Valjčni Stroj Za Izsekovanje Pri Visokem Tisku nakup rabljenega (100.635)

Stanje: rabljeno, številka stroja/vozila: Maschinen-Nr.: 89/8085, Roll marking machines are used for marking solid or hollow round components. Technical data: Manufacturer: Borries Markier-Systeme Type: MB76EL Machine No.: 89/8085 Marking stroke: approx. 220mm Clamping area: 220 x 220mm Itodpfx Akelbgu Ioyok Drive power: 1.1kW Features: - Consistently high marking performance can be achieved with minimal force - Marking length and depth can be easily adjusted - Large workpiece clearance - Adaptation to the workpiece diameter and adjustment of the marking depth is easily possible via the height adjustment of the machine table

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication Iedpfx Akegpxc Sjystk - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 5.100 h, Pressing force: 4,000 kN Table area: 3,000 x 1,400 mm (W x D) Clamping area (table): 2,950 x 1,500 mm Clamping area (ram): 2,950 x 1,240 mm Shut height: 600 mm (bottom stroke and adjustment at top) Stroke rate: 5 - 100 spm, infinitely variable Stroke: 20...200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Iedpfx Akspvlf Soystk Execution: - With servo technology, programmable ram speed - Table clamping plates segmented and manually movable - 8-fold slide guide - Motorized oil central lubrication - Automatic ram adjustment - Pneumatic ram weight compensation - Electromechanical stroke adjustment - Siemens + Fanuc control - Siemens Panel PC visualization in mobile console - 8-fold tool locking system - Tool data storage - 2-channel pressing force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal slot for tool centering in the ram - Vibration-damping machine feet - Drop-through opening in table - Hydraulic ball bars in table - Tool change consoles for hanging Equipped with a complete coil feeding line, manufacturer Lorenz Uncoiler Load capacity: 80 kN Strip width: 20 - 820 mm Expansion range: 470 - 520 mm Coil diameter: max. 1,800 mm Straightener Strip width: max. 820 mm Strip thickness: 0.5 – 4.0 mm Straightening cross-section: 1,600 mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feed rolls Speed: 0 - 30 m/min Electronic roll feeder Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross-section: max. 2,400 mm² Number of rolls: 2 pcs, Ø 120 mm

Stanje: dober (rabljeno), Leto izdelave: 1986, obratovalne ure: 10.000 h, Press force: 30 tons (US) approx. 270 kN Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 rpm Isdpfx Ajnl Snokyjtk Fixed stroke: 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Features: * Hydraulic clutch * Roller feed Manufacturer: Sankyo Model: Variax V70 Strip width: max. 100 mm Only approx. 10,000 operating hours

Stanje: dober (rabljeno), Leto izdelave: 1984, Press force: 800 kN Itjdpfsdhzf Iex Akysk Stroke rate: 30 - 200 strokes/min, adjustable via PIV gearbox Adjustable stroke: 20 - 100 mm Die height: 500 mm (largest stroke, slide up) Ram reinforcement: 75 mm Table size: 1,010 x 800 mm Passage opening: 700 x 150 mm Ram surface: 860 x 700 mm Drive power: 22 kW Features: - 2 connecting rods - 8-point slide guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized slide adjustment - Electropneumatic stroke adjustment Supplied with complete coil line, manufacturer ALBA, consisting of: Decoiler Maximum outer diameter: 1,400 mm Equipped with: • Decoiler travel mechanism • Hydraulic loading reel • Hydraulic auxiliary drive • Hydraulic expansion, 480 - 530 mm • Hydraulic traversing device • Hydraulic pressure arm, laterally adjustable via handwheel • Coil edge limit arms Straightening machine Type: Ma Ria 9 Strip width: max. 400 mm Strip thickness: 0.5 - 5.0 mm Number of feed rollers: 2 pcs., Ø 120 mm, upper roller hydraulically liftable Number of straightening rollers: 9 pcs., Ø 60 mm, upper rollers individually hydraulically adjustable, indication via micrometer, all rollers supported Equipped with: • Hydraulic strip threading aid, table with tongue and hold-down roller • Lateral strip guide at entry with asymmetric adjustment • Lateral strip guide at exit • Outlet roller basket • Loop control via sensors • Lateral loop guide Roller feeder Type: Vhy 400 Strip width: max. 400 mm Strip thickness: max. 5.0 mm Height adjustment via hydraulic bottle jack Press or coil line can also be offered separately.

