Pločevine Objemka nakup rabljenega (5.975)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Lhjdpfoypbqnox Al Nof Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Lodpfxoypbqho Al Nohf Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control Ljdpfoypbqbox Al Nehf IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Lodpfjypbp Rsx Al Nshf Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Ljdpfx Ajypbp Del Njhf Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 5 obr/min, dolžina pomika os W: 800 mm, premer vretena: 160 mm, obremenitev mize: 80.000 kg, dolžina mize: 8.000 mm, širina mize: 4.000 mm, vrtilni moment: 2.024 Nm, moč: 40 kW (54,38 KM), Heidenhain 530 Lhjdoy Avitepfx Al Nof

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1. postaja: odstranjevanje robnih srhov pločevine, 2. postaja: odstranjevanje srhov pri izrezih in zunanjih radijih, z VA krtačami; maksimalna debelina pločevine: 5 mm Lhjdpfx Aloyyahbe Nef

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. Ljdjynmw Repfx Al Nehf * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Lsdpfx Aloynmwke Njhf Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Leto izdelave: 2001, stanje: rabljeno, Univerzálna skúšobná stanica na plechy a pásy Univerzálna skúšobná stanica na plechy a pásy Erichsen Model 145-60 Stav: Použité Rok výroby: 2001 Technické údaje Hydraulický pohon Max. výkon motora: 11,5 kW / 1500 1/min Výkon čerpadla (malý okruh): 12,3 l/min Výkon čerpadla (veľký okruh): 31 l/min Skúšobný valec Dierovacia sila: 665 kN / 160 bar Hydraulické otváranie skúšobnej hlavy Max. pracovný tlak: 95 bar Držiaci tlak: 50 bar Prepínateľné sily ťahu Malý rozsah ťahovej sily: 37 kN / 10 bar Lsdpfxsyr R Uhs Al Nehf Stredný rozsah ťahovej sily: 225 kN / 60 bar Veľký rozsah ťahovej sily: 600 kN / 160 bar Max. zdvih ťahu: 150 mm Max. rýchlosť ťahu: 750 mm/min Indikácia zdvihu lisovacieho tŕňa: rozlíšenie 0,1 mm Elektrické pripojenie Prípojka: 400 V trojfázový, 50 Hz Istenia: 25 AT a 35 AT Prevádzková teplota okolitého prostredia: medzi +5° a +50°C Rozmery a hmotnosť Rozmery (D/Š/V): 1800 mm / 1320 mm / 1400 mm Čistá hmotnosť: cca 2400 kg

Stanje: dober (rabljeno), Centre height 630 mm Clamping plate diameter 1000 mm Indexing 1° Spindle diameter 100 mm Dimensions (L x W x H) 1100 x 750 x 1170 mm Weight approx. 2000 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Lhjdpfov N Hk Aox Al Nof

Stanje: rabljeno, Širina lima 3355 mm Debljina lima 63,5 mm Prečnik valjka 686 mm Napon 400 V Ukupna potrošnja energije 150 KS Težina mašine cca. 95 t Potrebna površina cca. 62 m Ukupna težina 95 tona Podešavanje donje šine Lhsdpeyuql Sefx Al Njf Prilog za konusno valjanje Tehnički podaci su prema informacijama proizvođača, odnosno operatera, i za nas su nezvanični. Zadržavamo pravo međuprodaje; primenjuju se isključivo naši opšti uslovi poslovanja i prodaje. O nama više od 400 mašina na lageru preko 15.000 m² skladišnog prostora, kapacitet krana 70 t više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite da prodate mašine, proizvodne linije ili vaše preduzeće, obratite nam se. Ostale ponude možete pronaći na našem sajtu. Pregledi su mogući po dogovoru. Radujemo se vašoj poseti. Vaš Markus Hirsch tim

Stanje: dober (rabljeno), Leto izdelave: 2018, TwenTower – Drawer Rack for Sheets up to 3m x 1.5m, storemaster – used: Lhodjyzcwnjpfx Al Nsf Price ex location: €17,500 (net), including loading Manufacturer: storemaster Type / System: TwenTower SL 19 Year of manufacture: 2018 Heavy-duty drawer storage system for warehousing of large-format, wood-free sheet metal packs For sheet formats up to: 3,000 x 1,500 mm (usable drawer area) Allows manual removal of individual sheets, or via vacuum crossbeam or magnet 19 drawers with 50 mm usable height each Max. load per drawer: 1,750 kg (evenly distributed load) >100% drawer extension Top gripping height approx. 2,100 mm Max. load per head level: 3.0 t (evenly distributed) Max. load per rack block: 50,000 kg (evenly distributed) System height: 2,380 mm Single-sided drawer extension Swing-in side walls on drawers Standard loading in packs by overhead crane or forklift traverse, or sheet by sheet using vacuum traverse or magnet Delivered ready for operation, block-assembled As per manufacturer data for SL 20: Shelf pitch: 100 mm System width: 3,750 mm System depth open: 3,550 mm System depth closed: 2,050 mm System weight: 6,795 kg List price approx. €45,000 (net) Condition: good Availability: immediately Location: 27753 Delmenhorst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna dolžina: 1.100 mm, skupna širina: 1.320 mm, skupna višina: 1.050 mm, vhodna frekvenca: 50 Hz, Stroj za čiščenje pekačev KD-Putz Tubur Premium Stroj za čiščenje pekačev Za pekače / perforirane pekače Kratka stran dvignjena Izvedba iz nerjavečega jekla Z oljenjem in vozičkom za pekače Priključek 400V, vtič 16A-CEE Lodpfx Alsyv U Nfs Njhf Mere: 1320 x 1100 x 1050 mm (ŠxGxV) Rabljeni stroj iz pekarne

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: trifazni, Stroj za čiščenje pladnjev Jeros 5015/828 za pladnje z 2 robovoma krajša stranica dvignjena izvedba iz nerjavečega jekla z oljnim podmazi preizkušeno po DGUV V3 samo pri nas priključek 400V, 16A CEE vtič rabljeni stroj Lodeyaklcspfx Al Nshf Vabljeni k obisku!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, NOUVEAU NOUVEAU Machine de nettoyage de tôles à 3 & 4 bords NOUVEAU NOUVEAU Utilisation par une seule personne Construction en acier inoxydable, mobile taille maximale des tôles : jusqu’à 600 x 800 mm Bac de récupération coulissant en dessous Dimensions : 2234 x 630 x 1372 mm (L x l x h) La polyvalence du nettoyeur de plateaux/de tôles se démontre aussi par sa capacité à traiter même des plateaux à 4 bords avec une hauteur de rebord jusqu’à 24 mm. Les impuretés s’accumulent sous la machine sur une étagère coulissante, facile à vider. L’équipement est totalement mobile et peut être aisément déplacé là où on le souhaite en fin de poste. Toute la structure est grenaillée, rendant les surfaces aussi lisses et hygiéniques que possible. Raccordement : 400V, 1 kW, fiche CEE 16A Poids : 205 kg Machine neuve Avec garantie + service de pièces détachées Qualité d’un spécialiste ! Profitez de plus de 35 ans d’expérience ! Option : - Nettoyage des tôles jusqu’à 600 x 1000 mm - Graissage/huilage des tôles - Pack service - Service de livraison Lhsdpjw S Slnjfx Al Nsf - Mise en service & initiation Venez nous rendre visite !

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, nosilnost: 500 kg, Sponka za peno Težišče tovora: 1000 ISO razred: ISO razred 2 = 1.000 - 2.500 kg Stanje: Pripravljeno za uporabo in popolnoma funkcionalno Ledpfx Aoyz E Sbel Nehf Tehnično stanje: dobro Opis: Leto 2019 ISO 2A (41 cm) Nosilnost 500 kg / 1000 mm Obseg odprtja 800-2500 mm Stranski pomik Širina 1350 mm Sponke 1500 mm ID OS1973

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.100 mm, skupna širina: 1.400 mm, skupna višina: 1.800 mm, skupna masa: 2.300 kg, nazivna moč: 23,5 kW (31,95 KM), 12 mesecev garancije, 1800 delovnih ur Lodpfxjyw Hhvj Al Njhf

Stanje: rabljeno, for sheet thickness up to: 7 mm blade length: 175 mm round material up to: 20 mm Lsdpfjdp U Apex Al Njhf square material up to: 18 mm space requirement: 1000 x 770 x 690 mm manually operated

Stanje: rabljeno, Crimping tool for pressing tubular cable lugs and connectors Lsdpfx Alocabzrj Nehf with interchangeable dies for processing range 10 - 120 mm² available die inserts: 10, 35, and 70 mm² total length: 660 mm weight: 4.1 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, nosilnost: 1.680 kg, Objemka za sode ISO razred: ISO razred 3 = 2.500 - 4.999 kg Lhsdpfxoyzvlxs Al Nsf Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Opis: Objemka za pivske sode Letnik 2020 ISO 3A (51 cm) Nosilnost 1680 kg Širina 1040 mm Vilice 1150 mm ID OS1943

Stanje: novo, Bending length: 2100 mm Sheet thickness: 6 mm Upper roll diameter: 170 mm Lodpfx Aod Ab Npol Nshf Technical data: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electromotors and planetary gears in the gearbox - Portable control console - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 87.524 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9312, vrsta vhodnega toka: Klimatska naprava, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna masa: 23.000 kg, skupna dolžina: 8.000 mm, skupna višina: 2.400 mm, skupna širina: 8.000 mm, potovalna razdalja osi X: 3.080 mm, pomik osi Y: 1.740 mm, pomik po osi Z: 300 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 840D, moč: 3 kW (4,08 KM), delovna širina: 1.500 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 63 A, teža obdelovanca (maks.): 230 kg, priključek za stisnjen zrak: 6 letvica, hitrost rezanja: 300 mm/min, hitrost pomika os X: 300 m/min, hitrost podajanja osi Y: 300 m/min, hitrost podajanja os Z: 300 m/min, laserska moč: 3.000 W, valovna dolžina laserja: 10.600 nm, natančnost pozicioniranja: 0,01 mm, hitrost pozicioniranja: 3.000 m/min, natančnost ponavljanja: 0,01 mm, dolžina mize: 3.080 mm, širina mize: 1.740 mm, vrsta hlajenja: voda, delovna dolžina: 3.000 mm, leto zadnje generalne obnove: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, maks. debelina pločevine iz nerjavečega jekla: 8 mm, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Trumpf, vrsta aktuacije: električni, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Potopite se v svet visokoprecizne obdelave kovin s TRUMPF kombiniranim strojem za prebijanje in lasersko rezanje Trumatic 600L. S impresivno močjo 3 kW in delovno površino 3080 mm x 1740 mm boste kos tudi najzahtevnejšim nalogam. Stroj, izdelan leta 2000 v Nemčiji, odlikujeta robustnost in zanesljivost, maksimalna debelina pločevine je 8 mm, hitrost pa do 300 m/min. Hidravlični tlak 22 bar omogoča natančne rezultate prebijanja. Z obsežno dodatno opremo in intuitivnim CNC krmiljenjem ste odlično pripravljeni na vsak izziv. Lhodoym Rwrjpfx Al Nsf

Stanje: rabljeno, Leto izdelave: 1989, Tehnične podrobnosti: Lhsdpfx Ajyvfy Tsl Nof Širina pločevine: 1600 mm Debelina pločevine: 20 mm Najmanjša debelina pločevine: 6 mm Število ravnalnih valjev: 11 Premer ravnalnih valjev: 180 mm Ravnalna hitrost: 10 m/min Priključna moč: 76 kW Skupna poraba moči: 75 kW Teža stroja pribl.: 39,2 t Stroj za ravnanje hladne pločevine UBR 20x1600

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki Delovna širina: 2540 mm Maksimalna debelina pločevine: 2,5 mm Maksimalni kot upogibanja: 135° Dolžina: 2880 mm Širina: 1020 mm Lhsdpfx Asytparjl Nef Višina: 1450 mm Teža: 1300 kg