Ermak Stiskalnica nakup rabljenega (2.921)

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; Nsdpfsiidm Nex Anpelh - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, TECHNICAL DATA Press force 30 t Nlodpfxsi Amnpe Anpsh Maximum load (prism jaw) 7.5 t Ram stroke 160 mm Ram travel 550 mm Dimensions and weight Length (product) approx. 1240 mm Width/Depth (product) approx. 650 mm Height (product) approx. 1920 mm Weight (net) approx. 280 kg Clear width 790 mm Maximum installation height 1030 mm Frame depth 200 mm SCOPE OF DELIVERY 2-piece prism set for holding round material Hand and foot lever Winch for raising and lowering the table Location: Ex works - available at short notice -

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Nodpow Sgnkefx Anpslh Availability: short-term

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Nlodpsb Eln Defx Anpeh Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: dober (rabljeno), Leto izdelave: 1964, Tlačna zmogljivost: 5 t Nastavljiv hod: 8 - 50 mm Nastavljivost bata: 25 mm Teža: pribl. 500 kg Nljdpfx Aey D Abfsnpoh Dodatna oprema / Posebne značilnosti: • Nastavljiva miza • Nožno upravljanje Siegfried Volz Orodni stroji Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Nemčija

Stanje: rabljeno, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Fino granulirano biomaso obdelajte v enakomerne pelete s pomočjo celotnega sistema za izdelavo pelet: stiskalnica za pelete, zalogovnik materiala, rotacijski sit s transportnim trakom in sistem za ravnanje z velikimi vrečami – vse od enega proizvajalca. Ta sistem EcoKraft-RP22 je zasnovan na modelu RP22 druge generacije za fino granulirano biomaso, z integriranim sistemom za sesanje pare iz stiskalne komore in dvema centralnima mestoma za mazanje: je kompakten in enostaven za uporabo. Na voljo je samo en sistem. Gre za rabljeno napravo, brez stalne zaloge. Ko je enkrat prodana, je ni več. Datumi prevzema in transporta so omejeni (samo stiskalnica: 650 kg). Primerno za: izdelavo pelet iz fino granulirane biomase (npr. mešanice gnojil, lesa ali rastlinskih vlaken) v zaprtih prostorih, zaščitenih pred vremenskimi vplivi, z 400 V trifaznim napajanjem. Ni primerno za: uporabo na prostem, neprekinjeno delovanje brez nadzora ali okolja, kjer obstaja nevarnost eksplozije (standardno ni zaščite pred eksplozijo). Kaj pomeni oprema v praksi: Stiskalnica RP22 GEN2, maks. 22 kW: zmogljiva za fino material, z sistemom za sesanje pare iz stiskalne komore Zalogovnik 1 m³ z izpustnim vijakom in senzorjem nivoja: senzor oddaja signal za vklop/izklop in nadzoruje polnjenje stiskalnice Vibracijske blazinice s stisnjenim zrakom: preprečujejo nastanek trdnih gruč v zalogovniku Rotacijski sit s transportnim trakom: ločuje drobne delce in jih zbira v veliko vrečo Celoten paket (kot ga dostavlja EcoKraft AG): Stiskalnica za pelete RP22 z avtomatskim centralnim sistemom za mazanje Pnevmatski sistem za podmazovanje za 18 kg vedra, vključno z 18 kg vedrom s hrano primerno maščobo Digitalna črpalka za doziranje vode 54 l/h Matrica 6x20 mm, 45° predkompresija Zalogovnik materiala 1 m³ z izpustnim vijakom, senzorjem nivoja in vibracijskimi blazinicami Rotacijski sit s transportnim trakom, sita 6 mm + 4 mm Stojala za velike vreče: 1x Vario 1.0 in 3x Vario 1.5 (zlagajo se) Velike vreče: 1x 90x90x110 cm in 5x 95x95x150 cm Nsdpfx Ajz Rwimjnpelh Tehnični podatki: Stiskalnica: 1,70 x 0,80 x 1,70 m, 650 kg, maks. 22 kW, 63-A-CEE vtič (potrebna 50-A varovalka), carinska tarifna številka 84793010 Rotacijski sit: Ø300 x 1200 mm, nastavljiva višina, stranski vnos z leve ali desne strani, maks. višina izmeta 1800 mm Transportni trak: dolžina 3600 mm, višina izmeta 2600 mm, širina traku 150 mm, 49 pritrdilnih elementov, 0,75 kW Proizvajalec: EcoKraft AG, Nemčija, z izjavo o skladnosti CE Stanje: rabljeno. Kupljeno v skoraj novem stanju, nato pa je bilo uporabljeno približno 500 delovnih ur. Zalogovnik je demonstracijski model z manjšimi znaki uporabe. Lokacija: 6064 Kerns (osebni prevzem, transport po dogovoru). Cena: 70.000 EUR. Zakaj lahko kupujete z zaupanjem: približno 500 delovnih ur v lastni uporabi, popolna oprema, dokumentacija proizvajalca na voljo, ogled v Kernsu po dogovoru. Pred nakupom preverite in preizkusite: ob ogledu ali prevzemu lahko preverite identiteto, stanje, celovitost in funkcionalnost. Zagotavljamo, kar preverimo: sistem je tak, kot ga opisuje ta oglas, je celoten in deluje, ko ga vidite. Ne obljubljamo zmogljivosti ali kakovosti peletov za vaš material, zato najprej povprašamo o vaši uporabi. Bonus za hitre odločevalce: kupite do 27. oktobra 2026 in prejmite 2.000 EUR popusta, torej 68.000 EUR namesto 70.000 EUR. Velja do 27. oktobra 2026 ali dokler sistem ni prodan. Naslednji korak: pošljite nam vaš material, zahtevano kapaciteto in ciljno lokacijo. Potrdili bom