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 740 x 1,060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 9,000 sheets/h Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Isdpfxolyp Emj Akyjtk Equipment: Non-stop feeder Manual non-stop device at the feeder Blanking station Automatic non-stop roll apron Centerline Including platform 1 tool set Machine delivery time: 6-8 months after order

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 570 x 820 mm Min. sheet size: 230 x 280 mm Maximum die-cutting force: 1.8 MN Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 gsm Cardboard: up to 2,000 gsm Corrugated board: up to 3 mm Itodpfxolyqpdj Akyjk Equipment: Sheet feeder Blanking station Automatic non-stop feeder apron Centerline system 1 tool set Delivery time: 6–8 months after order

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 740 x 1060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Iedpfjlyqrcox Akystk Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at feeder Blanking station Automatic non-stop rolling carpet Centerline Including platform 1 tool set Delivery time for the machine: 6–8 months after order

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 6.334 mm, skupna širina: 4.390 mm, skupna višina: 2.465 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, and waste stripping Technical Data: Max. sheet size: 830 x 1,150 mm Min. sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300 t) Speed: 7,000 sheets/h Materials processed: Paper min. 80 g/m² Itedpfx Aot H Nc Sskysk Cardboard up to 2,000 g/m² Corrugated board up to 4 mm Equipment: Automatic non-stop roll-up delivery board Stripping station Centerline Quick-lock frame for upper stripping tool and central stripping board Pneumatic chase and die plate locking APC 1 – automatic die-cutting pressure system APC 2 – platen tilting at platen exit 1x 4 mm cutting plate incl. 10x 1 mm cutting overlays 2x 5 mm cutting plates 2x chase frames without quick lock Including platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.400 mm, skupna dolžina: 7.800 mm, skupna višina: 2.500 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, waste stripping, and blank separation Specifications: Maximum sheet size: 830 x 1,150 mm Minimum sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300t) Speed: 7,000 sheets/hr Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic pile alignment at feeder 10” display at feeder Automatic non-stop delivery roll apron Stripping station Blank separation station Centerline system Automatic separator sheet inserter for stabilising blank stacks Quick-lock frames for upper stripping tool and central stripping board Itjdpfxjt H Nhhe Akyek Quick-lock frames for upper and lower blanking tools Pneumatic chase clamps and die plate locking APC 1 – automatic cutting pressure control system APC 2 – platen tilting at the delivery end 1x 4 mm cutting plate incl. 10x 1 mm cutting plates 2x 5 mm cutting plates 1x quick-lock chase 2x chases without quick-lock QTM fine adjustment for cutting plates Sheet monitoring at each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Leto izdelave: 1963, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 512804, 1963 Bobst SP900E met dubbelwerkende stripper in redelijke/goede staat. Goed onderhouden; de afgelopen jaren zijn onder andere de tandwielen, hoofdgrijperkettingen, tegenplaat onder de snijplaat en cardankoppelingen naar de aanvoerkop vernieuwd (originele Bobst onderdelen). De grijperbalken zijn de laatste tijd niet vervangen, maar verkeren nog in goede staat. De kniegewrichten vertonen vrijwel geen slijtage; deze zijn vermoedelijk eerder vervangen en de machine is daarna weinig gebruikt. Er zitten nauwelijks krassen op. De machine is gedemonteerd opgeslagen in ons magazijn in Zuid-Nederland; dus momenteel niet aangesloten op stroom. Bij serieuze interesse van een potentiële koper zullen wij de machine verder opwaarderen, assembleren en de mogelijkheid bieden deze naar wens uitvoerig te testen. Itodpjtyqizjfx Akyok In dat geval bedraagt de prijs 22.000 euro, geladen op uw transportmiddel, EX WORKS.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, New Sunrise IW-45K punching and shearing machine available from stock. Specifications IW-45K: - Capacity: 45 tons - Punching capacity: Ø 22x15mm / Ø 40x8mm Itjdpfjvf I Ibjx Akysk - Throat depth: 165mm - Angle steel: 75x75x6mm at 90° - Flat bar: 300x10mm - Weight: 870 kg - Dimensions: 1050x760x1490mm Several models available from stock.

