Rego Sm 3 nakup rabljenega (65.550)

Stanje: rabljeno, Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo reduktorski motor, sinhronski motor - Predaja: v trenutnem stanju, kot je bilo pregledano - Priključni vtikač: poškodba - glejte fotografije - Proizvajalec: Siemens Wittenstein, servo reduktorski motor Nedpfx Aoyh Ufgegxscr - Sinhronski motor: Siemens tip 1FK7101-2AF71-1RG0 - Napetost: 278 V - Reduktor: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 - Gred: Ø 32 x 55 mm - Zaščitni razred: IP64 - Dimenzije: 450/190/V255 mm - Teža: 33 kg

Stanje: dober (rabljeno), Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo-motor z reduktorjem, sinhronski motor - Proizvajalec: Siemens Wittenstein, servo-motor z reduktorjem Ncedpeyh Huyofx Agxsr - Sinhronski motor: Siemens Tip 1FK7101-2AF71-1RG0 - Napetost: 278 V - Reduktor: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 - Gred: Ø 32 x 55 mm - Zaščitni razred: IP64 - Količina: 3 servomotorji na voljo - Cena: na kos - Dimenzije: 450/190/V255 mm - Teža: 33 kg/kos

Stanje: rabljeno, lastna masa: 8.240 kg, največja dovoljena obremenitev: 27.760 kg, skupna masa: 36.000 kg, prva registracija: 03/2022, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 9.930 mm, širina tovornega prostora: 2.374 mm, višina nakladalnega prostora: 2.210 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, medosna razdalja: 1.310 mm, barva: srebrn, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Chassis painting: RAL 7021 black grey, body RAL 9006 white aluminium, tarpaulin color 7500 white aluminium Nsdpfx Aoyl U Hzogxecr Hardox * A-board * Side underride protection * Operator’s stand * Air pressure gauge * Single wheel mudguards * Combination rear wall 1/2 - 1/2 * Plastic toolbox * Single lift axle * Tipping trough without chute * Low-pressure tipping cylinder * Rolling tarpaulin * Reversing lights * SAF axles * Disc brakes * Smart Board * Folding underrun protection * Full load support We expressly reserve the right of prior sale, as this item is also being offered on other platforms. Accessories stated without guarantee. Modifications, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to avoid any misunderstandings regarding the condition or suitability of the vehicle. Viewings and inspections are possible at any time by prior appointment and are expressly welcome. We handle all formalities and will deliver the vehicle with the desired export license plates for an additional charge. Some images have been edited and serve only as an initial preview; if interested, please contact us to request current photos.

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Throat depth: 315 mm Horizontal throat depth: 310 mm Vertical throat depth: 230 mm Saw band length: 2530 - 2650 mm Saw band width: 13 mm Band speed: 12 - 750 m/min Table size: 500 x 500 mm Table height above floor: 950 mm Total power requirement: 1.3 kW Machine weight approx.: 450 kg Machine dimensions approx. (LxWxH): 0.8 x 0.7 x 1.65 m Steel and metal band saw File band length: 2550 mm Additional equipment: Saw band processing unit Ideal -> Saw band cutting device – Saw band welding device – Saw band grinding device Cooling via spray system Foot control Accessories: Ncjdova E E Topfx Agxer -various saw bands -1x drive wheel Ø 320 mm -Saw band sold by the metre RRR Röntgen

Stanje: dober (rabljeno), Koenig Rex Futura II kofna valjarna. V zelo dobrem stanju, neposredno iz pekarne. Fotografije prikazujejo stroj v skladišču, pred čiščenjem. Boljše fotografije sledijo. Ncodpfxevth Auj Agxer

