Naprava Za Vroče Teke nakup rabljenega (85.617)

Stanje: pripravljen za uporabo (rabljen), Na prodaj: puhalo Aerzen GM150S. Itedsy Rhytspfx Ab Ajg

Stanje: zelo dobro (rabljeno), Prodajam profesionalno napravo za nastavitev batnih merilcev SUBITO – Schwenk ESU. Zelo dobro ohranjena, komplet v originalnem lesenem kovčku z navodili. • Model: SUBITO Einstellgerät ESU • Proizvajalec: Oskar Schwenk GmbH, Nemčija • Popolna oprema • Stabilno litoželezno ogrodje • Natančna nastavitev in mikrometrično pomikanje • Idealno za nastavitev batnih merilcev SUBITO, ESS, ESU • Vse skupaj kot novo. Isdpfxsx A Ia Io Ab Aetg

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum Isdpfxeym Unzs Ab Aotg - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Itodpfx Absxn Ax As Asg Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Readout system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English • Supplied with original documentation and complete set of connectors Condition: • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: zelo dobro (rabljeno), Device for precise setting, measurement, and inspection of CNC cutting tools. System equipped with EZset optical camera and EZvision software (Image Controller 1). In very good condition, complete, ready for operation. Itodpfx Absxn Awxo Aeg Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axis: up to 400 mm • Camera with image processing system • Tool edge, length, and diameter measuring functions • Data saving and printout capability • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture approx. 2018–2019 • Complete with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal / transverse axes reference properly • Well-maintained unit from a German tooling facility Functional description: PRECIsset 400 enables fast and repeatable setup of tools before CNC machining. The EZset vision system allows for blade geometry analysis and tool wear monitoring. High measurement accuracy is ensured by a stable column and industrial-grade optics.

Leto izdelave: 2018, stanje: rabljeno, sestavljen iz: pražilnega ciklona, transporta surove kave, ročnega upravljanja, gorilnika za dim Ijdpfey D Tyxox Ab Aetg

Stanje: rabljeno, Finiture lakirna linija za okna in vrata ----- Kratek opis: Poz. 1: 1x dvojna obešalna tirnica Poz. 2: 1x vrtljivi sklop za nosilce z eno sklopko Poz. 3: 1x "Superjet" potopna naprava Poz. 4: 1x visokotlačni vlažilec Poz. 5: 1x naprava za ločevanje odpadne vode Opcijsko: Iedoy D A Hhspfx Ab Astg Potopni kanal ali bazen (5–6 kadi) Podroben tehnični opis in načrt — glejte pripeto PDF datoteko! ----- Cena zgoraj navedene lakirne linije na povpraševanje! ----- (Tehnične navedbe po proizvajalcu – brez garancije!) Vse cene so brez DDV. DDV se obračuna posebej.

Stanje: rabljeno, Spremljevalni stroj za rezanje profilov za Dreistern P3.125 s priborom Smer proizvodnje: z leve proti desni Hod dolžine pomika: 2000 mm Aluminijasti voziček z valjčno-kroglastim vodilom Nastavitev višine preko hidravličnega valja in klinov Vpenjanje za nastavitev višine s ploščato vzmetjo, hidravlično sproščanje Nizko-zračna Graessnerova menjalna z Rexroth servomotorjem Zložljiva miza: Vodilo z valjčki Hidravlično zložljiva Isdpsy Sldfsfx Ab Aetg Valjčki vgrajeni v mizo Velikost 380 x 6200 mm Pribor: 7,5 kW hidravlična postaja s hladilnikom in tlačnim akumulatorjem Vodilo vhodnih valjčkov Indikacija lukenj (lochindex) Hidravlični ventili na vozičku Prebijalnik Rezkalna naprava Originalna dokumentacija Do demontaže pri odjemalcu stroj v proizvodnji v odličnem stanju. Krmilnika ni vključeno. Pri integraciji v obstoječo profilirno linijo vam lahko pomagamo z: Načrtovanjem Mehansko obnovo Izdelavo krmilnega sistema Barvanjem Varnostnim konceptom CE dokumentacijo

Stanje: dober (rabljeno), Naprava za obračanje posod, varilna obračalna naprava, valjčni podstavek, rotatorji, naprava za ravnanje cevi, valjčni obračalni podstavek - Valjčni podstavek: naprava za obračanje posod brez pogona, 2 kosa - Razmak med valji: 315 do 965 mm - Valji: na obeh straneh po 2 kosa Ø 250 x 140 mm - Nosilnost: kg Ijdpfx Asy R Nrqob Astg - Dimenzija: 890/440/H800 mm - Dobava/cena: komplet - Transportna dimenzija: 890/880/H800 mm - Teža: 506 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, The VARIO-L is an advanced, high-performance system designed for the cleaning and degreasing of metal parts. Whether for turned parts, stamped parts, tubes, bulk material, or sensitive single components – the system offers reliable and reproducible cleaning results for a wide range of applications. The use of innovative vacuum technology not only provides a significant improvement in cleaning quality, but also minimizes the consumption of solvents. This guarantees a high level of process reliability paired with increased cost efficiency. A unique selling point of the VARIO-L is the integrated front-top loading technology. This well-engineered system concept prevents almost any solvent leakage, thus ensuring maximum safety and environmental compatibility. Depending on the specific application, the system can operate with modified alcohol or hydrocarbons. Below you will find a structured overview of the system’s equipment and its versatile application possibilities. Itedpsy Nlmujfx Ab Asg System Equipment: - Fully cladded machine structure - Maintenance roller shutter - Rotating and swiveling device (up to 12 rpm) - Front-top loading (spill-proof) - 2 flooding supply tanks (heated) - Process filtration - Intensive vacuum drying - System distillation - Residual distillation - Explosion protection equipment - Loading table - Online access for remote maintenance Technical Data: • Usable solvents: modified alcohol (Class III) / hydrocarbon (Class III) • Basket size (LxWxH): 1 x 670 x 480 x 300 mm or 2 x 480 x 320 x 200 (300) mm • Maximum basket weight: 80 kg • Throughput: 5 batches per hour • Electrical connection: 70 kW • Energy requirement: 10 kWh • Compressed air: 6 bar • System dimensions (LxWxH): 4000 x 2000 x 3000 mm • System weight: 5000 kg • System cooling: water cooled (customer-side chilled water supply required) Alternatively, a chiller unit can be offered.

Stanje: dober (rabljeno), Naprava za obračanje rezervoarjev, naprava za obračanje kotlov, varilna obračalna miza, varilna naprava, varilna obračalna miza - Naprava za obračanje rezervoarjev: varilna obračalna miza na tirnem podvozju - Pogonski motor: - Nosilnost: 3500 kg - Razdalja med valji: 280 - 1230 mm - Valji: Ø 255 x 50 mm - Hitrost vrtenja: 0,0 do 0,75 m/min, desni/levi tek, levi tek - Krmilna enota: z ročnim upravljanjem in nožno stopalko - Posamezne komponente: glej fotografije Itedpfey Rtkdex Ab Aog - Transportne mere: 1205/2330/V1010 mm - Teža: 830 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Itodpfjxqxw Tjx Ab Ajg Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1 Iodpfx Abexqxt Ie Aotg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 4.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111549, potreba po zraku: 6 m³/h, obratovalni tlak: 6 letvica, skupna širina: 1.300 mm, vrsta vhodnega toka: trifazni, notranja dolžina: 8.000 mm, Stroj uporablja za peskanje jeklenih delov, dodatno opremljen z mokrim odpraševalnikom, kar omogoča tudi peskanje aluminijastih delov (dodatna namestitev proti doplačilu). - Leto izdelave: 2024 - Delovni čas stroja: 2000 h - Mrežni transporter iz mangana, širina 1000 mm - Nastavljiva hitrost tračnega transporterja Isdpfx Aewvgbgeb Aotg - 4 turbine moči 11 kW, tip Rutten Gamma 330 HD - Brezstopenjska regulacija vrtljajev turbin - Komora Hot Spot iz manganove in orodnega jekla - Samodejno zaznavanje delov - Samodejna regulacija pretoka abraziva - Samodejno dopolnjevanje abraziva - Samodejni odpih delov - Sistem odpraševanja Rosler BF 40/40 - Stroj omogoča delo z najtršimi GH ostrorobimi mediji - Lopatice turbine iz karbidne trdine zagotavljajo 30.000 h delovanja - Zaščitni pokrovi turbin iz karbidne trdine še dodatno zagotavljajo odpornost proti obrabi ohišja stroja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je stroj za polnjenje in zapiranje velikih pločevink JBT FoodTech iz živilske industrije. Teža pločevinke: 750g/1000g, vsebina: sladkano kondenzirano mleko, največja zmogljivost: 600 pločevink/min, polnilne glave: 22, zapiralne glave: 5, izvedba: monoblok, upravljanje: Siemens. Dokumentacija je na voljo. Možen ogled na lokaciji. Itsdpfoy N Uv Sox Ab Ajg

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 4422550994025, Ponudba 26088 Hidravlične škarje za profile in palice z izsekovalno napravo ter prebijalnim strojem Tehnični podatki: - Škarje za ploščato železo Itodpfx Aboy Nk Rlj Aeg - Ploščato železo: 400 x 16 mm - ali: 300 x 18 mm - Škarje za profile - L- in T-profil pri 90°: 130 x 12 mm - Kvadratno / okroglo železo: 40 / 40 mm - Izsekovalna naprava - s kvadratnim izsekovalcem za pločevine do pribl.: 13 mm - Globina izseka pribl.: 70 mm - Širina izseka pribl.: 52 mm - Prebijalni stroj - Prebijalna sila pribl.: 60 t - Razdalja do hrdla: 400 mm - Hod pribl.: 10 do 50 mm - Prebija v jeklo do: Ø 31 pri 15 mm - Električni kontaktni omejevalnik - Različne prebijalne utore in matrice - Pogon: 400 V / 5,5 kW - Potrebna postavitvena površina: Š 1100 x V 2000 x G 1700 mm - Teža pribl.: 2100 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, It is important to note that a total of two welding machines and two CNC corner cleaning machines are available, resulting in two complete production lines. The machines are operational and still in daily use. Itsdpfx Absyyavrs Aog CE conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Power connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components: - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control - Central control unit - Safety light curtain Operation: Profile clamping – inserting the heated welding plate – PVC melting – generating welding pressure – welding cooling – frame removal The system operates semi-automatically/automatically. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Control panel and industrial PC Control system: Industrial PC control Safety system: - Light curtain - Emergency stop button - Safety covers - CE conformity Still under power in Hungary, the system can be dismantled and delivered around June.

Stanje: zelo dobro (rabljeno), Ponujamo vam: Itsdpfew Ra Hqox Ab Ajg Orodje za vtiskovanje za ustvarjanje oblikovne zveze Proizvajalec: HWR Tip: SOLIDStamp Prikazani dodatki, orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: zelo dobro (rabljeno), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system, consisting of LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-suspended and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-power switching amplifier Industrial air-cooled version Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90% Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Itodpfjy Iwp Sox Ab Asg Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Volume: approx. 1700 liters Nominal voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Nominal current: 37.1 A Refrigerants: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip table 760 mm x 850 mm Threaded insert spacing 100 mm Activated licenses: Excitation types: Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Noise Soft-Clipping, Sine-on-Random PSD Limit Control, Shock Extensions: Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System powers up / control is active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories as per pictures Loading possible. Sale without warranty. Subject to prior sale and changes.

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Naprava za rezanje profilnih tirnic ALFRA PSG 5+ je letnik 2015 in ima hidravlični nastavek. S pomočjo dolžinskega omejevalnika je mogoče profile natančno in ponovljivo rezati na želeno dolžino. Na hidravlični nastavek je priključena elektrohidravlična črpalka ALFRA 120, ki je del ponudbe. Del kompleta je tudi delovna miza. Naprava je bila preverjena glede delovanja in ima opravljen elektro pregled, ki ga je izvedlo specializirano elektro podjetje. Ijdpfxsyyxp Re Ab Ajtg

Stanje: pripravljen za uporabo (rabljen), ASYST CNC-naprava za profiliranje in ravnanje Tip: APNC 400 Leto izdelave: 2003 Naprava je funkcionalna; kot rezervna ali za nadomestne dele Isdpoy Edc Tsfx Ab Ajtg

Stanje: rabljeno, prevoženi kilometri: 1 km, moč: 242 kW (329,03 KM), konfiguracija osi: 4x4, vrsta prenosa: samodejen, Leto izdelave: 2012, Gross vehicle weight (GVW): 24,000 kg Itedpsy Ivypjfx Ab Asg For further information, please contact Emal Jaweed. Atlas Copco SmartRoc C50-10SF, Year of construction: 2012, Operating hours: 14,261, Power (kW / hp): 242 / 329, Weight: 30,000 kg, Borehole diameter: 90–140 mm, Maximum drilling depth: 36 m, Air volume (FAD) at 12 bar: 223 l/s (approx. 472 cfm), Drilling method: COPROD technology combines top hammer drilling, Drill meter-controlled automation system, GPS/Hole Navigation System (HNS) for guided drilling, Dust collector, Automatic rod changer, Good condition, Air conditioning, Auxiliary heater, Central lubrication, Radio, Video available Miscellaneous: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing options available. * We are specialists in worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * For vehicle and used machinery sales, only the general terms and conditions (GTC) of Jaweed GmbH apply. * Further information and our full terms and conditions are available on our website.

Stanje: dober (rabljeno), Heidelberg GT 32×46 Stroj za vroče tiskanje folije Pregledan in pripravljen za proizvodnjo. Stroj je pripravljen za vroče tiskanje folije in izsekavanje. Format stroja: 32x46cm Pritisk: 60t Papirna teža: 600gsm Delovna hitrost: 4000 pol/uro Ta model je zasnovan za vroče tiskanje folije in ima veliko grelno ploščo. Teža: 2300kg Nosilec izdelal Hakro. Vključuje okvir, polnila in tipografske zapahe. Itsdpfx Aoy E Exvob Aeg

Stanje: dober (rabljeno), TWQ-720RD Avtomatski stroj za vroče folijsko tiskanje Ta stroj je popolnoma nov. Zelo hitra nastavitev. Zmožnost reliefnega in vročega tiskanja folije z dvema neodvisnima podajalnikoma folije. Servomotorski nadzor za hitro in natančno delovanje. Tehnične specifikacije: Maksimalna velikost lista: 720x600 mm Minimalna velikost lista: 150x120 mm Gramatura materiala: 120-2000 g/m² Maksimalna zmogljivost: 1200 listov/h Poraba moči: 13 kW + stisnjen zrak Teža: 2000 kg Podajanje folije: 1-550 mm Obratovalna temperatura: 50-150°C Itjdpfxsy E Exie Ab Asg Napajanje: 380V Približne dimenzije stroja: 270x160x220 cm Oprema: – Nadzorna plošča z zaslonom na dotik in PLC – Dva neodvisna podajalnika folije, upravljana s koračnimi motorji – Sekcijsko ogrevana plošča – Vgrajen kompresor

Stanje: novo, Leto izdelave: 2025, Advantages of pre-glued dowels: • No additional glue required when shooting in the dowel • No cleaning effort for the water supply system Advantages of the DübelJet: • Recoil-free gun • Easy handling • Mobile handheld device • Universal application range Technical data for the DübelJet: • Doweling system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) • Universal application range • Shooting in pre-glued dowels (with water) especially in furniture production Ijdewu Dnnepfx Ab Astg • Shooting in position dowels (without water) made from wood or plastic, for example in frame construction or in conjunction with screws or carcass connectors