Stanje: novo, Leto izdelave: 2023, Sunrise pons-knipmachine IW-80SD Specificaties IW-80SD Capaciteit: 80 ton Ponscapaciteit: Ø26x22 mm / Ø50x12 mm Uitlading: 510 mm Hoekstaal: 150x150x12 mm, 90° Itsdevf I Rcopfx Akyjk Strip: 460x15 mm / 300x20 mm Gewicht: 2550 kg Meerdere modellen direct uit voorraad leverbaar.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls Itedpfexw D Udsx Akyek - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Leto izdelave: 2007, stanje: dober (rabljeno), PROIZVAJALEC – LVD, izdelano v ZDA/BELGIJI MODEL – GLOBAL 20 1225 LETNIK – 2007 NADZOR – FANUC 180I - PB NOSILNOST – 20 ton GLOBINA PROSTORA ZA OBRAČANJE – 1250,0 mm MAKSIMALNA VELIKOST PLOŠČE – 2500,0 x 1250,0 mm (1250,0 x 5000,0 mm) MAKSIMALNA TEŽA OBRAČANEGA DELA – 150 kg MAKSIMALNA DEBELINA MATERIALA – 6,0 mm Itodpfeiab Epjx Akysk MAKSIMALNA HITROST MIZE – 0 – 4330,0 REVOLVER – 30 POSTAJ, 4 SAMODEJNO INDEKSIRANE MAKSIMALNI PREMER UDARCA – 89,0 mm HITROST UDARCA – 350 UDARCEV/MIN HITROST IZREZAVANJA – 900 UDARCEV/MIN MOČ MOTORJA PRESE – 460 V, trifazni motor DIMENZIJE – 5560,0 x 5560,0 x 2400,0 mm TEŽA – 16.000 kg POVEČANE PREDNOSTI: MIZA ZA BRUŠENJE IZJEMNO MALA ŠTEVILA DELOVNIH UR ŠIROKA PONUDBA ORODIJ

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25147, skupna višina: 1.900 mm, skupna širina: 1.100 mm, skupna dolžina: 1.700 mm, Prodamo avtomatski napravo za nanašanje premaza za čolne Raimann LA 10, enakovredno modelu Ayen. Naprava je v brezhibnem delovnem stanju. Opremljena je s posodo za čolne. V kompletu je skoraj nova šoba za lepilo. Iodpfx Akozlx Rpeyotk AKCIJA: cena 2900 EUR, velja samo danes, 20. 08. 26, do 12:00.

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Na voljo je stroj za pregledovanje tekstila. Delovna širina: ca. 2000 mm, prikaz: digitalni števec dolžine, pregledna miza: integrirana osvetlitev ozadja, upravljanje: klasično preko elektro omare, funkcija: navijanje, odvijanje in pregledovanje tekstilnih trakov, upravljanje: klasično. Opremljen z osvetljenim preglednim zaslonom, digitalnim merilnikom metrov, elektro omaro z gumbi za upravljanje, preusmeritvenimi in navijalnimi valji. Teža: ca. 850 kg, skupne mere (D/Š/V): ca. 2800 mm / 1600 mm / 1900 mm. Ogled možen po dogovoru. Itedpezcfizefx Akysk

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, število kartuš s črnilom: 4, barvni kanali: CMYK, število tiskalnih glav: 8, loèitev (maks.): 1.200 DPI (pik na palec), število podajalnih pladnjev: 1, skupna dolžina: 2.710 mm, skupna širina: 1.610 mm, skupna višina: 1.875 mm, vrsta vhodnega toka: Enosmerni tok, vhodna napetost: 220 V, Namestitev pri stranki znotraj EU je vključena! - Natančna reprodukcija slik: Industrijski piezo tiskalne glave z ločljivostjo 1200 dpi za izjemno ostre podrobnosti in fotorealistično kakovost tiskanja. - Visoka proizvodna zmogljivost: Tehnologija CMYK v enem prehodu za hitro proizvodnjo v samo enem potegu. - Vsestranska uporabnost: Območje tiskanja do 251 × 252 mm za izboljšavo različnih formatov publikacij. - Dosledna kakovost tiskanja: Napredno upravljanje kapljic za dosledno reprodukcijo barv po celotni nakladi. - Optimizacija delovnega procesa: Naravna podpora za običajne formate datotek (PDF, TIFF) za brezhibno integracijo v delovne procese predtiska. TEHNIČNI PODATKI: Način tiskanja: Tisk v enem prehodu Barva: CMYK Vrsta črnila: Vodna pigmentna barva (CMYK) Tiskalne glave: Industrijske piezo tiskalne glave Ločljivost: 1200 × 1200 dpi / 600 × 1200 dpi Velikost kapljice: 7–8 pL Hitrost tiskanja: 1200 × 1200 dpi: 15 m/min 600 × 1200 dpi: 30 m/min Proizvodna zmogljivost: 60 kos/h MATERIALI Vrste materialov: Papir, karton Format materiala: Maks. 660 × 470 mm; min. 450 × 320 mm Maksimalna dolžina tiskanja: 251 mm Maksimalna širina tiskanja: 252 mm Formati datotek: TIFF, PDF, JPG, PNG PARAMETRI NAPRAVE Dimenzije (D × Š × V): 2710 × 1610 × 1875 mm Napajanje: 1-fazna izmenična napetost 220 V, 50 Hz, 5 kW Iedpfszupndex Akyjtk Teža: 1000 kg Okolje za delovanje: Prostor brez prahu, 20–26 °C, 40–60 % vlažnosti

