Hesse By Lfss Dpm-K 1570-150 nakup rabljenega (52.538)

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €58,200 Leasing rate: €1,099.98 Pressing force: 80 t Nominal pressing force at 4 mm Table length: 600 mm Table width: 900 mm Through-hole in table: 200 mm Stroke: 1 - 110 mm Strokes per minute: 60 Ram guides: 6 Ram adjustment: 80 mm Ram bore: 50 mm Throat depth: 300 mm Installation height: 400 mm Motor: 7.5 kW Length: 1600 mm Width: 1500 mm Height: 2750 mm Weight: 5,700 kg Welded steel frame construction 6-way ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setup mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs Ppsdewiq I Dopfx Agxer 2 free cams for connecting peripheral devices Automatic central lubrication Equipment in accordance with CE regulations (Sample images) OPTIONS: Vibration pads: €192.00 T-slot plate: on request Hydraulic overload protection: on request etc.

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks after order Country of origin: Turkey Price: €92,600 Leasing rate: €1,750.14 Pressing force: 160 t Nominal pressing force at 6 mm Table length: 750 mm Table width: 1100 mm Drop-through hole in table: 230 mm Stroke: 1 - 172 mm Strokes per minute: 45 1/min Ram guides: 6 Ram adjustment: 100 mm Pin hole in ram: 80 mm Throat depth: 375 mm Installation height: 540 mm Motor: 11 kW Length: 1,890 mm Width: 1,950 mm Height: 3,650 mm Weight: 15,500 kg Welded steel frame construction 6-way ram guidance Pneumatic clutch-brake combination Safety enclosure with light barrier and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Ppedpfx Agowiqu Rsxor Variable strokes per minute via frequency inverter Operating modes: • Setup mode • Two-hand operation • Foot operation • 2-cycle operation via light barriers • Continuous operation Touchscreen for: • Stroke counter with preselection for continuous operation • Stroke rate adjustment • Lubrication intervals and runtime • Alarm messages • Motor rotation direction • Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipped in accordance with CE regulations Sample photos, illustration incl. optionally available clamping plate OPTIONS: • Vibration pads €192.00 • Clamping plate on request • Hydraulic overload protection on request etc.

Stanje: novo, Condition new Delivery time approx. 14 - 16 weeks from order Country of origin: Turkey Price: €83,200 Leasing rate: €1,572.48 Press force: 130 t Nominal press force at 4.5 mm Table length: 650 mm Table width: 950 mm Table through-hole: 220 mm Stroke: 1 - 132 mm Strokes per minute: 50 Ram guides: 6 Ram adjustment: 95 mm Ram bore: 70 mm Throat depth: 325 mm Installation height: 500 mm Motor: 11 kW Length: 1,800 mm Width: 1,725 mm Height: 3,020 mm Pjdpfxewiqn Rj Agxjpr Weight: 8,000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setting mode * Two-hand activation * Foot pedal activation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for peripheral device integration Automatic central lubrication Equipped according to CE regulations Sample images, shown with optionally available clamping plate OPTIONS: Vibration pads €192.00 Clamping plate on request Hydraulic overload protection on request etc.

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov od naročila Država izvora: Turčija Cena: 10.900 € Leasing obrok: 209,28 € Teža koluta: 1.250 kg Maks. zunanji premer koluta: 1.300 mm Min. notranji premer koluta: 450 - 550 mm Maks. širina koluta: 400 mm Min. širina koluta pri različici s pnevmatično potisno roko: 80 mm Motorizirani pogon Mehansko nastavljiv nastavk koluta s 4 čeljustmi Regulacija hitrosti za odvijanje ter čas pospeševanja in zaviranja Ppodpfowv H Awex Agxjr Fotoelektrični bližinski senzor SICK za kontrolo povešanja S PNEVMATIČNO POTISNO ROKO

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 9740 Dobavni rok: takoj, vmesna prodaja mogoča Država porekla: Turčija Cena: 6.200 € Ppodpfxswiqnwe Agxjr Leasing obrok: 119,66 € Na zalogi: 1 Dolžina upogibanja: 1.050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Moč motorja: 1,1 kW Dolžina: 1.630 mm Širina: 700 mm Višina: 1.200 mm Teža: 480 kg 3 valji Asimetrična postavitev valjev 2 pogonska valja preko zavornega motorja Nastavitev zadnjega valja z ročnim kolesom Reže za žico pri spodnjem in zadnjem valju Zgornji valj v odprtini Desni/levi tek z dvojnim pedalom Naprava za stožčasto valjanje Navodila za uporabo v NEMŠČINI

