsu Nfliofx Akrorc
Table height above floor: 775 mm
Required air pressure: 5.5 - 6 bar
Total power requirement: 3.5 kW
Machine weight approx.: 1.0 t
Machine dimensions (LxWxH) approx.: 1.3 x 1.1 x 1.95 m
High-performance press
Centralized lubrication
with monitored light curtain (Linuflex)
Stroke counter (counter mechanism)
Additionally, a steel plate 315 x 400 x 50 mm with center hole Ø 63 mm included
Mali oglas
Nemčija
614 km
Sistem za hlajenje z vodo
EMKKS 160L-4
Pokliči
Stanje: rabljeno, Technical details:
Crjdpfsu N Afyjx Akrec
Voltage: 360–730 V / 50 Hz
Approximate machine weight: 0.150 t
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z enim stolpcem
WMW ERFURTPEE 400-I
Pokliči
Stanje: rabljeno, Leto izdelave: 1980, Technical details:
Pressing force: 400 t
Stroke: 40 - 140 mm
Strokes/min, continuous: 32
Throat depth: 400 mm
Shut height, min/max: 450/590 mm
Ram adjustment: 125 mm
Table size: 1250 x 750 mm
Height above floor: 1130 mm
Total power requirement: approx. 31.5 kW
Machine weight, approx.: 23.0 t
Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m
Credpou N A Uusfx Akrsc
Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m
Additional features:
- Clamping plate L:1260 x W:760 x H:100 mm
- Equipped with drawing device, force: 250 kN, stroke approx. 83 mm
- Operation via control panel
No UVV (accident prevention regulations)
In operation.
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z enim stolpcem
WMW ERFURTPEE 160-III
Pokliči
Stanje: rabljeno, Leto izdelave: 1980, Détails techniques :
Pression : 160 t
Course : 20-160 mm
Profondeur de col de cygne : 400 mm
Réglage du coulisseau : 120 mm
Nombre de courses : 71 cp/min
Hauteur d'installation table/coulisseau en haut : 720 mm (course 160 mm)
Hauteur d'installation table/coulisseau en bas : 560 mm (course 160 mm)
Surface du coulisseau : 900 x 660 mm
Passage entre les montants : 500 x 450 mm
Surface de la table (LxlxØ) : 1200 x 750 x 100 mm
Puissance totale requise : env. 23,0 kW
Poids de la machine env. : 15,0 t
Dimensions de la machine (LxlxH) : 2,7 x 1,5 x 3,45 m
Dimensions de l'armoire électrique (LxlxH) : 2,0 x 0,65 x 2,15 m
Commande via pupitre/pupitre sur pied/pédale et boîtier de commande manuel.
La presse peut être proposée selon deux options :
1ère option :
Vente en l'état, non raccordée, non complète, non fonctionnelle.
2ème option :
La presse est remise à neuf, toutes les pièces sont remplacées, rénovées et contrôlées. La presse est entièrement révisée.
Codpfeu N A U Iex Akrjrc
Pour toute demande concernant cette presse, veuillez indiquer l'option d'offre souhaitée !
i. D.
Mali oglas
Leipzig
614 km
Ekscentrična stiskalnica z dvojnim stolpcem
TACI ARRASATEPSR 100
Pokliči
Stanje: rabljeno, Leto izdelave: 1985, Technical details:
Pressure: 100 t
Stroke rate: 35-100 strokes/min
Throat depth: 360 mm
Ram adjustment: 20-130 mm
Ram surface: 750x550 mm
Clamping plate on table: 1000x640 mm
Stroke adjustment: 90 mm
Clearance between uprights (longitudinal/lateral): 610x500 / 440x550 mm
Shut height (table/ram bottom): 300 mm
Total power requirement: 17.5 kW
Csdpfxsu Nfh De Akrjrc
Machine weight approx.: 7.0 t
Machine dimensions approx. LxWxH: 1.9x1.4x2.7 m
- The ram plate is equipped with 5 longitudinal T-slots
- Center hole = 50 mm
This press is currently for sale without control system.
Completion to customer specification available as an option.
i.e.