Stanje: rabljeno, prevoženi kilometri: 399.999 km, moč: 300 kW (407,89 KM), prva registracija: 04/2012, vrsta goriva: dizel, skupna masa: 35.000 kg, velikost pnevmatike: 315/80 R 22,5, konfiguracija osi: 8x4, medosna razdalja: 4.200 mm, zavore: retarder, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 2, Oprema: ABS, kabina, klimatska naprava, zapora diferenciala, Lokacija vozila: Bovenden, domača registracija, 1x komfortni sedež, zadnje steklo, električna ogledala, ogrevana ogledala, električno okno levo, električno okno desno, klimatska naprava, senčnik, menjalnik Telligent, ABS (protiblokirni sistem), retarder, visok izpuh, zapora diferenciala, listnato vzmetenje, preklopna zaščita podvozja, zelena okoljska nalepka. Medosna razdalja: 4200 mm. Sklopkov pedal, kolutne zavore na prednji in zadnji osi. Prevoženih kilometrov: 401.992 km. INFORMACIJE O DODATNI OPREMI BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Nedpfxsyhc Avj Agxocr

Stanje: rabljeno, prevoženi kilometri: 439.057 km, moč: 320 kW (435,08 KM), prva registracija: 06/2011, vrsta goriva: dizel, skupna masa: 35.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 8x4, medosna razdalja: 4.500 mm, zavore: zaviranje z motorjem, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 2, Oprema: kabina, klimatska naprava, spojka prikolice, zapora diferenciala, Lokacija vozila: Belgija 1, s hišo, 1x udobni sedež, električna ogledala, ogrevana ogledala, električno okno levo, električno okno desno, klimatska naprava, senčnik, 16 stikal, zapora diferenciala, rotacijska opozorilna luč, listnato vzmetenje, vlečna kljuka z zrakom in lučmi, zložljiva zaščita podvozja, zelena okoljska nalepka. Medosna razdalja: 4500 mm. Kolutne zavore na prednji in zadnji osi, vlečna kljuka 50! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane! Ncjdpfoyg N Uvox Agxor

Stanje: rabljeno, Leto izdelave: 1994, x-axis travel: 0 mm Ncsdpet Hw Dqofx Agxsr y-axis travel: 0 mm z-axis travel: mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Marking machine with rotary table (bevel gears), 4 axes, PV 70 head with WINGRAED and WINSMAT software

Stanje: rabljeno, Leto izdelave: 1998, X-travel: 800 mm Y-travel: 500 mm Z-travel: 510 mm Total power requirement: 60 kW Machine weight approx.: 10 t Space requirements approx.: m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and accuracy, Model: MC 535 SM Year of manufacture: 1998, # 535 1107 TECHNICAL DATA: Bar diameter/profile size x max. length: 80 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 500 mm Milling head vertical travel Z-axis: 510 mm Workpiece axis rotation/swivel: 360°/120° Installation height under vertical spindle approx.: 350 mm Spindle taper: HSK 63 Spindle speeds, infinitely variable: 36 - 10,000 rpm Feed rate all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW - 380 V - 50 Hz Weight approx.: 10 t Accessories / Special equipment: - CNC path control FANUC Type 16iM, for all 5 axes with display, direct input, various subprograms, tool corrections, tool monitoring, parallel programming, and much more - Bar loader magazine on the left side of the machine for up to 10 bars, each Ø 80 mm - Integrated CNC rotary-swivel device with collet chuck for bar material, in combination with hydraulic tailstock as counter-support - Automatic tool magazine with 66 tool positions, Ø 125 x 300 mm length - Tools also with ICS (internal coolant supply), independent tool data management, chip-to-chip time 4 sec Njdpst Hwtfefx Agxscr - Tool breakage monitoring via laser light barrier, etc. - Gripping and swiveling unit to hold the workpiece during cut-off milling, remove it from the remaining bar, and transfer to a conveyor as a finished part - Fully enclosed working area, chip conveyor included, but without coolant system - Touch probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Stanje: rabljeno, Leto izdelave: 1997, x-travel 800 mm y-travel 400 mm Ncodpfxet Hwx Ij Agxsr z-travel 350 mm Total power requirement 40 kW Machine weight approx. 8 t Space requirement approx. m CNC-controlled vertical machining center for bar processing. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Type MC 530 SM Year of manufacture 1997, #530 1195 TECHNICAL DATA: Bar diameter / profile size x max. length: 60 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 400 mm Milling head travel vertical Z-axis: 350 mm Workpiece axis rotation/swivel: 360° / 120° Mounting height under vertical spindle approx.: 300 mm Spindle taper: HSK 63 Spindle speeds continuously variable: 36 – 10,500 rpm Feed rates, all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 14 to 32 kW Total drive: 40 kW - 380 V - 50 Hz Weight approx.: 8 t Accessories / Special equipment: CNC path control FANUC type 16 MB, for all 5 axes with monitor and direct input, various subprograms, tool corrections, tool monitoring, parallel programming, 3-D and helical interpolation, and much more. IRCO bar loading magazine mounted on the left of the machine, for up to 10 bars with a diameter of 60 mm. Mounted CNC rotary/swiveling unit with collet chuck system for holding bar stock in combination with hydraulic tailstock as counter support. Automatic tool magazine with 42 tool stations, Ø 100 x 200 mm length. Tools also with internal coolant (IKZ), with separate tool data management, chip-to-chip 4 sec. Tool breakage monitoring via laser light barrier, etc. Pneumatically retractable finished part catcher between workpiece head and tailstock; conveyor belt for parts removal without opening the work area. Fully enclosed work area, chip conveyor installed, but without coolant supply (central provision). Thread cutting possible without compensating chuck, no toolholders included. Very robust machine.

