Kk-Industries Cy 70-10/1.5 Without Motor nakup rabljenega (86.511)

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Guedpowzzzfjfx Ab Esh Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: rabljeno, prevoženi kilometri: 170.927 km, moč: 55 kW (74,78 KM), prva registracija: 02/2020, vrsta goriva: dizel, skupna masa: 1.897 kg, naslednji pregled (TÜV): 02/2028, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, dolžina tovornega prostora: 1.888 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, klimatska naprava, Prosimo, pokličite nas tudi preko aplikacij WhatsApp/Viber. E-pošta: Gedoz E T E Ejpfx Ab Ejuh Dacia Dokker 1.5 DCi. Glavna oprema vključuje: Bluetooth, multimedijski sistem, ročno upravljanje klimatske naprave, centralno zaklepanje, električna ogledala in stekla itd.

Stanje: rabljeno, prevoženi kilometri: 161.560 km, moč: 55 kW (74,78 KM), prva registracija: 02/2020, vrsta goriva: dizel, skupna masa: 1.897 kg, naslednji pregled (TÜV): 02/2028, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, dolžina tovornega prostora: 1.888 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, klimatska naprava, Prosimo, pokličite nas tudi preko aplikacij WhatsApp/Viber. E-pošta: Gusdpfsz E T Exjx Ab Eoh Dacia Dokker 1.5 DCi. Glavna oprema vključuje: Bluetooth, multimedijski sistem, ročno upravljanje klimatske naprave, centralno zaklepanje, električna ogledala in stekla itd.

Stanje: zelo dobro (rabljeno), Vötsch VTS 7027-10 temperaturni preskusni omara Proizvajalec: Vötsch Industrietechnik GmbH Tip: VTS 7027-10 Tip naprave: Temperaturna preskusna omara / Omara za temperaturno testiranje Prostornina preskusne komore: približno 270 litrov Naprodaj je rabljena Vötsch VTS 7027-10 temperaturna preskusna omara s programirljivim upravljalnikom na dotik. Gujdjz A A Ecjpfx Ab Eeh Naprava je primerna za profesionalna temperaturna testiranja, simulacijo okoljskih razmer, testiranje materialov, testiranje elektronike in komponent, zagotavljanje kakovosti ter razvojne, staralni in obremenitvene teste. Tehnični podatki: Temperaturno območje: -70 °C do +180 °C Hitrost spreminjanja temperature (ogrevanje): približno 10 K/min Hitrost spreminjanja temperature (hlajenje): približno 14,5 K/min Časovna odstopanje temperature: ±0,3 do ±0,8 K Prostorsko odstopanje temperature: ±0,5 do ±2 K Prostornina preskusne komore: približno 270 litrov Hladilno sredstvo: R404A / R23 Količina hladilnega sredstva: 8 kg / 2,1 kg Priključna napetost: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 14 kW Nazivni tok: 26 A Hlajenje: Izvedba s hladilom Na voljo je dovod in odvod hladilne vode Dimenzije: Notranje mere (Š × G × V): približno 580 × 620 × 750 mm Zunanje mere (Š × G × V): približno 870 × 1.895 × 1.775 mm Oprema: Programirljiv upravljalnik na dotik S!MCON/32-NET sistem za nadzor, spremljanje in regulacijo Notranjost iz nerjavečega jekla Veliko okno za opazovanje Osvetlitev preskusne komore Stranske odprtine za testirane vzorce Rešetke iz nerjavečega jekla Nastavljiv omejevalec temperature Programska omejitev temperature Vmesnik RS232 Hladilna enota, hlajena z vodo Transportni podatki: Dimenzije (Š × G × V): približno 870 × 1.895 × 1.775 mm Teža glede na tehnično dokumentacijo, brez dodatne opreme: približno 835 kg Transport z viličarjem ali podobnim dvigalom Stanje: Rabljeno / Used Vizualno stanje glede na slike. Obseg dobave: Vötsch VTS 7027-10 temperaturna preskusna omara Upravljalnik na dotik Vložki iz nerjavečega jekla glede na slike Dodatna oprema glede na slike Razpoložljivost: po dogovoru. Obseg dobave je tak, kot je prikazano na sliki. Pridržujemo si pravico do sprememb, napak in prodaje.

Stanje: rabljeno, prevoženi kilometri: 190.774 km, moč: 55 kW (74,78 KM), prva registracija: 02/2020, vrsta goriva: dizel, skupna masa: 1.897 kg, naslednji pregled (TÜV): 02/2028, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, dolžina tovornega prostora: 1.888 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, klimatska naprava, Prosimo, pokličite nas tudi preko aplikacij WhatsApp/Viber. E-pošta: Gujdpfxjz E T Els Ab Ejh Dacia Dokker 1.5 DCi. Glavna oprema vključuje: Bluetooth, multimedijski sistem, ročno upravljanje klimatske naprave, centralno zaklepanje, električna ogledala in stekla itd.

