Mcwel(Miller) M630 nakup rabljenega (100)

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 96 mm, premer žaginega lista: 300 mm, širina skobljanja: 300 mm, vhodna napetost: 400 V, moč: 3 kW (4,08 KM), vhodna frekvenca: 50 Hz, dolžina pomične mize: 2.250 mm, Rabljeni SAMCO CU 300K je vsestranski kombinirani stroj za obdelavo lesa, namenjen profesionalni uporabi. Združuje več funkcij v eni napravi in je idealen za delavnice z omejenim prostorom. Kljub letnici izdelave nudi robustno konstrukcijo in zanesljivo delovanje pri vsakodnevni uporabi. Oprema stroja: Enota za krožno žago Ravnalni skobeljnik Debelinski skobeljnik Rezkalna enota Dodatni tehnični podatki: Lrsdpoyyltijfx Aamjp Debelina obdelave pri debelinskem skobljanju: 230 mm

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer žaginega lista: 250 mm, globina reza: 60 mm, dolžina odseka (maks.): 3.300 mm, Rabljena ELCON formatna žaga tip 215D je sodobna in zmogljiva navpična formatna žaga za natančen razrez različnih ploščastih materialov. Z dolžino reza 3.300 mm je idealna za uporabo v mizarskih delavnicah in industrijskih obratih z omejenim prostorom. Stroj je v izjemno ohranjenem stanju in prepriča z visoko preciznostjo, mirnim delovanjem in robustno konstrukcijo. Oprema stroja Navpična formatna žaga Precizni vodilni sistem Stabilno valjčno ležišče Priključek za odsesavanje Robustno ogrodje stroja Lredpfx Asyyk Nieamop Ergonomsko upravljanje Ostali tehnični podatki Vertikalna višina reza: 2.100 mm Priključek za odsesavanje: Ø 100 + 80 mm

Stanje: rabljeno, Univerzalna rezkalna stroj CME model FU31CM, miza 1860 x 360 mm (plus dva podaljška po 300 mm vsak), približno 500 mm pod orodjem, kolenska glava, s horizontalnim dodatkom, DRO Sony 4 osi ACURITE z tehtnicami. Vreteno 40 INT. Stroj v izjemnem stanju, iz univerze. Ledpfx Asywzlcsamjrp

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, dolžina ozemljitvenega kabla: 3.000 mm, vrsta hlajenja: zrak, varilni tok (min.): 30 A, varilni tok (maks.): 60 A, Please note: This device is a trade-in unit. For sale: Welding Ring Plasmacut 65P 30-60 AMP Cuts up to 30mm 400 Volt Fully overhauled, serviced, and tested. Includes plasma torch, ground cable with clamp, and air hose. Viewings by appointment only. Test welding is possible. A video of the machine in operation is available upon request. We deliver to countries such as Spain, Germany, Austria, Lithuania, Greece and all other countries within and outside Europe, shipped on Euro pallets per transport. All of our machines have been serviced and are 100% ready for operation, unless otherwise specified. The photos above show the actual machine. We can also offer you other types of machines, including: Used, New, MIG, MAG, CO2, TIG, Pulse, AC/DC, Plasma, Water-cooled, Electrode welders. We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties. Lrjdpfx Aajy Udykemsp

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 353,04 kW (480,00 KM), vrsta goriva: dizel, skupna masa: 18.000 kg, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 4x2, medosna razdalja: 4.000 mm, gorivo: dizel, zavore: intarder, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2025, Kabina XG MY2025 s pnevmatskim vzmetenjem, Aereo Kitom, LED žarometi, strešno okno, integrirana klima, motor MX-13 z Millerjevim ciklom, menjalnik Traxon s prediktivnim GPS, hladilnik s predalom, DAF Infotainment Luxury Plus, rezervoar 765+430, ZF intarder, zaščita proti prahu, 3 leta popolne garancije. Lredpewdifdofx Aamep

Stanje: nepreverjeno (rabljeno), številka stroja/vozila: Henneke MT6, Funkcionalnost: nepreverjeno, Henneke visokotlačna mešalna glava serije MT "MT6" Lodpfxjx El Drs Aamsrp

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, dolžina ozemljitvenega kabla: 4.000 mm, trajanje garancije: 3 meseci, vrsta hlajenja: voda, dolžina paketa cevi: 4.000 mm, varilni tok pri 60% delovnega cikla: 245 A, varilni tok pri 100% delovnem ciklu: 210 A, varilni tok (min.): 5 A, varilni tok (maks.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Overhauled, tested, serviced, and ready for immediate use Technical specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 stroke Lodpfx Ajywgpaeamerp Pre-gas / Post-gas Start current / End current Current up-slope / down-slope Frequency control AC balance AC frequency Electrode option Includes Parweld PRO20 welding torch, ground cable with clamp, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding operation is available. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and any other countries within and outside Europe using Euro pallets per shipment. All our machines have been serviced and are 100% ready for operation unless otherwise stated. The pictures above show the actual machine. We can also offer you other types of machines, such as: Used, New, Mig, Mag, CO2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 7,35 kW (9,99 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer vretena: 30 mm, vrtilni razpon: 46 °, največja hitrost vrtenja: 18.000 obr/min, vrtljajska hitrost (min.): 1.000 obr/min, The new profil 92 M e-motion spindle moulder is the Format4 premium model designed for maximum operating comfort and guarantees absolute efficiency with minimal setup times during milling operations. The advanced electrospindle features an HSK 63F interface for a pneumatic tool quick-change system. The swiveling range of ±46° allows for unlimited processing versatility. With the self-explanatory e-motion control via the 15" touchscreen operating panel, spindle speed, spindle height and angle, as well as fence adjustment and even the table opening, can be set intuitively and precisely. Memory slots for tools, spindles, and milling programs ensure perfect repeat accuracy and the shortest setup times. Controlled, eccentric supporting rings provide maximum table support area and significantly reduce adjustment effort, particularly during spindle swiveling. The newly developed, heavy-duty precision milling fence features two controlled axes for precise depth adjustment of the entire fence and an additional, independent depth positioning of the right (infeed) jaw. For comfortable access during curved milling operations, the fence can be completely swung away from the working area. Optionally, the Format4 profil 92 M e-motion can also be equipped with an electrically height-adjustable feed unit. Further technical data: Tool diameter: max. 250 mm Usable spindle height: 140 mm Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F milling spindle Ø 30 mm, 140 mm 118 650 mm "Integral" safety rulers 119 Table opening 255 mm with controlled eccentric supporting rings 183 Table extension on both sides 670 mm with 2200 mm pull-out frame 213 Electrically height-adjustable feeder support incl. horizontal tube 220 Parts list holder with A9 clipboard Benefits: - Highly efficient electrospindle with stepless speed control and HSK 63F interface - Positioning control for milling height and angle +/–46º - Positioning control for milling fence with offset - Smartouch with intuitive e-motion control system Lrjdpfswztr Njx Aamjp - Table opening with controlled eccentric supporting rings (option) - Electric height adjustment for feeder unit on overhead column (option) Additional information: - The electrospindle is equipped with an HSK F63 quick-change system - Clamping range: 2–25 mm for OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm pull-out frame - Table opening 255 mm with controlled eccentric supporting rings

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, The Format4 creator 950 in a wide range of equipment variants – your CNC machine for custom woodworking challenges. Efficient CNC machining at a fair price: this principle is central to the creator series of machines. All models feature attractive equipment packages with cutting-edge CNC technology and can be individually configured to suit specific requirements. The creator 950 is not only an easy and safe entry into the world of CNC, but also serves to relieve your CNC machining centers. Your benefits at a glance: - Powerful CNC technology on just 5 m² of installation space - All-inclusive: 4-sided formatting as standard - Ready to go: Maximum productivity without setup times - No need for pod and rail positioning - Suitable for applications ranging from interior outfitting to door production - Traditional top-down machining – simple loading - Intuitive operation via control panel - User-friendly software - Optimum extraction results - High-end performance at the best price in every configuration - Cabinet machining possible with Lamello Clamex-P Additional equipment: - C19: 2nd reference stop cylinder for long workpieces - C71: Folding support tables front and rear – roller table - C198: Pick-up station for tool and aggregate changes Lodpfsu Eg A Uex Aamsrp - C200: 4-position linear changer for use with aggregates - C233: Lifting bracket for crane transport - C490: F4design (incl. 3-axis postprocessor) - 800: E-Learning F4Design Working area Creator: Travel distance axis X = 1475 mm (clamp) Y = 1550 mm Z = 225 mm Working field X = 3500 mm (infinite) or 130 kg maximum load Y = 950 mm Z = 80 mm maximum workpiece thickness Equipped with: - High-performance PC - 24” LED color display - Keyboard, mouse, and mouse pad - 1 USB interface

