Hesse By Lfss Hnm-4 F nakup rabljenega (81.896)

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Turčija Cena 6.600 € Leasing obrok 127,38 € Največja debelina pločevine - konstrukcijsko jeklo 4 mm Izvlek 200 mm Valovna dolžina 300 nm Število orodij 4 kosi Premer valja 126 mm Hitrost vrtenja 10 1/min Dolžina 1475 mm Širina 550 mm Višina 1200 mm Teža 460 kg Samozaviralni reduktorski motor Nožno stikalo za vožnjo naprej/nazaj Nastavljiva spodnja valja Jekleni valji z bronastimi ležaji 4 kompleti valjev Podstavek Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Credpfxeynm Nge Aplob Oprema v skladu s CE predpisi ALTERNATIVA: Različica HIBKS 4,0 z hidravličnim nastavljanjem zgornjega valja 9.100 €

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 27.800 € Leasing obrok 530,98 € Dolžina upogibanja 3030 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Maks. debelina pločevine brez pred-upogibanja - konstrukcijsko jeklo 4 mm Maks. debelina pločevine s pred-upogibanjem - konstrukcijsko jeklo 2 mm Premer zgornjega valja 180 mm Moč motorja 4 kW Dolžina 4600 mm Širina 1120 mm Višina 1020 mm Teža 4250 kg 3 valji Asimetrična razporeditev valjev - s pred-upogibanjem 2 gnana valja Motorizirano nastavljanje stranskega in pritiskalnega valja Digitalni prikaz položaja stranskega in pritiskalnega valja Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Kaljeni valji Premična upravljalna plošča Crodpfx Aoynm Ezspljb Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna slika)

Stanje: novo, Condition: New Codpfsynm Eujx Aplorb Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: Crjdpfx Aoynm Enspleb The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Credsynm Ehspfx Apljb Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Crjdpfxoynm Ebo Aplob Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Csdpfoynm D Rjx Apljrb Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Turčija Cena 12.700 € Leasing rata 243,84 € Dolžina upogibanja 1270 mm Maks. upogibna zmogljivost – konstrukcijsko jeklo 5 mm Premer zgornjega valja 140 mm Hitrost valjanja 3,5 m/min Moč motorja 2,2 kW Dolžina 2470 mm Crsdpfoynm Dwox Aplsb Širina 750 mm Višina 1000 mm Teža 1350 kg 3 valji Asimetrična razporeditev valjev – z predupogibanjem 2 pogonska valja prek zavornega motorja Ročno nastavljanje stranskih valjev Zgornji valj se nagne naprej Delovanje naprej/nazaj Konusno valjanje z nagibanjem zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI: Kaljeni valji Motorizirano nastavljanje stranskih valjev Digitalni prikaz položaja stranskih valjev

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €74,800 Lease payment: €1,413.72/month Pressing force: 40 tons Bending length: 2,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 200 mm Distance between uprights: 1,700 mm Throat depth (side frame): 350 mm Installation height: 440 mm Drive system: servo motor-driven spindle Rapid traverse (Y axis): 180 mm/s Working speed (Y axis): 10 mm/s Return speed (Y axis): 115 mm/s Backgauge travel range (X axis): 650 mm Backgauge travel range (R axis): 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 2,600 mm Width: 1,450 mm Height: 2,650 mm Weight: 4,400 kg STANDARD EQUIPMENT: Codpfxoynm A Ho Aplerb - Servo-driven spindle drive - 4 axes (Y1, Y2, X, and R) - Color graphics controller DELEM DA-66S • 17" color touchscreen • 3D visualization in simulation and production • Suitable for full Windows applications • Compatible with Delem Modusys • USB and peripheral interface • User-specific application support • Sensor, bending, and correction interface - Servo-driven backgauge on linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and gooseneck - 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Low energy consumption - Compact spindle drive unit with a low number of individual components - No hydraulic components Options: - Z1/Z2 axes - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, Condition new Delivery time approx. 12 - 14 weeks from order Country of origin Turkey Price €72,300 Leasing rate €1,366.47 Press force 40 t Bending length 1250 mm Axes Y1 / Y2 / X and R axis Stroke 200 mm Distance between uprights 1050 mm Throat depth (side frame) 250 mm Installation height 440 mm Drive concept: servo spindle drive Rapid traverse Y-axis 115 mm/s Working speed Y-axis 10 mm/s Return speed Y-axis 115 mm/s Backgauge travel X-axis 650 mm Backgauge travel R-axis 250 mm Table height 1000 mm Motor output 7.2 kW Length 1950 mm Width 1450 mm Height 2650 mm Weight 3600 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X and R) - Color graphic control DELEM DA-66S - 17" color touchscreen - 3D visualization in simulation and production - Suitable for full Windows applications - Compatible with DelemModusys Crodpfxoynm Ayj Apljb - USB and peripheral interface - Custom application support - Sensor, bending, and correction interface - Servo-driven backgauge with linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and goosenecked - 4-way bottom die block 60x60 2009 (V= 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS, mounted on upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity compared to traditional hydraulic press brakes due to almost delay-free response to the foot pedal signal - Lower energy consumption - Compact drive spindle unit with a low number of components - No hydraulic components Options: - Z1/Z2 axes - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-release clamping lever for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Codpeynm Amsfx Aplorb Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Crsdpjynmzpjfx Aplsb Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing Codpfx Apeynmylelerb 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Codpfjynmyfex Aplsrb Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended Crodpfx Apjynmx Isljb