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Upper roll diameter: 210 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Upper roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 Gujdpfxod Ab Tke Ab Eeh We have many references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Technical Data: - Rear roll motorized drive - Conical bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and lower rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Guodod Ab N Espfx Ab Ejh Options: - Top roll driven by electric motor EURO 1,166 - Digital display for rear roll position EURO 1,010 - Hardened rolls EURO 827 - Special voltage EURO 480 - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 13 mm Top roller diameter: 270 mm Sheet length: 2600 mm Technical specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rollers mounted on bearings - Top roller cover, hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Guedsd Ab Tdjpfx Ab Ejh Options: - Variable rotation speed EURO 4,682 - Sheet feeding table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 6,690 We have many references!

Stanje: novo, Sheet thickness: 70 mm Bending length: 2100 mm Top roll diameter: 540 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital readout for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically driven - Movable control panel - Compliant with CE standards Options: - Variable rotation speed EURO 6,940 - Material feed table EURO 5,100 - Oil cooler STD. - Central support EURO 19,500 - Side supports EURO 10,400 - Automatic material extractor - PLC control - CNC control Guedpfsd Ab N Sex Ab Esh - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 16 mm Top roll diameter: 270 mm Technical specifications: Godpfx Aod Ab Tfeb Esuh - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rollers mounted with bearings - Upper roll cover hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Side movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 5,700 We have many references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 8 mm Upper roller diameter: 210 mm Technical specifications: Godpod Ab Tljfx Ab Eeuh - Hardened and polished rollers - Full body made from ST-52 steel - Conical bending device - Digital readout for side rollers - Portable control panel - Rollers mounted on bearings - Upper roller cover hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 We have numerous references!

Stanje: novo, Bending length: 4100 mm Sheet thickness: 6 mm Top roll diameter: 270 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel Gedpfod Ab Tbsx Ab Eouh - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Sheet feeding table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 9,660 We have numerous references!

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg Gusdpfxsziizys Ab Ejh For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: novo, KSB potopna črpalka UPA 150S-12, črpalka, 1,5 kW Guedpfx Abeiu U Exe Esh KSB potopna črpalka UPA 150S-12, 1,5 kW Če sodimo po videzu, je črpalka nova, vendar ima sledove uporabe. Zdi se, da so miši poškodovale kabel (glejte slike). Druga slika prikazuje črpalko, ki je še vedno v originalni embalaži in jo ponujam v drugi ponudbi. Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodne stroške pošiljanja dobite na zahtevo!

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust design CNC axes: Y1, Y2, X and R axis CNC crowning device, motorized, with CNC control CNC controller Original DELEM DA-58T, 15” touchscreen Backgauge with linear guide and ballscrew, with 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tool Upper tool system: Promecam Amada segmented gooseneck die Multi-V die system; both Promecam and Amada systems possible Gjdpfx Ajttxh Nob Eouh CE safety equipment

Stanje: novo, Pressing force: 40 Bending length: 1600 mm Distance between uprights: 1980 mm Motor power: 4 kW Ram stroke, max.: 150 mm Maximum opening: 370 mm CNC press brake 40x1600, 4 axes Y1-Y2-X-R with CNC crowning Technical parameters: Nominal press force: 63 kN Bending length: 1600 mm Distance between columns: 1980 mm Throat depth: 250 mm Ram stroke: 150 mm Maximum opening height: 370 mm Ram descent speed: 180 mm/s Ram return speed: 150 mm/s Ram operating speed: 15 mm/s Main motor power: 4 kW CNC system: ZY68 Number of control axes: 4+1 Oil tank capacity: 90 L Back Gauge (X Axis): Godpfxowacq Ee Ab Eeuh X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repetitive positioning accuracy: ±0.015 mm Motor power: 0.85 kW R-Axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repetitive positioning accuracy: ±0.015 mm Dimensions and weight: Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Additional motor power: 0.85 kW

