Bramidan 4-X25 nakup rabljenega (59.828)

Stanje: dober (rabljeno), prevoženi kilometri: 288.900 km, moč: 360 kW (489,46 KM), prva registracija: 01/2023, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, skupna dolžina: 5.990 mm, skupna širina: 2.530 mm, skupna višina: 3.960 mm, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, Leto izdelave: 2023, Oprema: ABS, AdBlue, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, hladilnik, klimatska naprava, meglenke, nadzor oprijema, parkirni grelec, spojler, tempomat, zapora diferenciala, = Dodatne možnosti in oprema = - Adaptivni tempomat - Strešni spojler - Diferencialna zapora - Euro 6 - Po višini nastavljiv volan - Klimatska naprava - Usnjen volan - Zračno vzmetenje - Radio z MP3 podporo - Spalna kabina - Sončna zaslonka - Pomožno (stacionarno) ogrevanje - Priključna gred (PTO) = Dodatne informacije = Splošne informacije Število vrat: 2 Registrska oznaka: 59-BTP-8 Tehnične informacije Število valjev: 6 Delovna prostornina motorja: 12.777 ccm Največja obremenitev sprednje osi: 8.000 kg Največja obremenitev zadnje osi: 11.500 kg Teže Lastna teža: 8.355 kg Nosilnost: 12.645 kg Največja dovoljena masa: 21.000 kg Notranjost Število sedežev: 2 Vzdrževanje, zgodovina in stanje Tehnični pregled: veljaven do 03.2027 Lhodpeyh I Arefx Aamji Tehnično stanje: dobro Vizualno stanje: dobro

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, 1. Weishaupt plinski gorilnik WM-G10 / 4-A. Z plinsko progo Dungs DN 50. Izvedba: ZM Leto izdelave: 2011 Moč: 110 - 1250 kW. Priključni tlak: 15-500 mbar. 2. Weishaupt plinski gorilnik WM-G10 / 4-A. Z plinsko progo Dungs DN 50. Izvedba: ZM Leto izdelave: 2005 Moč: 120 - 1250 kW. Lhedpfx Aaszaa Uajmei Priključni tlak: 15-500 mbar.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Format 4 Kappa 450 x-Motion Lodpoy Rp D Tefx Aamehi 2-osno upravljanje, višina in nagib Tehnični podatki: - Dolžina reza: 2800 mm - Širina reza: 1300 mm - Višina reza: 155 mm - Maks. premer žaginega lista: 450 mm - X-motion upravljanje - Kotna lestvica z dolžinsko kompenzacijo - Možnost odsesavanja Ø 120 mm - Moč motorja: 10 kW - Leto izdelave: 2025 Duplex kotni prislon

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm Lsdpfx Aajwg R I Eomohi • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: Lhedpfx Aeyzulweamsi 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), Naprodaj električni motor podjetja Kaltenbach Maschinenfabrik Cena velja za 1 kos Stanje: uporabljen, delujoč Motor preverjen s testerjem Ljdpfx Aaoyv Uvxjmehi Vidne običajne sledi uporabe in skladiščenja Tehnični podatki: Proizvajalec: Kaltenbach Maschinenfabrik Tip: DKV 112M 238 4 Trifazni motor Moč: 1,7 / 2,6 kW Napetost: 400 V, 50 Hz Zaščita: IP54 Izolacijski razred: F Število vrtljajev: 700 / 1415 obr/min Dahlander večhitrostni motor Premer gredi približno 28 mm