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH Crjdpfoynmxnox Apleb ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Leto izdelave: 2023, Stanje: novo Leto izdelave: 2023 Številka zaloge: 8286 Dobavni rok: takoj, možna vmesna prodaja Država porekla: Turčija Cena: 2990 € Na zalogi: 1 Dolžina upogibanja: 2040 mm Debelina pločevine (420 N/mm²): 0,8 mm Maks. kot upogiba: 70° Dolžina: 2400 mm Širina: 750 mm Višina: 850 mm Teža: 290 kg Csdpfx Apeynmxbolerb Neprekinjena ravna zgornja tirnica Na kolesih Ročni rezalni aparat

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrag Ursprungsland Türkei Preis 22.300 € Leasingrate 428,16 € Biegelänge 1.550 mm Max. Biegekapazität – Baustahl: 4,5 mm Max. Blechstärke ohne Anbiegung – Baustahl: 4,5 mm Max. Blechstärke mit Anbiegung – Baustahl: 3,5 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze: 4,5 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwalze: 3,5 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalze: 3,5 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalze: 2,5 mm Oberwalzendurchmesser: 130 mm Unterwalzendurchmesser: 130 mm Seitenwalzendurchmesser: 130 mm Rollgeschwindigkeit: 5 m/min Länge: 3.300 mm Breite: 1.150 mm Höhe: 1.110 mm Gewicht: 2.370 kg Motorischer Walzenantrieb Crodpfx Aeynmwdopljb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država izvora: Turčija Cena: 16.000 € Leasing rata: 307,2 € Dolžina upogibanja: 2050 mm Maks. zmogljivost upogibanja (konstrukcijsko jeklo): 4 mm Crsdpfx Apsynmv Tjleb Premer zgornjega valja: 140 mm Moč motorja: 2,2 kW Dolžina: 3200 mm Širina: 750 mm Višina: 1000 mm Teža: 1650 kg 3 valji Asimetrična razporeditev valjev – z predupogibanjem 2 pogonska valja preko zavornega motorja Ročna nastavitev stranskih valjev Zgornji valj se lahko izmenično nagne naprej Obratovanje naprej/nazaj Konusno valjanje s poševno nastavitvijo zadnjih valjev Premična upravljalna konzola MOŽNOSTI: Kaljeni valji Motorizirana nastavitev stranskih valjev Digitalni prikaz položaja stranskih valjev (Simb. fotografija)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €269,588 Laser power: 3 kW Cjdpfjx U Elnjx Aplsrb Table type: Shuttle table Max. sheet thickness - Mild steel: 16 mm Max. sheet thickness - Stainless steel: 8 mm Max. sheet thickness - Aluminium: 8 mm Max. sheet thickness - Copper: 5 mm Max. sheet thickness - Brass: 8 mm Total connected load: 29.9 kW (with extraction) Cutting area: 6100 x 2070 mm X-axis: 6100 mm Y-axis: 2070 mm Z-axis: 125 mm Max. sheet size: 6096 x 2032 mm Max. sheet weight: 240 kg/m² (for 3 - 12 kW) / 400 kg/m² Max. total weight for double table: 5800 kg (for 3 - 12 kW) / 960 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 42 s The HD-FN is equipped with two tables that are automatically exchanged, enabling simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, providing optimal accessibility for optional loading and unloading systems. Control, laser source and cooling are fully integrated within the system. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinal position for optimal access to optional loading/unloading systems) - Enclosed cutting chamber with protective glazing - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Lantek for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap box - Work area lighting - Multi-chamber extraction system - Light barrier protection for shuttle table - Remote maintenance access - Air conditioning for control cabinet - Equipped according to CE regulations ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steel S235 20 25 30 35 40 Stainless steel 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass (CuZn39Pb3) 10 12 20 20 20 OPTIONS: - Extraction with filter unit - Automatic nozzle changer

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €174,688 Leasing rate: €3,301.60 Laser power: 3 kW Manual table / Shuttle table: Manual table Max. sheet thickness – Mild steel: 16 mm Max. sheet thickness – Stainless steel: 8 mm Max. sheet thickness – Aluminium: 8 mm Max. sheet thickness – Copper: 5 mm Max. sheet thickness – Brass: 8 mm Cutting area: 3060 x 1530 mm X-axis: 3060 mm Y-axis: 1530 mm Z-axis: 140 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 160 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm The HD-FO is our compact entry-level model. Control system, laser source, and chiller are integrated into the machine to keep the overall dimensions as compact as possible. The manually extendable table is moved out laterally for loading and unloading. The cutting head features automatic focus adjustment. This makes the system a particularly economical, fast, and very easy-to-operate production machine. The system includes the following components: - Manual loading and unloading table - Enclosed cutting chamber with protective glass - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Latek for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Air conditioning for control cabinet Codpfx Apex U Elholorb - Equipped in accordance with CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW -----|-----|----- Mild steel S235 | 20 | 25 Stainless steel (304) | 10 | 15 Aluminium (5083) | 12 | 20 Copper | 6 | 10 Brass (CuZn39 Pb3) | 10 | 12 OPTIONS: - Extraction with filter unit - Shuttle table

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €188,488 Leasing rate: €3,562.42 Laser power: 3 kW Manual table / shuttle table: Shuttle table Max. sheet thickness – mild steel: 16 mm Codpsx U Elbefx Aplorb Max. sheet thickness – stainless steel: 8 mm Max. sheet thickness – aluminium: 8 mm Max. sheet thickness – copper: 5 mm Max. sheet thickness – brass: 8 mm Total connected load: 26.4 kW (with extraction) Cutting area: 3,100 x 1,525 mm X-axis: 3,100 mm Y-axis: 1,525 mm Z-axis: 125 mm Max. sheet size: 3,084 x 1,524 mm Max. sheet weight: 240 kg (for 3–12 kW) / 400 kg/m² Max. total weight for double table: 2,200 kg (for 3–12 kW) / 360 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table changeover time: 25 s The HD-FN features two tables that are automatically exchanged in alternation, allowing for simultaneous cutting and loading/unloading operations. The shuttle table is positioned longitudinally, providing optimum accessibility for optional loading and unloading systems. Control, laser source, and cooling system are integrated into the unit. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinally positioned for best accessibility for optional loading/unloading systems) - Enclosed cutting area with protective glass - CNC graphic control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - Lantek CAD/CAM software for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap bin - Work area lighting - Multi-chamber extraction system - Light barrier protection for the shuttle table - Remote maintenance access - Control cabinet air conditioning - Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW | 12 kW | 15 kW | 20 kW -----|-----|-----|-----|-----|----- Mild steel S235 | 20 | 25 | 30 | 35 | 40 Stainless steel (304) | 10 | 15 | 25 | 35 | 40 Aluminium (5083) | 12 | 20 | 30 | 35 | 40 Copper | 6 | 10 | 15 | 15 | 15 Brass (CuZn39 Pb3) | 10 | 12 | 20 | 20 | 20 OPTIONS: - Extraction with filter unit - Sheet handling systems - Automatic nozzle changer

