Bucher Hydraulics Strukturni Dvižni Sistem, Hidravlično Dvigalo nakup rabljenega (24.248)

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, 12 pasaž i valjčni mlin buhler-miag Isdpfxjyyqwmo Al Nsia Celotna čistilnica Delovanje 1t/h pšenice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, FREQUENCY CONVERTER KWA 60 – VOLTAGE 380/660 – 50/100 HZ – RPM 1450 – 6000 IN GOOD CONDITION Frequency Inverter, Frequency Converter, Drive Inverter, Controller, Variable Speed Drive Iiodpfx Aowcqxcjl Nsa - Input: 380 V 50 Hz - Output: 380 V 100 Hz - Power: 60 kVA

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h for the compaction and formation of bales of soft waste materials, such as glass wool mats or similar. The MG 50 T.E. model features a fully enclosed compaction chamber; both the material loading door and bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and comes with a 10 m extension cable, allowing it to be positioned away from the baler. The press plate is operated by a single cylinder with a 2700 mm stroke and is guided by 4 lateral sliding rails. Material is loaded from the front. The compaction cycle (downward and upward movement of the press) is automatic, operated by push button. - For transport, the machine is constructed in three sections: one of 2000 mm height, one around 2300 mm, and the cylinder, which will be assembled onsite. - Bale tying is preset-type, performed with the doors open, and is done manually; tying can be done with standard pre-cut wire or strapping through slots at the rear of the chamber. - Bale extraction is carried out using a forklift; dedicated channels at the base allow the forklift tines to be inserted. - The bale extraction door is closed via a handwheel, ensuring safe opening even with highly elastic materials; a microswitch ensures the door is securely closed before pressing. The upper door is equipped with a hydraulic lever closure with controls on the machine. - Can be installed against a wall; requires front access only for material loading and bale extraction. - The hydraulic circuit features a safety lock valve to prevent press plate descent. - The machine must be fixed to the ground and is positioned over a wash liquid collection tray. • Manufacturer / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Material pressing pressure: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material Iisdpfx Aleyzr Nmj Noa • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm • Ram stroke: 2700 mm, single extension • Operation: Automatic, push button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Removed with forklift • Hydraulic unit: Integrated in press • Motor power: 10 Hp (7.5 kW) • Supply voltage: 380V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used vertical hydraulic baler, in excellent condition, sold as seen and approved.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, Oprema: dokumentacija / priročnik, Prodajamo skoraj nerabljen Keyence IM-8020, kupljen februarja 2025, skupaj z IM Editorjem (IM-H3EE) in USB ključkom za CAD uvoz (IM-H3C). To vam omogoča, da pripravljate merilne programe iz CAD modelov na zunanjem računalniku in jih nato uvozite v napravo Keyence. Ta model vključuje tudi svetlobno sondo. Iedpfx Aleyym Dpj Noia Stroj je v brezhibnem stanju, popolnoma funkcionalen in zelo malo rabljen.

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units 1 pc. Spindle diameter 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: 12,500 euros 2) Okoma SF3F shaper with glazing bead saw. Price: 4,000 euros 3) Oertli tooling set for Haberkorn and Okoma machines. Price: 7,500 euros Wooden window 1 set IV 68/78/88 and 1 set wood-aluminium window IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: 7,000 euros (Hardware can be changed for a surcharge upon request!) ----- Technical manufacturer’s description: - Haberkorn FZS1 slotting machine with automatic feed, - Infinitely variable height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal pneumatically powered positioning, manually adjustable - Safety and extraction hood with extraction port diameter: 100 mm Slot spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via precision ball screw spindles - Safety and extraction hood with extraction port diameter: 180 mm Iisdjxa Hi Nopfx Al Nsa - Automatic brake with speed monitoring Tilting table: - Swivel range: +/- 65 degrees - Automatically changing counter block (programmable) - Pneumatic clamp - Highly-accurate electronic angle display - Automatic longitudinal compensation - Counter block always in the cutting plane for any angle setting Special features: - Laser for workpiece positioning - Saw positioning pneumatically operated - Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F spindle moulder with vertical spindle, 3 tools - Extraction connection stubs: 2 x 120 mm - Spindle length: 270 mm - Opposing fence with fine adjustment and turret head - Triple stroke, max. lift height 90 mm - Glazing bead cut-off saw with safety and extraction hood, 80 mm diameter - 8-roller power feed with pedestal and hold-down arm, required for glazing bead cut-off saw setup - Pneumatically actuated edge gear inserter, 6000 rpm - 2x 3kW motor - Arbor diameter 30 mm ----- 3) Oertli tooling for Haberkorn and Okoma machines - 1 set wooden window tools IV 68/78/88 - 1 set wood-aluminium window tools IV 68/78 Sale of tools in condition, scope, and with accessories as available in our warehouse. Note regarding window sections, tool drawings, tool system lists: Firma Engelfried does not provide any warranty that the tools actually available conform to the systems specified or depicted. ----- 4) Götzinger OBM Plus corner hinge and olive drilling machine - Corner and scissor stay + handle olive drilling - Vertical drilling unit with: - Quick-change drilling head system - Pneumatic feed via foot valve - 1x olive drilling head 24 mm - 1x corner hinge double head - Maco MultiMatic hardware - 1x adjustable flip stop left with 6 stops - 1x adjustable flip stop right with 6 stops - 1x complete machine stand with tray - 220/400 V, 60 Hz, 1.3 kW - 1x roller conveyor approx. 1 m long with 2 rollers - 1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the ...