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z enim stolpcem
TACI ARRASATEPR. 90
Pokliči
Stanje: rabljeno, Tehnične podrobnosti:
Tlak: 90 t
Izvenje: 320 mm
Število hodov: 90 hodov/min
Vgradna višina: miza/beran zgoraj: cca 380 mm
Crodpfx Akou Nfg Hsroc
Nastavitev berana: max. 65 mm
Površina berana: 600x55 mm
Vpenjalna plošča na mizi: 800x640x80 mm
Prehod: 260x160 mm
Nastavitev hoda: 60 mm fiksno
Skupna priključna moč: 5,5 kW
Teža stroja pribl.: 4500 kg
Potrebni prostor pribl.: D:1,8xŠ:0,82xV:2,42 m
- Posamezni/kontinuirani hod
- Redni pregledi izvedeni, prenovljen 2010
- Trenutno brez krmilne omare, brez krmiljenja, brez tlačne posode
*
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z dvojnim stolpcem
SCHULERP2ESs 125
Pokliči
Stanje: rabljeno, Leto izdelave: 1964, Technical Details:
Press Force: 125 t
Stroke: 28 mm
Number of Strokes: 56–225 strokes/min
Clearance Between Uprights: 1000 mm
Ram Adjustment: 60 mm
Distance Table/Ram: 376 mm
Table Size: W 950 x D 720 mm
Through-Opening in Table: 400 x 130 mm
Height Above Floor: 1120 mm
Ram Area: 920 x 540 mm
Ram Bore: Ø 65 x 120 mm
Lateral Frame Passage: 250 mm
Crodpeu Nfibofx Akrec
Total Power Requirement: 30 kW
Machine Weight approx.: 15.5 t
Machine Dimensions: 3.1 x 1.34 x 3.6 m
Control Cabinet Dimensions (LxWxH): 0.64 x 0.22 x 1.2 m
This press is a high-performance machine designed for large-scale serial production.
Features a mechanical feeder for material input on the left side and a scrap shear on the right side. Feed length = 0–200 mm; Roller width = 250 mm
Partially supplied with an operating manual (copy).
Machine is not operational!
As is.
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z enim stolpcem
BEUTLERPDR 100
Pokliči
Stanje: rabljeno, Leto izdelave: 1983, Technical details:
Pressure: 100 t
Stroke: 20 mm fixed
Strokes per minute: 55
Crsdpfeu Nfi Uex Akrjc
Table surface: 900x640 mm
Throat depth: 355 mm
Ram adjustment: 150 mm
Pin hole in ram: Ø 36 mm
Ram clamping surface: 500x415 mm
Height above floor level: 800 mm
Max. distance between table and ram: 390 mm
Die opening in table: Ø 330 mm
Total power requirement: 11 kW
Machine weight approx.: 7.5 t
Transport dimensions (LxWxH): 1.9x1.6x3.1 m
Press is without machine control panel/control cabinet (installation optional).
Complete electric separate drive for 3x 380 Volts, 50 Hz
Belt and ram guard
Friction clutch and brake unit PRESSMATIC
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z enim stolpcem
AMBOLDEVSP 55
Pokliči
Stanje: rabljeno, Leto izdelave: 1969, Tehnični podatki:
Credpfx Akjxu Dwmsrsc
Tlak: 55 t
Iztek: 250 mm
Število hodov: 120 hodov/min
Vgradna višina: miza/bata zgoraj: 380 mm
Nastavitev bata: 55 mm
Debelina pločevine pri prehodnem hodu: 2,25 mm
Območje hoda bata: 6 - 90 mm
Skupna potrebna moč: 8,8 kW
Približna masa stroja: 2,75 t
Dimenzije D x Š x V: 1,4 x 1,2 x 2,2 m
Mali oglas
Nemčija
614 km
Ekscentrična stiskalnica z enim stolpcem
WMWPEE II 160
Pokliči
Stanje: rabljeno, Tehnične podrobnosti:
Pritisk: 160 t
Izvitek: 760 mm
Hod bata: 32...140 mm
Razdalja med mizo in batom: 400 mm
Nastavitev bata: 100 mm
Število hodov: 50 hodov/min
Miza: 760x1000x95 mm
Prehodna odprtina v mizi: 400x350 mm
Vpenjalna površina bata: 630x850 mm
Vpenjalna plošča: 760x1010x92 mm
Skupna potreba po moči: 15 kW
Teža stroja pribl.: 6,2 t
Dimenzije stroja pribl. D x Š x V: 2,9x1,2x3,4 m
Dimenzije elektro omare D x Š x V: 0,8x0,45x2,1 m
Upravljanje preko dvomičnega upravljanja
Stroj je možno demonstrirati.
i.D.
Crjdpfxeu Nfhqo Akrsc
*
Mali oglas
Nemčija
614 km
Hladna stiskalnica za oblikovanje
KUHNE MASCHINENBAUKEPK-1
Pokliči
Stanje: rabljeno, Tehnične podrobnosti:
Dolžina stebla: maks. 30 mm
Zmogljivost: 600 kos/min
Največji premer žice: 5 mm
Delovno območje: 30 mm
Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m
Dimenzije stroja: 2,95x1,5x2,15 m
Dimenzije odvijalnika: 1,15x1,15x1,15 m
Mehanska stiskalnica za hladno preoblikovanje
Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca)
Naprava je posebna izvedba in neuporabljena (kot nova).
Pribor:
- odvijalnik
- navodila za uporabo
Stroj je možno prikazati v obratovanju.
Cjdju Nfrcjpfx Akrsrc
i.D.
Mali oglas
Hofkirchen im Mühlkreis
275 km
Stroj za vrtanje stekla z dvojno glavo
MetralTD3
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, moč: 2,5 kW (3,40 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, skupna širina: 24.000 mm, skupna dolžina: 52.000 mm, skupna višina: 10.500 mm, skupna masa: 2.000 kg, zračni tlak: 6 letvica, priključek za stisnjen zrak: 6 letvica, premer vrtanja: 180 mm, delovna višina: 1.050 mm, 8. Sept. | Bohrmaschinen
METRAL Doppelkopf-Bohrmaschine TD3-2000, Baujahr 2003, 2023 komplett überholt
Technische Daten:
Glasstärke: 2–50 mm
Bohrdurchmesser: 3–180 mm
Cjdpfx Ajrg E Hcekrerc
Gewicht ohne Rollentisch: 775 kg
Anschlussleistung: 2,5 kW
Abmessungen ohne Rollentisch: 1,3 x 1,7 x 1,2 m
Abmessungen Rollentisch: 5,2 x 2,4 m / Höhe 1050 mm / ±25 mm
Maximaler Abstand Maschinenrahmen zu Bohrzentrum:
Mali oglas
Haar
330 km
Linija za granuliranje kablov z predhodnim drobilnikom
GuidettiSincro 530 Mill + PMG-H 900
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-Shredder PMG-H 900 – immediately available – as new
For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of:
• Guidetti Sincro Mill 530 cable granulation unit
• Guidetti PMG-H 900 pre-shredder
• External filtration unit
The system was installed at a customer's site, tested, and subsequently properly dismantled. Due to a project change, the plant is now being offered.
Condition: nearly new (test operation only)
Availability: immediately from stock – no lead time
Price: attractive cost-saving compared to new equipment
—
Special advantages:
• Immediately available – no months-long lead times as with new machines
• Only used for test runs – correspondingly minimal wear
• Complete system incl. pre-shredder
• Proven Guidetti technology
—
Description:
The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminium cables – no pre-sorting required.
The system includes:
• Granulator (cutting mill)
• Zig-zag separator
• Turbine for fine grinding
• Dry separation table
Material purity up to 99%.
In combination with the PMG-H 900 pre-shredder, this produces a powerful recycling line for industrial applications.
—
Technical data Sincro Mill 530:
• Throughput: 450 – 600 kg/h
• Motor power: 53 kW
• Dimensions (L x W x H): 3410 x 1515 x 4395 mm
• Weight: approx. 2,700 kg
• For processing copper and aluminium cables
Crjdpoy Ahlyjfx Akrsc
—
Technical data Pre-Shredder PMG-H 900:
• Power: approx. 38.5 kW
• Dimensions (L x W x H): 2110 x 2070 x 2245 mm
• Weight: approx. 2,840 kg
Suitable for pre-shredding cables, non-ferrous metals, and plastics.
—
Note:
The system is available at short notice. Subject to prior sale.
Viewing possible by arrangement.
Mali oglas
Bretzfeld
536 km
Stiskalnica za furnir
JOOSunbekannt
Pokliči
Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm
Odpiralna širina: 300 mm
Cedpfx Akjy Ty E Tjrerc
Število etaž: 1 kos
Teža stroja ca. 3 t
Leto izdelave: neznano
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 180
Pokliči
Stanje: novo, Leto izdelave: 2026, Availability upon request
Very robust machine with high pressing force
- also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size.
