Floor Scales Stainless Steel With Ramp Talne Tehtnice Iz Nerjavečega Jekla nakup rabljenega (53.344)

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Njdpsh S Nz Ssfx Agxola Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, A stainless steel filter system with pneumatic cleaning in very good condition. Filter surface: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power 22 kW; Airflow: 6,700 m³/h; Pressure: 8,000 Pa Compressed air valves: ASCO 24 Volt Number of filter bags: 48 Filter medium: not included Insulation: Yes With differential pressure measurement Dimensions (L/W/H): 3,000 mm / 1,700 mm / 2,100 mm (up to outlet) Nsdjfg Iphepfx Agxola The filter consists of 2 modules split in the middle. Also available: stainless steel cooling screw conveyor, Ø400 mm; length 4,100 mm

Leto izdelave: 1991, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 520 kg, The pump was operated on a test bench and has only very few operating hours. Flow rate: 400 m³/h (111 liters/second) Head / Discharge pressure: 19 meters / 1.9 bar Pump speed: 1,450 rpm Required NPSH: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced to 264.5 mm (maximum Ø 269 mm) Shaft seal: single-acting mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: rolling bearing Lubrication: grease Materials Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 200 Discharge nozzle nominal diameter: DN 150 Suction side rated pressure: PN 16 Discharge side rated pressure: PN 16 Coupling manufacturer: Flender Nsdpsrfdttefx Agxela Coupling type: Eupex NH with spacer sleeve Baseplate: painted cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1,435 rpm Frequency: 50 Hz Rated voltage: 380 / 660 V Rated power: P2: 30 kW Thermal class: F Motor protection rating: IP54 Power factor (cos phi): 0.82 Dimensions: Length: 1,600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Nsdpfxsqabiae Agxela Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 75 m³/h, skupna masa: 1.250 kg, notranja širina: 500 mm, skupna dolžina: 2.150 mm, skupna širina: 900 mm, skupna višina: 800 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, največja hitrost vrtenja: 14 obr/min, vrtilni moment: 2.750 Nm, 3 x Rotary Airlock Valves Manufacturer: Kreisel Type: ADG 630x800-11 LUG Design: Explosion-proof version Ex II1D /3DGc -20°C / +60°C Inlet and outlet (internal dimensions): 500 x 800 mm Nsdpfovzk Shex Agxola Construction height: 800 mm Housing material: 1.4571 stainless steel Rotor diameter: 630 mm, made of 1.4571 stainless steel With side discs and 12 chambers Wear and sealing strips made of spring steel C60G (0.0601 / hardened), adjustable, reversible, and replaceable via inlet and outlet External roller bearings, shaft seals within the housing via adjustable and relubricable stuffing box packings Shaft protective sleeves Incl. switching flag (4 pulses/rev) and protective cover End shields with purge air connections Mounting bracket for flange-mounted geared motor (lantern design) Drive via elastic coupling and geared motor Theoretical conveying capacity at 100% fill and 14 rpm: 1.25 m³/min (75 m³/h) Vibrator: Manufacturer: Netter Drive: electric Power: 0.11 kW Centrifugal force: 627 Newton Total weight incl. gear motor: 1,250 kg Overall dimensions: Length: 2,150 mm Width: 900 mm Height: 800 mm Gear Motor Motor data: SEW RF97 AM112 M2BA112M4 Voltage: 400 V Power: 4.0 kW Speed: 14 rpm

Stanje: rabljeno, Stainless steel tank with saddle supports - single-walled - cleaned/flushed - capacity: approx. 23,000 liters Nledpfxsiw Egzj Agxsa - domes and outlets welded - also suitable for AHL/ASL or similar substances Loading and transport can be arranged. Only serious and genuine inquiries will be answered. Please provide: Name, email address, and telephone number.