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €197,600 Leasing rate: €3,734.64 Pressing force: 400 tons Bending length: 6,050 mm Axes: 3 Stroke: 365 mm Distance between frames: 5,100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 8 mm/s Return speed Y-axis: 100 mm/s Backgauge stroke X-axis: 750 mm Backgauge speed X-axis: 350 mm/s Backgauge speed R-axis: 300 mm/s Backgauge stroke R-axis: 250 mm Table height: 1,220 mm Table width: 154 mm Oil tank: 500 l Motor power: 37 kW Length: 7,500 mm Width: 2,110 mm Height: 3,810 mm Weight: 34,660 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 Ppodpfxsyui R Tj Agxsr - 15" 2D graphic display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of blank length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software enables programming also on PC, with subsequent USB transfer to the machine Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and goose-necked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil fill included Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - More stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guide - More available options, such as: additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls… Price FCA Turkey Options (prices on request): R-Axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC Control Delem DA66 S DA-69S 3D incl. PC software Profile-S with 3D file import function Hydraulic tool clamping systems

Stanje: novo, Leto izdelave: 2026, Condition: new Year of manufacture: 2026 Stock number: 080198 Ppodpfx Aswirtbjgxor Delivery: May 2026, subject to prior sale Country of origin: Turkey Price: €106,178 Lease rate: €1,806.84 Special price: €95,600 Pressing force: 175 tons Bending length: 3050 mm Axes: Y1 / Y2 / X / R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 200 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor: 2 x 4 kW Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: 10,900 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL UNIT: DELEM DA-66 S - 2D graphical touchscreen programming mode - 3D machine visualization in simulation and production - 24" high-resolution TFT color display - Delem Modusys compatibility (scalability and adaptability of modules) - USB and peripheral interfaces - User-specific application support within the controller's multitasking environment - Sensor bending & correction interface - Offline software Profile-S2D Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and gooseneck 4-way die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms on linear guides Equipment in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed OPTIONS (DELIVERY TIME WITH OPTIONS APPROX. 16 WEEKS): CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Further options such as pneumatic or hydraulic tool clamping available on request

Stanje: novo, Leto izdelave: 2025, Condition: new Year of manufacture: 2025 Stock number: 060103 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €7,500 Leasing rate: €121.59 In stock: 1 Special price: €6,300 Saw blade diameter: 350 mm Saw blade dimensions: 350x32x63 mm Saw blade speed: 45 / 80 rpm Mitre angle left: 45° Mitre angle right: 45° Cutting capacity 0° round / square: 115 mm Cutting capacity 45° right round / square: 110 mm Cutting capacity 45° left round / square: 110 mm Motor: 1.8 / 2.2 kW Width: 1,100 mm Depth: 1,000 mm Height: 1,400 mm Weight: 300 kg Semi-automatic circular saw High production performance, ideal for individual parts and small batches Heavy-duty gearbox Cast iron housing Foot switch Hydropneumatic saw head feed for consistent lowering and optimal cutting guidance Ppsdpswmf Uaofx Agxer Pneumatic vice 2 cutting speeds Adjustable saw head stroke to suit the dimensions of the material to be cut Piece counter Mitre 45° right to 45° left Saw blade not included OPTION: Saw blade Dm. 350 mm €180.00