Stanje: rabljeno, Leto izdelave: 1988, Max. pressing force: 1,600 kN Main drive: 30 kW Speeds: Rapid down I: 290 mm/sec Rapid down II: 130 mm/sec Working down I: 39 mm/sec Working down II: 17 mm/sec Rapid up I: 290 mm/sec Rapid up II: 130 mm/sec Alternatively, a freely adjustable drive: Drive power: 37 kW Isdpfxeyxqt So Al Nsia Rapid down, freely adjustable: 360 mm/sec Working down, freely adjustable: 23–48 mm/sec Rapid up, freely adjustable: 360 mm/sec Ram stroke, max.: 150 mm Installation height, max.: 450 mm Ram surface: 700 × 700 mm Table surface: 700 × 700 mm Table through-hole Ø: 180 / 150 mm Clearance between uprights (front): 750 mm Clearance between uprights (side): 250 mm Table height above floor: 850 mm Ram bore Ø H7: 60 mm T-slots in table and ram H12 (DIN 650): 22 mm T-slot arrangement: to be defined Machine footprint, approx.: 1,500 × 1,700 mm Machine height, approx.: 3,150 mm Machine weight, approx.: 14,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, 3D merilni makroskop Krmilnik VR 3000K Merilna glava VR 3100 Merilno območje 24 x 18 x 10 mm Merilna diagonala 30 mm Povečava 12x – 160x Iisdpfxjy Aynts Al Nea Ločljivost 0,1 µm Samodejno zaznavanje robov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Senzor slike 1", 6,6 megapikslov, CMOS Dvojna telecentrična leča Z-os premik 30 mm Iijdpfx Aey Aym Asl Noa Maksimalna obremenitev Z-mize 3 kg

Stanje: rabljeno, Sistem stisnjenega zraka s kompresorjem za stisnjen zrak, hladilnim sušilcem, filtrom z aktivnim ogljem in dvema rezervoarjema za stisnjen zrak. Iiedpfjyzhz Ssx Al Noa Stroj (dodatno): Leto izdelave: 2006 - 2019 Kapaciteta: 202 m3/h Obratovalni tlak: 10 bar Oprema: kompresor za stisnjen zrak; hladilni sušilec; filter z aktivnim ogljem; 2 x rezervoar za stisnjen zrak.

Stanje: rabljeno, Leto izdelave: 2012, Schuko Tip Octopus 20 Premer priključka: 200 mm Potreben volumenski pretok: 3.000 m³/h Potreben podtlak: 1.100 Pa Dolžina mize: 3.280 mm Iisdpfxjy Agqhs Al Nsa Širina mize: 1.000 mm Nastavljiva višina mize: 700-1.000 mm Maksimalna raven zvočnega tlaka: 63 dB(A) Teža: 200 kg Leto izdelave: 2012

