Milkplan Mpp-5000 nakup rabljenega (2.520)

Stanje: pripravljen za uporabo (rabljen), Heidenhain ERN 120 5000 01-03 rotary encoder, part no.: 589 611-3C, serial number as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos Itjdpfx Aboi Eah Hoxeh

Stanje: novo, Heidenhain ERA 4800C 5000 R20 A3908 delilni boben, ID 533903-73, serijska številka po fotografiji, neuporabljen v originalni embalaži, 100% delujoč, obseg dobave po fotografijah Itodji Eahbspfx Abxjh

Stanje: novo, Heidenhain ROD 436 5000 27S12-03 . 376 836-39 SN 23898517B, nerabljen, 100% delujoč, dobava v skladu s fotografijami. Itodpjy Nqq Sefx Abxeh

Stanje: novo, GMN TSE 240 cg - Hitrost: 3000-3600-4000-5000 min-1 / 37 dodatno brusilno vreteno, premer osi: 130 mm, ramenski premer spredaj pri navoju: 102 mm, s preizkusnim protokolom in izjavo o vgradnji, nova vrednost: 25.000 €, neuporabljeno, 100 % funkcionalno, obseg dobave po fotografijah. POZOR: Stroške pakiranja in prevoza prosimo povprašajte posebej! Iodpfxsi D U Tre Abxsth

Stanje: novo, GMN TSE 240 cg - 5000 / 37 brusilno vreteno 384124, neuporabljeno, 100 % funkcionalno, obseg dobave kot na fotografijah POZOR: Stroške pakiranja in prevoza prosimo, povprašajte posebej! Itjdpfxoi Eaamj Abxeh

Stanje: novo, GMN TSE 240 cg - 5000 / 37 brusilno vreteno 384126, neuporabljeno, 100% delujoče, dobava v skladu s fotografijami POZOR: Stroške pakiranja in prevoza prosimo povprašajte posebej! Iedpfx Aei Eaaxjbxoth

Stanje: novo, Heidenhain ROD 426 5000 27S12-03 rotacijski dajalnik. 376 846-L1, serijska številka 74559410B – neuporabljen! Itsdpoy Nqqxjfx Abxjh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Ricoh IP5000 AD3/AD4 128m Itedpfswk Eiljx Abxsh Števec A: 100 mio Števec B: 80 mio Vključuje Hunkeler UW6 in RW6 tight web!! Hunkeler POPP6 Roll2Roll Slike so na voljo na zahtevo... Vsa omenjena oprema ni naprodaj/preprodaji v Rusiji ali kateri koli državi, ki je pod embargom EU.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 61.469 h, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, This TRUBEND Cell 5000 featuring a TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world’s first bending automation system with image recognition for maximum flexibility. It can process sheet metal parts up to 40 kg and is equipped with a 6-axis backgauge sensor system. Maximum repeat accuracy is assured thanks to angle sensors (ACB) in automated operation. The machine features a robust all-steel frame, electrohydraulic top drive, and a modern block hydraulic system. Control is provided by a TRUMPF TASC 6000 with 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending operations. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electrohydraulic top drive with 4-cylinder technology • Generous edge distances • Flat front covers • Modern block hydraulic system • Electronic pressure gauge • Measuring system with glass scale and spring compensation • Hydraulic oil inside the machine (lifetime lubrication) • Oil cooler • Electrical cabinet cooling with air-to-air heat exchanger • Modern machine design • Backgauge/stop • Backgauge system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened Ijdpfx Aex Imqljbxsth • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety features • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard equipment) • Robot/handling • Stable base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary union for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC controller with operator terminal • Teleservice via modem • Operation via monitor, mouse, and keyboard • Safety • Protective fence with access door World’s first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor system. Highest repeat accuracy thanks to angle sensors (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Stanje: rabljeno, Leto izdelave: 2022, Duplo Booklet Production System 5000 Offer consists of: - 3x Collator Tower DSC-10/60i - Stitching and Folding Unit DBM-500 - Face Trimmer DKTS-200 Duplo System 5000 Booklet Production 3x DSC-10/60i: 30 stations - Paper format: min. 120x148mm; max. 350x500mm - Paper weight: 40–300 gsm - Stack height: 60mm per station - Feeder: Suction/air separation - Controls: Double feed, missing sheet, paper jam detection, empty station warning - Power supply: 230V, 50Hz, 4.5A, 1035W - Dimensions: 630mm x 750mm x 1972mm - Weight: 290kg DBM-500: Folding and Stitching Unit - Paper format: min. 120x170mm; max. 350x500mm - Speed: > 5,000 pcs/h (A5) > 4,600 pcs/h (A4) > 4,000 pcs/h (A3) - Stitching capacity: 5mm (50 sheets, 80gsm) Ijdpjy Uifrofx Abxsth - Folding capacity: 25 sheets - Number of stitching heads: 2 - Controls: Paper jam detection, sheet position display, wire end - Memory: 12 programs - Fold and stitch types: Section folding without stitching; saddle stitching/section folding; corner stitching/section folding; corner stitching; block/side stitching - Power supply: 230V, 50Hz, 5A, 1150W - Dimensions: 1610mm x 770mm x 1020mm - Weight: 412kg Upon request, we can organize the following for you: Packaging, loading, transport (by sea or air), including customs clearance Sourcing of a leasing offer

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 5.000 mm, premer brusilnega koluta: 750 mm, premer brušenja: 580 mm, teža obdelovanca med konicami: 4.000 g, Used External Cylindrical Grinding Machine Gioria RU/S 5000 – High-Precision Grinding Technology for Large Workpieces Available from August 2025 – Machine under power for inspection! This robust and precise external cylindrical grinding machine Gioria RU/S 5000 is designed for machining workpieces up to 5,000 mm in length and 4,000 kg in weight. Equipped with hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for heavy-duty cutting and the production of high-precision components. 🔹 Key features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearing for vibration-free operation ✔ Large grinding wheel Ø 750 mm for efficient material removal ✔ Infinitely variable workpiece spindle speed (10–180 rpm) for optimal adjustment to various workpieces ✔ Hydraulic table drive (0.05 – 4.0 m/min) for precise longitudinal movements ✔ Digital display for X-axis for exact infeed Powerful equipment for maximum efficiency The machine comes with comprehensive accessories, including: Ijdov Tnhwepfx Abxjth ✅ Coolant filtration system with paper band filter (tank capacity: 450 liters) ✅ 6 grinding wheel arbors for flexible machining options ✅ 8 steady rests for stable support of long workpieces ✅ Wheel dresser positioned at the tailstock for precise dressing of the grinding wheel Ready for immediate use – Inspection possible in Stuttgart! The machine is currently under power and can be demonstrated. Further data: Centre height: 300 mm Centre distance: 5,000 mm Max. workpiece diameter: 580 mm Max. workpiece diameter with steady rest: 30 – 400 mm Max. workpiece weight between centres: 4,000 kg Spindle taper in workpiece headstock: MT 6 Spindle taper in tailstock: MT 6 Operating voltage: 400V/50 Hz Machine weight: approx. 20,000 kg Footprint: approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive: 20 kW Grinding spindle bearing: Hydrostatic Max. grinding wheel: 750x100x305 mm Max. grinding wheel peripheral speed: 1 – 34 m/sec. (with wheel Ø 750 mm) Workpiece headstock Speed range, stepless: 10 - 180 rpm Spindle taper: MT 6 Swivel range: +/- 45 degrees Work table Hydraulic table drive – Stepless adjustment 0.05 – 4.0 m/min Table swivel range: +/- 4 degrees Tailstock Quill stroke hydraulically actuated Quill stroke: 90 mm Centre mounting: MT 6 Wheel dresser positioned at the tailstock Coolant filtration system Coolant tank with pressure pump and paper band filter Tank capacity: 450 liters 📍 Delivery: Ex works loaded on truck 📅 Available from August 2025 ⚙ Warranty: None, as used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding operations at the highest level!

Stanje: rabljeno, največja dovoljena obremenitev: 5.250 kg, skupna masa: 5.250 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, dolžina tovornega prostora: 4.000 mm, Št. int.: B - 10 Po naročilu stranke Blohmenröhr * Tristranski kiper * Dvoosna prikolica * Nakladalne rampe * Nastavljiva vlečna ojla * Dovoljena skupna masa 5250 kg * Nosilnost cca 2250 kg * Zelo dobro stanje Možnost vračila starega vozila Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so neobvezujoči opisi in niso zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vse informacije v oglasu so neobvezujoče! Dostava po celotni Nemčiji na povpraševanje Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 Itsdpoxvf Szofx Abxjh petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Isdpjwftr Dsfx Abxsth Screw diameter: 70 mm Shot weight in polystyrene: 687 g/PS Clamping force: 3,000 kN Approx. machine weight: 19.4 t From series production Preheating unit and air soaking unit are not included in the package!

Stanje: rabljeno, Leto izdelave: 2024, vpenjalna sila: 650 kN, delovna prostornina: 2.212 cm³, tlak vbrizgavanja: 2.090 letvica, skupna masa: 28.000 kg, premer polžastega transporterja: 80 mm, Dobavni pogoji: iz lokacije Isdpfx Asy Tbzvobxeth Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control system MSX 501 Spindle speeds - infinitely variable 14,000 rpm Tool holder BT 40 Pallet changer with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Itodpfx Aoygx D Tobxoh Tool changer 60 positions Table size 500 x 500 mm Total power requirement 56 kW Machine weight approx. 11.8 t Space requirement approx. 5.8 x 3.6 x 3.0 m

Leto izdelave: 2013, obratovalne ure: 19.392 h, stanje: rabljeno, številka stroja/vozila: 1683, Vklop žarka, upravljanje TRUMPF CNC, X-os: 3.000 mm, Y-os: 1.500 mm, laserska moč: 5 kW, miza za nalaganje in razkladanje, transporter za ostružke/delce. Iedpfx Aoy T Ny Tobxeth

Stanje: rabljeno, Technical details: Intake nozzle diameter: 380 mm Filter area: 610 x 660 + 560 x 470 + 570 x 470 mm Total power requirement: 4.0 kW Dimensions (L x W x H): 0.6 x 1.1 x 2.2 m - 2x intake nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170 mm - Exhaust opening (W x H): 280 x 145 mm - 3 insert filters - with wall mounting Ijdeu Nwwdspfx Abxsth

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 950 kW (1.291,64 KM), vrsta prenosa: drugo, vrsta goriva: električni, barva: siv, skupna masa: 61 kg, Leto izdelave: 2025, obratovalne ure: 20 h, Kot novo - predstavitveni stroj AirBull 5000 Št. artikla: AB072016-05 4.940 m³/h (prost pretok) Moč: 950 W / 5,4 A Napetost: 230V / 50Hz Isdpfszbu Nusx Abxjth Glasnost: 48-69 dBA (na 3 m razdalje) Motor z brezstopenjsko regulacijo Dimenzije (D x V x Š): 735 x 570 x 615 mm z valji 735 x 560 x 615 mm brez valjev Teža: 62 kg (odvisno od filtra) Glejte na: airmex-absauganlagen.de/modelle/airbull-2000-3500-5000 Cena iz skladišča

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Isdpfx Abogl Nlmoxsth Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm Itsdod Nm Siepfx Abxsh *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Isdpfx Ajchqxxebxjth The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: Ijdpfogfm Rysx Abxoth - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Itodpfsxfwdsx Abxoh Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Itjdped N Dnhjfx Abxoh Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Itsdpoffh Atsfx Abxjh Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result