Festo Dsnu-20-35-Ppv-A Hub 35 Mm nakup rabljenega (124.089)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.100 kg, največja dovoljena obremenitev: 34.900 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mounts: 1 x 20-foot container central (or swap body container 7.15 / 7.45 m), fixed at the front, container lock twistlocks in extended version 24 t 2-speed landing gear, single-sided operation with anti-spray mudflaps according to EC standards Stainless steel drip tray with 1 1/4" drain pipe + 1 1/4" shut-off valve, incl. drip plate, perforated tread plates approx. 400 mm wide, left & right between drip tray and main longitudinal beam 4 hose racks approx. 4,500 mm long (hose box) for hose tubes: 2 x DN 200 outside + 2 x DN 160 centred, rear hose box (stainless steel) 300 mm deep, splash water protected, lid (stainless steel) all-round rubber seal, drainage hole at lowest point, then without lid on hose tubes 1 stainless steel grounding lug at the rear right side of the frame, with international grounding sticker on the frame Access steps right rear on underrun guard, rear right outside on main beam with tread plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment: reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and start assist, operated by 3x brake activation Braking System 2-line air brake system Colour-coded pneumatic lines for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: Trailer must only be towed by tractors that ensure ABS functionality! Nwodpfoi Rixksx Anpsn With lift & lower valve Vehicle stability control system Axle load recognition via EBS CAN-bus signal, for display in cab (truck must be pre-equipped), not calibrated as a weigh scale Wheels and Tyres 385/65 R22.5, manufacturer as per supplier’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red marker lights at rear 1 x 15-pin socket at front, without connection cable Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight within the permissible axle/support/kingpin loads may not be achievable (poor driving and trailing performance may result from incorrect load distribution) This vehicle may only be loaded with 20’ tank containers complying with ISO 668 and especially ISO 1496-3! Tank containers must have 'end-load-transfer areas' (end transverse beam load transfer areas)! Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate to ECE 70 Inspection according to ADR sec. 9.1.1.2, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3), with warning panel at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Conspicuity marking with reflective tape

Stanje: rabljeno, Pneumatic Cylinder, Compact Cylinder - Stroke: 290 mm - Piston rod diameter: Ø 16 mm - Quantity: 2 units available - Price: per item - Dimensions: 40/62/H467 mm - Weight: 2 kg Nodped Sti Nsfx Anpjwn

Stanje: zelo dobro (rabljeno), Maximum welding current: 5 kA Welding force: 45–150 N Closing stroke: pneumatic Welding pressure: pneumatic, secondary adjustment unit with disc spring Force adjustment: proportional valve Electrode design: cylindrical, 6 mm diameter --- Welding control unit: optional (as recommended) --- Equipped with: Njdpfx Anotq Ez Eepjwn - Main body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder - Upper welding head F120K with secondary adjustment unit - Pneumatic valve units - Pneumatic air cooling system for electrodes - Workpiece carrier on dovetail guide for precise positioning with respect to electrodes --- Warranty: 6 months --- Training & commissioning available upon request --- Spot welding electrodes & spare parts available from stock --- Further information available on our website

Stanje: rabljeno, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston - Stroke: 80 mm - Piston diameter: 63 mm - Piston rod: 20 mm - End-position cushioning: adjustable on both sides - Max. pressure: 12 bar - Price: per unit - Quantity: 1 unit - Dimensions: 285/75/H75 mm Njdjfbcl Aspfx Anpjwn - Weight: 2.35 kg/unit

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: CR-Lack DK solo, Demag verižni dvigalni žerjav, dvižni mehanizem 1x 2500 kg, DKUN20-1250 K V1F4 Nosilnost 1x 2500 kg / 2,5 t, nosilnost / dvigala – 2-verižna Na voljo 5 verižnih dvigal!!! z gibljivim pogonom vozička, podvozja pripravljena za montažo na nosilce HEA/HEB/HEM (širina prirobnika 300 mm) z 2 hitrostmi dviganja, višina dviganja 7 m!!! z nadzorno ploščo na tleh Dolžina dvižnega mehanizma približno 1,25 m Skupna teža približno 250 kg, priključitev na 400 V 50 Hz Odlično stanje, popolnoma delujoče Lokacija izdelka je 75053 Gondelsheim Nedpfx Aezv H Htonpown Glejte slike.

Stanje: dober (rabljeno), Pneumatic cylinder, air cylinder, standard cylinder - Stroke: 1400 mm - Piston rod: Ø 15 mm - Piston rod thread: M12 x 1.5 mm - Pressure: max. 12 bar Nedpfxjd Rz Dwo Anpewn - Dimensions: 1570/50/H50 mm - Weight: 8.1 kg

Stanje: dober (rabljeno), Vpenjalni cilinder, hidravlični vpenjalni cilinder, hidravlični vpenjalec, pnevmatski vpenjalec, zračni cilinder, vpenjalni cilinder za silovno vpenjalno glavo, hidravlični cilinder - Proizvajalec: WMW, vpenjalni cilinder hod 20 mm - Tip: 25 TGL 30-7311 - Gred Ø 14 mm Nwodpfx Aswzillsnpon - Količina: 16x vpenjalnih cilindrov na voljo - Cena: na kos - Dimenzije: Ø 35 x 127 mm - Teža: 0,6 kg/kos

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2005, številka stroja/vozila: HN-BB, obratovalne ure: 12 h, Žerjav Kranhimmel, mostni žerjav, dvigalni žerjav, žerjav za hale Nosilnost / obremenitev 3,2 t - 3200 kg Širina tirnice 9600 mm, zunanja mera pribl. 9800 mm Letnik izdelave 2005 Višina dviga 6 m Višina zgornjega roba žerjava do kljuke pribl. 600 mm Dolžina zgornjega nosilca z blažilnikom pribl. 2450 mm Žerjav je razstavljen in je takoj na voljo. Nedpfxszunz As Anpjwn Obstajajo naslednje napake: 1) Manjka krmilni blok – shema je na voljo 2) Ohišja priključnih vtičnic dvigalnega mehanizma in pogonskih motorjev so delno poškodovana (precej tanka plastika) Rabljen Na voljo so tudi stebrični vrtljivi žerjavi in stenski vrtljivi žerjavi. Demag KBK in Abus HB sistemi, pa tudi Errikla, Hadef, Stahl KT 2000 itd. Pošiljanje je možno preko špediterja, prosimo, vprašajte za poštno številko. Prednost imajo osebni prevzem.

Stanje: dober (rabljeno), Krmilnik motorja, krmilnik, pretvornik, krmilnik korakov, krmilnik stopničastega motorja, frekvenčni pretvornik, krmilnik motorja, krmilnik servo pogona -Proizvajalec: Festo, krmilnik motorja -Tip: CMMS-AS-C4--3A G2 572986 -Število: 2 krmilnika na voljo -Cena: na kos -Dimenzije: 310/60/V180 mm Nwsdpfx Anjp E Hz Tjpen -Teža: 1,4 kg/kos

Stanje: pripravljen za uporabo (rabljen), Festo EMMS-AS-100-S-HS-RMB 550125, serijska številka servomotorja J8N4265, rabljen, v dobrem stanju, 100-odstotno deluje, obseg dobave glede na fotografije. Nwodpfx Aszzuqdjnpen

Stanje: rabljeno, Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram Nsdpfxod Al Hre Anpswn - Hydraulic cylinder sourced from a Hitachi Seiki HC400 machining center - Piston diameter: approx. 35 mm - Piston rod diameter: 16 mm - Stroke: 440 mm - Dimensions: 44 x 44 x H610 mm - Weight: 3.6 kg

Stanje: pripravljen za uporabo (rabljen), Festo EGSL-BS-55-250-5P / 562229 linearni pogon, serijska številka: 12081, rabljen, dobro ohranjen, 100% delujoč, obseg dobave v skladu s fotografijami. Njdpfx Asx Erndenpewn

Stanje: dober (rabljeno), Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke: 50 mm - Piston diameter: Ø mm - Piston rod: 20 mm (connection thread M 16 x 1.25) - Total length: 230 mm - Total length extended: 280 mm Nedpfsb A S D Hsx Anpewn - Air inlet and outlet: adjustable - Quantity: 3 pieces available - Price: per piece - Weight: 1.6 kg/piece

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Roller track, used Frame colour: galvanized Frame profile: approx. 35 x 28 mm (W x H) Roller colour: similar to cream white Total length: approx. 2,025 mm Total width: approx. 35 mm Roller width: approx. 17 mm Roll spacing: approx. 25 mm Roller diameter: approx. 25 mm Total height: 35 mm Roller material: plastic General information about the item: This item is only available for collection. If additional transport or shipping of this item is required, extra costs will apply. These can be requested from us separately depending on the place of delivery or the scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly terms and conditions apply Racking inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 (visual inspection) for all racking systems Nsdpfx Anohhyprspswn Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), We offer here a used shelf connector for sale. The scope of delivery includes: 01x Shelf connector, used Material finish: Sendzimir galvanized Shelf spacing: approx. 150 mm Profile: approx. 35 x 25 mm Weight per piece: approx. 0.214 kg Nsdod Tyhvepfx Anpewn 02x Hexagon bolts, M10 x 35 02x Hexagon nuts, M10 02x Washers, M10