Our best-selling briquetting press series
+ Proven, simple technology, ensuring extremely low susceptibility to failure
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent value for money
Optional demonstration cooling unit surcharge: + €4,980 net
(can also be retrofitted later)
* Cools the press clamp (important from 4 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular operation exceeding 4 hours continuously
Commodity code: 84793010
Briquette diameter: 70 mm
Front sleeve: 125 mm
Max. briquetting stroke: 100 mm
Optimal briquetting stroke: 80 mm
Capacity (material-dependent): up to 150 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor output: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2,095 mm
Width: 1,300 mm
*with large chamber 1,600 mm
Height: 1,700 mm
Weight: 1,250 kg
Crsdpfed Nm Sisx Akrsc
Oil volume: 220 liters
Silo diameter: 1,200 mm
Silo capacity: approx. 1 m³
Pump: 75 liters
Hydraulic pre-compressor
Press clamp cooling option: yes, with optional coolable press clamp
Hydraulic oil cooling option: yes
Cooling of press clamp and hydraulic oil possible with optional cooling unit
Level monitoring option: yes
Continuous strand briquette option: yes (material-dependent)
Enlarged filling slider option: yes, with optional enlarged filling slider
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: heated room with at least +5°C
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP 60
Pokliči
Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice.
+ Proven, simple technology for extremely low failure rates
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Outstanding price-performance ratio
Optional extras (available at additional cost):
*Surcharge for fill level sensor, enabling automatic operation:
+ €995 net
*Surcharge for large pre-compression chamber + €970
(Recommended for very light materials such as straw, increases machine width by 13 cm)
Briquette diameter: 50 mm
Front bushing: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput (material dependent): up to 60 kg/h*
*Depending on bulk density
*Based on a bulk density of 200 kg/m³
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1,680 mm
Width: 1,100 mm
Height: 1,500 mm
Weight: 680 kg
Crjdpfx Aogl Nlmokrec
Oil volume: 110 liters
Silo diameter: 1,000 mm
Silo capacity: approx. 0.7 m³
Pump output: 37 liters
Hydraulic pre-compressor
Press tongs cooling option: No
Hydraulic oil cooling option: Yes
Fill level monitoring option: Yes
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and max. 18%
- Maximum chip length 15 mm
- Installation temperature: Tempered room, at least +5°C
- Customer must provide protection against hydraulic oil loss
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
mütek SystemtechnikMGP 60
Pokliči
Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj!
Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa
Zmogljivost: do največ 60 kg/h
Briket: 50 mm valjaste oblike
Motor: 5,5 kW
Dimenzije: 1.900 x 1.350 x 1.410 mm
Teža: pribl. 860 kg.
Cjdpfx Aksv Rpxljrerc
Zahteve:
Izhodni material idealno krajši od 25 mm dolžine ostružkov
Vsebnost vlage 6–12 % ATRO
Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd.
Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.
Mali oglas
Neckartailfingen
511 km
Briketna stiskalnica Briketna stiskalnica za aluminij
mütekMPP NEM 300
Pokliči
Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months
---
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continual development, and expertise
+ Several hundred machines in operation with satisfied customers
+ Excellent price-performance ratio
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material.
The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette.
Advantages of briquette production include:
• Volume reduction of up to 90%
Crodpfx Aochqxxekrsc
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable sale
--
Briquetting Press NEM 300
Throughput approx. up to 200 kg per hour (highly depending on material).
- In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion.
- In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion.
Technical specifications:
Motor: 7.5 kW (+ 0.55 kW on the cooler)
400 Volt / 50 Hz / 3-phase
Front bushing: 125 mm
Max. briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Pump: 80 liters
Storage hopper approx. 0.5 m³ capacity (extendable)
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price
Machine available immediately (ex works Neckartailfingen)
Demonstration unit
Your benefits:
+ Very robust, simple technology
+ Excellent price/performance ratio
+ Suitable for continuous operation
+ Proven, well-functioning and established machine over many years
Includes control cabinet with timer operation
The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: 30/35 mm (square)
Briquette length: 5–35 mm (depending on material)
Throughput capacity: up to max. 25 kg/h (depending on material)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Crsdpsfci D Aefx Akroc
Motor: 2.2 kW, 400 V – 50 Hz
Noise emission: 62 dB
Raw material requirements:
• Wood shavings and dust less than 15 mm in length
• Moisture content less than 15% ATRO
• Sand, stones, metals, and minerals increase wear
---
Options at extra cost:
-Timer function + €490 net
Machine is started manually and switches off automatically after the set time X.
-Fill level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW!!! Now also available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €690 net (delivery time approx. 8 weeks)
---
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP NEM 900
Pokliči
Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below
* Production time approx. +/- 6 months
The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%.
The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material.
The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected.
The more homogeneous the input material, the more uniform the briquette lengths.
Advantages of briquette production include:
- Volume reduction by up to 90%
- Emulsion recovery
- Cost savings on storage and transport
- Economical disposal
- Profitable resale
Crjdpfx Akegfm Ryerjc
Briquetting Press NEM 900:
For briquetting aluminum chips
Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm)
Last test with aluminum chips < 18 mm: approx. 260 kg/h
*More details available after a free test with your material.
Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm
Technical data:
Total connected load: approx. 31 kW
Continuous operation: approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 litres per minute
Silo: 1 m³
Silo diameter: 1200 mm
Including agitator
Oil tank: 600 litres
Dimensions (LxWxH): 2500 x 1700 x 1730 mm
Weight: 2250 kg
Hydraulic pre-compaction via ram
Main press cylinder
Vertical cylinder
Prepared for connection to a cooling unit
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
R 200
Pokliči
Stanje: dober (rabljeno), Good, used condition
Crsdpfxst Hxude Akrsc
Main motor: 11 kW
Throughput up to max. 200 kg/h
Year of manufacture: 12/2008 / Technically inspected in 01/2025
Briquette size: 150x60 mm
*Used machine, sold as seen
Functionality guaranteed upon handover
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 280
Pokliči
Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement
Very robust machine with high pressing force
- Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible.
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
Crodpfxsxfwdo Akroc
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio
Surcharge for cooling unit + €4,995 net (can also be retrofitted later)
* Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause)
Briquette diameter: 80 mm
Front bush: 125 mm
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Throughput (depending on material): up to 200 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo capacity: approx. 1 cbm
Pump: 75 liters
Hydraulic pre-compressor
Press jaw cooling option: yes, with special accessory coolable press jaw
Hydraulic oil cooling option: yes
Cooling of press jaw and hydraulic oil with cooling unit (special accessory)
Fill level monitoring option: yes
Continuous briquette option: yes (material dependent)
Enlarged filling slider option: yes, with special accessory enlarged filling slider
CE compliant
Requirements for raw material:
- The moisture content (atro) must be at least 6% and not exceed 18%
- Maximum chip length 20 mm
- Installation temperature: heated environment, at least +5°C
- The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUF4/3700/60x40
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke
Izjemno visok pritisk stiskanja: 3.700 kg/cm²
Velik lijak: 600 x 1500 mm
Format briketa: 60 x 40 mm
Csdpfjw Ig Suox Akrjrc
Zmogljivost:
Aluminijevi ostružki – do 70 kg/h
Jekleni ostružki – do 180 kg/h
Medeninski ostružki – do 220 kg/h
*odvisno od vhodnega materiala in nastavitev
Vključeno:
- Kad za emulzijo
- Črpalka za emulzijo
- Oljni hladilnik
Mali oglas
Neckartailfingen
511 km
Briketirna stiskalnica Briketirna stiskalnica za aluminij
mütekMPP NEM 90
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new
only 704 operating hours
Codpod N Dnhjfx Akrsrc
Special price for lightly used demonstration machine
Base machine: €29,990 net
Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
Throughput capacity: up to max. 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 Volt / 50 Hz / 3 phase,
Pump: 40 litres
Max. briquette length: 50 mm,
Optimal briquette length: 40 mm,
Silo diameter: 1,000 mm,
Oil tank: 110 litres
Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder
Fill level sensor: yes
Requirements for the input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg
- The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUFRB4/1600/80
Pokliči
Stanje: dober (rabljeno), Tehnični podatki:
Briketirni stroj v dobrem stanju
Letnik: 2007
Tehnični pregled v 06/2025
Cilindrična briketa 80 mm
Pretok do največ 150 kg/h
*le približno 3.949 delovnih ur
- Hidravlična preša: briketirni stroj z izmetno stezo
- Hidravlična enota: 4 kW
- Tlak: maks. 300 bar
- Transportne dimenzije: 1585/2140/H1940 mm
Csdpfx Akswtdk Tjrorc
- Teža: 1370 kg
Garancija delovanja ob prevzemu
Z veseljem omogočamo brezplačen preizkus!
Olajšamo vam iskanje: "kallesoe stiskalnica za lepilo z aplikatorjem za lepilo"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.










































































































































































