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, delujoče Proizvajalec: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Opis stroja: Na prodaj profesionalni lepilni agregat HOT-MELT BÜHNEN / MELER 6050, namenjen industrijskemu nanašanju lepila. Visokokakovostna naprava – evropska proizvodnja, uporablja se v: pakiranju pohištveni industriji lesnopredelovalni industriji proizvodnih linijah ⚙️ Tehnični podatki (iz tablice): Napajanje: 230V / 50-60 Hz 400V (3-fazno) Moč: do 4,7 kW Maks. temperatura: 200°C Maks. tlak: do 160 bar Izhodi: 2 Model: HB 6050-2 NI120 📦 Komplet vključuje: ✔️ Lepilni agregat BÜHNEN / MELER Ljdpfsy Aam Nox Aamjhi ✔️ 4 grelne cevi (celoten komplet!) ✔️ Kable in priključke, vidne na fotografijah 🔍 Stanje: predmet rabljen normalni znaki uporabe v dobrem tehničnem stanju notranjost rezervoarja vidna na slikah prodaja se natančno kot na fotografijah

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi Lhodpfx Aajy Aagiemei 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah

Stanje: rabljeno, prevoženi kilometri: 862.473 km, moč: 324 kW (440,52 KM), prva registracija: 06/2009, velikost pnevmatike: 385/65R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.510 mm, zavore: intarder, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 4, vzmetenje: zrak, Leto izdelave: 2009, Oprema: električno upravljanje oken, klimatska naprava, spojka prikolice, spojler, žerjav, Tehnične informacije Število valjev: 6 Prostornina motorja: 10.518 ccm Pogonski sklop Pogon: Kolesa Tip motorja: MAN D2066 LF57 Menjalnik Menjalnik: ZF 12AS 2131 DD, 12 prestav, samodejni Konfiguracija osi Vzmetenje: Zračno vzmetenje Velikost pnevmatik spredaj: 385/65R22.5 Zadnja os 1: Velikost pnevmatik: 315/80R22.5; dvojna montaža Zadnja os 2: Velikost pnevmatik: 315/80R22.5 Teže Lastna teža: 14.010 kg Nosilnost: 11.990 kg Skupna dovoljena masa: 26.000 kg Funkcionalno Jarbol: teleskopski (2 deli) Znamka nadgradnje: HIAB 122 PRO Lhjdjuc A R Tepfx Aamji = Druge možnosti in dodatki = - Strešni spojler - Kiper hidravlika - Hladilnik - PTO

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131 CNC Machining Centre FORMAT-4 profit H10 22.43 Used, year of manufacture 2017 Operating hours approx. 1800 h Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300 CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data: Phenolic resin matrix table system Grid table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control console Handheld terminal for remote axis control Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24,000 rpm Central extraction via combined connections (D=250mm) Software: Woodflash German (H20/H08/H10/H50) Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Feeding Unit FORMAT-4 L-Motion Technical Data: Year of manufacture 2017 2-axis version with 4 storage positions for loading an H10 with lifting table CNC loading Ledpfx Ajrrh T Aoamjhi Gentle transport Fully automatic panel handling Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3 Stack height 1800 mm Extraction System FELDER RL 300 Technical Data: Year of manufacture 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar at 40 NL/min Operating pressure in the unit 6 bar Chip container volume 500 l Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation Errors in description and price reserved Dismantling and loading by us is available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as seen Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Zelo lepo ohranjen Bramidan prevrnilnik za visoko praznjenje. Lhodpfx Aszhnpyjamsi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (z dovodom za plin) - Moč: 100-1100 kW - Izvedba: ZM-LN - Leto izdelave: 2020 2. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2015 (1 kos), 2013 (na voljo 2 kosa) 3. WEISHAUPT WM-G10/2-A - Izvedba: ZM-LN - Moč: 75-630 kW - Leto izdelave: 2021 4. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 125-900 kW Lhjdpowgyrtsfx Aamoi - Izvedba: ZM-LN - Leto izdelave: 2011 5. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2011 6. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2009

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2008, lastna masa: 310 kg, barva: rdeča, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2008, nosilnost: 3.000 kg, Oprema: žerjav, Lokacija vozila: Bovenden, popolnoma opremljeno z Kinshofer vrtljivo glavo in zgornjim obešanjem! Širina čeljusti cca 500 mm, prostornina cca 250 l! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane! Lsdpfsyk H Rpox Aamjhi

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2013, lastna masa: 320 kg, barva: rdeča, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2013, nosilnost: 3.000 kg, Oprema: žerjav, Lokacija vozila: Bovenden, odprtina približno 1390 mm! Popolnoma vključno z Kinshofer vrtljivo glavo in zgornjim obešanjem! PODATKI O DODATNI OPREMI BREZ JAMSTVA, spremembe, vmesna prodaja in napake so pridržane! Lhjdpfsyaaiksx Aamji

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2007, lastna masa: 305 kg, barva: rdeča, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2007, nosilnost: 3.000 kg, Oprema: žerjav, Lokacija vozila: Bovenden, Širina žlice pribl. 500 mm, prostornina pribl. 250 l, širina odpiranja pribl. 1390 mm! Komplet z Kinshofer vrtljivo glavo in zgornjim obešanjem! PODATKI O DODATNI OPREMI BREZ JAMSTVA, PRIDRŽUJEJO SE SPREMEMBE, PREDPRODAJA IN NAPAKE! Lhedpfsxcyv Iox Aamsi

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2018, lastna masa: 300 kg, barva: rdeča, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2018, nosilnost: 3.000 kg, Oprema: žerjav, Lokacija vozila: Bovenden, širina žlice: 500 mm, razpon odpiranja: 1390 mm, prostornina: 250 l. Popolnoma opremljeno z rotacijsko glavo Kinshofer in zgornjim obešanjem! PODATKI O DODATNI OPREMI BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Lodpjyif Rpjfx Aamjhi

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, moč: 10 kW (13,60 KM), vhodna napetost: 400 V, potovalna razdalja osi X: 4.050 mm, pomik osi Y: 2.560 mm, pomik po osi Z: 280 mm, dolžina obdelovanca (maks.): 3.120 mm, širina obdelovanca (maks.): 2.160 mm, višina obdelovanca (maks.): 105 mm, število osi: 4, število mest v zalogovniku orodij: 16, Oprema: CE označba, For sale is a highly equipped CNC machining center: FORMAT-4 profit H10 22.32, year of manufacture 2015. This machine is ideally suited for precise machining of wood, MDF, plastics, and panel materials. The FORMAT-4 H10 impresses with high traverse speeds and a robust design. Notable features include the powerful 10 kW HSK-F63 spindle, a 360° C-axis, and a total of 16 tool positions. Technical Data: * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year: 2015 * Machine type: CNC machining center Working area * X-axis: 3,120 mm * Y-axis: 2,160 mm * Z-axis: 105 mm Traverse paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse speeds Lhsdpfjy Smi Ajx Aamsi * X/Y: 100 m/min * Z: 30 m/min Milling spindle * 10 kW HSK-F63 spindle * Speed range: 1,000 – 24,000 rpm * Right- and left-hand rotation * Ceramic bearings * Air-cooled Tool changer * 2 tool changers with a total of 16 tool positions * HSK-F63 holders * Tool positions on the machine stand and arranged laterally Additional units * C-axis 0–360° Vacuum / Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two stop rows Control / Software * FORMAT-4 H10 control * WoodFlash software * DXF import * 3D graphical display * Parametric programming * Tool database for up to 500 tools * Mobile operating panel * Handheld terminal Additional equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for boring head * Operator tools and documentation available Condition: Machine currently in operation, well maintained. Inspection by appointment possible.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: Lhsdpfx Aefdkb Tjamoi - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. Ljdpfxed Tbbdo Aamshi The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Lhodpfx Aaed Tqaljmsi The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) Lsdofdkb Uepfx Aamshi - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. Lhsdoguk A Hjpfx Aamsi The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) Lodpoguk Dkefx Aamjhi - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Lsdpfx Ajfdkbheamehi - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. Lhedpfsguk Dvjx Aamoi For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.