Fronius Tps 4000 Cmt * Austria * -/- Komplet Robotov Fronius Tps 4000 Cmt -/- nakup rabljenega (5.291)

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 99 m³, Oprema: ABS, Kögel SN 24 ponjava z nakladalno ploščadjo, dvižna sila do max. 4000 kg Int. št. za povpraševanja: 0426395 Bwodpey I E Ivsfx Agtjl * Stanje: zelo dobro * Dovoljena skupna masa: 35,00 t * Prva registracija: 02/2012 * ABS * EBS * 3 osi z zračnim vzmetenjem * Kolutne zavore * Edscha ponjava * Dvižna nakladalna ploščad: Dhollandia, dvižna sila max. 4.000 kg Dolžina tovornega prostora: Dolžina: 13.600 mm * Širina: 2.480 mm * Višina: 2.900 mm Pnevmatike: 1. os: 445 / 45 R 19,5 30% zračno vzmetenje 2. os: 445 / 45 R 19,5 45% zračno vzmetenje 3. os: 445 / 45 R 19,5 25% zračno vzmetenje ----Cena: 14.900 EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 99 m³, Oprema: ABS, Kögel SN 24 avtotransporter z dvižno ploščadjo, dvižna moč 4000 kg Int. št. za povpraševanja: 0426395 * Stanje: zelo dobro * Dovoljena skupna masa: 35,00 t * Prva registracija: 02/2012 * ABS * EBS * 3 osi, zračno vzmetenje * Disk zavore * Edscha ponjava * Nakladalna ploščad: Dhollandia, dvižna moč do max. 4.000 kg Dimenzije tovornega prostora: * Dolžina: 13.600 mm * Širina: 2.480 mm * Višina: 2.900 mm Pnevmatike: Bwsdpfx Ajy I E Iiegtol 1. os: 445 / 45 R 19,5 30% zračno vzmetenje 2. os: 445 / 45 R 19,5 45% zračno vzmetenje 3. os: 445 / 45 R 19,5 25% zračno vzmetenje ----Cena: 14.900 EUR + 19 % DDV Za dodatna vprašanja smo vam na voljo na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ???? Pridržujemo si pravico do napak v pisanju, sprememb in vmesne prodaje.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, Avtomatski delilec Koenig Mini Rex 4000 s formirno postajo - rabljeno - letnik 2009 - po obnovi - maksimalna zmogljivost 4.000 kosov/uro - območje teže 30–135 g - elektronsko upravljanje Bsdpfx Aeyt Iplsgtowl - garancija - prevzem iz skladišča/možnost dostave - cena na povpraševanje

Stanje: rabljeno, Leto izdelave: 2020, CNC portalni plazemski rezalni stroj z agregatom za posnemanje robov Skew Rotator Bevel Proizvajalec: Messer Tip: Multitherm 4000 Letnik: 2020 Bsdpfxox Dlwms Agtswl CNC krmiljenje: Global Control Plus Delovno območje: 3 x 12 m Širina tira: 4.000 mm 1 avtogeni gorilnik ALFA 1 plazemski gorilnik z agregatom za posnemanje robov Skew Rotator Bevel Napajalnik Hypertherm XPR300 Debelina reza: 50 mm prebijanje lukenj 80 mm razrez Odsesovalna miza Beuting brez filtrirne enote Programska oprema: Omniwin z Bevel ID: ä16426

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 950 mm, proizvajalec krmilnikov: FANUC, model krmilnika: Series 31i, širina mize: 1.050 mm, dolžina mize: 4.100 mm, skupna masa: 22.500 kg, največja hitrost vretena: 3.500 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, Ta vertikalni obdelovalni center EUMACH FBE-4000 je bil izdelan leta 2013. Opremljen je s krmiljem Fanuc serije 31i in ima 3 osi. Stroj ima hitrost vretena 3500 obr/min. Prednosti stroja Bwodpfxsyttffo Agtsl Kvalitativne prednosti stroja • Zelo dobro stanje! Tehnične prednosti stroja • Moč motorja vretena 22/26 kW

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Naprodaj sta 2x originalna ABB kompleta mehanskega omejevalnika za industrijske robote. Podrobnosti: Proizvajalec: ABB Oznaka: Mechanical Stop Kit Axis 1 (nastavljiv) Številka artikla: 3HAC033134-001 Stanje: Novo in originalno zapakirano Obseg dobave: glej slike (vključuje vijake in dokumentacijo) Področje uporabe: Industrijski roboti ABB Omejitev delovnega območja (os 1) Varnostna in prilagoditvena komponenta Bjdpfxsy E Rzcs Agtjwl Posebnosti: Originalni ABB nadomestni del Neuporabljeno iz zaloge Idealno za vzdrževanje / zalogo nadomestnih delov

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Brosura Wohlenberg CITY 4000 - hotmelt Čista in delujoča! Bjdpfxjxdm D Ue Agtjwl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, For sale is a Cognex camera system designed for demanding OCR assembly verification and defect detection applications. The system has never been used and is sold as a complete set including all accessories as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and can be researched online for further details. Bodsmx Sl Tepfx Agtewl Digital industrial image processing camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstration unit - COGNEX (In-Sight 7000 Gen2 series) - 7802 - 1600x1200 pixels UXGA resolution (1/1.8" CMOS monochrome sensor with global shutter) - 53fps - C-Mount type / S-Mount type - 7.2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28VDC / optocoupler; isolated trigger input) + 3 x digital inputs (15-28VDC / optocoupler; isolated discrete inputs) + 4 x digital outputs (26.4VDC 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (power supply) + 12-pin M12 connector (breakout) + Micro SD card slot - Supply voltage 24VDC - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capabilities - IP67 - aluminum (die-cast) housing - compatible with PatMax RedLine.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: Bwjdpfx Ajy Dq Awegtel 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, automatic edge banding machine model STEFANI MONOBETA 4000 used machine with operating manuals for edge processing of PVC, veneer, melamine, ABS, solid wood up to 25 mm suitable for furniture, fittings, kitchens, bathrooms, doors, panels and more XILIA positioner technical specifications: gluing unit tilt 0° / 7° Bwjdpfowlzz Tjx Agtel min. height of workpiece to be edged: 10 mm max. height of workpiece to be edged: 60 mm min. thickness of edge tape: 0.4 mm max. thickness of edge tape: 3 mm max. thickness of solid wood edging: 25 mm min. panel width: 60 mm min. panel length: 110 mm adjustable feed speed: from 8 to 22 meters/minute electric pressing stroke telescopic support for large panels soundproof cabin configuration: 1. Gluing unit with adhesive tank 2. Pressure rollers 3. Edge feeding device 4. End trimming unit for vertical trimming of excess edging front and rear – 2 motors, 0.44 kW, 12,000 rpm 5. Top/bottom trimming unit for trimming the top and bottom of excess edging – 2 motors, 0.55 kW at 12,000 rpm additionally supplied: 2 top/bottom trimming units with 2 motors, 1.15 kW at 12,000 rpm 6. Glue scraper unit for removing glue residue Supplied with 2 additional glue scraper units as spare parts 7. Overlapping brush unit for brushing and polishing the applied edges – 2 motors at 1,400 rpm, tiltable 8. Dryer unit 0-600° – 1,400 watts 9. Corner rounding unit model STEFANI TRIM/60, external unit HF high frequency converter 380 V / 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: Siemens SL Število orodnih mest: 160 Vpenjalo orodja: HSK 63 Hitrost vretena: 10.000 min-1 / 242N Velikost palete: 630×500 mm Število palet: 2 Bwodpfx Aoy Ap Euegtsl X-os: 800 mm Y-os: 800 mm Z-os: 1000 mm Največja obremenitev mize: 1000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 4.000 l, uporabna prostornina rezervoarja: 4.000 l, skupna širina: 1.600 mm, skupna višina: 3.500 mm, material stene: nerjavno jeklo, premer odprtine jaška: 400 mm, lokacija jaška: Top, Posoda iz nerjavečega jekla (Inox) – 4.000 L Razpoložljivost: 7 kosov Dimenzije in podrobnosti Različica 1 (2 kosa): Premer: 180 cm Višina: 250 cm Različica 2 (5 kosov): Premer: 160 cm Višina: 360 cm (skrajšanje na 300 cm možno) Bjdeyw Tp Hspfx Agtewl Dodatna oprema Plastni filter: Seitz Orion 40/60 – 2 kosa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, DOUBLE GLAZING BEAD SAW TRF 527 NC FP CA MM.4000 (as per nameplate) Double miter saw for simultaneously cutting two glazing beads positioned one above the other. Right saw unit is fixed. Adjustment of the left unit according to set cutting length, which can be read from a digital measurement display. Units are equipped with supports, allowing simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After completing the cutting operation, pneumatic clamping cylinders automatically swivel to the side to facilitate loading and unloading of the machine. STANDARD FEATURES • Fixed unit right • Digital measurement display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety devices with horizontal, swiveling clamping devices • Two-hand control • Belt drive • Pneumatic saw unit lift • Central support Bwsdpoy Er Ikjfx Agtol TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 4,000 mm • Min. cutting length: 158 mm • Weight: approx. 290 kg • Required space (standard configuration): approx. 4,500 x 1,000 mm 1 set (2 pcs) mechanical stops for setting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles according to drawing: - Attachments on the clamping devices to compensate for the profile angle - Spacers on the rear stops of the units and the center section—as shown in the sketch below (in green), a beveled pressure piece follows the inclined profile, pressing it against the spacer (red) on the stop. Specifications subject to change; no liability for errors.

Stanje: rabljeno, Wall-mounted slewing crane DEMAG type KBK 2 Demag serial no. jib arm: KBK-982 040 44 Demag serial no. wall bracket: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Bjdpotqwrvofx Agtswl Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height underside jib to top edge wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length flange plate wall bracket to jib tip: 4330 mm - Jib profile C-profile rail DEMAG KBK 2 - Trolley for C-profile rail DEMAG KBK 2 - Original paint, yellow Dead weight: 170 kg In very good condition Price without chain hoist – Chain hoist or crane also available in the shop.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.744 h, Funkcionalnost: popolnoma funkcionalen, delovna širina: 850 mm, površinska zmogljivost: 6.375 m²/h, skupna masa: 805 kg, trajanje garancije: 12 meseci, kapaciteta rezervoarja za vodo: 200 l, The Taski Swingo 4000 scrubber-dryer is a highly efficient machine, ideally suited even for the toughest jobs in large-scale facilities. During a comprehensive inspection and refurbishment process, our service team thoroughly checked every function of the machine. All mechanical components showing signs of wear and tear were replaced with new parts. This guarantees a long, trouble-free operation, with no additional investments expected in the future. The unit is now in excellent condition and is ready to start working immediately. The machine comes with a 12-month warranty (excluding wear parts). We offer the option to present the machine to you via live stream over the internet. You can view the machine in operation, including all features and equipment, in real time. We are happy to answer any questions. Product benefits and features: - NEW GEL BATTERIES 6V 250Ah SIAP (4 units) - Year of manufacture: 2019, with 1744 operating hours - 850 mm cleaning head equipped with two new medium-hardness disc brushes, suitable for all surfaces - New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances - The unit is equipped with a new, durable drain hose and a new suction hose - The new suction turbine ensures high suction performance - Every machine we offer comes with individually taken photos – you will receive exactly the machine you see Technical data: - Supply voltage: 24V - Working width of brushes (mm): 850 - Squeegee width (mm): 1100 - Theoretical coverage (m²/h): 6375 - Solution/recovery tank capacity (l): 200/210 - Working speed (km/h): 7.5 - Number of brushes: 2 - Weight without batteries (kg): 295 - Total weight, ready to operate (kg): 805 - Climbing ability (%): 10 Bwedpfxsw A Il To Agtel Installed equipment: - NEW GEL BATTERIES 6V 250Ah SIAP (x4) - NEW 24V 600W suction turbine - NEW 430mm disc brushes (x2) - NEW suction hose - NEW drain hose - Squeegee assembly with new rubber blades - Plus many other small parts