Stanje: dober (rabljeno), Pneumatic cylinder, flat cylinder, pneumatic actuator, plunger, flat cylinder - Stroke length: 1070 mm - Piston rod: Ø 20 mm - Pneumatic cushioning: adjustable on both sides - Price: per piece Nwedjfngxaopfx Anpsn - Quantity: 2 pieces - Dimensions: 1250/100/H45 mm - Weight: 7.4 kg/piece

Leto izdelave: 2000, stanje: rabljeno, številka stroja/vozila: SIxx, Demag chain hoist crane lifting unit 5000Kg DKUN 20-2500 K V1 F4 Nwjdpfx Ajrft Nzsnpon Load capacity 5000 KG / 5t load / lifting capacity – 2-fall configuration Equipped with 2 lifting speeds, lifting height approx. 6 m Supplied without pendant control, complete with suspension eye and chain container Previously used as a spare hoisting unit for an overhead travelling crane Total weight approx. 120 kg, connection: 400V 50Hz Used condition Item location: 75053 Gondelsheim See pictures

Stanje: pripravljen za uporabo (rabljen), * Znamka: Siebtechnik * Tip: 20/35-1 * Površina: 3500 x 2000 mm – 1 paluba * Pogon: 11 kW električni motor. Nsdpfxoywmxbs Anpown

Stanje: dober (rabljeno), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder, clamping cylinder Njdov Rahdopfx Anpewn - Manufacturer: Festo, standard cylinder type DGS-25- - Stroke length: 70 mm - Piston: Ø 25 mm - Piston rod: Ø 10 mm / M10 - Mounting hole: Ø 13 mm - Max. pressure: 12 bar - Dimensions: Ø 33 x 208 mm - Weight: 0.6 kg

Stanje: dober (rabljeno), Linearni pogon, linearni menjalnik, dvižni menjalnik, vreteni pogon, pnevmatski pogon, voziček, vodilo, elektromehanska linearna os, mini voziček, mini voziček -Proizvajalec: Festo: Mini voziček tip DGST-16-125- -Hod: 125 mm -Gredi: Ø 6 mm -Količina: 2 vozička na voljo -Cena: na kos -Dimenzije: 210/85/H40 mm -Teža: 1,4 kg/kos. Nsdpoxwvh Ajfx Anpewn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side Nwsdpfxsh Ek Das Anpen - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: dober (rabljeno), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders - Manufacturer: Yale, double-acting hydraulic cylinder, stroke 250 mm Nsdekahk Iepfx Anpjwn - Model designation: H-20/250 - Piston rod diameter: Ø 42 mm - Lifting capacity: 20 t - Operating pressure: max. 700 bar - Dimensions: Ø 85 x 455 mm - Weight: 14.1 kg

Stanje: dober (rabljeno), Clamping Cylinder, Hydraulic Clamping Cylinder, Hydraulic Clamps, Pneumatic Clamps, Pneumatic Cylinder, Clamping Cylinder for Power Chucks, Hydraulic Cylinder - Manufacturer: WV Lenze, Clamping Cylinder Stroke 20 mm - Model: 40 TGL 30-7312 - Shaft diameter: 25 mm Nwsdpfxowzh R Tj Anpjn - Quantity: 8 clamping cylinders available - Price: per unit - Dimensions: Ø 70 x 133 mm - Weight: 2.8 kg/unit

Stanje: dober (rabljeno), Linearni pogon, linearni menjalnik, dvižni pogon, vretenasti pogon, pnevmatski pogon, drsnik, vodilo, elektromehanska linearna os, mini drsnik, mini drsnik Nedpfxoyw I U De Anpswn -Proizvajalec: Festo: mini drsnik tip DGC -Hod: 460 mm -Količina: 1x drsnik na voljo -Dimenzije: 650/50/V70 mm -Teža: 2,4 kg

Stanje: dober (rabljeno), Short-stroke heavy-duty cylinder, high-pressure hydraulics, compact cylinder, lightweight alloy cylinder, high-pressure cylinder, universal cylinder, hydraulic cylinder, straightening cylinder, hydraulic ram, hydraulic pressure cylinder, lifting cylinder -Hydraulic cylinder: Lifting cylinder 759 A17 20 T Nedpohmc Aijfx Anpown -Stroke: 200 mm -Piston: Ø 62 mm -Quantity: 2 cylinders available -Price: per unit -Dimensions: Ø 110 x 365 mm -Weight: 12 kg/unit.