Maka Ap 70 nakup rabljenega (15.643)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22701003406, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention, the images are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Gujdpoy Sk Rqefx Aa Usc Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-trailer for Forwarders Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame with “Load-Lock profile” for attaching lashing straps 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Quarter shell mudguards Document box on front bulkhead, left side (mounted at a slight angle) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connector line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The towed vehicle may only be hauled by tractors which ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and Tyres 385/55 R19.5", make at manufacturer’s discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights (3 sets of old Hella lamps still at factory 2, to be installed if possible), yellow LED side lights installed as far in as possible 2 white position lights at the front, protected by 12 mm round iron crossbars welded above 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Floor Screen-printed plywood approx. 30 mm thick, transverse joints with Omega insert, mounted on longitudinal bearers for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping may occur due to weather exposure! Front Bulkhead/Corner Posts Approx. 1,200 mm high, steel corner posts in volume design Approval / Plates Country of registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line number plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 3002 carmine red Landing legs: black coated Front wall: RAL 3002 carmine red Attention, the images are archive photos! The vehicle may still be in use!

Stanje: rabljeno, Leto izdelave: 2012, Rezkalni stroji Pomik X: 700 mm Pomik Y: 420 mm Pomik Z: 380 mm HSC-stroj Število osi: 3 Rezkalni stroj / Obdelovalni center Vrtljaji vretena: 24.000 min⁻¹ Območje vrtljajev do: 24.000 min⁻¹ Izmenjevalnik orodij: 38-kratni Pogonska moč: 20 kW Integrirana 4. os (TSUDAKOMA) Guodpsy Nxc Njfx Aa Uec

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7567 TEHNIČNI PODATKI - avtomatsko podajanje letve - 2 kos pnevmatskih pritiskačev - nastavitev kota agregata - pnevmatsko gibanje vreten - hkratna obdelava 2 sekcij - globina utorov do 25 mm - podpore letve Gjdpfx Aaoy Tivbs Uouc - nastavitev oscilacijskega gibanja svedrov - nastavitev hoda pomika - avtomatska zaustavitev - naklon od 90 stopinj (navpično) do 0 stopinj (vodoravno) - glavni motor 1,1 kW - oscilacijski motor 0,75 kW - delovni tlak 6-8 bar - dimenzije dolžina/širina/višina 4020x1150x1400 mm - teža približno 480 kg PREDNOSTI – za proizvodnjo oken – oscilacija – pnevmatski pritiskači – nelakirana – italijanska proizvodnja – rabljeni stroj, zelo dobro stanje Cena brez DDV: 13.900 PLN Cena brez DDV: 3.300 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22702018968, lastna masa: 4.000 kg, največja dovoljena obremenitev: 23.000 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2016, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, The images are archive photos! The vehicle may currently be in use! 2-Axle Flatbed Semi-Trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Permissible/Technical Gross Weight: 27,000 kg Permissible/Technical Payload approx.: 23,000 kg Permissible/Technical Axle Load: 16,000 kg Permissible/Technical Fifth Wheel Load: 11,000 kg Unladen Weight approx.: 4,000 kg +/- building tolerance Godpfx Aey Rxmwea Usuc Overall length approx.: 13,850 mm Max. overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consisting of: Chassis - semi-trailer for transport logistics Fine grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with “Load-Lock Profile” for securing lashing straps. Notice: To attach the straps in combination with sideboards, the sideboards must be opened! 14 pairs of lashing rings, each rated for 2.5 t 24 t two-speed support winch, one-sided operation, with straight lower part, without compensating device Without landing legs Wheel chocks with holder Aluminium side underrun protection, Steel rear underrun protection Quarter shell mudguards Axles & Suspension SAF disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by vehicles that ensure full ABS functionality! With raising/lowering valve Vehicle stability control system Wheels and Tires 385/55 R19.5" – Make as per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white front position lights, protected with round iron 2 white/red lane marker lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor Anti-slip phenolic boards approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point-load resistance, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Posts 25 mm aluminium hollow profile, approx. 1,350 mm high, steel corner posts in volume version, with “holes” for forklift drivers Approval / Plates Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line number plate holder Warning plate according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paint Frame: RAL 3002 carmine red Support legs: black coated The images are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 10.237 h, nosilnost: 4.500 kg, dvižna višina: 3.880 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 2.600 mm, moč: 53 kW (72,06 KM), proizvajalec motorjev: Deutz, vrsta prenosa: hidrostat, dolžina vilic: 1.800 mm, lastna masa: 6.412 kg, skupna višina: 2.600 mm, barva: oranžna, model motorja: BF 4M 1012E, Oprema: bočni pomik, kabina, nastavljiva roka, osvetlitev, spojka prikolice, sprednja zaščita, vilice za palete, Forklift truck: + Still Gujdpfowqc Tbex Aa Ujc + R70 45 + Year of manufacture: 2005 + 10,237 operating hours + Deutz diesel engine, BF 4M 1012 E, 72 hp + Own weight: 6,412 kg + Lifting capacity: 4,500 kg + Overall height: 260 cm + Fork length: 180 cm + Lift height: 388 cm + Sideshift + Hydraulic fork adjustment + Full cabin with heating and work lights + Amber beacon + Forklift from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Stanje: novo, Prodajam profesionalni nosilec za zračno dihalno napravo Dräger PSS 7000 Gedpfx Aajy Ilvgj Ueuc • Model: PSS 7000 • Manometer: do 300 bar • Part No: 3355850 • Type No: 3355068 • Tehnično stanje: dobro • Komplet pasov in zaponk • Trden okvir brez razpok Prodajam točno to, kar je na slikah. Brez jeklenke in maske. Oprema za gasilce – najvišja serija Dräger.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 750 Ah, napetost baterije: 80 V, skupna višina: 627 mm, skupna dolžina: 1.026 mm, skupna širina: 996 mm, Tested forklift battery for your forklift – 80V 6PZS 750Ah – DIN A Gujdpsy Rnp Isfx Aa Ujc + 1 year warranty + Incl. aquamatic watering system + Incl. end cell connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Suitable for the following models, among others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available on request. Transport possible.