Leto izdelave: 1999, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 2 x 173 m³ Stainless Steel Storage Silos (Material: 1.4301) (formerly used as plastic granulate silos) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Container type: Silo Condition: Used Design: Vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Specification Nlodpsxvtvujfx Agxea Inner shell material: Stainless steel Note: Material grade 1.4301 Support type: Foot ring/base skirt Top head type: Conical top Inclination: approx. 15 % Bottom type: Cone Cone angle: 60 degrees Top Section: 1 x perimeter roof railing, height: approx. 1,200 mm 1 x walkway with handrail 2 x crane lifting lugs 1 x manway DN 600 1 x connection flange for level measurement 1 x welded nozzle for full-level switch 1 x flange DN 100 (for filling) 1 x vent with hood Shell: 1 x operating door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x fill line DN 100, ending in TW coupling 1 x welded adapter for empty-level sensor Bottom Section: The silos end in a 60° cone at the bottom, fitted with an emergency shut-off valve and a mounted suction box (see photos) A three-section access ladder with back protection and rest platforms is optionally available.

Stanje: rabljeno, Stainless steel work table - sturdy construction Nledpeb Uhnlefx Agxsa - Dimensions: 898 x 598 x H870 mm - Weight: 12 kg - 1 unit available

Stanje: rabljeno, Tier trolley, transport trolley, rack trolley, sorting trolley, order picking trolley, mobile rack, tray trolley, stick trolley -Dimensions: 1015/950/1830 mm Nsdpfx Agsd Ty Aqjxela -Material: stainless steel -Weight: 90 kg

Stanje: rabljeno, Stainless steel (VA) chimney cap, chimney hood - Hole spacing: 135 x 385 mm - Price: per piece - Quantity: 2 available - Dimensions: 655/730/H170 mm - Weight: 4.7 kg Nlsdpfx Asb Uhm Aegxja

Stanje: rabljeno, Disc valve, butterfly valve, ball valve, shut-off damper, shut-off valve, gate valve - Material: 1.4408 stainless steel - Without actuator - Connection: DN50 - Width: 152 mm - Nominal pressure: PN40 - Quantity: 1x valve available - Price: per piece - Weight: 9.69 kg/piece Nsdpfx Ajdki Rtegxela

Stanje: rabljeno, Stuffing box for screw conveyor, transport screw, screw conveyor system, conveying technology, tubular screw conveyor, drying screw, cooling screw, cooling tube screw, heating screw, heating tube screw, screw heat exchanger - Stuffing box: made of stainless steel - Stuffing box: for shaft diameter Ø 70 mm - for stuffing box packing - Quantity: 2 stuffing boxes available - Price: per piece Nodpjdfgllsfx Agxola - Dimensions: 155/155/H71 mm - Weight: 3.9 kg

Stanje: rabljeno, Stuffing box for screw conveyor, auger conveyor, screw feeder, conveying technology, tubular screw conveyor, drying screw, cooling screw, cooling tube screw, heating screw, heating tube screw, screw heat exchanger - Stuffing box: made of stainless steel Nledpfxjdfglme Agxja - Stuffing box: for shaft Ø 110 mm - for stuffing box packing - Quantity: 2 stuffing boxes available - Price: per unit - Dimensions: 205/205/H84 mm - Weight: 8.5 kg

Stanje: rabljeno, Stuffing box for screw conveyor, conveying screw, screw conveyor system, conveying technology, tubular screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger Njdpfxodfglij Agxola -Stuffing box: made of stainless steel -Stuffing box: for Ø 40 mm shaft -for stuffing box packing -Quantity: 3 stuffing boxes available -Price: per piece -Dimensions: 145/145/H66 mm -Weight: 3.1 kg

Stanje: rabljeno, Stainless steel couplings, pipe coupling - Type: GRIP E W5 - Internal diameter: Ø 60.3 mm Nledpfxscillto Agxja - Range: from 59.5 to 61.0 mm - Pressure: 16 bar - Price: per piece - Quantity available: 10 units - Dimensions: 85/95/H78 mm - Weight: 0.6 kg/unit