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €163,101 Leasing rate: €3,082.61 Working area: 2000 x 6000 mm Plasma power source: Hypertherm XPR 170 CORE Max. sheet thickness (mild steel): 60 mm Max. sheet thickness (stainless steel): 38 mm Max. sheet thickness (aluminium): 38 mm Max. pierce thickness (mild steel): 35 mm Max. pierce thickness (stainless steel): 22 mm Max. pierce thickness (aluminium): 25 mm Current: 170 A Max. cutting speed: 12 m/min Positioning speed: 35 m/min Positioning accuracy: +/- 0.1 mm Repeatability: 0.1 mm Psdpfxswiq Hae Agxspr Weight: 6,000 kg HyPerformance plasma source Hypertherm XPR 170 CORE with True Hole technology Automatic gas console Plasma torch height control Laser for zero point determination Collision protection (torch breakaway system) CNC control with AURORA plasma cutting software Lantek CAD/CAM software incl. nesting Filter unit control via CNC Remote diagnostics via network Sheet alignment function Operating manual in GERMAN and ENGLISH Options: - Extraction unit with filter - Additional charge for Optimix instead of Core Further options such as 3D cutting head, drilling head, tube cutting device, oxy-fuel torch, Durma Cloud etc. available on request.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Pjdpfx Asypbquegxopr Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Pjdjypbqnspfx Agxjpr Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Ppedpfx Agjypbqhjxsr Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Ppjdpfx Aoypbqbogxor Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Podsypbp Dopfx Agxopr Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2026, Stanje: novo Letnik izdelave: 2026 Številka zaloge: 070152 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 4.800 € Na zalogi: 1 Teža koluta: 500 kg Najv. zunanji premer koluta: 1200 mm Najm. notranji premer koluta: 400 mm Najv. notranji premer koluta: 550 mm Najv. širina koluta: 300 mm Najm. širina koluta: 50 mm Najm. širina koluta pri različici s pnevmatsko pritisno roko: 80 mm Motor: 0,55 kW Dolžina: 1400 mm Pjdswirz Sjpfx Agxspr Širina: 1200 mm Višina: 1550 mm Teža: 190 kg Motorni pogon Mehansko nastavljivo jedro za kolut s 4 čeljustmi Regulacija hitrosti odvijanja ter časa pospeševanja/decelacije Fotoelektrični bližinski senzor SICK za nadzor povešenosti materiala

Stanje: novo, Condition: new Ppsdpfewirktex Agxjr Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €9,210 Lease rate: €177.75 Saw frame: pivoting frame Saw blade dimensions: 3160 x 27 x 0.9 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity 0° round: 270 mm Cutting capacity 0° square: 270 mm Cutting capacity 0° flat: 340 x 220 mm Cutting capacity 45° round: 230 mm, square: — Cutting capacity 60° round: 150 mm, square: — Cutting capacity -45° round: 180 mm, square: — Working height: 910 mm Hydraulic motor: 0.37 kW Main motor: 1.5 kW Coolant pump motor: 0.12 kW Length: 1,730 mm Width: 770 mm Height: 1,460 mm Weight: 476 kg MITER ANGLE ADJUSTABLE VIA DIGITAL DISPLAY Chip brush Control panel Pivoting frame Infinitely adjustable lowering via hydraulic cylinder Hydraulic lifting of the saw frame Quick lowering with automatic switch to working speed via sensor pin Mechanical vise with quick clamping Coolant system Machine base Chip collection tray Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades available upon request

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 8285 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €33,900 In stock: 1 unit Pressing force: 30 tonnes Bending length: 1,050 mm Axes: 3 (Y1, Y2, X) Stroke: 160 mm Distance between frames: 850 mm Throat depth (side stand): 250 mm Installation height: 390 mm Drive system: hydraulic Working speed Y-axis: 10 mm/s Return speed Y-axis: 130 mm/s Backgauge travel X-axis: 495 mm Backgauge speed X-axis: 250 mm/s Table height: 835 mm Table width: 104 mm Oil tank: 75 l Motor power: 7.5 kW Length: 2,470 mm Width: 1,250 mm Height: 2,245 mm Weight: 3,250 kg Demo machine / as new condition Net price (new price: €41,200) 3 axes (Y1, Y2, and X axis) CNC control DT-10 incl. PC software Ppedpfxswirnfe Agxor - 10” 2D graphic display - Intuitive touchscreen operation (easy contour drawing with finger) - Direct programming of bend angle - User-friendly dialogue-based programming - Graphic simulation of the bending process - Automatic calculation of developed length for sheet metal blank - Graphic product and tool memory - Correction options - Manual, semi-automatic, and fully automatic operating modes - Tonnage calculation/programming via CNC - Internal data storage - USB ports for backup and program export Motorized backgauge with linear guideways and ball screw spindles Intermediate pieces for upper tool clamping Sheet support arms Side safety guards Equipment compliant with CE regulations Operating manual in GERMAN or ENGLISH OPTION: DBend, 3D CAD/CAM import and simulation software (step, iges and dxf file import) €2,110,-