Stanje: rabljeno, prevoženi kilometri: 10 km, moč: 88 kW (119,65 KM), prva registracija: 02/2026, vrsta goriva: dizel, lastna masa: 1.721 kg, skupna masa: 2.830 kg, medosna razdalja: 3.275 mm, naslednji pregled (TÜV): 02/2028, barva: bela, emisijski razred: Euro 6, število sedežev: 3, prostornina tovornega prostora: 5,6 m³, dolžina tovornega prostora: 2.512 mm, širina tovornega prostora: 1.636 mm, višina nakladalnega prostora: 1.397 mm, gradbena višina: 1.895 mm, delovna širina: 2.010 mm, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, tempomat, Air conditioning, central locking with remote control, electric exterior mirrors, electrically adjustable and heated exterior mirrors – electrically foldable, electric front windows with anti-pinch protection, onboard computer, Hill Start Assist (HSA), emergency brake assist, traffic sign recognition, driver fatigue detection sensor, cruise control, steering wheel audio controls, front and rear parking assistance with side sensors, reversing camera with 180° surround view, full partition wall in the load compartment, spare wheel with matching tyres, summer tyres, light sensor, rain-sensing wipers, light and visibility package, automatic headlight activation including high-beam assist, daytime running lights, fog lights, DAB tuner (digital radio), infotainment system: IVI MID with 10-inch touchscreen – DAB – Bluetooth interface, Bluetooth hands-free system, USB interface, Apple CarPlay, Android Auto, tyre pressure monitoring system, heat-insulating glazing, driver airbag, driver and passenger airbags, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, centre armrest, driver comfort seat with armrest and lumbar support, start/stop system, diesel particulate filter, full service history, right-hand sliding door, immobiliser, driver assistance system: blind spot assist, headlight range adjustment, outside temperature display, power steering, wooden load floor with standard side panelling, surround view package, two 12V power sockets, city package, digital instrument cluster (10.0 inch), double front passenger seat with storage compartment, two folding vehicle keys, seatbelt warning system – driver and passenger side, 12V socket in boot/load area, 12V socket in the centre console, tie-down points in load area, autonomous emergency brake assist, brake assist, lane departure warning, wheel hub covers, adjustable steering column, visibility package, body variant: vehicle length L2, halogen headlights, automatic headlight activation, high beam assist, wipers with interval function, safety system with automatic emergency call (ERA GLONASS / eCall), speed-dependent power steering, SCR system (AdBlue technology), body/type: box van, drive type: front-wheel drive, wheelbase 3275 mm, 6-speed gearbox. Over 150 transporters and buses in stock. Financing or leasing available via Santander Consumer Bank, Targo Bank, or Auto Europa Bank – we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed features may need to be checked separately. Subject to change, error, and prior sale. Delivery available at extra cost. Export license plates available on site. Trade-in of your old vehicle possible. Retrofit options available for: – tow bars (up to 3500 kg) – auxiliary heaters – display for reversing camera and/or navigation via smartphone (Android Auto) – rear view systems with rear camera – workshop fittings – cruise control – tail lift (LBW) retrofit and other bespoke solutions for your business needs available at extra cost. Guodsy Umayjpfx Aa Uec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, MAKA BC 150t compact, used machine 5-axis CNC machining center for processing aluminum and plastic. Gantry-type bridge construction with 4 columns, 2 x aggregate carriers. Technical Data: Working areas in 5-axis operation, with tool Ø 160 mm / tool length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm (with 180 mm fixture height) Linkable tables for machining large parts. Extended travel stroke for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotary axis 540° / Swivel axis 196° (+/- 98°) Table design: - 2 x aluminum surface tables, size 2,500 x 1,500 mm - Threaded bushings M10 and centering pins in the tabletop - 3 x vacuum clamping circuits per table - 3 x pneumatic clamping circuits per table Milling units: - 2 universal aggregates for 5-axis milling, with 50° angle head, HSK F63 tool holder, max. power 12.5 kW (S1), infinitely variable speed up to 24,000 rpm, water-cooled milling spindle - 1 NC height-adjustable chip extraction system per milling unit, with lamella curtain Tool changer: - 2 x rotary disc tool magazines with 20 positions each Control system: - 1 x Siemens SINUMERIK 840D SL machine control - 1 x Siemens OP 19 PCU operator panel with 19" display, full keyboard, membrane keypad - 1 x additional Siemens HT 8 portable handheld operating unit with 7.5" touchscreen, version with manual pulse generator Safety equipment: - 1 soundproof enclosure - 2 automatic loading doors with viewing windows - Loading and unloading areas safeguarded by light barriers and bumpers on the tables Measuring probes: - 2 x 3D radio measuring probes, HSK F63 interface, for automatic changing from the tool magazine Minimum quantity lubrication: - 2 minimum quantity lubrication units - 2 spray nozzles per milling unit, individually controllable via M-function Table air blow-off system: - 2 x air knife table blow-off systems for cleaning the tables during traverse out of the machining area (limited in coupled operation) Gsdpfjtq Hkrsx Aa Usuc The machine is installed and can be inspected in 89568 Hermaringen.

Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with integrated control cabinet in the machine base frame. CNC control unit BWO 900C, 1 MB memory, with integrated PC. Technical Data: Working areas / travel dimensions: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm (with fixture height 120 mm) A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y-axis: 45 m/min Z-axis: 15 m/min A/B-axis: 10,000 °/min 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed control from 2,000 – 24,000 rpm, nominal power from 12,000 rpm. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face. Gusdpoir Aq Tjfx Aa Uec Aluminum table plate 1,000 x 1,000 mm with grid bores 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioner. Occupational safety: Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top. Connections: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale With forward/reverse rotation The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately 380 V, 5500 W, with motor circuit breaker for overload protection Gsdsy Rh Nzepfx Aa Ueuc Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, on request Godpfx Aofxgmgoa Usuc

Stanje: rabljeno, Leto izdelave: 1992, s Centrofix-skobelno gredjo Stroj očiščen, popolnoma pregledan Mize izmerjene – zelo natančno nastavljene, max. 5/100 mm Preizkusno skobljanje Rabljeno, dobro stanje, malo rabljeno Proizvajalec Maka Tip AH 430 Leto izdelave 1992 Serijska št.: 9201531 GS-pregled za lesni prah Motor 3,0 kW Upravljalna plošča zgoraj Širina skobljanja cca 430 mm Dolžina prihodne mize cca 1500 mm Dolžina odvodne mize cca 1200 mm Nihajno varovalo Utori/utišane mizne letvice Število nožev: 4 kosi Centro Fix-noževna gred Nastavitev mize z ročnim kolesom Samodejna zavora Priključek za odsesavanje D 140 mm Gedpfx Aoxuv Rrsa Uouc Potrebni prostor cca 2700 mm x 1200 mm x 1400 mm Teža cca 800 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva

Stanje: rabljeno, Leto izdelave: 1991, obratovalne ure: 648 h, moč: 14 kW (19,03 KM), Oprema: ABS, kabina, pogon na vsa štiri kolesa, sprednja priključna naprava, John Deere 670 Yard Tractor * stepless rear PTO * front linkage * front hydraulics * rear three-point linkage * selectable all-wheel drive * pivoting snow blade Technical data: * Engine: Yanmar 3-cylinder diesel * Power: 14.4 kW * Displacement: 0.9 l * Weight: approx. 843 kg * Maximum speed: approx. 16.7 km/h Godpfx Ajy Skl Uoa Ueuc * Front tires: 6-12 * Rear tires: 9.5-16 * Dimensions (length): approx. 2.76 m Special features: * Compact design * Economical and durable Yanmar engine * Versatile (yard, stable, green spaces) ----Vehicle number: 12033----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle; simply let us know your wishes and suggestions, and we will take care of them. Among other services, we can offer you the following at additional cost:----Trade-in of your old vehicle TÜV/SP inspection Complete export handling Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and transport services----YOUR VTS TEAM

Stanje: rabljeno, Leto izdelave: 1992, s Centrofix - nožna gred brezstopenjski podajalnik 2x izhodni valj Očiščen, podmazan, delno obnovljen Popolnoma nastavljen, preizkusno skobljanje, Godpfxsxuv N Ij Aa Ueuc Novi deli: digitalni prikazovalnik, distančni obroči, podloga, priključna doza Rabljeno, dobro stanje, vrhunska oprema Proizvajalec: Maka Tip: DH 630 A Leto izdelave: 1992 Št. stroja: 9201891 GS-testirano na lesni prah Motor: 6,7 kW Širina skobljanja pribl. 630 mm Višina skobljanja pribl. 300 mm Namizni drsni valj: 1 kos, nastavljiv Segmentni pritisni nosilec Segmentni vstopni valj 2 jeklena izhodna valja Podajalna hitrost: 0-21 m/min, brezstopenjsko Število nožev: 4 Sistem nožev: Centro-Fix – obojestranski noži Digitalni prikazovalnik višine skobljanja Električna nastavitev višine z ročnim fino nastavljanjem Priključek za odsesavanje D 150 mm Prostor potrebščin pribl. 1200 x 1200 x 1400 mm Teža pribl. 1000 kg Lokacija skladišča: 97447 Gerolzhofen, naloženo, brez embalaže Predaja v videnem stanju, brez garancije in jamstva.

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 10857, Total pressing force: 315 t Gsdpsvmfzbjfx Aa Uouc Stroke: 1100 mm Installation height: 2200 mm Table clamping surface approx.: 2500 x 1000 mm Ram clamping surface approx.: 2500 x 1000 mm Maximum tool weight on ram: 6000 kg Rapid traverse down: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s Power requirement: 158 kW Machine weight approx.: 44 t Height above floor level approx.: 6175 mm Automation

Stanje: rabljeno, Leto izdelave: 1999, Dowel hole drilling unit: pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Guedpfxev S Diuo Aa Uec Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 1.645 mm, pomik osi Y: 1.760 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D s, največja hitrost vretena: 18.000 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, Ta 3-osni MAKA DC 3 je bila izdelana leta 2016. Ima območje hitrosti vretena do 18.000 vrt/min in impresivne hode osi: 1645 mm po osi X, 1760 mm po osi Y in 600 mm po osi Z. Stroj ima velikost mize 1200 x 1400 mm in orodjarno s kapaciteto 24 orodij. Če iščete visoko kakovostne možnosti obdelave, razmislite o vertikalnem obdelovalnem centru MAKA DC 3, ki ga ponujamo v prodajo. Kontaktirajte nas za več podrobnosti. • Velikost mize: 1200 × 1400 mm Tehnične specifikacije Stožec SK 40 Guodpfxsyycdlj Aa Uec

Stanje: zelo dobro (rabljeno), Kataloška številka 7732 TEHNIČNI PODATKI Guodpsyfhiijfx Aa Ujc - pritisna sila: hidravlična - oblika briketa: okrogla - premer briketa: 70 mm - premer rezervoarja: 1200 mm - zmogljivost: približno 70 kg/h - samodejno delovanje stroja - motor: 7,5 kW - maksimalni delovni tlak: 150 bar - priključek za odsesavanje: 90 mm - premer odprtine za filtrirno vrečo: 500 mm - maksimalna višina vreče: 900 mm - dimenzije d/š/v: 1950x1400x2700 mm - teža: 1130 kg PREDNOSTI – italijanska proizvodnja – možnost neposredne priključitve odsesavanja žagovine – rabljena briketirka – DTR dokumentacija – zelo dobro stanje Neto cena: 29.900 PLN Neto cena: 7.120 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension Gusdpfxei Riw Ao Aa Uoc SAF drum brake axles Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 From leading manufacturers Twin steel rims, factory silver Braking system 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: dober (rabljeno), Leto izdelave: 1990, Namizni rezkar z napajalom Vreteno je nastavljivo pod kotom z obojestranskim podaljškom mize Guodpfx Aasyy I R Ro Ujc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 700 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, skupna višina: 2.600 mm, skupna širina: 1.800 mm, obremenitev mize: 160 kg, skupna masa: 5.600 kg, največja hitrost vretena: 12.000 obr/min, največja dolžina izdelka: 2.630 mm, število osi: 3, This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It offers an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine features a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking for high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining center we are offering for sale. Contact us for further details. • Table: 700 × 400 mm Gsdpjyvip Tjfx Aa Usuc • Spindle: 12 HP (max. 15 HP); cooling: air, through-spindle coolant (CTS), and external coolant system • Rapid traverse (X/Y/Z): 48 / 60 / 72 m/min • Accuracy: positioning 0.012 mm; repeatability ±0.005 mm • Tool changer: 24+1 servo-driven; max. tool diameter 75 mm; max. tool length 200 mm; max. tool weight 4.5 kg • Tool change times: tool-to-tool 1.9 s; chip-to-chip 3.4 s • Control: AKIRA Mi:845 (FANUC G-Code compatible) • General data: coolant tank 150 L; power requirement 25 kVA; required air pressure 0.5 MPa • Application: suitable for light-duty machining, especially of non-ferrous metals and composites Additional equipment • Dual pallet system (APC) Technical Specification Taper Size HSK 63

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 70 linear meters pallet racking SSI Schäfer Palflex incl. mesh shelves Used equipment, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Frames galvanized Beams red Mesh shelves included! 2 meshes per 2.7 meter beam length Asking price: €8,290 net ex stock Scope of offer: + 26 pcs. pre-assembled frames, depth 120 cm, height approx. 4 m + 100 pcs. beams, length 2.7 m, 1,500 kg shelf load per compartment with evenly distributed load + 200 pcs. locking pins + 100 pcs. galvanized mesh shelves for 50 levels à 2.7 m beam length + 104 pcs. concrete anchors + Load capacity signs Gsdpfxjkx E I Ns Aa Ueuc Goods in stock. Transport and installation available on request. Inspection possible at any time by prior arrangement. Further information on request. Constantly over 5,000 linear meters pallet racks in stock from various manufacturers. (Subject to changes and errors in technical details, information and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly seeking and offering numerous items from various sectors - broom-clean clearances - business liquidations - Fast - flexible - efficient! We also clear out or dispose for liquidators. Contact us briefly, we will get back to you immediately. To visit our website, please click on our logo!

Stanje: rabljeno, Leto izdelave: 1999, Used Machine MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn parts. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Design / Version: Gantry-type machining center with 2 aluminum tables Axis Information: Axis: Size / Travel Distance / Speed X-axis: 2,750 mm / 40 m/min Y-/V-axis: 2,400 mm / 40 m/min Z-axis: 700 mm / 15 m/min Rotary axis: 540° / 10,000°/min Swivel axis: 200° / 10,000°/min Godev S Ut Dopfx Aa Ueuc Machine Connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35°C Compressed air pressure: 6 bar Working areas / Workpiece cube size: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm Specified values are based on a fixture height of 170 mm / tool length 60 mm. 1 Equipment 1.1 Table Design 2 aluminum surface tables with threaded bushings for clamping, each 1,000 x 1,000 mm in size. Tables can be coupled for processing large components. Both table plates additionally receive threaded bushings and locating bushings (or dowel pins) for accepting the customer’s milling fixture as specified. 1.2 Vacuum supply Machine is equipped with a vacuum system. 1 vacuum pump 1.3 Clamping system 1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-connect couplings mounted to the machine table. 1.4 Milling unit: 1 pc. DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotary axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis drives Ball screw in X-, Y-, and Z-axes; A/B-axes with hollow-shaft drives. 1.6 Operator safety One automatic sliding door per table. Including safety cabin. 1.7 Control system 1 pc. BWO 900 machine control, with 1 pc. BWO 900C operating panel mounted on a mobile operator's console. 1.8 Power supply Machine is designed for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine power supply is not permitted. 1.9 Country specification Technical machine documentation in German. Consisting of: - Operating manual for the machine - Operating manual for the control system - Wiring diagrams for electrical and pneumatic systems - Control language in German.