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,02 kW (24,50 KM), Highest precision and large cutting heights combined with fast feed rates – This is only possible with an uncompromisingly stable gantry design. This uncompromising quality is achieved through the use of a tried-and-tested tubular frame construction. The thick-walled steel tubes are meticulously welded by our experienced staff over many hours into a complex frame. This process forms the solid foundation for the high-precision guides on which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 millimeters The machine can process workpieces up to 3200 millimeters in length and width. This means the saw carriage can execute cuts up to 3200 millimeters long, and the material pusher can be set to a dimension of up to 3200 millimeters from the cutting line. Ljdpfxjwfdiys Aamjrp Automatically adjusting cutting height up to 118 millimeters A powerful motor drives the saw blade through materials with a cutting height of up to 118 millimeters. For ideal cutting geometry, the saw blade should project approximately 10 millimeters above the workpiece. This optimizes energy consumption, noise emission, and blade life. This is a significant benefit for users of our machines, and every machine comes standard with automatic cutting height adjustment. The machine detects the height of the cutting material and automatically sets the saw blade to the correct height. Even when cutting multiple panels in a stack, the saw blade drive must show no weakness. That’s why we equip our saw with a high-torque 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height. This expands production versatility and enables precise grooving. The adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP) 3x400 V / 50 Hz Additional equipment: 14 Stepless speed regulation 2000–5000 rpm 95 Pneumatic performance pressure device 50–2100 mm 24 Dust package on saw carriage for processing gypsum- and cement-bonded materials 30 Air cushion table 2300 x 600 mm (2 pieces) 28 Mobile machine tables on linear guides and rollers 40 Number of package clamps in double-finger design, opening height 105 mm 41 Additional double-finger package clamp, opening height 105 mm 38 Automatic trimming via laser measurement 45 Additional double roller conveyor for sagging materials 44 24" touchscreen control 90 Network connection preparation 86 Control cabinet in special position 700 Ardis module 1 710 Ardis module 2 714 Post-processor 720 Ardis module 3 400 Helical rack for smoother operation 401A Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min 403 Cut length preselection via switch 404 Double pressure beam SL 3200 437 Technology database incl. controlled pressure regulation for pressure beams and package clamps 92 Transport preparation for crane unloading Incl. delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 5,52 kW (7,51 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer žaginega lista: 300 mm, skupna dolžina: 6.689 mm, skupna širina: 1.766 mm, skupna višina: 3.055 mm, dolžina rezanja (maks.): 5.300 mm, globina reza: 80 mm, premer ekstrakcijske šobe: 140 mm, Further technical data Vertical cutting height: 2,150 mm / 2,150 mm (lowered) Horizontal cutting height: 2,100 mm Width: 1,766 mm (free-standing) / 1,383 mm (wall-mounted) Cutting length: 5,300 mm / 3,000 mm / 5,000 mm (lowered) Saw Frame Self-supporting, torsion-resistant, welded frame with truss reinforcements, mounted on 4 sturdy machine feet Automatically retracting wooden support wall TRK1, with integrated small-part support (wood) Panel lowering device (PAV) with 2 panel lowering units, suitable for panel materials with a maximum weight of 160 kg (80 kg per unit) Length stop profile above the central support up to zero cut position Continuous length stop profile above the roller support with flip stop Precise 17-fold roller support, pneumatically braked Swing-away central support along the entire length, bearing grid made of aluminium with plastic supports Wall-mounting kit Aluminium small-part support (1 pair), individually deployable Saw Beam & Saw Unit Stable, durable saw beam with double locking mechanism Rugged, precision-guided motor carriage for high cutting accuracy Pneumatic clamping of the motor carriage Lrjdpfx Aajxazapsmsp Powerful, high-torque saw motor 5.5 kW (7.5 HP) Integrated high-performance TRK dust extraction for external extraction system Supersilent sound insulation Electromagnetic motor brake Paper holder Control Clear button control panel for intuitive operation Positioning of the panel lowering device via two-hand control Operator guidance via status indicator lights on the panel lowering units Operating hours counter Measurement Adjustment Program cam switch for recurring dimensions Laser-assisted display of horizontal cut Digital measuring system DMS-Y, incl. motorized fine adjustment Digital measuring system DMS-X, incl. manual fine adjustment, mounting position selectable above central support or roller support Special Equipment 006 Striebig free-standing support 103 Digital measuring system DMS, X-axis 104 Digital measuring system DMS, Y-axis 105 Additional digital measuring system DMS, X-axis 200 Pro Lock Easy-Fix tool clamping system for saw blade 201 Scoring saw unit VSA 300 Additional panel lowering unit 401 Complete aluminium small-part support Incl. delivery and installation within postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 130 h, moč: 6,5 kW (8,84 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Dalsze dane techniczne Grubość obrzeża: 0,4–3 mm Wysokość elementu: 10–45 mm Posuw łańcuchowy: 8 m/min Łączny metraż pracy: 5 864 mb Jednostka do obróbki zgrzewającej do maks. 2 mm ubytku Podawanie pasków obrzeża pojedyncze, gilotyna do sztywnego PVC i ABS do 3 mm grubości Teflonowany zbiornik na klej o pojemności 1,2 kg z wałkiem klejowym Agregat do odcinania z mocą 0,18 kW Przyłącze odciągu: 2x80 mm, 1x120 mm 2x piły HW D-80 mm, Z16 Agregat wielofunkcyjny z obrotami 12 000 obr./min i mocą 0,22 kW z szybkim nastawem do obrabiania promieni, na równo i fazowania Panel sterowania z wyświetlaczem LCD i klawiaturą Wysuwana podpora elementu wysuwana do 450 mm Ręczna regulacja wysokości elementu: 10–45 mm Stół obrotowy do obrzeża w rolce Lrodpjyfvhajfx Aamjp Minimalna szerokość elementu: 70 mm Minimalna długość elementu: 210 mm Wysuwana podpora elementu wysuwana do 450 mm Ręczna regulacja wysokości elementu: 10–45 mm Wyposażenie dodatkowe: Skrobak do powierzchni, mechanicznie załączany Skrobak do promieni

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 432.08.202.22, globina vrtanja: 70 mm, vhodna napetost: 400 V, pritisk: 8 letvica, vhodna frekvenca: 50 Hz, moč: 1,5 kW (2,04 KM), FD 921 je opremljena z 21 vrtalnimi vreteni v razmiku 32 mm. Za vrtanje moznikov, vrstičnih lukenj in skodelastih tečajev se lahko uporabljajo svedri do premera 35 mm. Velika litoželezna miza, stranska prislona, pnevmatski pritiskači obdelovanca in ergonomski upravljalni elementi naredijo FD 921 za vrhunski moznični vrtalni stroj. Dodatni tehnični podatki: Število vrtalnih glav: 21 (11 desno, 10 levo-vrtečih) Razdalja med vreteni: 32 mm Maks. velikost obdelovanca: 850x3000 mm Maks. višina obdelovanca: 65 mm Potreben zračni tlak: 6-8 bar Oprema: Lodpsyf A N Djfx Aamerp 11 nosilcev orodja s 5 mm desno rezalnim mozničnim svedrom 10 nosilcev orodja s 5 mm levo rezalnim mozničnim svedrom Sistem za bočni prislon z 8 ustavitvami 2 dodatna pnevmatska pritiskača Kotno vodilo za FD 21 Nosilec za stranske prislone in dodatno opremo Merilo za prenos razdalje litoželeznih prislonov Sistem vezave za podaljšanje mize

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 5,52 kW (7,51 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer žaginega lista: 300 mm, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 4.800 obr/min, skupna masa: 1.200 kg, dolžina rezanja (maks.): 5.300 mm, globina reza: 80 mm, premer ekstrakcijske šobe: 140 mm, Dalsze dane techniczne Wysokość cięcia w pionie: 2240 mm Lrjdpoxazflsfx Aamep Wysokość cięcia w poziomie: 2100 mm Przyłącze sprężonego powietrza: 6-10 bar CONTROL definiuje klasę premium w pionowej technologii cięcia dzięki wysokiemu poziomowi automatyzacji procesu cięcia oraz innowacyjnym opcjom wyposażenia. Inteligentna wizualizacja na przejrzystym 12-calowym komputerze z ekranem dotykowym prowadzi użytkownika krok po kroku przez proces cięcia. Za pomocą logicznie zaprojektowanego interfejsu obsługujesz system CONTROL łatwo i wygodnie na 12” ekranie dotykowym. Dzięki seryjnemu EPS-Y pozycjonujesz zespół tnący automatycznie do poziomego cięcia. Również w standardzie system ABO zapewnia automatyczne wykonanie górnego cięcia wyrównującego. Z tą opcją również dolne cięcia wyrównujące wykonywane są automatycznie. Obracanie materiału płytowego oraz związane z tym ciężkie prace manualne nie są już konieczne. W zestawie dostawa i montaż na terenie kodów pocztowych 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, dolžina ozemljitvenega kabla: 3.000 mm, trajanje garancije: 3 meseci, vrsta hlajenja: zrak, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, For sale: Cjays TIG 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 cycle Pulse function Pre-gas / Post-gas Current up-slope / down-slope Start current / End current Electrode option Suitable for welding steel and stainless steel Test welding possible Includes 4-meter SR17 welding torch, ground cable, gas hose, spare parts, and 3-month warranty. Test welding is possible. A video of the machine in welding operation is available upon request. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per transport. All our machines have been serviced and are 100% operational, unless otherwise stated. The images above show the actual machine. Lrsdpsy Rqh Tofx Aamep We can also offer you other types of machines, such as: Used, New, MIG, MAG, CO2, TIG, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, CIRCULAR SAW table length: 2600 mm scoring unit Ledpfjvitbusx Aamjrp blade tilt adjustment blade height adjustment (up/down) maximum blade diameter: 300 mm SPINDLE MOULDER spindle diameter: 35 mm spindle speeds: 2000 / 3100 / 4400 / 7000 rpm spindle height adjustment (up/down) SURFACE & THICKNESS PLANER working width: 410 mm 3-knife cutter block table length: 1800 mm maximum material height: 220 mm feed: single speed HORIZONTAL BORING MACHINE

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces, flush trimming unit with VR function, HF milling unit, chain feed, double roller upper pressure, and extendable workpiece support rail. Suitable for ABS and PVC edge banding rolls, as well as fixed lengths from 0.4 to 2.0 mm and workpiece heights from 8 to 50 mm. Feed speed: 5.5 m/min • 2 free spaces for finish units • 5.6" color touch screen • Automatic edge feeding for roll material via rotatable reel table D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters guarantee clean and tear-free jointing of the workpieces before edge application. Lrodpfxsip Uzps Aamop • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue burn-off if the machine remains switched on but is unused for extended periods). (Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change). • Pressure zone consisting of a powered pressure roller operating synchronously with the glue roller, and an adjustable pressure roller with spring tension, ensuring a strong joint between the edge material and the workpiece, adjustable via SIKO display. • Flush trimming unit for front and rear workpiece edges, including VR function (for vertical curves), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special cutters, suitable for radius and chamfer trimming, horizontal and vertical workpiece tracing, unit adjustment with digital counters for different edge types, height adjustment of the upper unit via upper pressure. • 5.6" color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is idle, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Riepe spray systems for anti-adhesive or cleaning agents available as option Optional finishing units (2 free slots): • Radius scraper unit: Slight cutting action removes any milling marks from radius cutters, ensuring a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Light cutting action removes any glue residues from the glue line on the workpiece surface. • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, provide a superb finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), high-frequency cross-cutting station, high-frequency milling unit, chain feed, double pressure roller top pressure, extendable workpiece support rail, and signal lamp for workpiece sequencing. Suitable for ABS, PVC, melamine, and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 7.0“ color touch screen • Automatic edge feeding for roll material via a rotary turntable D=600 mm • Infeed lineal (400 mm) with support • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge application. Lsdpfx Aaod R U Acemjrp • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof, with bottom glue reserve (excess glue is automatically fed back into the glue pot), fine adjustable glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if machine remains switched on but is unused for a long time). Optional: EVA/PUR glue pot with drain/cleaning function for fast color change • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for perfect edge bonding between edge material and workpiece; pressure zone adjustable with digital counter. • High-frequency cross-cut saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades, and high-precision linear guides for clean, precise cutting; equipped with extraction hood. • High-frequency combination milling station, 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical workpiece sensing, unit adjustment equipped with digital counters for different edge types, 2 chip extraction hoods with central extraction nozzles 2 x Ø 100 mm; height adjustment of upper unit via top pressure. • Rotatable control panel with 7.0” color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, on/off of units, and error diagnostics • LED lighting in the cabin • Riepe spray systems for anti-adhesive or cleaning agents optionally available Optional finishing units (2 free spaces): • Radius scraping unit: Light pulling cut removes possible radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraping unit: Removes glue residues from the workpiece surface at the glue joint with a light pulling cut • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. Lrjdpfx Aof Tdwceamjp • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Lodpfx Ajl Rix Nsamorp • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA-PUR glue pot with drain function optional), HF-cut-off saw station, HF milling unit, corner rounding unit, chain feed, double pressure rollers, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer edge-banding rolls as well as fixed lengths from 0.4 – 3.0 mm thickness and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 10.0" color touchscreen • Automatic edge feeding for roll material via rotatable reel D=600 mm • Infeed fence (400 mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of workpieces before edge banding • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on but unused for an extended period). Ljdpfxjd R U Ads Aamorp Optional: EVA/PUR glue pot with drain/cleaning function for rapid color changes • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for optimal joint formation between edge material and workpiece; pressure zone adjustment with mechanical SIKO indicator. • High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm, two saw blades, and high-precision linear guides ensure clean and accurate cuts, equipped with extraction hood. • High-frequency combination milling unit: two powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical sensing of workpiece, unit adjustment with digital counters for different edge types, two chip extraction hoods with central extraction port 2 x Ø 100 mm, height adjustment for the upper unit with pressure beam. • Corner rounding unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, switchable from the control panel. Optionally single-sided (front or rear edge) or double-sided corner rounding. • Swiveling control panel with 10.0" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtimes, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Optional Riepe spray systems for anti-adhesive or cleaning agents Optional finishing units (2 free slots): • Radius scraper unit – Light, pulling cut removes any radius-milling marks and ensures a perfect finish. Fine adjustment via digital counter. • Surface scraper unit – Light, pulling cut removes glue residue from the workpiece surface at the glue joint. • Buffing unit – 2 motors 0.05 kW, 1.50

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. Ledpfx Aaed R U Agsmjrp • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, Oprema: kabina, The EasyArc Welding Robot from OTC DAIHEN Simple plug & play installation with the FD19 V8 + ARXIS/Welbee MIG MAG or the FD19 B6 + A350P/A500P ACDC power source. Welding table with intelligent system grids for clamping and positioning the workpieces. Delivered fully assembled with CE-compliant documentation. Optionally available with a horizontal turning positioner for pipe welding. Operable with the TeachBox or PhotoTeach. Scope of delivery: - OTC MIG/MAG or TIG power source - OTC FD19 V8 or B6 robotic arm - 1200x2000mm 3D Siegmund clamping table - Housing - CE documentation - TeachBox or PhotoTeach control system - Optional: Horizontal turning positioner for pipe welding Mobile compact design: space-saving, flexible, and cost-effective to acquire. User-friendly operation with the OTC Easy Teach control system: minimal time required to create welding programs, even without extensive training. Welding program creation possible even without comprehensive training. Robust and precise welding robot: relieves employees and ensures optimized, consistent weld quality. Safety technology according to CE standards: electrically monitored, lightweight protective housing. Lrjdpfxsywgq Rs Aamjp Please do not hesitate to contact us for further information. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries inside and outside Europe, using Euro pallets per shipment. All our machines have been serviced and are 100% ready for operation, unless stated otherwise. The images above show the actual machine. We can also offer you other types of machines, such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: rabljeno, Leto izdelave: 1992, Oprema: zavorni sistem na stisnjen zrak, Tarpaulin / Müller triangle / grain slider / hydraulic through-drive Lrjdpfsuyk D Eex Aamsp

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, TPS/Miller/Keyplant 6m sistem za navarjanje (cladding) cevi Lrsdpeu Hfkmsfx Aamsp Dvojna varilna glava z avtomatsko kontrolo višine obloka (AVC) Varilni izvori Miller Maxstar 700 Varilni izvori za vročo žico Miller Maxstar DX 200 Nov težko-obremenljiv sistem za vodno hlajenje (chiller) Težko-obremenljiv pogonski vrtljivi nasadni glavni ležaj s prehodno izvrtino Vpenjalno območje za premer cevi: 150 mm – 750 mm