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Hainbuch centroteX Quick Change System (Year 2019) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Draw tube connection: M85x2 o Length: 53 mm o Bore: 78 mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o Item no.: 10000678 o Length: 136 mm • 1x TOPlus mini Axzug size 65 (A038530.008C) o Item no.: 10000676 o Length: 134.5 mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179 mm Iiedpfx Aov Ivakjl Noa o Diameter: 210 mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155 mm o Diameter: 257 mm • 1x monteq quick change system (A012708.0009B) • 1x Roll container D400 o Storage for the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Operating instructions/manuals • 1x toolbox with accessories Accessories: • Clamping head TOP65 (serrated, for raw material): o 1 pc. each → d12, 20, 30, 36, 40, 50, 55, 60, 65 mm • Clamping head TOP65 (hexagon): o 1 pc. each → SW36, 45, 46, 50 • Clamping head TOP65G (smooth): o 1 pc. each → d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 mm o 2 pcs. → d38 mm • 1x extraction ring for clamping head 65 • Total of 50 clamping heads • Accessories for jaws: o for HWR 4-jaw chuck:  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck:  1 set of hard reversible jaws o Various T-nuts and bolts o Various distance studs for jaws (to adjust clamping length for material) • Various soft jaws (2 pallets)

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21000835, skupna masa: 1.500 kg, vhodna napetost: 400 V, skupna širina: 1.000 mm, skupna dolžina: 2.000 mm, skupna višina: 2.000 mm, volumenski pretok: 4.500 m³/h, moč: 4 kW (5,44 KM), vhodna frekvenca: 50 Hz, vhodni tok: 9 A, Sesalna naprava ESTA MOBEX-P 36 Isdpfoy Dcx Rox Al Nsia Pozor: artikel je treba obvezno prevzeti med 07. in 09.07.2026 na še dogovorjen datum. FCA D-71263 Weil der Stadt – naloženo na tovornjak

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16001522, skupna masa: 1.500 kg, vhodna napetost: 400 V, skupna širina: 1.000 mm, skupna dolžina: 2.000 mm, skupna višina: 2.000 mm, volumenski pretok: 4.500 m³/h, moč: 4 kW (5,44 KM), vhodna frekvenca: 50 Hz, vhodni tok: 9 A, ESTA MOBEX P-36 odsesovalna naprava Iisdpfx Alsy Dcxke Nea Pozor: artikel je treba obvezno prevzeti med 07. in 09.07.2026, točen datum bo še dogovorjen. FCA D-71263 Weil der Stadt – naloženo na tovornjak

Stanje: rabljeno, Leto izdelave: 1992, Stanje rabljeno Leto izdelave 1992 Številka zaloge 090174 Dobavni rok marec 2026, vmesna prodaja Država izvora Belgija Cena 17.800 € Na zalogi 1 Rezna dolžina 3050 mm Maks. debelina pločevine - konstrukcijsko jeklo 6 mm Število hodov 11 - 25 1/min Rezni kot 0,5 - 3° Število pritisnih držal 18 Zadnji prislon 750 mm Moč motorja 11 kW Dolžina 3850 mm Širina 1750 mm Višina 1720 mm Teža 4600 kg Delovna višina 770 mm Krmiljenje SC 5 za: - vnos debeline pločevine - samodejna nastavitev rezniko kota in reže - omejevanje rezne dolžine - programabilna dolžina zadnjega prislona Motoriziran zadnji prislon 750 mm Zaščita pritisnih držal Iedpfoyi Hppsx Al Nsia Nožni pedal Namizni podstavki z kroglami 1 stranski prislon 1000 mm Navodila za uporabo v nemščini Stroj ne ustreza nemškim UVV in avstrijskim AMVO NOVA rezila

Stanje: rabljeno, Leto izdelave: 1993, Gilotinske škarje Proizvajalec: LVD Tip: MVSB 62/8 Leto izdelave: 1993 Maks. dolžina reza: 6.200 mm Debelina pločevine: 8 mm Isdsy Atn Hopfx Al Noia Teža ca.: 13.000 kg ä16426

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, Tlačna sila: 225 t Dolžina krivljenja: 4050 mm Krmiljenje: DA 69 TW Vsebnost olja: 400 l Iodpjyz S Ngofx Al Nsia Skupna potrebna moč: 17 kW Teža stroja cca: 18.100 kg Dimenzije: 5700 x 2610 x 3300 mm

Stanje: rabljeno, Leto izdelave: 2021, vhodna napetost: 400 V, vhodni tok: 9 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna masa: 3.500 kg, Ponujamo rabljeni Tantec PLX XYZ sistem za predobdelavo površin pred tiskom, letnik 2021. Tip: PLX XYZ Letnik: 2021 Serijska številka: 41805 Krmilna napetost: 24 VDC Napetost: 400/230 V 3f+N+PE Iodpey Am D Isfx Al Noia Tok: 9,5 A Frekvenca: 50 Hz Moč: 6,5 kW Teža: 3500 kg Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas kontaktirajte po telefonu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pritisk: 25 t Dolžina krivljenja: 1250 mm Razmak med stojali: 1200 mm Krmljenje: Cybelec CybTouch 12 Hod: 150 mm Vgradna višina: 340 mm Hitrost hitrega spusta: 220 mm/s Hitrost krivljenja: 0-12 mm/s Skupna potrebna moč: 5,5 kW Teža stroja cca: 2.500 kg Mere: 1980 x 1170 x 2185 mm Standardna oprema: Osnovna oprema: - CNC krmilnik Cybelec CybTouch 12 - 4 osi: Y1-Y2-X-R - Zadnji prislonski sistem mod. GHP-2 - Glavni motor s servopogonom - Varnostni sistem: DSP AP+MCS - Hidravlični sistem HAWE Iiedeyz Sw Rspfx Al Noa - CE standard

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Pritisk: 36 t Dolžina upogibanja: 1020 mm Prehod med stojali: 932 mm Grlo: 150 mm Hod: 120 mm Uporabna vgradna višina: 295 mm Delovna hitrost osi Y: 10/25 mm/s Isdpfx Aeyz Rwiel Njia Hitri pomik osi Y: 220 mm/s Delovna višina: 1150 mm Teža stroja cca: 2.600 kg Potrebni prostor cca: 1805x1330x2380 mm Obratovalne ure: 3.297 h

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širina pločevine: 2500 mm Debelina pločevine: 4 mm Teža stroja cca: 5.000 kg Potreben prostor cca: 3000 x 2000 x 1700 mm Ijdpfx Asyz Rv Ejl Noia Dodatna oprema: - Naprava za dvig pločevine - Kotni prislon - 3x podporni nosilci - Nožno stikalo - Svetlobna zavesa

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 436 h, dvižna višina: 6.100 mm, vrsta goriva: električni, Drivetrain Drive: Wheel Weights Unladen weight: 1,922 kg Functional Lift capacity: 590 kg Working height: 810 cm CE marking: yes Condition Technical condition: good Visual condition: good Further information Transport dimensions (L x W x H): 2.31 m / 1.17 m / 2.13 m Platform type: Deck Additional information Please contact Tobias Mayr for more details. SkyJack 8.10m Electric Scissor Lift Regularly serviced and inspected machine, 1st owner from rental company Skyjack scissor lifts have stood for solid and robust construction for many years. Their compact dimensions enable access to confined work sites. Particularly noteworthy is the high load capacity of the SJ 4620 at 590 kg and its wide platform. Manufacturer: SkyJack Model: SJ4620 Year of manufacture: 2011 Recorded operating hours: 436 hours Batteries from 2021 Net weight: approx. 1,922 kg Working height: approx. 8.10 m Platform height: 6.10 m Iiedpfx Aoy Dzpzsl Nsa Load capacity: 590 kg Built-in charger Non-marking tires Transport dimensions (L/W/H): 2.31 m / 1.17 m / 2.13 m – guardrails fold down, height then 1.79 m UVV safety inspection valid until 11/2026 Miscellaneous: Affordable delivery possible throughout Europe. Viewings by appointment only. We are happy to accept your equipment / construction machinery as trade-in. We can offer you customized financing or leasing options (business customers only). If you have any questions, please contact us. All prices ex location 86684 Holzheim, Germany. All information subject to change. Errors in description and transmission, as well as prior sale, reserved. All information regarding color, features, condition, properties etc. of the offered vehicles is non-binding. Subject to typing errors/mistakes/prior sale.