Stanje: rabljeno, Chimney, exhaust pipe, stainless steel chimney pipe Nljdpjd N Ddtefx Agxja -Chimney system: Ø 250 mm, non-insulated -Quantity: 2 pieces, each 1 m -Price: for the complete set -Dimensions: 250/250/H1000 mm -Weight: 7 kg

Stanje: rabljeno, Gland packing for screw conveyors, transport screws, screw conveyors, conveying technology, tube screw conveyors, drying screws, cooling screws, cooling tube screws, heating screws, heating tube screws, screw heat exchangers Nsdpfx Agjd Naw Dsxjla - Gland packing made of: stainless steel - Gland packing for: Ø 38 mm shaft - For: gland packing strip - Price: per piece - Quantity: 8 pieces - Dimensions: Ø 101 x 45 mm - Weight: 1 kg

Stanje: rabljeno, Gland seal for screw conveyors, transport screws, screw conveyors, conveying technology, tubular screw conveyors, drying screws, cooling screws, cooling tube screws, heating screws, heating tube screws, screw heat exchangers -Gland seal: made of stainless steel -Gland seal: for Ø 95 mm shaft -for gland seal tape -Quantity: 2x gland seals available -Price: per piece -Dimensions: 180/180/H82 mm -Weight: 6.6 kg Nledpfx Agsdfglpsxea

Stanje: rabljeno, Stainless steel (VA) chimney cap, chimney hood - Internal bracket spacing: 560 mm - Dimensions: 625/855/H210 mm Nsdpjb Uhmzefx Agxjla - Weight: 6.3 kg

Stanje: rabljeno, Stainless steel couplings, pipe coupling Nsdpfx Aocillvogxela -Type: FLEX 1L -Internal diameter: Ø 60.3 mm -Range: from 59.0 to 61.5 mm -Pressure: 25 bar -Dimensions: 82/92/H75 mm -Weight: 0.6 kg

Stanje: rabljeno, Conveyor belt, belt conveyor, transport belt, belt conveyor system, conveyor belt Nlsdpfxsdahcvo Agxsa -Casing: stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Conveyor belt: with carriers (cleats) -Belt width: 695 mm -Length: 4500 mm -Quantity: 2 conveyor belts available -Price: per unit -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Stanje: dober (rabljeno), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, compact filter, suspended particle filter - Air filter: housing made of stainless steel - Quantity: 2 air filters available - Price: per piece Njdpovxf S Djfx Agxela - Dimensions: 610/100/H305 mm - Weight: 7.2 kg/unit

Stanje: dober (rabljeno), Leto izdelave: 2007, Conveyor belt, belt conveyor, transport belt, belt conveyor system, belt conveyor - Manufacturer: SFB, belt conveyor type ITF / NP, 2-lane design on solid stainless steel frame Nlodokahkrspfx Agxea - Speed: 52.8 m/min - Operating voltage: 267 V - Drive: 3/2.6 Nm, see photo of nameplate - Belt width: 70 mm each - Conveyor length: 530 mm / 820 mm - Conveyor width: 220 mm - Installation dimensions: 1360/370/H700 mm - Weight: 56 kg

Stanje: dober (rabljeno), Gland for screw conveyor, auger conveyor, screw feeder, conveyor technology, tubular screw conveyor, drying screw, cooling screw, cooling tube screw, heating screw, heating tube screw, screw heat exchanger - Gland: made of stainless steel - Gland: for Ø 62 mm shaft (inner diameter 64 mm) - for gland band (inner diameter 80.2 mm) - Quantity: 5x glands available - Price: per piece - Dimensions: 149/149/H70 mm Nedpfx Agst Apm Nsxjla - Weight: 3.3 kg

Stanje: rabljeno, Stainless steel tank, stainless steel container, separator, filter vessel for plastic injection molding machine - Stainless steel container: separator - Diameter: see photos - Container: with sight glass Nedpfxoiqlkms Agxola - Total dimensions: Ø 248 x 435 mm - Weight: 17 kg