Stanje: dober (rabljeno), Leto izdelave: 2018, CNC upogljalni stroj Proizvajalec: SMD Yawei Tip: PBB-630/6200 Letnik: 2018 CNC krmilnik: CYBELEC ModEva 15 Sila upogibanja: 6.300 kN Delovna širina: približno 6.200 mm Nlsdpfxerivu Se Anpjh DSP-laser-TX Priključna moč: 400 V / 95 kVA 191026ä

Stanje: zelo dobro (rabljeno), Kataloška številka 7737 TEHNIČNI PODATKI – sila stiskanja: hidravlična – oblika briketa: okrogla – premer briketa: 70 mm – premer rezervoarja: 1000 mm – zmogljivost: približno 70 kg/h – avtomatsko delovanje stroja – motor: 5,5 kW – dimenzije (dolžina/širina/višina): 1800 x 1150 x 1540 mm – teža: 900 kg Nlsdpfxjzrnvzj Anpsh PREDNOSTI – izdelano v Italiji – rabljena briketirna naprava – dokumentacija DTR – zelo dobro stanje Neto cena: 34900 PLN Neto cena: 8116 EUR, odvisno od menjalnega tečaja 4,30 EUR (Cene se lahko spreminjajo glede na večje nihaje menjalnega tečaja)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold anodized platens Touch display control - Electric heating platens: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm - Opening height: 350 mm - Loading possible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW - Electric heating platens made of solid hard aluminum with integrated heating wires - Heating capacity: 22 kW - High-pressure insulating panels - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Meets CE safety regulations Standard features: - Movement of the press table via rack-and-pinion and parallel guides on 2 corners of the press table made of self-lubricating material - Electronic control unit with touchscreen for machine control and monitoring - Digital timer for pressing time setting and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for pressing time selection - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety support for lower press table Integrated accessories: - Touch Screen TS/400 - EFC Electronic flatness control - Gold anodized heating platens (Busse) Location: Ex stock 54634 Bitburg Nedpfx Ajdx R Tfenpjlh - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 540 h, stiskalna sila: 1.000 t, hod: 800 mm, hitrost vzvratne vožnje: 150 mm/s, širina mize: 2.300 mm, dolžina mize: 3.000 mm, skupna dolžina: 4.500 mm, skupna širina: 3.500 mm, skupna višina: 6.000 mm, skupna masa: 101.000 kg, delovna višina: 1.300 mm, delovno območje: 1.300 mm, Hidravlična stiskalnica 1000t - v zelo dobrem stanju, uporabljena za štancanje prvih serij delov s progresivnimi orodji - to napravo smo kot novo kupili za 340.000 EUR leta 2019 Nlodpsyilh Isfx Anpeh

