Okk Mch-800 nakup rabljenega (9.106)

Stanje: rabljeno, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control Serial no. 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently rarely used in the workshop of an electronics company. Travels: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Bledpfev Amryox Altok Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02 - 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm cross travel - Rotary table with direct division 72 x 5° and indirect division via indexing disc 1:120 = 1 rev. = 3° - Swiveling operator panel - Central lubrication - Operating manual - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required floor space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Total weight 4250 kg (measured) In very good condition

Stanje: dober (rabljeno), Delovna miza, montažna miza, miza za orodje, mizna delovna plošča, lesena delovna miza, aluminijasta delovna miza -Delovna miza: delovna miza z predali / robustna izvedba, nastavljiva po višini -Širina: 2000 mm -Globina: 800 mm -Višina: 830 mm, nastavljiva, glejte fotografije Bedpfjzrli Esx Altslk -Teža: 74 kg

Stanje: dober (rabljeno), Delovna miza, montažna miza, lesena delovna miza, aluminijasta delovna miza Bsdszrlirspfx Altslk -Delovna miza: delovna miza z predali / masivna izvedba, višina nastavljiva -Širina: 2000 mm -Globina: 800 mm -Višina: 760 mm, nastavljiva, glejte fotografije -Teža: 74 kg

Stanje: rabljeno, HERBOLD PU800 fine grinding mills Suitable for soft to medium-hard materials Bedezmddwjpfx Altelk Previously used for fine grinding plastics Grinding disc diameter: 800 mm Drive motor: 90 kW

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: nepreverjeno, številka stroja/vozila: 17659, skupna dolžina: 11.000 mm, skupna širina: 3.000 mm, skupna višina: 2.600 mm, skupna masa: 40.000 kg, Vključno z opremo za manipulacijo, perifernimi napravami in transportnim trakom. Prodaja se rabljena naprava, ki je bila odstranjena iz obratovalnega prostora. Bsdpfx Alezrd Sljtjlk Prodaja poteka z izključitvijo kakršne koli odgovornosti za stvarne napake. Naprava ni bila pregledana, vendar je bila do konca uporabna.

Stanje: zelo dobro (rabljeno), Catalogue Number 7641 Bedezh Iwdspfx Altelk TECHNICAL SPECIFICATION - Max. planing width: 800 mm - Max. planing height: 200 mm From above: - Powered, toothed infeed roller - Pawls - Pressure unit - 2 powered, toothed feed rollers - Pressure unit - 800 mm, 4-knife planing shaft – 7.5 kW - Pressure units - 800 mm, 4-knife profiling shaft (equipped with 3 straight knives, 1 profiling knife) - Pressure unit - Smooth, powered outfeed roller From below: - Guide rail - Infeed table - Smooth feed roller - 800 mm, 4-knife planing shaft – 7.5 kW - 2 smooth feed rollers - Split, smooth sliding roller - Lateral pressure at outfeed From the rear: 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles are alternately positioned - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle 350 mm, adjustable up/down + right/left – 5.5 kW - Spindle diameter: 40 mm At outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3 × 180 mm, 130 mm - Dimensions (L×W×H): 3100 × 2000 × 1900 mm - Weight: approx. 3500 kg ADVANTAGES – Top-performing wide planing machine for wet and dry wood – Perfect for beams, flooring, etc. – 3 planing shafts + 3 spindles – Made by KUPFERMUHLE – German manufacture – Used planer, in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR rate) (Prices may vary depending on currency fluctuations)

Stanje: rabljeno, Gate fold plates (window fold plates) / Gateway buckles MBO 76 - 79 - 530 - 800XX124 - Gate fold plates (window fold plates) with control unit / Gateway buckles with control box for MBO KT76 XX047 - Gate fold plates (window fold plates) with control unit / Gate Online video inspection via Skype video Blodpergbzwofx Altsk We would be very pleased to welcome you—more machines in stock Available immediately – Can be inspected In stock in Emskirchen / Nuremberg – Can be tested