Stanje: zelo dobro (rabljeno), Kataloška številka 8033 TEHNIČNI PODATKI maks. širina obdelovanca – zgornji valj: 510 mm maks. širina obdelovanca – spodnji valj: 450 mm maks. debelina obdelovanca pri obojestranski obdelavi: 200 mm – zgoraj: vlečna valjčka zaporni mehanizmi 1 zobati kovinski vlečni valj 2 kovinska vlečna valja, sekvenčna 1 zobati kovinski vlečni valj tlačno držalo skobeljni valj 510 mm, 4-nožni z možnostjo montaže profilnih rezil, cca 7,5 kW gladi kovinski vlečni valj gornja tlačna postaja na izhodu z 2 vlečnima valjema – spodaj: nastavljiva dovozna miza z vodilom skobeljni valj 300 mm, 3 noži, 3 kW drsni kovinski valj skobeljni valj 450 mm, 4 noži, 5,5 kW 2 kovinska vlečna valja, gladka – zadaj: 2 stranska vretena 1) desno, navpično 150 mm – 4 kW 2) levo, navpično 150 mm – 4 kW premer vretena: 40 mm vretena nastavljiva gor/dol, levo/desno vretena blokirna osi razporejene izmenično električna nastavitev višine Itedpfxsztziwe Akyok 2 hitrosti podajanja + brezstopenjska: 5–13, 13–36 m/min premer priključka za odsesavanje: 2x120 mm, 150 mm dimenzije (d/š/v): 3200x1500x1600 mm + upravljalna omarica teža: 1980 kg – izdelano na Portugalskem – električno dviganje mize – idealna za obdelavo mokrega in suhega lesa – 3 skobeljni valji + 2 vretena – zelo dobro ohranjena – rabljeni skobeljniki Neto cena: 38.900 PLN Neto cena: 9.260 EUR, odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo glede na nihanje tečajev)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Popolnoma obnovljena glava stroja za frezanja Pfauter PE150. Iedpfx Ajzr Hc Tskyotk

Stanje: dober (rabljeno), Leto izdelave: 2008, Avtomatski križno vezalni stroj z vrtljivim krožnikom Enojna vezava max. število paketov/min: 40 Dvojna vezava max. število paketov/min: 20 Križna vezava max. število paketov/min: 18 Itjdpfeg Nzv Uox Akyjk Širina paketa: 200-560 mm Dolžina paketa: min 200 mm Višina paketa: 10-440 mm Diagonalna mera paketa pri križni vezavi: max 560 mm Elektrika: 200-440V, 3-fazni AC, 50 Hz, 1,5 kW Teža: 540 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Avtomatski stroj za križno vezanje s rotacijsko ploščo. Posamezno vezanje, največ paketov/min: 35 Dvojno vezanje, največ paketov/min: 17 Križno vezanje, največ paketov/min: 15 Širina paketa: 200–560 mm Dolžina paketa: min. 200 mm Višina paketa: 10–440 mm Iedpfx Akjg Nkf Ujyjtk Diagonala paketa pri križnem vezanju: maks. 560 mm Elektrika: 200–440 V, 3-fazni AC, 50 Hz, 1,5 kW Teža: 540 kg

Stanje: rabljeno, CNC press brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Hydraulic press brake with 6-axis backgauge and CYBELEC control system Serial no.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Distance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Electrical connection: approx. 25 kW Mains supply: 400 Volts, 50 Hz, 50 Amps - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Ram equipped with servo valves and measuring system Y1 and Y2 - Safety light curtain FIESSLER AKAS - Operation via electric foot switch and/or two-hand control panel - Hydraulic tool clamping for upper tool (TRUMPF system) with 20 mm clamping groove Iedpfxeya Iaqj Akystk - Tool holder for lower tool, height 160 mm x width 60 mm, with slot 14 x 23 mm - Tool system TRUMPF, without tools Required space L x W x H: 0 x 2500 x 3400 mm Transport height: 3360 mm Weight: 17000 kg In good condition

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 10-166, OFFER 13467 Technical Data: - Max. material thickness at 40 kg/mm² tensile strength approx.: 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement approx.: W 550 x H 1200 x D 1200 mm - Weight approx.: 180 kg Itedjhrm Iujpfx Akysk

Stanje: rabljeno, številka stroja/vozila: 2796, Case Rounding Machine Hunkeler BDR 40 – fully cleaned and repainted – Serial No. 26964 Output: 250–300 pcs/hour Spine width: 10–120 mm Iodjh Axcvepfx Akyetk Spine length: up to 450 mm Online video inspection via Skype video We would be pleased to welcome your visit – further machines in stock Immediately available – ready for inspection Located in Emskirchen / Nuremberg – available for testing