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel: 800 mm y-axis travel: 500 mm z-axis travel: 510 mm Total power requirement: 60 kW Machine weight: approx. 10 t Required floor space: approx. [ ] m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Model: MC 535 SM Year of manufacture: 2000, # 535 1108 TECHNICAL DATA: Bar diameter/profile size x maximum length: 80 x 800 mm (!) Longitudinal milling slide travel, X-axis: 800 mm Transverse milling slide travel, Y-axis: 500 mm Vertical milling head travel, Z-axis: 510 mm Workpiece axis rotation/swiveling: 360° / 120° Mounting height under vertical spindle: approx. 350 mm Spindle taper: HSK 63 Spindle speeds, steplessly adjustable: 36 – 10,000 rpm Feed rates all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW – 380 V – 50 Hz Weight: approx. 10 t Accessories / Special equipment: Nodpfx Ast Hwyrogxjcr CNC path control FANUC Type 16iM, for all 5 axes, with monitor, direct input, various subprograms, tool correction, tool monitoring, parallel programming, and much more Bar loading magazine mounted on the left side, holds up to 10 bars Ø 80 mm Built-in CNC rotary-swivel unit with collet chuck for holding bar material, combined with hydraulic tailstock as counter support Automatic tool magazine with 66 positions, Ø 125 x 300 mm Tools also with ICS, dedicated tool data management, chip-to-chip 4 sec. Tool breakage control via laser light barrier, etc. Grip and swivel unit for holding the workpiece during 'cut-off milling', to detach it from the remaining bar and deposit it as a finished part on a conveyor Completely enclosed working area, chip conveyor built in, but no coolant system Probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Stanje: rabljeno, prevoženi kilometri: 143.560 km, moč: 335 kW (455,47 KM), prva registracija: 03/2021, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 04/2026, zavore: retarder, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.500 mm, skupna višina: 3.600 mm, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Suspension: Leaf/Air Wheelbase: 4,800 mm Axles: Lift/Steering axle DUOMATIC Navigation system Reversing camera Lane assist Includes Palfinger rear crane preparation BK009-01A Special equipment: 2-line trailer brake, connections on the left 220 Ah battery Standard and DuoMatic brake connection Interactive multimedia cockpit Air horns (2) on cab roof Electrical pre-installation in cab 24V / 100A Cab: Folding cab entry step Cab: Steel-sprung, comfort Remote online query function Speed limiter system 12-speed gearbox - Type: G 230-12 Rear axle crown wheel 300 Interior filter for construction vehicles Comfort telephony (Bluetooth) with induction charging cradle 3-piece mudguard with spray protection Fuel tank: 290 l steel, left side Cool box / refrigerator Enhanced engine brake Trailing axle (8 t), steered, liftable, load-relief PTO MB 123-10c Wheelbase variant 4,850 mm Frame lowering without residual pressure control on bellows Frame overhang 1,300 mm Rain sensor Retarder Reinforced rear cross member Additional remote control key (2x) Seat upholstery: passenger seat velour Seat upholstery: driver's seat Dinamica fabric Cab seats: driver’s suspension seat, climate-controlled Cab seats: foldable driver’s seatback Exterior sun visor Side window sun roller blind, driver’s door Additional stabilizer, rear/trailing axle Steel rims 11.75x22.5 (on front axle) Additional 24V socket in passenger footwell Pre-wiring for 4 surround cameras (display on onboard monitor) Pre-wiring for beacon light Transmission oil cooler Further equipment: Emission standard EURO 6 Axle configuration: 8x2/4 Front axle load 7.5 t Heated approach/front mirror 24V/15-pin trailer socket Arocs 5, exhaust to right outside Two-piece exhaust system Exhaust pipe elbow above 2nd axle Batteries arranged one above the other Compressed air connection in cab Steel air tanks Ncsdpfsw Umkdsx Agxjr Condensate monitoring air system Medium compressed air unit Automatic driving light activation (light sensor) Cab: Hydraulic tilting device Cab: M ClassicSpace, 2.30 m, tunnel 170 mm Suspension: Leaf/air Front suspension: 7.5 t, 3 leaf Electric window lifts Tinted windscreen Vehicle without rear cab window Alternator 100A AdBlue tank: 25 l Manual tilt sunroof (steel) Body/chassis: chassis, comfort locking system Non-regulated power steering pump Multifunction steering wheel Power steering oil cooling 2-cylinder air compressor Heated air dryer Engine 10.7 l – 335 kW inline 6-cylinder diesel (OM 470) Engine variant OM 470 Application: distribution transport Ramp mirror Residual heat utilization Disc brakes with partial protection Disc brakes on front and rear axle Remote control key (2) LED side marker lights with flashing function Servotwin power steering Cab seats: passenger function seat Front spray protection Front axle stabilizer Steel rims 9.00x22.5 12V socket in passenger footwell Front bumper corners in steel version Tachograph / EC recording equipment Automatic daytime running lights Truck Data Center 7 (fleet management system) Fixed rear underride guard Front underride guard Toll collection pre-installation Truck Data Center preparation (fleet management system) Drop center front axle Regulated water pump Perm. gross vehicle weight 32.00 t We are also happy to assist you with financing/leasing through our partners. All specifications without guarantee. Errors and

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Nsdpfxehp Rc Ij Agxjcr Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Kaeser Screw Compressor SM 13 - 11 bar, Demonstration Model at Special Price Free air delivery at 11.0 bar (g): 1.07 m³/min Total electrical power consumption at 11.0 bar (g): 9.63 kW Specific power: 9.00 kW/(m³/min) Maximum operating overpressure: 11.0 bar Drive motor efficiency at full load: 91.7% Drive motor efficiency class: IE4 Drive motor rated power: 7.5 kW Drive motor speed: 2955 rpm Drive motor degree of protection: IP 55 Power supply: 400 V / 3 Ph / 50 Hz Compressed air discharge temperature above ambient (at +20°C, 30% rel. humidity): 8 K Nodpfx Agsvk R A Soxjcr Sound pressure level: 65 dB(A) Compressed air outlet: G 3/4 Location: Available immediately ex stock 54634 Bitburg

Stanje: pripravljen za uporabo (rabljen), Mössner Rekord SM / 320 Vertical Bandsaw for Metal Throat Depth: 310 mm Wheel Diameter: 320 mm Maximum Workpiece Height: 200 mm Working Height: 950 mm Cutting Speed: 12 - 750 m/min Power Supply: 380 Volt, 50 Hz 4 gearbox speeds Ncsdpfx Aowty Dpogxer Required space approx. 800mm x 770mm x 1700mm (L x W x H) Weight approx. 560 kg Bandsaw Welding Device: Ideal Table: 500mm x 500mm You are welcome to come and inspect the machine. We are happy to organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. Stated company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the item description may occur and are subject to change.

Stanje: rabljeno, Drilling capacity: 32.0 mm Drilling capacity in cast iron: 35.0 mm Morse taper: MK 3 Spindle stroke: 120 mm Throat depth: 260 mm Column diameter: 110 mm Table size: 515 x 355 mm Speed range: 80 – 1400 rpm Total power requirement: 0.7 / 1.3 kW Weight: 175 kg Dimensions (L x W x H): 750 x 520 x 1820 mm From a training workshop Well-maintained condition (!!) Ncodpfxexabp Ro Agxsr Equipment: - Column drill driven by V-belt - Adjustable drilling depth stop - Pole-reversible drive motor - Manual spindle feed via cross handle - Work table with 3x T-slots - Quick-action drill chuck including taper arbor - Table height adjustment via hand crank - Main switch at the front - Power cable with 16A plug included

Stanje: novo, Table length: 3,000 mm Table width: 1,500 mm Laser output: 4,000 watts X-axis travel: 3,050 mm Z-axis travel: 150 mm Y-axis travel: 1,550 mm Cutting heads: Precitec HPSSL Total power requirement: 22.0 kW Machine weight: approx. 14,200 kg Dimensions (L x W x H): 10,360 x 5,110 x 2,310 mm Features: - MOMENTUM GEN-2 fiber laser cutting system 3,000 x 1,500 mm - Resonator: Ytterbium YLS 4000 compact (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD/CAM software, BECKHOFF Controller CP 6242 - 15" touchscreen, keyboard, control panel, alphanumeric keyboard - Slag removal conveyor under the cutting table - Additional loading unit Cutting capacities: - Mild steel: up to 20 mm - Stainless steel: up to 12 mm - Aluminium: up to 10 mm - Brass: up to 6.0 mm - Copper: up to 5.0 mm Working area: - Max.: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - Max. axis speed: 100 m/min (simulated) - Axis speed X/Y: 100 m/min (single) - Positioning accuracy: ±0.03 mm/min - Torch height: 125 - 200 mm Loading table: - Quantity: 2 (35 seconds for table exchange) - Automatic table changeover Assist gases: - Mild steel: Oxygen (0.5 - 25 bar) - Stainless steel: Nitrogen (0.5 - 25 bar) - Aluminium: Compressed air or nitrogen (0.5 - 25 bar) Included: - Compatible extraction system - Safety light curtain - Basic spare parts package Why Fibermak / Fiber laser? - Up to 3 times faster cutting compared to other laser technologies - Designed for thin sheet cutting - Axis speed: up to 141 m/min - Accelerations up to 2G - Fiber laser is green laser technology - Minimum 50% energy cost savings - No need for laser gas mixtures - No need for optical components (very low maintenance) - Save up to 50% per part through efficient production - Expanded options: capable of cutting reflective materials such as aluminium, copper, brass, etc. - Additional benefits: precise cuts, smooth surface quality - Heavy-duty frame construction - Fitted with globally recognized, durable, high-quality components - Creative design with consistently leading-edge technology and quality - High reliability - High efficiency Nedpfx Aexaa Hhjgxecr - High quality - CE declaration

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Year of manufacture: 2021 Ncodpfsxnnd Rjx Agxjr Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Power supply: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power cable with 32A plug

Stanje: rabljeno, Leto izdelave: 1968, Technical Details: X-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table size: 600 x 320 mm Throat depth: 310 mm Swivel range: 12° Vertical grinding slide adjustment: 110 mm Traverse speeds: 0 - 6 m/min Grinding spindle speed: up to 50,000 rpm Peripheral speed: max. 35 m/sec Power consumption: approx. 7 kVA Drive power: 6 kW Machine weight approx.: 2 t Space requirements approx.: 3 x 3 x 3 m Rotary table diameter: 300 mm Ncjdpjvbzwzjfx Agxjr Frequency converter: LANDERT SGI

Stanje: novo, Table length: 3000 mm Table width: 1500 mm Torch heads: Precitec ProCutter Laser power: 6000 W X-axis: 3050 mm Z-axis: 150 mm Y-axis: 1550 mm Ncodpfx Agegvq D Usxor Total power requirement: 21 kW Dimensions: 9190 x 3710 x 2200 mm Machine weight: approx. 11,200 kg Equipment: - Ytterbium Resonator YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - Automatic lubrication system - CAD/CAM Software LANTEK EXPERT CUT - 17" touchscreen, keyboard, operator panel - Scrap conveyor beneath cutting table - Additional loading unit Cutting capacities: - Mild steel: 25 mm - Stainless steel: 15 mm - Aluminium: 12 mm - Brass: 8 mm - Copper: 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - Max. axes speed: 100 m/min (simulated) - Axes speed X/Y: 100 m/min (single) - Positioning accuracy: ± 0.03 mm/min - Cutting height: 125 - 200 mm Loading table: - Quantity: 2 (35 sec per change) - Automatic table changing - Max. load: 2,500 kg Assist gases: - Mild steel – Oxygen (0.5 - 25 bar) - Stainless steel – Nitrogen (0.5 - 25 bar) - Aluminium – Compressed air or nitrogen (0.5 - 25 bar) Incl.: - Compatible extraction/filtration system - Sick light curtain safety device - Basic spare parts package Why Fibermak? - Up to 3 times faster cutting than other laser technologies - Machine designed for cutting thin sheet metal - Axes equipped with linear motors/servo motors, reaching up to 141 m/min - Accelerations up to 2G - Fiber laser is green laser technology (saves at least 50% in energy costs) - No need for laser gas mixture - No need for optical components, resulting in low maintenance - Save up to 50% per part due to more efficient production - Extended capabilities: cutting of reflective materials such as aluminium, copper, brass, etc. - Additionally, precise cuts and smooth surface quality - Heavy-duty frame design, equipped with globally renowned, durable, high-quality components - ERMAK passes on price advantages to customers through fast and high-quality production - Creative design, consistent state-of-the-art technology & quality - High reliability - High efficiency - High quality - CE declaration of conformity

Stanje: rabljeno, Centrifugal pump, water pump, submersible pump - Manufacturer: Schmalenberger, centrifugal pump type SM 50-13/2 - Flow rate: 21 m³/h Ncsdoi Sdggopfx Agxor - Pressure: 2 bar - Motor power: 2.2 kW - Speed: 2840 rpm - Pipe connection: see pictures - Dimensions: 590/245/H440 mm - Weight: 56 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Servomotor, električni motor, enosmerni motor, servo reduktorski motor, sinhronski motor Ncjdpoxr T Szsfx Agxjr - Proizvajalec: Siemens Wittenstein, servo reduktorski motor - Sinhronski motor: Siemens Tip 1FK7042-2AF71-1RG0 - Napetost: 270 V - Hitrost vrtenja: 3000 / max: 9000 min⁻¹ - Reduktor: Wittenstein SP 075S-MC1-3 -1E1-2K i= 3 - Gred: Ø 22 x 35 mm - Količina: 1x reduktorski motor na voljo - Dimenzije: 340/96/H140 mm - Teža: 8,1 kg

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Ventilator, ventilator, elektromotor, puhalo, radialni ventilator, zasilni izpušni ventilator, dimni ventilator, aksialni ventilator -Ohišje: pocinkano jeklo -Stanje: ventilatorji so neuporabljeni (skladiščno blago) -Proizvajalec: Fläkt Woods, aksialni ventilator -Tip: 90JM/25/4/9/24 3 S M3AA132MA INT BMLESS -Moč: 7,5 kW 1462 vrt/min Ncsdpfoxd T D Isx Agxer -Ventilatorsko kolo: Ø 900 mm -Količina: 3x ventilator na voljo -Cena: na kos -Dimenzije: 1140/1140/H610 mm -Teža: 140 kg/kos.

Stanje: rabljeno, Servo motor, electric motor, DC motor, stepper motor, stepping motor Ncsdpfxohwgd Ue Agxor - Manufacturer: Zebotronics Servo motor, stepper motor from vacuum packaging machine Tiromat 3000/430 - Type: SM 87.3.18.M7 - Shaft: Ø 10 x 30 mm - Quantity: 1x stepper motor available - Dimensions: 175/85/H110 mm - Weight: 3.7 kg

Stanje: dober (rabljeno), Thread cutting machine, pipe thread cutter, thread cutting head with chasers, pipe threader, thread cutting machine, pipe thread cutter - For: Pipe size: max. 2 inches Ncjdpfx Asdm T Taogxsr - Cutting dies: 1/2"–2" inches - Operating voltage: 240 volts - Dimensions: 1000/600/H1114 mm - Weight: 80 kg