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 15005225, Automatic Banding Machine HIMA BA 30/800 Year of Manufacture: 10/2004 - Serial No. 15005.225 Suitable for coated kraft paper or plastic film Technical specifications: - Output: up to 23 cycles per minute - Width of banded product: 30 - 310 mm - Stack height: 3 - 200 mm - Band width: 30 mm Triggering of cycle: – Manual / Start button Bledpfx Alon Aw Ucotsk – Foot actuator – Automatic mode button Online video inspection possible via Skype We would be pleased to welcome your visit – more machines available in stock Available immediately – Inspection possible Located in Emskirchen / Nuremberg – Testing possible on site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Mounting platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Shot volume: 7300 cm³ Shot weight (PS): 6640 g Maximum injection pressure: 1300 bar Screw length: 20 L/D Electrical and Hydraulic Equipment Pump drive rated power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System (ESS) The machine can be equipped with a modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor operation via a frequency inverter, adjusting the motor speed to the current requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in plastics processing industry - Reduced energy losses during idle Bedpfx Aljyugctjtjlk - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Suitable for retrofitting existing hydraulic injection moulding machines The ESS system significantly lowers machine operating costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Brizgalka: Krauss Maffei KM 800-5000 MC Leto izdelave: 2001 Število delovnih ur: 70.000 h Konfiguracija: Stroj z robotom, varnostno ograjo in transportnim trakom Razpoložljivost: Na voljo dve enaki napravi Sistem zapiranja: Sila zapiranja: 8.000 kN Največja sila odpiranja orodja: 356 kN Sila pomika gibljive odpirajoče plošče: 98 kN Sila pomika gibljive zapirajoče plošče: 92 kN Dimenzije plošče orodja (V x Š): 1.610 mm x 1.530 mm Razdalja med vodili (V x Š): 1.120 mm x 1.000 mm Hod odpiranja orodja: 1.400 mm Minimalna višina orodja: 600 mm Blsdjxqh I Iepfx Altek Največje odprtje orodja: 2.000 mm Hod hidravličnega izmetalca: 250 mm Brizgalna enota: Premer polža: 90 mm Razmerje L/D: 23 Tlak brizganja: 1.742 bar Prostornina brizganja: 2.863 cm³ Masa brizganja (PS): 2.605 g Dimenzije in teža: Dimenzije stroja (D x Š x V): 10,5 x 2,86 x 2,89 m Teža: 43 ton

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Brizgalni stroj Krauss Maffei KM 800-5000 MC Leto proizvodnje: 2001 Oprema: robot Tehnični podatki: Zapiralna sila: 8 000 kN Največja sila odpiranja orodja: 356 kN Sila pomika gibljive plošče (odpiranje): 98 kN Sila gibljive plošče (zapiranje): 92 kN Velikost plošč (š × v): 1 610 × 1 530 mm Razmak stebrov (š × v): 1 120 × 1 000 mm Hod odpiranja orodja: 1 400 mm Minimalna višina orodja: 600 mm Maksimalno odprtje: 2 000 mm Hod hidravličnega izmetalca: 250 mm Premer polža: 90 mm Bjdpfezd Ta Nsx Altolk Razmerje L/D: 23 Tlak vbrizgavanja: 1 742 bar Prostornina vbrizga: 2 863 cm³ Masa vbrizga (PS): 2 605 g Splošni podatki o stroju Dimenzije (d × š × v): 10 500 × 2 860 × 2 890 mm Teža: 43 000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 850 mm, premer struženja nad prečnim suportom: 410 mm, premer struženja: 410 mm, moč vretenovega motorja: 28.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 76 mm, potovalna razdalja osi X: 300 mm, pomik po osi Z: 850 mm, hitro pomikanje X-os: 30 m/min, premer vretena: 315 mm, CNC Siemens 840D DELOVNA POVRŠINA: Največji premer obdelovanca pri vrtanju: 700 mm Največji premer obdelovanca pri struženju: 410 mm Hod v osi X: 300 mm Hod v osi Z: 850 mm VRETENO: Dolžina konusa vretena: 170h5 mm Premer vretena za vstavljanje materiala: 76 mm Premer vretena za objem: 315 mm Moč (40 / 100 % ED): 28 / 20 kW Največji navor (40 / 100 % ED): 315 / 225 Nm Največje število vrtljajev: 5.000 vrt/min Število vrtljajev pri rezanju: 900 vrt/min NAPREDKI: Hitri pomik v osi X: 30 m/min Hitri pomik v osi Z: 30 m/min Natančnost delitve: 0,025° REVOLVERNA GLAVA ZA ORODJA: Število motoriziranih postaj za orodja: 12 Premer vpenjalnih vreten VDI 40 DIN 69880: 40 mm Moč (40 % ED): 12 kW Največji navor (40 % ED): 36 Nm Največje število vrtljajev: 4.000 vrt/min PODPORNO VRETENO: Hod podpornega vretena z avtomatskim pomikom: 800 mm Nosilec podpornega vretena: MK 5 Največja sila podpornega vretena: 800 daN Teža stroja: 6.100 kg Stroj opremljen z: Blodpfjzqanaox Altsk • Sistem za prednastavitev orodja • Komplet fiksnih vpenjal za orodja • 1 aksialno motorizirano vpenjalo za orodja • 1 radialno motorizirano vpenjalo za orodja • Samocentrirno vpenjalo Autoblok, premer 315 mm • Navodila za uporabo in vzdrževanje ter izjava o skladnosti CE

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, skupna višina: 680 mm, skupna širina: 340 mm, skupna dolžina: 680 mm, vhodna napetost: 230 V, skupna masa: 38 kg, vrsta hlajenja: zrak, električna varovalka: 16 A, laserska moč: 800 W, dolžina gredi: 1.080 mm, neprekinjena moč: 800 kW (1.087,70 KM), Oprema: dokumentacija / priročnik, zaščita za glavo, Operation - Simplest operation via synergic characteristic curves - Three steps to achieve a finished weld result. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. Integrated help function provides better understanding of the adjustment options - Fully integrated operation in the wire feed unit – control options via the main machine or the wire feed unit Technical Specifications - 20µm single-mode laser source - High-performance laser cells combined with gas-cooled torches ensure maximum power and focus stability. - 2-in-1 machine: welding and cleaning. Laser cleaning is perfect for paint removal, derusting, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency-off system - Dual-channel safety interface for access control (door contact switches) - Key switch prevents unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety instructions and manual laser release activation required for each start - Dual push-button activation prevents unintended laser engagement - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Minimal distortion, incredibly fast, exceptionally high quality (even for very thin materials < 1 mm) - Consumes approx. 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced post-processing - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Bedpfxoyuvqmo Altjlk Advantages of the Craft Laser - Laser cleaning with up to 100 mm scan width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more sending in for servicing needed

Stanje: novo, Leto izdelave: 2026, V prodaji imamo visokokakovostne obremenitvene klopi iz naše serijske proizvodnje z naslednjimi tehničnimi podatki: Stanje: NOVO Področja uporabe: - Obremenitveno testiranje rezervnih generatorjev in naprav za zamenjavo omrežja - Stabilizacija omrežja z odvzemom toka - Preizkuševalne mize za motorje Tehnične lastnosti: - Tip bremena: Ohmska upornost - Napetost: 400 V, na voljo tudi do 800 V - Frekvenca: 50/60 Hz - Faktor moči: 1 - Moč: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Obremenitvene stopnje mogoče poljubno izbirati prek kombinacij tipk - Izpis testnega poročila - Avtomatizacija testiranja, samodejni priklop obremenitvenih stopenj Upravljanje in nadzor: - Neposredno prek tipkovnice na obremenitveni klopi - Prek daljinske enote (touch-panel) Bljdpjfm T Euofx Altok - Prek breznapetostnih kontaktov - Opcijsko na voljo prek Modbus za integracijo v avtomatizacijo testiranja Dodatne lastnosti: - Zaklepna vrata/preklopne lopute za zaščito pred prahom med skladiščenjem - Kompaktna izvedba - Majhna teža - Prenosna - Robustna zasnova s kontejnerskim okvirjem - Čepi za viličarja in priprava za dvig s kranom Vključno z električno shemo Vključno z navodili za uporabo Vključno s programsko opremo Dostava in zagon na zahtevo proti doplačilu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, General Tool Magazine: 2x chain-type magazines with 32 stations each Rapid Traverse X/Y/Z: 48 m/min Travel Range X/Y/Z: 800/900/620 mm Spindle Technology: Direct drive Speed: 15,000 rpm Bledpfeur Ng Ujx Altjk Tool Holder: HSK-A63 NC Rotary Table Technology: Swivel rotary table with torque drive, manufacturer Kessler A axis: +/- 120° C axis: 360° Clamping Surface: ø800 mm Table Load (max.): 1,000 kg Workpiece Dimensions (max.): ø800 x 500 mm Equipment Position Measuring System: Direct (glass scales) on all axes Chip Management: Chip conveyor Coolant Management: Through-spindle coolant system with filter and high pressure, 18 bar Workpiece Measurement: Probe, Heidenhain TS 740 Tool Measurement: Laser, BLUM Setup Mode: Electronic handwheel Additional Equipment: Spindle chiller

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 79.008 h, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 2.000 g, minimalna višina orodja: 250 mm, dolžina plošče: 795 mm, višina plošče: 795 mm, skupna dolžina: 6.000 mm, skupna širina: 2.000 mm, skupna masa: 10.950 kg, Arburg 570A-2000-170, dvokomponentni hibridni stroj za brizgano oblikovanje s preklopno loputo za sortiranje (243) z preklopno loputo za sortiranje Številka: 243 Razpoložljivost: na zalogi Leto proizvodnje: 2010 Proizvajalec: Arburg Bljdpfszq A S Iex Altsk Stanje stroja za brizgano oblikovanje: rabljeno Premer vijačnega valja [mm]: 50 // 35 Injekcijska teža [g]: 359 // 105 Injekcijski tlak [bar]: 2000 // 1470 Zaključna sila [kN]: 2000 Razmik med ploščami [mm]: 570 x 570 Velikost plošče [mm]: 795 x 795 Minimalna višina matrice [mm]: 250-550 Vrsta upravljanja: Selogica Jezik: angleščina, nemščina Delovni čas [h]: 79008 Teža [kg]: 10.950 Dimenzije [mm]: 6000 x 2000 Lijak za polnjenje: NE Zračni ventil: x5 Veriga za označevanje jedra: 1x

Stanje: rabljeno, Leto izdelave: 2001, Demag Ergotech-koncept 800/420-310 (2001) Bljdpfx Aeyyzqweltsk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm OFFER We can offer you, subject to prior sale and errors excepted, ex stock, without obligation: HERMLE 5-Axis Universal Machining Center in gantry design with tilting rotary table Model: C 800 U Year of manufacture: 1998 No. 12648 _____ Travel, longitudinal X-axis: 800 mm Travel, transverse Y-axis: 600 mm Travel, vertical Z-axis: 500 mm NC tilting axis, A-axis: -20 / +90 ° NC rotary table, C-axis: 360,000 ° Maximum vertical spindle overhang: approx. 600 mm Max installation height under spindle: approx. 100 / 600 mm Table size (swing circle Ø 630 mm): 540 x 540 mm Max table workpiece weight: approx. 300 kg Spindle taper: SK 40 Vertical spindle speeds, infinitely variable: 18,000 rpm Feed rates/rapid traverse, stepless: 2 – 35,000 mm/min Feed force: approx. 11/16 Nm Spindle drive: 15 kW Total power: approx. 37 kW – 400 V – 50 Hz Weight: approx. 8,000 kg Accessories / Special Equipment: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are located outside the working area. • Machine bed made of mineral cast with high damping properties, foundation-free installation, excellent static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces, including electronic handwheel. • NC tilting rotary table (C-axis 360,000° / B-axis -20/+90°), Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm, with automatic pivot nozzle block • Tool changer with extended (additional) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extractor with filter, full enclosure Bljdpfjx Dndcsx Altjk • Comprehensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – machine under power, ready for demonstration A video of the machine will be available here shortly (please click on the link): Delivery: ex stock – available immediately, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, before delivery of the machine.

Stanje: rabljeno, Leto izdelave: 1999, X travel 800 mm Y travel 630 mm Z travel 560 mm Total power requirement 60 kW Machine weight approx. 12.5 t Space requirement approx. ... m H E L L E R CNC-controlled horizontal 5-side machining center Model: FST-MC 160/800 / E Year of manufacture: 1999 – Only approx. 500 hours in operation --- Working range: Longitudinal travel X-axis 800 mm Vertical travel Y-axis 630 mm Cross travel Z-axis 560 mm NC rotary table - tilting A-axis 180.000° Rotary B-axis 360.000° Max. workpiece size approx. 450 x 450 x 340 mm (larger dimensions possible with restrictions) Pallet size approx. 450 x 620 mm Tool interface HSK 63A Spindle speeds, stepless 63 - 20,000 rpm Feed/rapid traverse XYZ 1 - 70,000 mm/min Spindle drive power 24 kW Total power load approx. 60 kW – 400 V – 50 Hz Weight approx. 12,500 kg Accessories / Special Equipment: Bedpst Hwrhefx Altelk • 5-axis CNC path control SIEMENS SINUMERIK 840 D for true 5-side machining • Workpiece handling system: workpiece is mounted on a pallet outside the machine and is fed via a roller conveyor into a lifting/rotating device, which then positions the pallet onto the rotary/tilt table for automatic clamping and machining. • 40-slot tool magazine with tool loading station, laser tool breakage control • Internal coolant supply HD-50 bar • Advanced coolant treatment system with filtration and temperature control • Oil mist extraction • Separate chiller for motor spindle and electrical cabinet • CO₂ fire extinguishing system • Chip conveyor and complete enclosure • Spacious operator platform for personnel and monitoring, height 600 mm Price ex stock, plus VAT: €89,000 The machine comes from the development department of a vehicle manufacturer and was used only for testing purposes. The original purchase price was around 1.3 million DM. This is a rare opportunity for medium batch production. Particularly well suited for aluminium machining. H E L L E R (Germany) 5-Axis CNC Controlled Horizontal Machining Centre Model FST-MC 160/800/E Year: 1999 Only approx. 500 hours in operation. [Text cuts off for accessories description]

Stanje: rabljeno, Leto izdelave: 1974, Table diameter mm Workpiece height mm Number of wheels 2 Total power required 8 kW Machine weight approx. 4.2 t Space required approx. m O F F E R We can offer you, subject to prior sale and errors excepted, ex stock on a non-binding basis: HAHN & KOLB Double-sided lapping and fine grinding machine Model ZL 800 H Year approx. 1974 240 024 _____ Possible lapping/grinding wheel diameter 755 - 810 mm Possible ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. workpiece transport wheel Ø approx. 306 mm Max. distance between cast lapping plates 125 mm Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Lapping wheel speeds upper 30 / 42 / 60 / 84 rpm Lapping wheel speeds lower 30 / 42 / 60 / 84 rpm Workpiece transport wheel centre drive 28 / 40 / 56 / 80 rpm Each spindle drive 6 / 8 kW Total drive approx. 11 kW – 380 V – 50 Hz Weight approx. 4,200 kg Special equipment / accessories: • HAHN & KOLB / LAUER measuring and control device with sensor guided through the hollow spindle. The sensor continuously measures during the process and automatically ends the cycle when the set thickness is reached. • Pressure stage adjustment via HELLER hydraulics, and grinding phase adjustment by timer. • Currently equipped with fine grinding wheels for double-sided high-precision fine grinding of flat-parallel workpieces. • Laterally mounted, height-adjustable and swiveling motor-driven dressing unit with electromotive feed. • Lapping/sluicing agent dosing unit with container. Bjdeub Alzopfx Altolk • Wide range of drive and pressure settings such as: concurrent/counter rotation, single drive, co-rotation of one or both wheels, left/right rotation, etc. • Motor-driven height-adjustable planetary drive for the transport wheels. Condition: Not yet commissioned, special price possible for "as is" purchase. Delivery: Ex stock, immediately, FCA Metzingen. Payment: strictly net - due upon receipt of invoice. We have further double-sided lapping and fine grinding machines in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 2001, Roller diameter: 680 mm Bandsaw blade length: 8,550 mm Max. blade thickness: 1.3 mm Cutting height: mm Motor power: 20 kW Table size: 600 x 620 mm Feed speed: m/min Machine height: mm Weight: 10,000 kg MEYER & BURGER (Switzerland) Hydraulic, fully automatic band saw for cutting large blocks of hard and brittle materials such as silicon (solar industry), quartz glass, ceramic materials, etc. Type: BS 800 Year of construction: approx. 2001 _____ Cutting area: round max. approx. 680 mm square max. 680 x 680 x 400 mm Max. workpiece weight: approx. 500 kg Section length min/max: stfl. mm Bandsaw dimensions L x W: approx. 8,550 x 40-100 mm Blade thickness: approx. 0.5 – 1.3 mm 2 flywheels with diameter x width: 1200 x 100 mm Wheelbase of flywheels: approx. 2,400 mm Cutting speed steplessly adjustable: 0 – 50 m/sec Flywheel speed: 300 – 800 rpm X-axis = programmable workpiece traverse: 0.001 - 800 mm Z-axis = cutting feed / stroke max.: 500 mm Cutting feed / rapid traverse programmable: 0 – 100/1,000 mm Table diameter: 500 mm Table rotatable to (angle setting 0.001°): max. 90° Saw blade drive: approx. 13 kW Total drive: approx. 20 kW - 380 V –50 Hz Weight: approx. 10,000 kg Accessories / Special features: The machine allows blocks to be cut into slabs or, using the rotary table, into cuboids or prisms. Due to the band sawing process/diamond tool, minimal kerf loss as well as high accuracy and surface finish are achieved. The cutting movement is from bottom to top; material feed is from front to back. • Controlled via SIEMENS PLC "Simatic S7" with visualization via OP 27, infinitely variable drives and axis positioning. • Automatic blade tensioning and band lead adjustment • Fitted rotary table with magnetic plate approx. 600 x 620 mm, tiltable. • Fully stainless steel enclosure with surrounding walkway, separate control cabinet, separate hydraulic unit and coolant system. Condition: Good to very good – soon ready for demonstration – very rare machine Delivery: ex stock – as inspected Bledpfx Aot Hw Uieltsk Payment: net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, X-pomik 800 mm Y-pomik 600 mm Z-pomik 500 mm Bljdey Tyznepfx Altjk Opis sledi!

Stanje: rabljeno, Leto izdelave: 1975, Table diameter mm Workpiece height mm Number of wheels 2 Total connected load 11 kW Machine weight approx. 4.2 t Required space approx. m O F F E R We can offer you, ex stock and subject to prior sale and error, without obligation: HAHN & KOLB double-sided lapping and fine grinding machine Type ZL 800 H Year of manufacture approx. 1975 240 049 _____ Possible lapping/grinding wheel Ø 755 - 810 mm Possible wheel ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. transportation carrier wheel Ø approx. 306 mm Max. distance between cast lapping wheels 125 mm Bedpfeub Al Iex Altelk Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Lapping wheel speed upper 30 / 42 / 60 / 84 rpm Lapping wheel speed lower 30 / 42 / 60 / 84 rpm Workpiece carrier wheel central drive 28 / 40 / 56 / 80 rpm Spindle drive each 6 / 8 kW Total drive approx. 11 kW - 380 V - 50 Hz Weight approx. 4,200 kg Special equipment / accessories: • HAHN & KOLB / LAUER measuring and control device with sensor routed through the hollow spindle. The sensor continuously measures during operation and automatically ends the cycle when the target thickness is reached. • Pressure stage adjustment via HELLER hydraulics and grinding phase adjustment via timer possible. • Currently fitted with fine grinding wheels for double-sided high-precision fine grinding of flat-parallel workpieces. • Side-mounted, height-adjustable and swiveling motorized dressing device with electric feed. • Lapping or rinsing agent dosing device with container • Multiple drive and pressure setting options such as: co-rotating / counter-rotating, individual drive, dragging one or both wheels, left/right rotation, etc. • Electrically height-adjustable planetary drive device for the carrier wheels Condition : mild noises in lower gearbox, otherwise in good condition Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – payable upon receipt of invoice We have further double-sided lapping and fine grinding machines in stock, please contact us.

Stanje: rabljeno, Leto izdelave: 2008, Transnorm Belt Curve Conveyor Belt Curve 90°-800-700 IR900 Right-hand RA2080 Technical Data: Manufacturer: Transnorm Condition: Good (used) Conveying angle: 90° Nominal/External width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA37/T DT71D4/TH Electrical data: 380-500 V, 0.37 kW Conveying speed: 1st gear 0.67 m/s, 2nd gear 0.25 m/s, 1st gear 0.33 m/s, or 1st gear 0.83 m/s Scope of delivery: without supports (available on request) Optional: Blsdpfxjn Tpvgj Altjk Supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation please feel free to contact us. Contact us by phone or email. We would be pleased to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 1999, Transnorm Belt Conveyor 800-600-500 RA1986 The Transnorm belt conveyor is from 1999 and remains in good (used) condition. It is perfectly suited as a feed conveyor and features a Van der Graaf brand motor. Supports are not included in the scope of delivery; these are available as optional accessories. Technical Data: Manufacturer: Transnorm Model: TS 1100 Belt Conveyor Year of manufacture: 1999 Blsdsk Abquspfx Altsk Condition: good (used) Motor: fully operational Conveying length (FL): 800 mm Nominal/outer width (NB): 600 mm Belt width (GB): 500 mm Overall height (BH): 80 mm Motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: 0.55 kW, 230/400 V, 50Hz Conveying speed: 2.8 m/s Weight: 60 kg Scope of delivery: without supports (available upon request) Optional: supports We can also extend the conveyor to your required specifications. Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, please do not hesitate to contact us. Simply get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.