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080091 Delivery: Immediate, subject to prior sale Country of origin: Turkey Price: €51,120 Leasing rate: €966.17 Available: 1 unit Press force: 60 t Bending length: 2,550 mm Axes: Y1 / Y2 and X Axis Stroke: 160 mm Distance between uprights: 2,150 mm Throat depth: 250 mm Installation height: 350 mm Drive system: Hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 70 mm/s Backgauge travel X-axis: 620 mm (optional R-axis available) Backgauge speed X-axis: 250 mm/s Table height: 813 mm Table width: 104 mm Oil tank: 100 l Motor power: 5.5 kW Length: 3,250 mm Width: 1,200 mm Height: 2,350 mm Weight: 4,250 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10 - 10" 2D graphic display - Intuitive touch-screen operation (easy finger drawing of bend contours) - User-friendly dialogue programming - Automatic calculation of bending sequence - Automatic calculation of flat length for blank cutting - Graphic product and tool memory - Correction function - USB ports for backup and program transfer - PC software for program creation on PC and transfer to machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning device in the table Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill Operating manual in GERMAN or ENGLISH (Symbol photo shows model PBF 30200) ADVANTAGES OF THE PBF SERIES: - Compact design - Economical model thanks to series production of standardized models, with no compromise on quality or accuracy OPTIONS: CNC-controlled R-axis (X travel range = 500 mm) Credpewva Igefx Apleb DBend, 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €94,120 Leasing rate: €1,778.87 Press force: 175 t Bending length: 4050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between frames: 3600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: Hydraulic Rapid traverse (Y-axis): 160 mm/s Working speed (Y-axis): 10 mm/s Return speed (Y-axis): 140 mm/s Backgauge speed (X-axis): 500 mm/s Backgauge speed (R-axis): 350 mm/s Backgauge travel (R-axis): 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 5250 mm Width: 1700 mm Height: 2850 mm Weight: 12,780 kg 3 axes (Y1, Y2, X) CNC controller: DT-15 - 15" 2D graphic display - Intuitive touchscreen control (easy contour drawing with finger) - User-friendly dialog programming - Automatic calculation of bending sequence - Automatic calculation of blank size - Graphical product and tool memory - Correction feature - USB interfaces for backup and program transfer - PC software, program creation on PC and transfer to machine via USB Servo-driven backgauge with linear guides and ball screws Backgauge with finger blocks on double linear guides CNC-controlled crowning Top tool 1010 / A / 75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on the upper beam Linearly guided sheet support arms CE-compliant Oil filling User manual in German or English ADVANTAGES OF THE AD-S SERIES: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides - More available options, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls … Options: R-axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (STEP, IGES, and DXF file import) CNC controller SKY22 Crodpfowiqr Nox Apljb CNC controller Delem DA66 S CNC controller Delem DA-69S 3D incl. Profile-S PC software with 3D file import capability Quick-release lever for the top tool

Stanje: novo, Condition new Delivery time approx. 12 - 14 weeks from order Country of origin Slovakia Price 25,400 € Leasing rate 485.14 € Pressing force 40 t Bending length 1250 mm Axes X and Y axis Stroke 100 mm Installation height 310 mm Drive concept hydraulic Oil tank 38 l Motor 6 kW Length 1750 mm Width 950 mm Height 1900 mm Weight 1640 kg Back gauge 420 mm Die 1 Speed 10 mm/s Return speed 12 mm/s Back gauge speed 40 mm/s Press beam accuracy ±0.02 mm Back gauge accuracy ±0.05 mm 2 axes (Y and X) Motorized back gauge with push button and manual fine adjustment with counter Pressing depth Y and upper dead center via pre-selection control Intermediate piece with quick clamping lever for upper tool clamping Upper tool 1010/75/R0.8/105 1x835 mm + 1x835 mm split Credpfswirw Hjx Aplob Die 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm split 2 sheet support arms Equipment according to CE regulations Oil filling Operating manual in GERMAN