Stanje: dober (rabljeno), Leto izdelave: 2023, dvižna višina: 4.900 mm, vrsta goriva: električni, Drivetrain Drive: Wheel Weights Unladen weight: 750 kg Functionality Lifting capacity: 230 kg Working height: 690 cm CE certification: yes Condition Technical condition: good Optical condition: good Additional information Transport dimensions (L x W x H): 1.49 m / 0.78 m / 1.99 m Platform type: Flat Further information Please contact Tobias Mayr for more details. Iteco 6.90m Electric Scissor Lift Platform Regularly serviced and inspected aerial work platform from a rental company in very good condition The Iteco IM 5080 UL electric scissor lift achieves a working height of 6.9 m indoors and 4.45 m outdoors. It is equipped with non-marking tyres and is emission-free. The working platform can be extended to a length of up to 2 m. Manufacturer: Iteco IMER Model: IM 5080 UL Year of manufacture: 2023 Net weight: approx. 750 kg Working height: approx. 6.90 m Platform height: 4.90 m Load capacity: 230 kg Iijdpfx Alsy Dzpns Nea Platform extendable to up to 200 cm in length Built-in charger Transport dimensions (L/W/H): 1.49 m / 0.78 m / 1.99 m On request, a new safety inspection (UVV) will be carried out. Other information: Affordable delivery available across Europe. Viewing is only possible by appointment. We are happy to accept your equipment/construction machinery as trade-in. We would be pleased to offer you a financing or leasing proposal tailored to your needs (for commercial customers only). If you have any questions, please contact us. All prices are ex location 86684 Holzheim. All information subject to change. Errors in transmission, printing, and prior sale reserved. All information regarding colour, equipment, condition, characteristics, etc. of the listed vehicles is without guarantee. Subject to typing errors, mistakes, and prior sale.

Stanje: dober (rabljeno), Leto izdelave: 2023, dvižna višina: 4.900 mm, vrsta goriva: električni, Drivetrain Drive: Wheel Weights Unladen weight: 750 kg Functionality Lifting capacity: 230 kg Working height: 690 cm CE certification: yes Condition Technical condition: good Optical condition: good Additional information Transport dimensions (L x W x H): 1.49 m / 0.78 m / 1.99 m Platform type: Flat Further information Please contact Tobias Mayr for more details. Iteco 6.90m Electric Scissor Lift Platform Iisdpfx Alsy Dzpbj Nsa Regularly serviced and inspected aerial work platform from a rental company in very good condition The Iteco IM 5080 UL electric scissor lift achieves a working height of 6.9 m indoors and 4.45 m outdoors. It is equipped with non-marking tyres and is emission-free. The working platform can be extended to a length of up to 2 m. Manufacturer: Iteco IMER Model: IM 5080 UL Year of manufacture: 2023 Net weight: approx. 750 kg Working height: approx. 6.90 m Platform height: 4.90 m Load capacity: 230 kg Platform extendable to up to 200 cm in length Built-in charger Transport dimensions (L/W/H): 1.49 m / 0.78 m / 1.99 m On request, a new safety inspection (UVV) will be carried out. Other information: Affordable delivery available across Europe. Viewing is only possible by appointment. We are happy to accept your equipment/construction machinery as trade-in. We would be pleased to offer you a financing or leasing proposal tailored to your needs (for commercial customers only). If you have any questions, please contact us. All prices are ex location 86684 Holzheim. All information subject to change. Errors in transmission, printing, and prior sale reserved. All information regarding colour, equipment, condition, characteristics, etc. of the listed vehicles is without guarantee. Subject to typing errors, mistakes, and prior sale.

Stanje: rabljeno, Leto izdelave: 2008, Kotlovnica na lesne sekance z ogrevalno močjo 100 kW Polžasti transporter spredaj levo Zaboj za pepel na desni z izpraznjevanjem za prostor premera 6 m že demontirano Iodpfx Asyalbljl Neia prosto zaradi priklopa na daljinsko ogrevanje vključeno nakladanje na tovornjak

Stanje: rabljeno, Širina pločevine: 2500 mm Debelina pločevine: 4 mm Teža stroja: ca. 5.000 kg Prostorske zahteve ca.: 3000 x 2000 x 1700 mm Iiedpfxoyz Ddpe Al Noa Dodatna oprema/Oprema: - Naprava za dvig pločevine - Kotna prislonska letev - 3 podporne roke - Nožna stopalka - Svetlobna zavesa