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 12 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency, premium-standard laser cutting machine, supporting laser power up to 30,000 W—making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large-scale machines and installations. It is an ideal cutting solution for those looking to outsource. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. The standard nesting software program prepares parts for cutting extremely quickly and without manual intervention. Flycut function is also available. Featuring a double exchange table, the machine enables continuous cutting without downtime. All our machines are manufactured to European standards and CE certified. Our FLC models feature nozzle cleaning and dual camera system. Available cutting formats: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active anti-collision, and an auto-view function, which detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridge used on all machines is a single-piece, welded construction made of aluminum alloy plates. The monolithic structure ensures rigidity and prevents deformation from impacts, overlaps, or stresses, while its weight—three times lighter than steel-type bridges—enables high speed and acceleration with lower motor power requirements. Accessories included: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Fly cutting - Nozzle and lens starter kit - Scrap drawers for cut parts - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training Gujdpfxoruwb Ae Ab Eeh - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical specifications: - Back roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Movable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 - Digital display for back roll position EURO 1,010 Guedpfx Ajd Ab Nyob Esh - Hardened rolls EURO 799 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Pressure: 20 Bending length: 900 mm Frame width: 900 mm Installation height: 325 mm Stroke length (max.): 150 mm Guedsd H Hh Depfx Ab Esh Dimensions (LxWxH): 1760 x 1280 x 2190 mm Approx. weight: 1950 kg Motor power: 3.8 kW Electric ball screw CNC press brake KK Industries Model REVOLUTION B-Servo 900 mm x 20 t Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake, KK-Industries made by DENER: Technological Advantages: Model REVOLUTION B-Servo 900 mm 20 t - High speeds with ball screw drive - The CNC servo electric press brake stands out for its high precision, accuracy, and versatile application possibilities - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B): 900 mm Bending Capacity (Pressing force): 20 tons Maximum Stroke: 150 mm Daylight Opening (Q): 325 mm Approaching Speed: 150 mm/s Bending Speed: 20 mm/s Return Speed: 150 mm/s Power: 3.8 kW Weight: 1950 kg Overall Length (A): 1760 mm Width (C): 1280 mm Height (D): 2190 mm KK-Industries GmbH There's something for everyone!

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Gujdjttc Upopfx Ab Esh Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Punching force: 65 t Gujdpfx Aottc Utsb Eeh Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT7062-5WK71-1FH1 sinhronski motor SN: YFF9620520811003, strokovno popolnoma obnovljen in preizkušen, z 12-mesečno garancijo, 100% delujoč, dobava kot na slikah. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Prosimo, povprašajte za ceno posebej! Gsdpsx Duzzofx Ab Eouh

Stanje: novo, Pressure: 40 Bending length: 1300 mm Frame gap: 1300 mm Installation height: 375 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1880 x 2435 x 2320 mm Weight approx.: 3400 kg Motor power: 2 x 3.8 kW electric ball screw CNC press brake KKI Model REVOLUTION B-Servo 1550 mm x 40 t Standard equipment: KK-Industries is the general representative of the DENER Group. We have assembled a high-quality model for Europe. The CNC servo-electric press brake from KK-Industries, made by DENER, offers technological advantages: Model REVOLUTION B-Servo 1550 mm 40 t High speeds with ball screw drive The CNC servo-electric press brake stands out for its high precision, accuracy and versatile applications - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length 1550 mm Bending Capacity (Press force) 40 tons Maximum Stroke 150 mm Daylight Opening (Installation height) 375 mm Approaching Speed 150 mm/s Bending Speed 20 mm/s Return Speed 150 mm/s Power 2 x 3.8 kW Weight 3400 kg Overall Length (A) 1880 mm Gusdpfxed H Hh Ho Ab Esh Width (C) 2435 mm Height (D) 2320 mm KK-Industries GmbH There's something for everyone!

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 58226018400020, Weiss Temperature Chamber Model: WT11-270/70/10 Serial No.: 58226018400020 Controller: Simcon/32-NET Version: 00.1902 Ports: Left side (2x) NW 50 mm, Right side (3x) NW 125 mm Temperature Range: -70°C to +180°C Test Chamber Volume: 270 liters Door with window, internal lighting Temperature chamber – water cooled Compressed Air Dryer Type: ZANDER Gjdpfjv T Tncsx Ab Eeuh Temperature Change Rate – Cooling: 10 K/min Temperature Change Rate – Heating: 10.0 K/min Temporal Temperature Deviation ±0.1 to ±0.5 K Spatial Temperature Uniformity ±0.5 to ±2.0 K Internal Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Overall Dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated Power: 14 kW Rated Current: 26 A Refrigerants: R-404A / R-23

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT7102-5WF70-1FH1 motor SN:YFS5621810501001 KOT NOV!!! Motor je bil za testne namene enkrat priključen, rabljen, dobro ohranjen, 100 % delujoč, dobava skladno s fotografijami. Godpezaygpofx Ab Ejuh