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 800 mm, skupna širina: 4.000 mm, skupna višina: 900 mm, TOP delovna miza AT 4000 z bukovo delovno ploščo, na kolesih Inox delovna miza AT 4000 z delovno ploščo iz bukovega lesa spodaj odlagalna rešetka Bwsdpfjyhzl Tex Agtol blok predalov na levi strani Mere: 4000 x 800 x 900 mm (ŠxGxV) Rabljena oprema, očiščena Na voljo imamo širok izbor delovnih miz!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Lisec insulating glass line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, inlet extension for washing machine, year of manufacture 1990 - RTV-38/25WE, washing machine inlet with glass thickness measurement and automatic low-E detection, year of manufacture 1990 - VHW-25V8, washing machine with 8 brushes for low-E, including 2 sand filters, 2 hot water tanks and blower, year of manufacture 1990 - RTVN-32/25ST, washing machine outlet, year of manufacture 2001 - RSVN-38/25A, frame assembly station, year of manufacture 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year of manufacture 2001 Bwjdpfx Agsyztaystol - RTVN-11/25ST, press inlet (or extension for measuring zone), year of manufacture 2001 - FPS-36/25U2T, gas filling press for Argon, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - APKV-25/2, 2-track cork applicator, year of manufacture 2001 - RTVN-15/25VFE, sealing line infeed, with glass and frame scanning as well as special shapes barcode reader, year of manufacture 2001 - VFL-1DS/25, automatic sealing system, including options for triple units (2 sealing passes), stepped units (bottom 0-50 mm, front, rear and top 0-140 mm), and special shapes in accordance with Lisec special shape catalogue, Beckhoff PC, year of manufacture 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year of manufacture 2001 Available now from our warehouse in Hofkirchen/Austria

Stanje: rabljeno, NON-STOP podajalnik za kuverte StenzFeeder za tiskarske stroje v segmentu četrt-formata s podajanjem preko letvice ali sesalne glave. Popolnoma delujoč. Vključuje izhodni transportni trak. Format: 0x0 Bsdpfx Agox Rh Ecotswl Oprema: podajalnik za kuverte izhodni trak Največja velikost formata: 36,5 x 35 cm Največja širina prehoda: 36,5 cm

Stanje: novo, Leto izdelave: 2025, Ref. No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of manufacture: 2025 Control type: CNC control Control system: SIEMENS SINUMERIK 840D SL Location: Istanbul Country of origin: Türkiye Spindle speeds: 4,000 rpm Turning height: 2,000 mm Table diameter: 4,000 mm Spindle power: 37 kW Bsdpfx Agjxmd Suotowl Max. table load: 40 t Table rotation speed (turning): 60 rpm Max. turning diameter: 5,000 mm Max. turning height above faceplate: 2,000 mm Max. spindle torque: 1,200 Nm Spindle taper: ISO 50 Machine length: 7,500 mm Machine width: 12,000 mm Machine height: 9,500 mm Approx. machine weight: 125 t Additional information: RAM slide stroke: 2,100 mm RAM cross-section: 350 x 350 mm Vertical travel of movable cross rail: 2,000 mm Table drive system: Segmented direct drive motors Table torque: 8,200 Nm – 14,400 Nm max. Table guidance system: Hydrostatic bearings and guides IGREK DT 4000 – Your Solution for Precision Heavy-Duty Machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning lathe designed specifically for precision machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable cross rail, it enables efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key Features: Hydrostatic Rotary Table: The 4,000 mm hydrostatic rotary table ensures maximum precision and smooth operation when machining heavy workpieces. Movable Cross Rail: The vertically adjustable cross rail with a 2,000 mm stroke offers flexibility and enables adaptation to different workpiece heights. Powerful Spindle: With a spindle speed of up to 4,000 rpm and a power output of 37 kW, the machine is designed for demanding metal-cutting applications. High Load Capacity: The rotary table accommodates workpieces weighing up to 40 tons, making it ideal for large and heavy components. Multifunctional Machining: Thanks to the live spindle and precise C-axis positioning, milling and drilling operations are possible in addition to turning, increasing the machine’s versatility. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. With its robust construction and wide range of machining capabilities, it is the ideal solution for the precise machining of large components in various industries.

Stanje: dober (rabljeno), 🧰 Product Features • Model: TP-502 MV • Condition: used • Segment: Performance • Material: Plastic, steel • Colour: red, white • Suitable for material: PP strap • Battery module: 2x 12 V batteries with 120 Ah • Battery runtime: lasts up to 4 hours in continuous operation • Strap tension: 8 – 70 kg • Strap width: 9-12 mm • Strap thickness: 0.6 – 0.75 mm • Height: 1074 mm • Width: 585 mm • Depth: 2315 mm • Core diameter: 200 mm • Net weight: 174 kg (including 120 Ah battery) • Strapping machine type: semi- and fully automatic • Sealing mechanism: welding • Strappings per minute: approx. 6 • Enables mobile strapping regardless of power supply 💰 Price € 3,470,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock Bedpfx Agow Dz Ukotewl (Subject to changes and errors in technical data, details and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex stock.)

Stanje: rabljeno, Leto izdelave: 1957, Premer struženja nad posteljo: 800 mm Premer struženja nad suportom: 540 mm Dolžina struženja: 4000 mm Višina konic: 400 mm Razdalja med konicama: 4000 mm Vrtljaji vretena: 9 - 1140 o/min Premer vretena: 96 mm Teža stroja pribl.: 8,5 t Dimenzije stroja (D x Š x V): 7,0 x 1,70 x 1,70 m - z mostom - Oprema: Trivrata vpenjalna glava FORKARDT 400 mm, štirivrata vpenjalna glava 500 mm, Bodpfsxwp Ehox Agtewl čelna plošča 800 mm, digitalni prikaz na oseh X in Z ACU-RITE, Glava MULTIFIX z več vložki, 2 fiksna luneta, 1 gibljiva luneta, sredinski konic, naprava za hlajenje

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ponujamo za prodajo robustno CNC rezkalno središče EUMACH FBE 4000, primerno za težko obdelavo in izdelavo velikih komponent. Stroj je opremljen z modernim krmilnim sistemom Fanuc 31iMB in zmogljivim vretenom s sistemom SK50, kar zagotavlja visoko produktivnost in stabilnost obdelave. CNC rezkalni stroj s fiksno mizo EUMACH FBE 4000 s krmilnim sistemom Fanuc 31iMB v standardni izvedbi, vključno z naslednjo posebno opremo stroja: Dialog krmilnega sistema v slovenskem jeziku Avtomatska menjava orodij – 24 kosov Pomik osi Z – 1500 mm s povišanim stojalom Transporter za odrezke Merilna sonda za obdelovanec OMP-60 Merilna sonda za orodje TS-27R Moč na vretenu 22/26 kW Bsdpfey A Swyex Agtewl Obrati horizontalnega vretena 5000 vrt./min. Ročna rotacijska glava, obrati 3500 vrt./min. Hlajenje skozi vreteno Premik zalogovnika orodij izven delovne mize – ob stojalu na levi strani Vpenjanje vretena je SK50.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 40 h, številka stroja/vozila: 16660, gradbena višina: 1.330 mm, največja širina izdelka: 1.035 mm, širina pometanja: 975 mm, vrsta motorja: Električni, proizvajalec: Nilfisk Bwsdextr Epspfx Agtsl

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, For sale: used wheel balancing machine. Bwjdew Dpw Hepfx Agtel Year of manufacture: 2010. Dimensions (W/D/H) approx.: 1,200 x 1,200 x 1,700 mm. Weight: approx. 400 kg. The machine can be inspected by appointment.

Stanje: rabljeno, Leto izdelave: 2006, CNC portalni plazemski rezalni stroj Proizvajalec: Messer Tip: Multitherm 4000 Leto izdelave: 2006 CNC upravljanje: Global Control Delovno območje: 3 x 12 m Bwedpfsykpd Eex Agtol Širina tira: 4.000 mm Dolžina proge: 15 m Odsesovalna miza 1 x plazemski gorilnik s Hypertherm HPR260 1 x plazemski gorilnik s Skew Rotator Delta in Hypertherm HPR260 Brez filtrirne enote ä16426