Stanje: rabljeno, Leto izdelave: 2001, Nosilnost 200 t Površina pritrditve na mizi 1600 x 1300 mm Hod bata 600 mm Vgradna višina 900 mm Sila vlečnega valja 80 t Hod vlečnega valja 150 mm Površina vlečnega valja 1200 x 750 mm Razdalja med stojali 1650 mm Višina mize nad tlemi 1060 mm Površina bata 1600 x 1300 mm Količina olja 1400 l Višina nad tlemi 3500 mm Hitrost hitrega premika 400 mm/s Hitrost vlečenja 42 (80 t) mm/s Hitrost vlečenja 20 (200 t) mm/s Hitrost povratnega giba 325 mm/s Krmilni sistem Siemens Skupna poraba moči 75 kW Nlsdpfx Aoz St Izenpjh Teža stroja približno 20 t Opremljen z vlečnim valjem (80 t) v mizi, optičnim senzorjem in krmilnim sistemom Siemens za stiskalnico.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Cena od 3.200 EUR Nedpfxog Uk Eij Anpelh Pritisna stiskalnica je idealna za lepljenje do dimenzij 4200 x 500 x 70 mm. Zelo praktična in prihrani veliko prostora. 15 stiskalnih valjev (membranski valji) Hod stiskalnega valja: 70 mm, stiskalna sila na valj: 6800 N 16 pritrdilnih elementov Dimenzije za transport: D 4,5 x Š 1,1 x V 0,5 m Lastna teža: približno 600 kg

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Nledpfxsyb Syke Anpoh Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Nodpfxeyb Syqs Anpelh Država porekla Turčija Cena 25.200 € Leasing rata 481,32 € Dolžina upogibanja 1050 mm Maks. zmožnost upogibanja – konstrukcijsko jeklo 2,5 mm Maks. debelina pločevine brez predupogibanja – konstrukcijsko jeklo 2,5 mm Maks. debelina pločevine s predupogibanjem – konstrukcijsko jeklo 2 mm Premer zgornjega valja 90 mm Hitrost valjanja 4,5 m/min Moč motorja 2,2 kW Dolžina 2250 mm Širina 1000 mm Višina 1500 mm Teža 900 kg ZA OKROGLE IN ELLIPTIČNE DELE V SERIJSKI PROIZVODNJI (ČAS CIKLA MOŽEN TUDI DO 20 S) 4 valji NC krmiljenje z zaslonom na dotik Pogonski zgornji valj s hidromotorjem in planetnim prenosom Hidravlične preklopne ležaje Mobilni upravljalni pult Kaljeni valji Navodila za uporabo v NEMŠČINI DODATNA OPREMA: Dovajalna miza cena po dogovoru

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €77,000 Leasing rate: €1,455.30 Pressing force: 70 t Nominal pressing force at 4 mm Table length: 920 mm Table width: 500 mm Through-hole in table: 180 mm Stroke: 12 – 120 mm Strokes per minute: 50 – 80 Ram guides: 8 Ram adjustment: 80 mm Throat depth: 260 mm Clear space between uprights: 560 mm Motor: 7.5 kW Nledpfxsyq Snms Anpeh Length: 1,225 mm Width: 1,865 mm Height: 3,060 mm Weight: 7,000 kg Touch screen operation Semi-automatic stroke change Motorized ram adjustment with mechanical display and decimal resolution Variable-speed motor Hydraulic overload protection Double clamping plate Oil circulation lubrication Dynamic braking Keyence light curtain Automation and control of press parameters via PLC with alarm visualization on operator touch screen. Monitored standard parameters: - Control and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Automatic and manual stroke adjustment - Tool monitoring - Alarm visualization - Hydraulic safety

