Rom 226 Kg 1,77 M nakup rabljenega (103.526)

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.614 h, nosilnost: 4.000 kg, dvižna višina: 3.605 mm, vrsta goriva: električni, gradbena višina: 2.490 mm, vrsta prenosa: samodejen, Yale ERP40AKE. Maximum lifting capacity 4,000 kg and lift height of 3,605 mm, as well as two hydraulic auxiliary functions for e.g. side shift, fork tilt, etc. - Yale ERP 40AKE - Lifting capacity 4,000 kg at 500 mm load center - Maximum lift height 3,605 mm - 2x auxiliary hydraulics - Tyres 60% Dkodpfxjv Tt Ngo Aplsl - Fork length 1,600 mm - Overall length without forks 2,315 mm - Overall width 1,320 mm - Mast height 2,490 mm - Free lift 150 mm - Lift height 3,605 mm - Unladen weight 4,795 kg - Total weight with battery 7,035 kg - One-owner - 80 Volt batteries - 14 kW drive motor - 13.2 kW hydraulic motor - Only 1,614 operating hours - Year of manufacture 2002 - Commissioned in 2006 Financing is available through our partner banks; we are happy to assist you. We expressly reserve the right to prior sale, as this item is also listed on other platforms. Accessory information provided without guarantee. Subject to changes, prior sale, or errors. We offer and strongly recommend a viewing and inspection to ensure the buyer has an accurate understanding of the condition and suitability. Viewings and inspections are possible and expressly welcome by appointment at any time.

Stanje: rabljeno, prevoženi kilometri: 90.000 km, moč: 380 kW (516,66 KM), prva registracija: 09/1994, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: oranžna, Oprema: žerjav, Here we offer a mobile crane superstructure from Palfinger, type PK 680 TK. The crane has been completely refurbished and newly painted. A large number of hydraulic hoses have been replaced. The crane can be operated both from the cab (high-seat control) and via radio remote control. • Palfinger PK 680 TK • Radio remote control • Cab control • 26.7 m – 390 kg • 23.2 m – 570 kg Djdpfx Aewa Hyqoplskl • 19.8 m – 900 kg • 16.4 m – 1,170 kg • 12.9 m – 1,590 kg • 9.4 m – 2,410 kg • Winch with 3,200 kg capacity • Extendable counterweight • Completely overhauled and newly painted • Many hydraulic hoses replaced • Weight approx. 13,000 kg • Financing available through our partner banks – we are happy to assist. • Please note that interim sale is expressly reserved, as this item is also offered on other platforms. Details of accessories are without guarantee. Subject to changes, interim sale, or errors. We strongly recommend and offer an inspection and assessment to avoid any misunderstandings concerning the condition and suitability of the item. Viewing and testing are possible at any time by prior appointment and are expressly encouraged.

Leto izdelave: 2011, stanje: rabljeno, ZELO DOBER IN VAREN VILIČAR | SIGMA CERTIFIKAT DO FEB. 2026 | NOVE VILIČNE VILIČE | ZELO VISOK DROG | MEHKE PNEVMATIKE. Dksdpfxewnfrbj Aplel

Stanje: novo, Naprodaj nova, neuporabljena industrijska črpalka KSB Etachrom B – kompletna, v originalni embalaži, z dokumentacijo proizvajalca. Črpalka je namenjena industrijski in procesni uporabi – visoka kakovost izdelave, nemška proizvodnja. Tehnični podatki (z identifikacijske ploščice): Proizvajalec: KSB Serija / tip: Etachrom B Zmogljivost (Q): 18,0 m³/h Dvižna višina (H): 45,0 m Premer rotorja: Ø 181 mm Hitrost vrtenja: 2904 obr./min Delovni tlak: PN10 Viskoznost medija: 1,0 mm²/s Leto izdelave: 2023 Izdelava: Made in Germany Oznake: CE, EAC, UKCA Stanje Novo – skladiščeno Nikoli zagnana Originalna škatla Navodila za uporabo / montažo priložena Stanje natanko kot na slikah Uporaba industrijske inštalacije procesni sistemi hlajenje, tehnološka voda tehnične in proizvodne inštalacije Dedpfxoyhhqxo Aplekl

Stanje: dober (rabljeno), Mosca RO-M Fusion 800×600 stroj za povezovanje Dksdpoywdtcefx Aplel Stroj je 100% delujoč in pripravljen za proizvodnjo. Proizvajalec: Mosca, Nemčija. Letnik izdelave: 2019. Naprava je nepogrešljiva za odpremo, za ovijanje težkih pošiljk, kot so letaki ali katalogi. 5-mm PP trak okrepi embalažo in omogoča ročaj za lažje prijemanje in transport. Vrteča nadzorna plošča Nastavljiva dolžina in napetost traku Napajanje: 230V Teža: 240kg

Stanje: zelo dobro (rabljeno), Precizni delavniški mikrometer priznane nemške znamke Mahr, model Marameter M, namenjen za zelo natančne meritve zunanjih premerov v območju 0–40 mm. Naprava je v zelo dobrem stanju, popolnoma funkcionalna, shranjena v originalnem zaščitnem lesenem kovčku. Specifikacije: • Merilno območje: 0 – 40 mm • Tip: Marameter M • Proizvajalec: Mahr (Nemčija) • Kataloška številka: 3206064 • Namen: natančno merjenje zunanjih premerov / gredi / cilindričnih elementov • Kovinsko, proti obrabi odporno ohišje • Roka z zamenljivimi merilnimi nastavki • Visoka stabilnost in ponovljivost meritev • V kompletu originalna lesena škatla Stanje: • Rabljeno, odlično ohranjeno • Zadnja kalibracija: 2023 • Pripravljen za uporabo v merilnici ali laboratoriju. Dksdpfoxmlgtox Aplol

Stanje: novo, Stromag FLPK31/0125-30 AD 1 servomotor z reduktorjem RPL16-1SK Pfeffer&Partner, serijska številka po fotografiji, neuporabljen, 100% delujoč, obseg dobave po slikah. Dkedpfjx Dwdrex Aplsl

Leto izdelave: 2021, stanje: novo, Gastro M Electric Griddles Demonstration unit without original packaging. NEW MACHINE with warranty. The Gastro M series is robust, powerful, energy-efficient, easy to clean, and features a modern appearance. All units are constructed from stainless steel and can be interconnected using joining bridges. Gastro M is the indispensable link in the professional kitchen. Electric griddles with a smoothly polished cooking surface. Rapid heat-up time, integrated fat collection drawer, thermostatically controlled zone with built-in on/off switch and indicator light. Easy to clean. Stainless steel housing Dedpfx Aehgwd Toplskl High-quality cast steel cooking plate Integrated grease collection drawer Adjustable thermostat Even heat distribution Suitable for base cabinet AGL913 & base frame AGL911 Specification: Gastro M Model 60/30FTE 300 mm wide Power: 3 kW / 400 V Dimensions: 600 (D) x 300 (W) x 280 (H) mm Weight: 27 kg Accessories available on request. If you require detailed consultation, please contact us. All dimensions are approximate. Photo similar.

Stanje: skoraj kot novo (rabljeno), Stroj po splošni obnovi Cena: 4.500 EUR Mešalnik za testo Dkedsx N Efqspfx Aplsl Z lopatico Kemper Stroj ima 2 hitrosti Posoda in mešalo iz nerjavečega jekla Mobilna enota na kolesih Avtomatski časovnik Prostornina: 180 litrov / 120 kg testa ali 75 kg moke

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors Dksdpfx Apong Exajlol • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. Dksdpfendn Agsx Apljl The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 Dkedonh R Ekjpfx Aplel The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg Dkedonfvx Nepfx Aplel • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room Dsdpfxsndk N Ao Aplskl • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: Dedpfxsng Amko Aplokl The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction Dksdpfxjng A R Sj Apljl TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software Dkjdpfx Ajnh R Susplsl • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance Dkjdpfxonfvy Uo Aplel

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification Djdpong Ax Ssfx Aplekl OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Dkodpshx Elfefx Apljl Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: rabljeno, We are offering a used drive-through scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Dedpsy Ep Thofx Aplokl Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACTS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment terms will be agreed upon with the order. The price is per unit/net price, or as indicated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveying technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trades. We continuously offer attractive used equipment from a variety of manufacturers/brands at competitive prices. If you have any questions, please feel free to contact us. Four wins – The four success pillars of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, KEG-naprava, proizvajalec M+F, tip: Micromat M 2/2, z eno postajo za notranje čiščenje in eno polnilno postajo, s posodo za čistilno sredstvo. Djdsyzhviepfx Apljkl

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 03/2014, skupna dolžina: 13.980 mm, skupna širina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, medosna razdalja: 8.740 mm, Leto izdelave: 2014, Oprema: ABS, = Additional Options and Equipment = - BPW axles - EBS - Air suspension - Drum brakes = Notes = Djdpfxjy H Efxe Aplekl 2014 Schmitz Cargobull 45FT HC chassis with ABS/EBS, BPW Eco-Plus axles with drum brakes, 45FT HC, unladen weight: 4,240 kg, permissible total weight: 39,000 kg, tire size: 385/55 R22.5 (tread depth left: 7/3/7 mm; tread depth right: 7/4/6 mm), Dutch registration = Further Information = Axle configuration Tire size: 385/55 R22.5 Axle brand: BPW Eco Plus Brakes: drum brakes Suspension: air suspension Rear axle 1: max. axle load: 9,000 kg; tire tread left: 45%; tire tread right: 45% Rear axle 2: max. axle load: 9,000 kg; tire tread left: 20%; tire tread right: 25% Rear axle 3: max. axle load: 9,000 kg; tire tread left: 45%; tire tread right: 40% Weights Unladen weight: 4,240 kg Payload: 34,760 kg Gross vehicle weight: 39,000 kg Functional Body make: Schmitz Cargobull SGF*S3 Condition Technical condition: good Visual condition: good Identification Registration number: ON-83-GH Further information Please contact Arne Honingh for more information.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Dksdpfxswd Twqe Aplsl Space-saving and continuously adjustable; the boom arms can be locked Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS Dksdjyt Nm Sspfx Aplel This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit