Metalografske Brusilni Stroj nakup rabljenega (31.204)

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Podpfxet Ii Nue Abisgt Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Table longitudinal travel: 1,530 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg incl. clamping Maximum traverse: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, modern, and future-proof control system. Photo shows machine already delivered with special options. - Operation via touch panel is exceptionally simple. - Symbols on the control panel are virtually identical to the original control, thus no retraining required. - Diagnostic function showing PLC messages and digital I/O. - Dressing function can be expanded or adapted as per customer request. - Spindle-oriented stop for the workpiece spindle available on request. - New maximum infeed of 40 mm, extendable on demand. - Digital readout on 2 axes. Resolution x-axis: 0.5 μm Options: - Encoder with digital display on workpiece headstock - Encoder with digital display on grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Pgedjuxftropfx Abijt Machine is equipped with an electronically controlled infeed system with stepper motor drive on the x-axis. Hydraulic table longitudinal movement and rapid traverse. Flexible application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum protection target must be determined via a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Psdpfx Abot Ii Rfoiegt Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180 ± ° Grinding spindle speed: 1,500; 1,700; 2,200 rpm Incremental feed: 0.001-0.030 mm/Ø per stroke Continuous feed: 0-0.95 mm/Ø Table swivelling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in Kellenberger – Overhaul / Retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your machines, metrically overhauled and newly painted. Version R: The machine is equipped with central lubrication and roller guides on the X-axis flat bed as well as air lift at the grinding headstock. – Digital display on 2 axes. X-axis resolution: 0.5 µm Optional extras available at a surcharge: – Rotary encoder with digital display on the workpiece headstock – Rotary encoder with digital display on the grinding headstock (no height adjustment with spindle possible) Pgjdpfx Aod Ih D Nsbist – New heavy-duty internal grinding attachment for 80 mm or 100 mm diameter, with height adjustment – Increase in centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – Operating tools – Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the fundamental safety and protection requirements stipulated in the BetrSichV 2015. A risk assessment according to BetrSichV is required to determine if the minimum necessary protection targets are met.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, HAAS UHS / Ročna ploščna brusilnica - Dolžina brušenja približno 350 mm - Širina brušenja približno 180 mm Pgedpszu Nphsfx Abijt - Višina brušenja približno 250 mm - Gib brušenja se izvaja ročno s pomočjo ročice - Možnost nagibanja (horizontalno) za 360 stopinj - Možnost nagibanja (vertikalno) za +- 15–20 stopinj - Splošna nastavitev kota - Število vrtljajev vretena 2500 / 5600 vrt/min - Moč pogona 1,1 kW Dimenzije: D x Š x V 1,2 x 1 x 1,7 metra / Teža 750 kg Pridržujemo si pravico do sprememb / napak pri vnosu podatkov.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, ABA – proizvodni obrat Aschaffenburg / ročna ploščata brusilnica FFK – magnetna plošča, približno 300 x 150 mm – delovno območje, približno 300 x 150 x 150 mm – dimenzije brusilnega diska, približno 200 x 20 x 76 mm – hitrost vretena, približno 2800 vrt/min – nastavitev mize, vzdolžna / ročna – nastavitev mize, prečna / ročna – nastavitev višine / ročna Pgedpfx Ajzypkpebijt – magnetna plošča / permanentni magnet – zaščita brusilnega diska – sesalni sistem Dimenzije: D x Š x V 1,1 x 1,1 x 1,8 metra / teža 850 kg Pridržana pravica do sprememb / napak pri vnosu.

Stanje: rabljeno, Stroj za brušenje rezal Weinig Rondamat 929 za izdelavo profilnih rezal. Proizvodnja iz ravne obdelovance ali ponovno brušenje rabljenih rezal s pomočjo šablone. Tehnični podatki: - Največji premer brusilnega diska: 225 mm - Največji premer orodja: 300 mm Podpjzrx Hqefx Abijgt - Najmanjši premer orodja: 80 mm - Največja širina orodja: 230 mm

Stanje: dober (rabljeno), Koda: 0424 Znamka: DMC - ITALY Model: EUROPA 120 Avtomatski brusilni stroj z dvema trakovoma za kalibracijo lesa, pohištva, notranje opreme, lesenih okvirjev, vrat, plošč, kompozitnih materialov in različnih drugih materialov. Tehnični podatki: - Masivna konstrukcija - Maksimalna delovna širina: 1200 mm - Maksimalna delovna višina: 170 mm - Dimenzije brusnega traku: 2200 x 1250 mm - 1. sklop: Gumirani kalibracijski valj, premer 220 mm, nastavljiva prijemala za pritisk obdelovanca, moč motorja 20 KM - 2. sklop: Finišni segment z nastavljivim pritiskom, moč motorja 10 KM - Puhala za čiščenje brusnega traku - Regulator hitrosti pomika traku: 3,5 – 17,5 m/min - Vakuumska miza, moč motorja 7,5 KM - Avtomatsko dvigovanje mize - Avtomatsko pozicioniranje mize - 2 odsesovalna priključka, premer 200 mm - Delovni tlak: 7 bar Pjdpfxjzp D Eas Abiegt - Skupne dimenzije: 1900 x 1800 x 2100 mm (V x Š x G) - Teža: 2500 kg

Stanje: rabljeno, Stroj za brušenje rezalnih orodij brez dodatne opreme. Pgedpszt Iwzefx Abist

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Automatische Schleifmaschine VIET Mod. Rita 4C EL Fester Tisch, verfahrbare Aggregate Arbeitsbreite: 1350 mm Arbeitshöhe: 4 – 160 mm Nr. 03 Absaughauben, Anschlussdurchmesser 150 mm Vorschubgeschwindigkeit: 6 – 20 m/min mit 3-kW-Frequenzumrichter Hauben-Reinigungsbürste Durchmesser: 120 mm Ausstattung: 1. Querschleifaggregat, Mod. TET 60, elektronisches Pad, 60 Sektoren Lamellenband 6150 x 140 mm Eigenes Schleifband 8350 x 170 mm Bandgeschwindigkeit: 5,6 – 26,2 m/s Frequenzumrichter: 15 kW Drei Absaughauben, Durchmesser 140 mm 2. Walzenschleifaggregat, Mod. R320 – 40, Gummierung 40° SH Schleifband 3250 x 1400 mm Bandgeschwindigkeit: 1,5 – 12,5 m/s Frequenzumrichter: 15 kW Bandreinigungsgebläse Zwei Absaughauben Durchmesser 140 mm, eine mit 200 mm 3. Pufferpoliergruppe, Mod. TE 60, elektronisches Pad, 60 Sektoren Schleifband 3250 x 1400 mm Bandgeschwindigkeit: 2,9 – 14,1 m/s Frequenzumrichter: 15 kW Bandreinigungsgebläse Zwei Absaughauben Durchmesser 140 mm, eine mit 200 mm 4. Querschleifaggregat, Mod. TET 60, elektronisches Pad, 60 Sektoren Lamellenband 6150 x 140 mm Eigenes Schleifband 8350 x 170 mm Bandgeschwindigkeit: 5,6 – 26,2 m/s Frequenzumrichter: 15 kW Drei Absaughauben, Durchmesser 140 mm Podsltlx Tspfx Abiogt 5. Scotch-Brite-Aggregat Motorleistung: 0,55 kW Absaughaube, Durchmesser 140 mm 6. Bürstenaggregat Motorleistung: 0,55 kW Absaughaube, Durchmesser 140 mm 7. Plattenreinigungs-Rotationsgebläse

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speed: 1500, 1700, 2200 rpm Infeed, step-by-step: 0.001–0.030 mm/Ø Infeed, continuous: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. - between centres (with clamping): 130 kg Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.5 t Space requirements approx.: 4.2 x 2.0 m As a world-leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in new-machine quality with warranty, but also offer servicing for your machines, including recently delivered units, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways in the X-axis flat slideway, as well as standard air lift-off in the grinding headstock. - Digital readout on two axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with this spindle) - New, stable internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increasing centre height to max. 225mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Pgsdpfx Abeuxftxjiet Additional accessories available on request. Note: The machine tool currently does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum safety targets must be determined via a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Pjdpfouwv H Hox Abijgt Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure Pedpfxeuxfu Ne Abiegt SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina 650 mm, kombinirana enota s kalibracijskim valjem in čevljem, dve podajalni hitrosti, oscilacija traku, električna nastavitev mize, merilnik materiala Pgjdpfx Aozxqapjbijt

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. Pgedpfx Absuxft Eeiet - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Pjdpouxfucofx Abiogt Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina 1350 mm kalibracijski agregat z kovinskim valjem kombiniran agregat z dvema gumijastima valjema in večsekcijskim copatom Pgsdpszz Nmmefx Abijt oscilacija s fotocelicami aktivacija funkcij stroja s panela pihanje traku neprekinjeno uravnavanje hitrosti pomika brusilnega traku na 2. agregatu večsekcijski copat pnevmatsko vklopljen z regulacijo leto izdelave 2007 električna nastavitev mize merilnik debeline materiala vakuumska podtlačna miza

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 130 kg, širina na sredini: 600 mm, premer brusilnega koluta: 450 mm, skupna širina: 2.110 mm, skupna dolžina: 3.120 mm, skupna višina: 1.435 mm, premer brušenja: 350 mm, hod vretena: 30 mm, širina brusilnega kolesa: 50 mm, hitrost vretena za brušenje: 2.000 obr/min, skupna masa: 3.100 kg, Vitesse de broche de rectification : 1500 ou 2000 tr/min (changement de courroie manuel) Course axe Z : 750 mm Course axe X : 265 mm Puissance de broche de rectification : 3,7 kW Comprend les accessoires standards suivants : - Réservoir de liquide de refroidissement 120 litres avec pompe de 0,4 kW (200 l/min) et séparateur magnétique - Contre-pointe hydraulique - Tôle pare-éclaboussures amovible - Centrale hydraulique - Meule standard Ø 450 x Ø127 x 50 mm - 1 flasque de meule - 1 extracteur de flasque de meule - Support de dressage avec diamant sur la contre-pointe - 2 pointes de centrage - Comparateur pour l’alignement de la table à 0° - Éclairage machine - 3 crochets amovibles pour levage par grue Pjdpfxjc Tnq Ij Abiogt - Vis de mise à niveau avec plaques de pose - Documentation machine Comprend également les accessoires spécifiques suivants : - Dispositif de rectification intérieure - Variateur (Mitsubishi) pour la régulation de la vitesse de la broche de travail - Variateur pour la régulation de la vitesse de la broche de rectification avec moteur 5,5 kW, incl. affichage - Affichage digital 2 axes Heidenhain ND 780

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration Podpfx Abjt Ii Nboiegt - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper Pjdpfsv I Eq Ssx Abijgt - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: rabljeno, Profilna brusilnica Loeser S0 za brušenje profilov s pomočjo šablon. Brusilni trak se vodi čez profil/šablono in tako prenaša obliko na les, ki se ročno pomika skozi stroj. Tehnični podatki: Podezryxbspfx Abiegt - Dimenzije obdelovanca D x Š x V, maks.: približno 500 x 300 x 100 mm - Moč motorja: približno 2 kW

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table surface reground - New table geometry - New geometry: workpiece support (WSS) to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle Pgedpfsvx Dvusx Abijt Gap control (GAP) Paper band filter

Stanje: zelo dobro (rabljeno), Širokopasovna brusilnica HOUFEK Buldog 5 SPB 1100 - rabljena - Kombinirana enota s kontaktno valjčno in brusilno ploščo, kontaktna valjčna iz jekla, pnevmatična aktivacija kontaktne valjčne, digitalni prikaz za višino brušenja, avtomatska nastavitev debeline, brezstopenjska hitrost podajanja, avtomatsko centriranje preproge, oscilacija brusilnega pasu ----- Tehnični podatki ----- Delovna širina: 1100 mm, Pgodpfx Abjz E Rz Roist Število pasov: 1 kos, Velikost brusilnega pasu: 1120 x 2200 mm, Hitrost brusilnega pasu: 3–24 m/s, Hitrost podajanja: 3–15 m/min, maks. debelina obdelovanca: 160 mm, min. debelina obdelovanca: 3 mm, premer odvodnega priključka: 140 / 140 mm, dimenzije (D x Š x V): 1800 x 1800 x 2350 mm, teža: 1390 kg Informacije o kakovosti: - Preverjen potek pasu / neravnotežje - Preverjena / popravljena brusilna plošča - Preverjena nastavitev višine - Celovito osnovno čiščenje - Takoj pripravljena za uporabo

Leto izdelave: 2011, stanje: rabljeno, Premer brusilnega krožnika: 600 mm, višina brušenja: 400 mm, največja obremenitev mize: 500 kg, dolžina: 2540 mm, širina: 2130 mm, višina: 2350 mm, teža: 5,2 t, z navodilom za uporabo, navodili za namestitev in priročnikom. Poseben program brušenja: brušenje čelnih površin. 1x standardni vpenjalnik za brusilne krožnike 25–100 mm za luknjo premera 127 mm, orodje (1x vilčni ključ, 1x pritrdilni vijak). Možen je ogled na kraju samem. Podoz Da Nnjpfx Abisgt

Stanje: rabljeno, Grinding diameter 350, 450 mm Grinding length 600 mm Centre height 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding headstock swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Table swivelling ±10° Longitudinal table travel 900 mm Table traverse speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight—unsupported 130 kg including clamping Internal spindle mounting 70 mm Total power requirement 6.5 kW Machine weight approx. 2.2 t Space requirement approx. 3.1 x 2.0 m As a global market leader in Kellenberger overhauls/retrofitting, we not only deliver machines in like-new quality with warranty, but also offer service for your machines, with metric overhaul and new paintwork. Pgedpfed Ih D Esx Abiot Photo shows a previously delivered machine with possible different options. Machine is equipped as standard with central lubrication and roller guideway in the X-axis flat bed, as well as air lift in the grinding headstock. BEMA standard features: - Digital display in 2 axes. X-axis resolution 0.5 micron - Speed display for grinding spindle - Stepless grinding spindle speed 70–100% - Stepless internal grinding spindle speed 70–100% - Workpiece spindle driven by three-phase motor, infinitely variable via frequency inverter Optional equipment (subject to extra charge): - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (spindle height adjustment not possible) - Sine bar - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Drawbar for chuck Of course, our fully reconditioned machines come with 12 months warranty (only applicable to neighbouring countries). Further accessories on request. The machine tool does not currently meet the essential safety and protection requirements as outlined in the German Occupational Safety Ordinance (BetrSichV) 2015. Determination of required minimum safety level must be established via a risk assessment according to BetrSichV.