Stanje: novo, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €143,100 Leasing rate: €2,704.59 Pressing force: 160 t Nominal pressing force at 6 mm Table length: 1,200 mm Table width: 650 mm Die opening in table: 200 mm Stroke: 16–160 mm Strokes per minute: 35–55 Ram size: 740 x 420 mm Number of ram guides: 8 Ram adjustment: 100 mm Throat depth: 330 mm Clear gap between uprights: 690 mm Motor power: 15 kW Length: 1,410 mm Width: 2,220 mm Height: 3,544 mm Weight: 16,000 kg Touch screen operation Semi-automatic stroke change Motorized ram adjustment with mechanical display and decimal resolution Variable speed motor Hydraulic overload protection Automatic cam switching at top dead center Double clamping plate Nledpsyq Suysfx Anpoh Oil circulation lubrication Dynamic braking Keyence light barrier Automation and control of press parameters via PLC, with alarm visualization on OP touch screen. Monitored standard parameters: - Control and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Automatic and manual stroke adjustment - Tool monitoring - Alarm visualization - Hydraulic safety

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €75,000 Leasing rate: €1,417.5 Pressing force: 150 tons Stroke: 500 mm Table size: 2,500 x 2,050 mm Installation height: 800 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Length: 2,900 mm Width: 2,500 mm Nlsdpoynmp Tjfx Anpoh Height: 2,500 mm Weight: 5,200 kg Cylinder: fixed or horizontally movable Clear frame width: 2,050 mm Horizontally movable cylinder: 1,400 mm Hydraulically movable frame: 1,600 mm Horizontally movable cylinder Hydraulically movable frame Operation via manual lever as well as control panel Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: - Work table welded to the base frame, with holes on the surface - Control panel on a swing arm (pushbuttons for press movement, solenoid valves, Siemens CPU) - Wireless control unit (pushbuttons for press movement, solenoid valves, Siemens CPU) - Siemens control system with touchscreen - Lifting cylinders integrated in the table (6, 8 or 10 pcs.) - Anti-rotation device for the ram - 2 speeds for frame and cylinder movement - Oil cooler and decompression valve

Stanje: novo, Stanje novo Rok isporuke cca 12 nedelja od narudžbe Zemlja porekla Turska Cena 18.200 € Leasing rata 349,44 € Pritisna snaga 100 t Cilindar fiksni ili pomični: fiksni Dužina savijanja 1.500 mm Hod 300 mm Razmak između stubova 1.520 mm Razmak između stola i držača alata 680 mm Brzi hod 10 mm/s Radna brzina 5 mm/s Maks. kapacitet savijanja (konstrukcioni čelik) 6 mm Sto 500x1.520 mm Otvor u stolu 100 mm Razmak rupa 190 mm Dužina 2.630 mm Širina 1.000 mm Visina 2.275 mm Težina 2.500 kg 2 vodilice Velika ploča klipa i veliki sto sa T-žljebovima Gornji i donji alat za savijanje Manometar Brzo podešavanje sa automatskim prebacivanjem na radnu brzinu Nodsynmtrjpfx Anpslh Slobodan zaustavak klipa u bilo kojoj poziciji Dvoručno upravljanje Visina stola podesiva Oprema u skladu sa CE direktivama Uputstvo za rad na nemačkom i engleskom jeziku

Stanje: novo, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Italy Price: €258,000 Pressing force: 400 tons Stroke: 500 mm Table: 5,000 x 3,050 mm Installation height: 700 mm Rapid traverse: 20 mm/s Working speed: 2 mm/s Length: 4,500 mm Width: 5,000 mm Height: 2,600 mm Weight: 24,000 kg Cylinder: fixed or horizontally movable Clear column width: 3,050 mm Njdpfjynmuvjx Anpolh Horizontally movable cylinder: 2,200 mm Hydraulically movable frame: 3,600 mm Horizontally movable cylinder Hydraulically movable frame Operation via hand lever as well as control panel Equipment according to CE regulations; operating manual in GERMAN and ENGLISH OPTIONS: - Work table welded to the base frame, with surface drillings - Control panel on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) - Wireless control panel (push buttons for press movement, solenoid valves, Siemens CPU) - Siemens control unit with touchscreen - Lifting cylinders integrated into the table (6, 8, or 10 units) - Anti-twist device for the piston - 2 speeds for frame and cylinder movement - Oil cooler and decompression valve