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Ppedpfx Aswird Hsgxjr Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080112 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €86,376 Leasing rate: €1,438.29 In stock: 1 Special price: €76,100 Pressing force: 175 t Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 100 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 10,900 kg 4 axes (Y1, Y2, X, and R axes) Ppsdswiranjpfx Agxor CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (easy bending contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of flat length for sheet cutting - Graphic storage for products and tools - Correction capability - USB ports for backup and program transfer - PC software for programming on a PC, transferable to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment compliant with CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Increased stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides - More available options, such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem operation, alternative CNC controls, etc. OPTIONS (LEAD TIME FOR THESE OPTIONS APPROX. 10 WEEKS): Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick clamp lever for the top tool

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080109 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €68,282 Leasing rate: €1,135.89 Bestseller: 1 Available in stock: 1 Special price: €60,100 Pressing force: 120 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Ppsdpowiq Sisfx Agxor Stroke: 180 mm Distance between uprights: 2550 mm Side frame throat depth: 250 mm Installation height: 375 mm Drive concept: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 77 mm/s Backgauge travel (X-axis): 620 mm (with optional R-axis) Backgauge speed X-axis: 250 mm/s Table height: 878 mm Table width: 104 mm Oil tank: 150 l Motor power: 11 kW Length: 3750 mm Width: 1230 mm Height: 2400 mm Weight: 5900 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphic display 10" - Intuitive touchscreen operation (easy drawing of bend contours with finger) - User-friendly dialogue programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet cutting - Graphical product and tool storage - Correction options - USB ports for backup and program transfer - PC software for writing programs on the PC and transferring to the machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning system in the table Intermediate pieces for upper die clamping Upper die 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill Operating instructions in GERMAN and ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to series production of standardized models, with no compromises on quality and precision OPTION: DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 8319 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €77,982 Leasing rate: €1,326.78 In stock: 1 Special price: €70,200 Press force: 200 tons Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 210 mm Distance between uprights: 2,550 mm Throat depth (side frame): 250 mm Installation height: 445 mm Drive system: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 7 mm/s Return speed Y-axis: 73 mm/s Back gauge travel X-axis: 620 mm (with optional R-axis) Back gauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Oil tank: 150 l Motor power: 15 kW Length: 3,750 mm Width: 1,390 mm Height: 2,500 mm Weight: 8,160 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphics display 10" - Intuitive touch screen operation (easy contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of the developed length for sheet cutting - Graphical product and tool library - Correction possibility - USB ports for backup and program transfer - PC software to create programs on PC and transfer via USB to the machine CNC-controlled back gauge with linear guides and ball screws CNC-CONTROLLED CROWNING SYSTEM IN TABLE Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH Psdpfxjwiqp Io Agxopr ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model due to serial production of standardized models without compromising quality and accuracy OPTION: Crowning system motorized and adjustable via CNC control Including: CNC-controlled R-axis (adjustment range in X = 500 mm) Including: DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Št. zaloge: 070155 Dobava: takoj, vmesna prodaja mogoča Država izvora: Turčija Cena: 6900 € Leasing obrok: 133,17 € Na zalogi: 1 Teža navitja (coila): 500 kg Najv. zunanji premer navitja: 1200 mm Min. notranji premer navitja: 400 mm Najv. notranji premer navitja: 550 mm Najv. širina navitja: 300 mm Min. širina navitja pri različici s pnevmatskim pritisnim krakom: 80 mm Dolžina: 1450 mm Širina: 1200 mm Višina: 1640 mm Teža: 260 kg Pogonski motor Mehansko nastavljiva navijalna gred s 4 čeljustmi Ppsdpfxowirmuj Agxor Regulacija hitrosti odvijanja kot tudi časa pospeševanja in zaviranja Fotoelektrično bližinsko stikalo SICK za nadzor povesne zanke PNEVMATSKA NAPENJALNA ROKA

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Podpfx Aeyb Sz Isgxjpr Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Ppedpfx Agoyb Sywjxer Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Ppsdpfx Ageyb Sydsxor Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended