Fliegl Szs 310 Jumbo Plateau Holz nakup rabljenega (3.841)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902031190, lastna masa: 4.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 9.300 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 49 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 4.040 mm, velikost pnevmatike: 385/65 R22,5, barva: siv, Leto izdelave: 2021, The images are archive photos. The vehicle may still be in use! Chassis: Semi-Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2" king pin Patented curved front wall 24 t two-speed landing gear, single-sided operation, straight base, without load equalization 2x wheel chocks with holder Aluminum side underrun protection Folding rear underrun protection 6x half-shell fenders Integrated “fender bracket” with stone-repellent coating 2x anti-spray mud flaps on rearmost axle only 2x rear tow hooks Axles & Suspension: SAF disc brake axles, offroad version, Laser-measured axles/chassis – reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, incl. forced lowering and starting aid, operated by "braking 3x" (starting aid functional up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System: Two-line compressed air brake system Color-coded line layout for easy maintenance Spring-loaded parking brake 2 foolproof coupling heads at the front, without coupling line EBS by Haldex: electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by vehicles ensuring the ABS functionality! With raise and lower valve Vehicle stability control system Wheels and Tires: 6x 385/65 R22.5” tires, make at manufacturer’s discretion 6x steel rims, make at manufacturer’s discretion Electrics: 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white clearance lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof sockets at the front, no connecting cable Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation via auxiliary drive on truck Rcjdsy Rlvrjpfx Abpob Body: Aluminum box body made from high-grade, wear-resistant material Inclined 5 mm strong front wall, with external cylinder mount Side walls made from 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Interior with front wall access ladder (not in combination with Cramaro system) Shovel and broom holder on the front wall exterior Greenline – conical, aerodynamic body shape “Membrane” rear wall Tailgate acts as a swinging door with “double hinge”, exterior-mounted, twin hook lock Tailgate with rubber seal Continuous 5 mm thick floor, Brinell 110 Note: Only suitable for transporting sand, chippings, and gravel (max. grain size 20 mm)! All other goods are excluded from warranty! Roll tarp stores on right side, central locking on left side Operational Instructions: For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod, to prevent corrosion due to the material The specified gross weight is technically possible; depending on the load, the total weight may not be reached due to permitted axle/support and king pin loads. (Incorrect load distribution may result in poor handling and tracking characteristics) Painting

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Rodpfx Absywh Epopjcb Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Robilni stroj Holz Her Mod. Triathlon Mod. 1486 V - brušenje - lepljenje - čelilnik z 2 motorjema - obrezovalnik - zaobljevalnik Rcsdpfx Abey Ep U Eepob - robni strgalnik - zaokrožnik - strgalnik lepila - ščetke - skladno z CE standardi

Stanje: rabljeno, Leto izdelave: 2014, Za povpraševanja: Zoltán Utasi +36 30 205 7380 • motorni pritrdilni most za nastavitev pritiska • Električni sistem za brezstopenjsko podajanje 400 V / 50 Hz, 2,2 kW • "Krmiljenje PPC 221 – z 8,4'' VGA barvnim zaslonom" Visoko zmogljivo krmiljenje z zelo enostavnim upravljanjem • Predrezalna enota za robove 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 min⁻¹) s 2 rezkalnima agregatoma za predrezanje plošče na robu • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, leva rotacija Za predrezalno enoto 1801 / 1802 • Rezkar, diamantni Ø 70 x 64 x 30 mm, Z2, desna rotacija Za predrezalno enoto 1801 / 1802 • Polnilna enota za robni trak 1903 SYNCHRO avtomatski transport kolutov in materiala v trakih Rsdpsx Huhcjfx Abpecb • Enota za nanos lepila Glu Jet GJ301 avtomatska (2,3 kW, 50 Hz) • Pripravna enota za lepljenje 1913 pnevmatska prvi valj poganjan, 2 dodatna pritisna valja z individualnim pnevmatskim upravljanjem • Odrezna enota 1918 (60 mm) pnevmatska (2 x 0,45 kW, 12.000 min⁻¹), pnevmatsko vrtljiva 0/10° • Multifunkcijska rezkalna enota 1827 pnevmatska (2 x 0,65 kW, 200 Hz, 12.000 min⁻¹) • Vertikalni sledilni valji ročno ročna nastavitev vertikalnega sledilnega valja po 0,1 mm za rezkanje previsa roba, npr. za plastične robove • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, leva rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Rezkar, diamantni Ø 56 / 60 mm, Z = 2, R = 2,0 mm, desna rotacija Diamantno prevlečen, kompakten rezalni alat s CM tehnologijo (LEUCO sistem), vgrajeno odsesavanje ostružkov, patentiran ProLock-E • Kotna kopirna enota 1832 (1 x 0,35 kW, 200 Hz, 12.000 min⁻¹), za debelino roba do 3 mm • Rezkar, diamantni Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, s CM tehnologijo (LEUCO sistem) in integriranim odsesavanjem ostružkov za profilirno enoto 1832 • Strgalo 1929 pnevmatsko vključno s pnevmatsko nastavitvijo (ločen za zgoraj in spodaj) • HW obojestranska rezila za nosilec strgala 1929 / 1927 R = 2,0 mm (potrebni 2 kosa) • Ravno strgalo 1964 Odstranjevanje ostankov lepila za čist lepljen spoj. • Polirna enota 1940 (2 x 0,12 kW, 50 Hz, 1400 min⁻¹) Za končno čiščenje in poliranje robov. Z 2 tekstilnima diskoma, vrtljiva od 0–5°

Stanje: dober (rabljeno),

Stanje: rabljeno, Leto izdelave: 2006, Used machine Rjdpfx Aswka H Sebpjcb Year of manufacture: 2006 Condition: completely overhauled Equipment and technical specifications: - with new glue application system - Infeed fence adjustable manually - Milling unit 1961 - Edge feeding unit 1903 - Glue application station 1906 with sensor-controlled nozzle - Pressure unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M for radius, bevel, flush trimming - Complete air nozzle assembly - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Complete safety hoods - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edgeband thickness, depending on equipment: 0.4–5 mm - Max. edgeband height: 55 mm - Edgeband strip length: min. 350 mm - Edgeband overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing/milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Jointing/milling unit: 1490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Jointing/milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes Rcodpewka Upjfx Abpeb - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: nepreverjeno, Robna lepilka HOLZ-HER Sprint 1329 Premium - Letnik 2015 - Na voljo takoj - Vključno z zračno mizico - Sistem kartuš & granulat - Zaslon na dotik - Spojevanje Rsdpfxey S Habj Abpjcb - Lepljenje: GlueJet sistem - Odrezovanje (2 motorja) - Multifunkcijsko rezkanje - Kopiranje vogalov (2 motorja) - Noži za radij & površine - Poliranje/švabljanje

Leto izdelave: 2016, stanje: dober (rabljeno), Za poizvedbe: Zoltán Utasi +36 30 205 7380 • Debelina robnega traku (navit robni trak): 0,4 - 3 mm • Debelina robnega traku (rezani robni trak): o maks. 3 mm z enoto FF701 o maks. 8 mm brez enote FF701 o maks. 15 mm možno s spremembo orodja na rezalni enoti • Višina roba: maks. 65 mm • Debelina obdelovanca: 8 - 60 mm • Širina obdelovanca: min. 65 mm • Dolžina obdelovanca: min. 160 mm • Hitrost pomika: variabilna 10 - 18 m/min LUMINA 1380 Ltronic, motorizirana električna nastavitev pritisnega mostu Avtomatsko mazanje transportne verige Priprava za RETURN-povezavo Električni pogon za variabilni pomik 400 V / 50 Hz, 2,2 kW Upravljanje Edge Control 19 z 18,5" zaslonom na dotik ECO MODE varčevalni način Predrezalna enota 1802 z dvema rezkalnima agregatoma Podajalnik robnih trakov MG701 SYNCHRO za avtomatski transport zvitih in segmentnih trakov Ltronic LT702 NIR+ laserska robna enota Sistem nanosa lepila Glu Jet GJ302, avtomatski motoriziran, samodejna regulacija višine nanosa lepila (sledilna šoba) (EVA, PUR) Rins posoda za Glu Jet Voz voziček GJ302 Voz voziček LT702 Pritisni del 1913 MOT: prvi valj pogonsko gnan, 2 podpritisna valja Razpršilna enota po pritiskalni enoti za nanos antistatičnega hladila Rcedpfx Abowkf Twjpeb Obrezovalna enota 1918 (60 mm), pnevmatska Obrezovalna enota FR701: brez zračnosti, 6 popolnoma digitaliziranih NC-servos osi zagotavlja natančnost ponovitve Obrezovalna enota FF701: brez zračnosti, 4 popolnoma digitalizirane NC-servos osi zagotavlja 100% ponovljivost s pritiskom na gumb Rezkalna enota 1929 MOT4 z motornim pomikom za vodilne valje Brisalna enota FK701 s pred- in po-sledilno napravo za odstranjevanje odvečnega lepila vzdolž celotne plošče in za čist lepilni spoj Razpršilna enota 1856 za vhodno in izhodno območje Polirna (buffing) enota 1940 za čiščenje in poliranje robov

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2010, dolžina tovornega prostora: 7.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.650 mm, skupna dolžina: 12.460 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, velikost pnevmatike: 385/65R22.5, stanje pnevmatik: 40 odstotek, barva: bela, Leto izdelave: 2010, Oprema: ABS, dvižna zadnja plošča, Konfiguracija osovina Dimenzije guma: 385/65R22.5 Zadnja osovina 1: profil gume: 40%; redukcija: jednostavna Zadnja osovina 2: profil gume: 40%; redukcija: jednostavna Zadnja osovina 3: profil gume: 50%; redukcija: jednostavna Težine Prazna masa: 9.220 kg Nosivost: 30.280 kg Rcjdpfx Aey Udp Sjbpeb Dozvoljena ukupna masa: 39.500 kg Funkcionalno Podizna platforma: DHOLLANDIA Marka nadogradnje: Heiwo Stanje Oštećenja: nema = Informacije o kompaniji = Heisterkamp Used Trucks BV ne prodaje samo polovne kamione – mi smo pouzdan deo Heisterkamp Transportation Solutions. Brinemo o polovnim kamionima i prikolicama koji su odmah spremni za upotrebu. Sa naše lokacije u Oldenzaalu pažljivo biramo vozila koja su pouzdana, ispunjavaju savremene zahteve i odgovaraju visokim standardima naše industrije. Detalji - Adresa: Hanzepoort 25E, 7575 DB Oldenzaal, Nizozemska - Telefon: - E-mail: - Website:

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Condition: Good (Machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and glue dosing control; automatic, program-dependent fine adjustment - MOT SPS INFEED FENCE ADJUSTMENT - Automatic chain lubrication: intelligent automatic transport chain lubrication - Edge Control 19 controller - EL GRM graduated 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ - Edge Control 19 controller with 18.5" touchscreen color display 16:9 - ECO MODE energy-saving mode This energy-saving mode is an automatic standby function - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left rotation Air Stream System (HOLZ-HER / LEUCO patent) - Cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, right rotation Air Stream System (HOLZ-HER / LEUCO patent) - Edge feeding 1901 SYNCHRO Automatic transport of coil and strip materials - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 PLC MOTOR. SPRINT MOTORIZED - Spray system GM501 after pressure unit with lubricant Recommended for high gloss edges - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically swiveling 0/10° - Milling unit FR701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z=2+2 - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z=2+2 - Profile milling unit FF701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Rcjdpfxoy Hyl Ts Abpeb - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z=4 Radius R = 2 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z=4 Radius R = 2 mm, right rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of tracing rollers - HW reversible blades for scraper holder R = 2.0 mm (2 pieces required) - Flat scraper FK701 With preliminary and final tracing for removing glue residue - Spray unit TR501 for infeed and outfeed (separating agent + cleaning agent) - Including nesting shoes below with dedicated spray unit Location: Hesse Availability: Approx. July 2026

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: WFDFLT33902030059, lastna masa: 7.452 kg, največja dovoljena obremenitev: 27.548 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: črn, Leto izdelave: 2023, The images are archive photos; the vehicle may still be in use! Weights and dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Specified fifth wheel load permissible / technical: 11,000 / 12,000 kg Unladen weight (standard version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Coupling height approx.: 1,130 mm Kingpin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis: Semi-trailer for freight forwarding High-tensile steel welded lightweight construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Lashing ring preparation laterally in the floor (max. 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, no load equalizer Pull-out ladder at the rear Door retainers on the sides Wheel chocks with holders Side underrun protection made of aluminum Steel underrun protection with wide Fliegl mud flaps Foldable fender for light unit Quarter shell mudguards Rear impact guard Axles & Suspension BPW disc brake axles Air suspension 1st axle is an automatic lifting axle with forced lowering and start-up aid, activated via triple brake application Brake system 2-line compressed air braking system Colored line routing for easier maintenance Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Flow rate: 110 l/min Rodpfowk Dc Rsx Abpocb Pressure: 250 bar Oil reservoir minimum: 100 l SB Body Box-shaped aluminum body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow profiles, welded all-around with a large special reinforcement profile at the top, with a special subframe welded in at the bottom. Moving wall for improved unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made from aluminum hollow profiles, as two-leaf doors, split 1/2 to 1/2, all-around with special U-profile with stop and rubber gasket, fitted with 2 external rotary bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in driving direction. With pivoting transverse brace at the top. Standing platform with ladders on both sides (left/right in direction of travel) and railing for opening and closing the sliding roof tarp. Removable, swiveling cross bars for tarp support + tarp support at front bulkhead and rear wall. Sliding tarp can be rolled to one side with 2 longitudinal tensioning straps, 3 side ratchet straps. At the front bulkhead and above the rear doors, the tarp is secured with hooks and rubber

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, številka stroja/vozila: 221/2-306, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 207 h, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 920 mm, pomik po osi Z: 70 mm, dolžina obdelovanca (maks.): 1.000 mm, število osi: 3, število mest v zalogovniku orodij: 4, skupna višina: 2.500 mm, skupna dolžina: 1.500 mm, skupna širina: 2.500 mm, skupna masa: 3.000 kg, Oprema: CE označba, dokumentacija / priročnik, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediate High-performance industrial vertical CNC machining center suitable for processing wood and laminated panels, for cabinet furniture and other milling tasks. Key features: - Vertical machining with high-precision vacuum clamping system (including complimentary vacuum cups) - Rear clamping for machining the entire perimeter of the workpiece, workpiece fixation without flipping - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible PC unit Technical specifications: - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: Rcedoy Eygnopfx Abpjb - Vectorial: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining unit: - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL drilling unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y axis Software and control: - Full CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment: - ECO vacuum system (8 m³/h)

Stanje: rabljeno, največja dovoljena obremenitev: 6.100 kg, skupna masa: 8.900 kg, konfiguracija osi: 2 osi, prva registracija: 10/1998, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 42 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 1998, 2-Axle Fliegl TPS 89 Pr.+Pl. Trailer with Drop Sides VIN: W1F20917 Rsdpsy Rgyrjfx Abpocb Chassis / Attachments: * Air suspension with lift and lower function * Tyres: 215/75 R17.5 * Remaining tread: front approx. 30/60%, rear approx. 70/40% * Spare wheel mount * 1x Haacon landing leg * 2x rear support legs Body: * Fliegl Pr.+Pl. with drop sides * 60 cm drop sides * 4 tie-down points per side * Dimensions: 6,200 mm x 2,480 mm x 3,020 mm * Approx. 68 m³ – 22 pallets Weights: * Gross weight: max. 8,900 kg – derated to 4,500 kg * Unladen weight: 2,800 kg * Payload: 6,100 kg Miscellaneous: * German vehicle New main inspections / safety checks or adjustments to weight (derating/uprating) are available on request. We are happy to assist you in obtaining export/temporary registration plates, and vehicle delivery within Germany is also possible. Please contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for misprints & typographical errors; subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-operated company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in both new and used commercial vehicles. Our 11,000 sqm site features a wide selection of vehicles. Our corporate philosophy is defined by fairness and integrity. Since customer satisfaction is our top priority, we offer an excellent all-round service package and provide a knowledgeable contact person to support you throughout the purchase or sale of your vehicle. See for yourself! Our service for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist in organizing special transports. Temporary/export registration plates We are happy to assist you in obtaining export or temporary registration plates. Handling customs formalities We are happy to assist you with customs procedures.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Robna rezkalnica z 3-valjnim podajalnikom Holz Her, 30 mm vreteno, 50 mm širina rezkanja, dimenzije stroja: 1000 x 1000 x 1300 mm, teža 250 kg, v dobrem stanju, popolnoma delujoča. Rcodpfjvkgdrox Abpjb Pošiljanje možno za doplačilo! Zaradi starosti rabljene naprave je pri prodaji poslovnim strankam izključena garancija.

Stanje: rabljeno, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 11/2004, skupna dolžina: 12.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, medosna razdalja: 8.000 mm, barva: drugo, Leto izdelave: 2004, Oprema: ABS, = Druge možnosti in oprema = Rjdpfxey Ultfo Abpjcb - Dvižna os - Zračno vzmetenje - SAF osi - Kolutne zavore = Dodatne informacije = Dimenzija pnevmatik: 385/65 Znamka osi: SAF Zadnja os 1: Max. obremenitev osi: 9.000 kg Zadnja os 2: Max. obremenitev osi: 9.000 kg Lastna teža: 6.890 kg Nosilnost: 23.110 kg Skupna masa: 30.000 kg Tehnični pregled: veljaven do 03.2027 Registrska številka: OH-89-SN

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, - PVC Primus, 3 mm PVC kasetni sistem - Lepljenje, porezovanje poravnano, poravnalno rezkanje, posnetje robov, radijsko rezkanje - Strgalo, polirni agregat - Dimenzije: 4700 x 1400 x 1650 mm - Teža: 1300 kg - Delovne dimenzije: Dolžina 4500 mm Globina 1020 mm Višina 1630 mm - Priključni nastavek: 140 mm Ø - Širina obdelovanca: min. 60 mm - Pomikalna hitrost: 11 m/min - 6 bar - 400 voltov, stisnjen zrak - Debelina robnega traku 8 mm pri trakastem materialu, 2 mm pri kolutnem materialu - BREZ predrezkalnega agregata - Pnevmatski cilindri novi Pošljemo po dogovoru za doplačilo! Zaradi starosti rabljene stroja je pri prodaji poslovnim kupcem izključena garancija. Rsdpfxowv Uq Ao Abpjcb

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 01/2014, dolžina tovornega prostora: 13.660 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.810 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 50 odstotek, medosna razdalja: 9.000 mm, barva: drugo, Leto izdelave: 2014, Oprema: ABS, = Dodatne možnosti in oprema = - BPW osi - Dvižna os - Zračno vzmetenje - Kolutne zavore = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 Znamka osi: BPW Zadnja os 1: Maks. obremenitev osi: 9.000 kg; Profil pnevmatike: 50% Zadnja os 2: Maks. obremenitev osi: 9.000 kg; Profil pnevmatike: 40% Zadnja os 3: Maks. obremenitev osi: 9.000 kg; Profil pnevmatike: 40% Teže Lastna teža: 5.880 kg Nosilnost: 33.120 kg Skupna dovoljena masa: 39.000 kg Vzdrževanje Tehnični pregled: veljaven do 03.2027 Rodpfxoy Ulqdo Abpocb Identifikacija Registrska oznaka: ON-68-FS

Stanje: rabljeno, Holz Her CUT 6120 Heavy-Duty Precision High-Performance Panel Saw Cutting Length: 3900 mm Cutting Depth: 3100 mm Saw Blade Projection: 82 mm Control System: CUTCONTROL 2, 17" TFT Touchscreen Powerful Optimization Software CD CUTTING-SYSTEM Label Printer 3 Air Cushion Tables, 1800 x 600 mm Automatic Angle Pressure Device up to max. 1300 mm Automatic Cut-Out Device Offcut Management Device Cable Remote Control Pneumatic Trimming Stops Main Saw Unit: 11 kW, Saw Blade Ø 350 mm Scoring Saw Unit: 2.2 kW, Saw Blade Ø 180 mm Saw Carriage Feed: 0–100 m/min, stepless Saw Carriage Return: 130 m/min Rip Fence Feed: 0–100 m/min (EU: 0–25 m/min) Rip Fence Return Feed: 100 m/min Rip Fence Clamps: 7 pcs. Compressed Air Supply: 6 bar Redpfx Abeytrvispjcb Extraction Connection (Main Machine): 1 x 120 mm Extraction Connection (Pressure Beam): 3 x 120 mm Extraction Capacity: 3500 m³/h Air Velocity: 30 m/sec Machine Dimensions: approx. 6000 x 6000 mm Weight: approx. 5,000 kg Machine from retirement / craftsman's workshop Machine is in TOP CONDITION Available ex location

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2010, dolžina tovornega prostora: 7.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.650 mm, skupna dolžina: 12.460 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, velikost pnevmatike: 385/65R22.5, stanje pnevmatik: 40 odstotek, barva: bela, Leto izdelave: 2010, Oprema: ABS, dvižna zadnja plošča, Achskonfiguration Reifenmaß: 385/65R22.5 Rjdpfxjy Twwgs Abpscb Hinterachse 1: Reifenprofil: 40%; Achsübersetzung: einfach untersetzt Hinterachse 2: Reifenprofil: 30%; Achsübersetzung: einfach untersetzt Hinterachse 3: Reifenprofil: 50%; Achsübersetzung: einfach untersetzt Gewichte Leergewicht: 9.220 kg Nutzlast: 30.280 kg zulässiges Gesamtgewicht: 39.500 kg Funktionell Ladebordwand: DHOLLANDIA Aufbauhersteller: Heiwo Zustand Schäden: keine = Firmeninformationen = Heisterkamp Used Trucks BV verkauft nicht einfach gebrauchte Lkw – wir sind ein verlässlicher Teil von Heisterkamp Transportation Solutions. Wir kümmern uns um gebrauchte Lkw und Anhänger, die sofort einsatzbereit sind. Von unserem Standort in Oldenzaal wählen wir sorgfältig Fahrzeuge aus, die zuverlässig sind, die heutigen Anforderungen erfüllen und den hohen Standards unserer Branche entsprechen. Details - Adresse: Hanzepoort 25E, 7575 DB Oldenzaal, Niederlande - Telefon: - E-Mail: - Website:

Stanje: rabljeno, Leto izdelave: 2005, Rabljeni stroj Leto izdelave: 2005 Rodpjwqifkjfx Abpjcb Stanje: vodila rahlo obrabljena, primeren samo za grobo rezanje Oprema in tehnični podatki: - Dolžina reza: 4300 mm - Največja višina prehoda: 2200 mm - Največja višina obrezovanja: 2100 mm - Največja višina vertikalnega zarezovanja: 2100 mm - Globina reza: 80 mm - Motor: 5,5 kW - Hitrost vrtenja žaginega lista: 4500 obr/min - Premer žaginega lista: 300 mm - Odsesavanje: 2 x 100 mm - Poraba stisnjenega zraka: 60 NL/min Mere: 5620 x 1480 x 2990 Razpoložljivost: takoj Lokacija skladišča: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and Technical Specifications: - Machine fully overhauled: - new Glue Jet 301 glue system (upper part 1 mm) - all units checked - all cutters sharpened - all knives replaced Redpfx Abowka Iijpocb - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical supply for variable feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 controller with 15" touchscreen - ECO MODE energy-saving function - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW, 50 Hz - Granulate storage hopper - Pressure section 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM-technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM-technology - Scraper unit 1929 MOT2: - HW reversible carbide inserts for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, številka stroja/vozila: 26, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 2.216 h, skupna višina: 1.700 mm, skupna dolžina: 6.100 mm, skupna širina: 1.450 mm, skupna masa: 2.500 kg, Oprema: CE označba, TEHNIČNI PODATKI Stroj ima naslednjo konfiguracijo: Enota za predfrezanje (orodja priložena) Enota za lepljenje (orodja priložena) Enota za kape (orodja priložena) Enota za grobo rezkanje (orodja priložena) Enota za zaobljanje robov (orodja priložena) Enota za vleko radija (orodja priložena) Enota za vleko ploščine (orodja priložena) PODROBNOSTI O STROJU Poraba toka: 39,5 A Napetost: 400 V Rcedpfx Asy Nxz Sebpob Varovalka: 50 A Dimenzije in teža Dimenzije (D x Š x V): 6.100 x 1.450 x 1.700 mm Teža: 2.500 kg Število delovnih ur: 2.216 h OPREMA CE-oznaka

Stanje: rabljeno, Leto izdelave: 2001, skupna višina: 1.750 mm, skupna dolžina: 5.650 mm, skupna širina: 1.100 mm, Teža: 1.950 kg Cena: Po dogovoru - Letnik: 2001 - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Serijska številka: 468/0-103 - Transportne mere: 5650 mm x 1100 mm x 1750 mm (d x š x v) - Transportna teža [kg]: 1950 kg - Transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena ne vključuje DDV Rjdpfx Ajxlqpdsbpocb DDV/obračun razlike v ceni: DDV je odbiten za podjetja Dostava in prevzem v račun možno kadarkoli za vse iz industrijske sfere Yorick Diebels

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.010 mm, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50R19,5, barva: drugo, Leto izdelave: 2023, Oprema: ABS, = Additional Options and Equipment = - EBS = Remarks = Number of axles: 3, Curb weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of bodywork: 2023, Side wall material: Tarpaulin, Customs cord, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 5 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 10 mm Axle 3: Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 95 cm Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates quickly arranged • Professional technical services • The safety of “recognizable quality” • And more.... Rcsdpfx Abey N Rnkspob Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.