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €80,000 Leasing rate: €1,512 Pressing force: 200 tons Stroke: 500 mm Njdeynmv Hjpfx Anpslh Table: 2,000 x 1,550 mm Installation height: 800 mm Rapid traverse: 20 mm/s Working speed: 2 mm/s Length: 2,400 mm Width: 2,000 mm Height: 2,600 mm Weight: 4,800 kg Cylinder: fixed or horizontally movable Clear stand width: 1,550 mm Horizontally movable cylinder: 1,000 mm Hydraulically movable frame: 1,300 mm Horizontally movable cylinder Hydraulically movable frame Operation via hand lever and control panel Equipment conforms to CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: - Worktable welded to the base frame with surface borings - Control console on swivel arm (buttons for press movement, solenoid valves, Siemens CPU) - Wireless control console (buttons for press movement, solenoid valves, Siemens CPU) - Siemens controller with touchscreen - Lifting cylinders in the table (6, 8 or 10 pcs.) - Anti-rotation device for piston - 2 speeds for frame and cylinder movement - Oil cooler and decompression valve

Stanje: novo, Stanje novo Rok isporuke oko 4 mjeseca od narudžbe Zemlja porijekla Italija Cijena 89.700 € Leasing rata 1.695,33 € Pritisna snaga 85 t Hod 500 mm Klinasta glava 700x400 mm Stol 800x600 mm Ugradbena visina 600 mm Izbacivač 300 mm Brzina brzog hoda 105 mm/s Smanjena brzina 41 mm/s Radna brzina 7 mm/s Brzina povratka 58 mm/s Motor 7,5 kW Dužina 1200 mm Širina 1600 mm Visina 2500 mm 4 vođenja klina T-utori na stolu Rexroth hidraulična jedinica Nadzirani elektromagnetni ventili Izmjenjivač topline zrak/ulje Tlačni prekidač Dvo-ručna upravljačka konzola Podešavanje hoda pomoću krajnjih prekidača Siemens CPU Bočne fiksne zaštitne rešetke Opremljeno prema CE propisima (IV kućište) OPCIJE (cijene na upit): Jastuk za izvlačenje Prizma vođenje Nedpfxsynmxzo Anpslh Svjetlosna zavjesa CNC Siemens upravljanje s ekranom na dodir Hidraulična pumpa s promjenjivom brzinom Proporcionalni ventili Bočne pomične zaštitne rešetke s krajnjim prekidačem

Stanje: novo, Novo stanje Vrijeme isporuke cca. 4 mjeseca od narudžbe Zemlja porijekla Italija Cijena 138.000 € Leasing rata 2.608,2 € Pritisna sila 170 t Hod 500 mm Klizač 870x500 mm Stol 1000x600 mm Ugradbena visina 600 mm Izbacivanje 300 mm Brzi hod 110 mm/s Smanjena brzina 42 mm/s Radna brzina 7 mm/s Brzina povratka 70 mm/s Motor 19 kW Dužina 1500 mm Širina 1950 mm Visina 2650 mm 4 vodilice klizača T-utor na stolu Rexroth hidraulična jedinica Nadzirani elektromagnetni ventili Izmjenjivač topline zrak/ulje Tlačni sklopni prekidač Dvo-ručna upravljačka konzola Podešavanje hoda krajnjim prekidačem Siemens CPU Nedpfx Ajynmx Ujnpolh Bočne fiksne zaštitne rešetke Oprema prema CE direktivi (IV ograda) OPCIJE (cijene na upit): Izvlačni jastuk Prizmatične vodilice Svjetlosna barijera CNC Siemens upravljanje s ekranom na dodir Hidraulična pumpa s promjenjivom brzinom Proporcionalni ventili Bočne pomične zaštitne rešetke s krajnjim prekidačem

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Nlsdpfx Anjynmzpopjh Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Nledpfeynm Ehsx Anpeh Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Nsdpfsynm Ensx Anpjlh Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended