Engel E-Max 200/100 M. Geku Robot- Reinraum nakup rabljenega (115.641)

Stanje: rabljeno, prevoženi kilometri: 108.050 km, moč: 120 kW (163,15 KM), prva registracija: 01/2020, vrsta goriva: dizel, skupna masa: 5.000 kg, barva: črn, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 6.946 mm, skupna širina: 2.135 mm, skupna višina: 2.451 mm, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 2.100 mm, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, Internal vehicle no.: 8969 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide, Always over 400 vehicles immediately available, Largest selection – Best price, Over 1,000 satisfied customers per year – Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoker vehicle Full service history exclusively with Mercedes Benz Next service in 365 days Reversing camera Body: Deep-freeze box body Standby cooling + engine-driven cooling ThermoKing refrigeration unit V200 MAX Model 50 Refrigerants: R-404A/ R-452A Optional: Manufacturer refrigerated inspection available for only €899. Hydraulic tail lift “Bär” (750 kg) Partition wall in cargo area Rear portal doors Side door Rear entry assist ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multi-function steering wheel * 1 DIN slot at front under roof lining * 2nd battery (auxiliary battery) in cabin * Passenger-optimized gear console (without storage compartment, center console right) * Suspension: Stabilization stage II * Flip lid for storage compartment * Terminal strip for electrical connections (under driver's seat box) * Fuel filter with water separator * Radiator grille in vehicle colour Kodsw Eg E Depfx Ab Ajdl * Front engine PTO with mount for additional refrigeration compressor * Windscreen wipers with rain sensor * Front mud flaps * Cab seats: Front passenger double bench * Cab seats: Comfort air-sprung driver’s seat * Additional separation relay for 2nd battery * Rear wall trim * Fleece battery 92 Ah Standard equipment: Storage compartment above windscreen, storage compartment below passenger-side dashboard, rear towing eye, adaptive brake light, driver airbag, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, washer fluid level indicator, both external mirrors electrically adjustable and heated, outside temperature display, cab roof lining, automatic headlight activation, electronic brake-force distribution (EBV), electronic stability program (ESP), driver assistance system: Active Brake Assist, driver assistance system: Crosswind Assist, driver assistance system: Lane Keeping Assist, digital tachograph (download capable), 2x electric windows, 6-speed manual gearbox (Eco Gear), body/chassis: platform body, keyless start, communication module (LTE) for digital services, main fuel tank: 71 L, mechanically adjustable steering column, headlight range adjustment, truck registration, lateral marker lights, Mercedes-Benz emergency call system, engine: 2.1L – 120 kW CDI CAT, particulate filter, wheelbase: 4325 mm, low-emission according to Euro 6, driver seatbelt warning system, seat covers/upholstery: fabric, cab seats: driver’s seat with armrest, start/stop engine system, daytime running lights, rear underrun protection, DAB radio pre-installation, maintenance interval display (Assyst), immobilizer, heat-insulating glazing (windscreen with top band filter), central locking with remote, permitted gross vehicle weight: 5.00 t. ----New MOT/Emissions test on request. ----Warranty & "TÜV Profi Check" of course available from us! We are happy to accept your vehicle as trade-in! We can also provide you with a tailored financing or leasing offer! No down payment required, can be paid off at any time with special repayments. Ready for delivery.

Stanje: rabljeno, CNC control system, numeric control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots – 12 modules installed Kdedpfx Absflrtxs Aol Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output Card 2 pieces 0.651.708-57.3 I32 Input Card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position Control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial Interface 1 piece 0.651.974-23.2 ABS Termination Card 1 piece 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 1.496 h, vpenjalna sila: 600 kN, premer vijaka: 35 mm, Vbrizgalna enota Premer polža: 35 mm Zatezna enota Zatezna sila: 600 kN Ksdpfxsx D Dkxe Ab Asdl Ta stroj Engel Victory 200/60 TECH je bil izdelan leta 2003. Ima premer polža 35 mm, zatezno silo 600 kN in gib odpiranja 450 mm. Stroj vključuje robota in ima največjo razdaljo med ploščama 700 mm. Če iščete visokokakovostne zmožnosti brizganja plastike, razmislite o stroju Engel Victory 200/60 TECH, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Vrste uporabe Brizganje plastike

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING1+11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.050 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.050 mm, razmak osovin: 1.900 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 7.000 kg, Oprema: dvostranski, OHRA K60K - Double-sided Cantilever Rack for Long Goods / Heavy-Duty Rack Rack available 2x!!! 12 uprights - 48 cantilever arms K60K Height: 3.05 m - Uprights IPE200 - Upright spacing: 1.9 m (center to center) Total depth approx. 2.15 m (double-sided) Arms: 90 cm - IPE100 Load capacity per arm: 1000 kg Load capacity per upright: 7500 kg Kdedjv Smk Iopfx Ab Ajl Including wooden inserts Very good condition, see photos Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 18.000 mm, skupna širina: 2.000 mm, skupna višina: 3.000 mm, razmak osovin: 1.500 mm, nosilnost na stojalo: 7.000 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Cantilever racking, long goods rack, heavy-duty racking – double-sided Kjdpfx Ajv Smr Sob Asdl Consisting of 13 uprights + 52 cantilever arms Height: 3m – uprights: IPE200 – upright spacing: 1.5m center-to-center Total depth: 2m (double-sided) Arms: 90cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,000 kg Arms are infinitely adjustable Includes cross beams from arm to arm, includes wooden inserts Very good condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 33.526 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 220 cm³, Données techniques côté fermeture Force de fermeture : 1600 kN Entraxe colonnes (h x v) : 520 x 520 mm Dimension des plateaux (h x v) : 760 x 760 mm Hauteur de moule min. : 250 mm Hauteur de moule max. : 600 mm Ouverture max. entre plateaux : 1060 mm Course d'ouverture : 460 mm Course éjecteur : 150 mm Force éjecteur : 40 kN Poids max. du moule : 1250 kg Données techniques côté injection Diamètre de vis : 40 mm Volume de dosage : 220 ccm Pression d’injection : 2000 bar Rapport L/D de la vis : 20 l/d Course de vis : 175 mm Vitesse de vis : 420 min⁻¹ Débit de plastification : 33 g/s PS Débit en jet libre : 224 g/s PS Nombre de zones de chauffe : 4 Course buse : 305 mm Dimensions & poids Kjdpfoyk T I Uox Ab Aedl Dimensions machine (L x l x H) : 5,9 m x 1,7 m x 2,2 m Poids total : 8400 kg Équipement Manuel à l’écran en allemand Tirant de noyau hydraulique 1x Unité tirant de noyau hydraulique Machine sans alimentation automatique Buse à fermeture d’aiguille commandée pneumatiquement Interface EUROMAP 63

Stanje: novo, največja dovoljena obremenitev: 36.245 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available immediately and on short notice, can be found on our website. Extract from the specification. Full equipment details available on request. Loading Area: * Loading area with hardwood floor and rear bevel approx. 1,000 mm x 8° Kdjdpfx Aoyvnfajb Asl * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for fastening straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspension, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tool kit Tyres: * Tyres: 435/50 R 19.5, brand of our choice * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via standardised EBS interface according to ISO 11992. For proper display, the truck must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction: * Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin connector as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding with a wheel blasting machine Second abrasive blasting with corundum for optimal coating adhesion * HRM metal plating of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of two-component finish, single-colour in RAL 3002 Carmine Red as per RAL system 841GL * Rear metal-coated and painted in RAL 9010 (Pure White) * Paint structure tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment: * Yellow-red air couplings on the galvanised connection bar at the front * 4 wheel chocks with holder * 2-inch king pin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the loading area, right-hand side * Galvanised folding supports under the rear loading area bevel * 9 pairs of stake pockets for insertable stanchions, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip sand coating painted on the centre beam * 1 INOX toolbox transverse under the loading area, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the loading area, for 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of transverse stake pocket rails mounted in the loading area, for insertable stanchions approx. 100 x 50 mm * Storage for max. 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the loading area, behind the axles * One beacon light supplied

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) Kedjyvnfgjpfx Ab Aedl * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Fanuc robot LR Mate 200iB + Fanuc sistem Krmiljenje robota, letnik 2004 Kodpfxexr Dbmo Ab Ajdl

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 500 kN, Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Kedpfx Aswv Ukieb Aodl Drive: Hydraulic Hours: 56,000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, nosilnost: 360 kg, doseg roke: 2.800 mm, proizvajalec krmilnikov: KUKA, model krmilnika: KRC2, Model KR360 je zasnovan za nazivno nosilnost 360 kg, da optimizira dinamično delovanje robota. Glavne uporabe: - Varjenje - Doziranje - Dodajna proizvodnja Model: KR360 (na voljo je tudi opcija L) Stanje: Rabljeno in testirano Leto: 2006 (na voljo so tudi druge opcije) Krmilna omara: KRC2 Vključeno: Manipulator + nadzorna omara KRC2 + vsi kompleti kablov + učni obesek – CELOTEN KOMPLET Kdodpfxew H Ny Hs Ab Ajl Za ponudbo in možnosti obnove nas prosim kontaktirajte. Kot PLC Merkezi EOOD imamo na zalogi več kot 300 robotov in delujemo z blagovnimi znamkami KUKA, ABB, FANUC in Motoman. (Vir: KUKA uradna stran)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, nosilnost: 150 kg, doseg roke: 2.700 mm, KUKA KR 150 je 6-osni industrijski robot, zasnovan za visoko precizne in hitre aplikacije. Z zmogljivostjo nosilnosti 150 kg in širokim delovnim dosegom zagotavlja zanesljivo delovanje pri nalogah, kot so varjenje, montaža, rokovanje in obdelava. Model: KR150-2 2000 Stanje: Rabljeno Leto: 2006 Vključeno: Manipulator + KRC2 + KCP2 Teachpendant + Kompleti vseh kablov Kdjdew Nat Iopfx Ab Aol Za ponudbo in možnosti obnove nas kontaktirajte. Kot PLC Merkezi EOOD imamo na zalogi več kot 300 robotov in sodelujemo z znamkami KUKA, ABB, FANUC in Motoman. (Vir: spletna stran Kuka)

Stanje: rabljeno, Number of spindles: 6 units Working width: 230 mm Planing height: 160 mm Jointing table length: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min Weinig Powermat 1200 --- with infeed automation Weinig wheel magazine EM 100, linked to outfeed automation Weinig High-Mech A 1 The machine is completely overhauled at our warehouse prior to delivery! Detailed description: --- 1. Weinig Planing and Moulding Machine Powermat 1200 --- Technical data: --- Working width: 20 - 230 mm (with tooling diameter 93 - 163 mm) Working height: 10 - 160 mm (with tooling diameter 93 - 163 mm) 1st spindle --- First lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 125 - 180 mm With PowerLock: 93 - 180 mm Tooling diameter for rebate cutters: 130-160 mm Axial adjustment: 17 mm Rebate device MarathonCoating in front of first lower tool holder 2nd spindle --- First right vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Maximum moulding depth: 35 mm Axial adjustment: 80 mm Radial adjustment Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence level: 200 mm 3rd spindle --- First left vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Tooling diameter for straight knife heads max.: 163 mm Maximum moulding depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left tool holder, includes 2 lateral pressure rollers, spring-loaded 4th spindle --- First upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Kjdpfxsvnwbcs Ab Aedl Tooling diameter: 93 - 200 mm Tooling diameter for straight knife heads max.: 163 mm Maximum moulding depth: 35 mm Axial adjustment: 40 mm Divided pressure shoe ahead of upper tool holder on tooling circle, adjustable, can be swung away from tool, spring-loaded. Upper spindle prepared for later installation of cassette system 5th spindle --- Second upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Tooling diameter for straight knife heads max.: 163 mm Maximum moulding depth: 35 mm Axial adjustment: 40 mm Divided pressure shoe ahead of upper tool holder on tooling circle, adjustable, can be swung away from tool, spring-loaded. Upper spindle prepared for later installation of cassette system 6th spindle --- Second lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 225 mm Maximum moulding depth: 15 mm Axial adjustment: 40 mm Radial adjustment Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm All spindles with high concentricity accuracy. Lubrication points for axial tool adjustment movement. Feed system --- Electronic feed, infinitely variable with brake 6-40 m/min, motor: 7 kW ...

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), A total of four Engel injection moulding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999. This machine is a defective unit used for spare parts. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation is available. An on-site inspection is possible. Individual sale is possible. Ksdev Extzspfx Ab Aedl

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljena brizgalna stiskalnica, vklj. robot SEPRO Proizvajalec: ENGEL Ksdpfx Asx Ddg Tjb Aedl Tip: e-motion 740/180 KL Leto izdelave: 2007 Zatezna sila: 180 ton Razdalja med ploščama: brez stebrov Premer polža: 45 mm Največja prostornina hoda: 318 cm³ Teža brizganega dela: 286 g/PS Krmiljenje: CC200 Oprema: - Robot, proizvajalec SEPRO - 2 x izvlečna palica za jedro - Izpihovalni ventil - Zaščitna ograja - Transportni trak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 1 used injection moulding machine Manufacturer: ENGEL Kedpfx Aou Eu Tneb Aedl Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tons Tie bar spacing: TIE-BARLESS Screw diameter: 25 mm Maximum shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1400 x 1100 x 1300 mm Weight: 200 kg Total power requirement: 1 kW CO₂ Engraving Laser LASERMAX OS-200 Kdodpfx Absvz Hics Asl - Marking area: 200 x 200 mm - CO₂ laser power: 30 W (metal laser tube, very fine lines) - Laser tube lifetime: approx. 10,000 hours - Laser warranty: 1 year - Wavelength: 1064 nm - Marking depth: 0.02–1 mm (depending on material) - Very high marking speed thanks to oscillating mirrors - Marking line speed: up to 7000 mm/s - Minimum line width: 0.01 mm - Minimum character size: 0.2 mm (metal), 1 mm (glass) - Repeatability: ± 0.002 mm - Machine power: up to 1.0 kW - Voltage: AC / 220V / 50Hz - Freely definable zero point on the working area for flexible operation and easy positioning - Software preinstalled on PC - Industrial PC with Windows 7 and LED monitor - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Active water cooling chiller for stable laser system operation and long laser tube life - Suitable for wood, ceramics, glass, and plastics - Dimensions: L=1400, W=1100, H=1300 mm - Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2700 x 900 x 1900 mm Weight: 800 kg Total power requirement: 3.5 kW CNC Engraving and Milling Machine ROUTERMAX ROTARY 1200-200 - Max. workpiece diameter: 200 mm - Max. workpiece length: 1200 mm - Milling spindle motor: 2.2 kW, water-cooled - Collet tool holder diameter: 6 and 8 mm - Spindle speed: 0–24,000 rpm - Drive motors: Stepper motors - Voltage: AC 230 V / 50 Hz - X-axis guide: Linear guide Kdodov A Hcxepfx Ab Ael - Z-axis guide: Linear guide + ball screw - Programming language: G-code - Control: DSP (optional MACH3 control) - Interface: USB - CAD/CAM software: Vectric CUT 2D PRO (NESTING included) - Lubrication pump - Ambient temperature: 0–45°C - Relative humidity: 30–75% - Dimensions approx. 2700 × 900 × 1900 mm - Weight: 800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH) 0x0x0 mm Weight 0 kg Total power requirement 0.5 kW Glue application machine GLUEMAX TWIN-200 - Working width: 200 mm - 2 x glue rollers, diameter 140 mm - Glue roller hardness: 70 Shore - Speed: 20 m/min - Power: 2 x 0.25 kW - Voltage: 400 V, 50 Hz Kdjdpsvz E Uwjfx Ab Asl - Quick-change device for glue roller - Glue tank and rollers made of stainless steel - Mechanical height adjustment of the upper glue application roller - Mechanical digital display of the pass-through height - 2 rollers in the infeed - 2 disc rollers in the outfeed - CE conformity

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH) 800x600x500 mm Weight 60 kg Total power requirement 0.25 kW Glue application machine GLUEMAX SINGLE B-200 - Working width: 200 mm - Glue roller diameter: 140 mm - Glue roller rubber hardness: 70 Shore - Feed speed: 20 m/min - Motor power: 0.25 kW - Voltage: 400 V, 50 Hz - Quick-change device for glue roller - Glue tank and rollers made of stainless steel - 2 infeed rollers - 2 discharge disc rollers - CE conformity - Dimensions: 800 x 600 x 500 mm Kedpfx Ajvz Hmnsb Aodl - Weight: 60 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NM0KCXTP6KSU99707, prevoženi kilometri: 5.405 km, moč: 367,75 kW (500,00 KM), prva registracija: 10/2025, vrsta goriva: dizel, lastna masa: 8.573 kg, največja dovoljena obremenitev: 9.427 kg, skupna masa: 18.000 kg, velikost pnevmatike: V: 315/70 R22.5 - A: 315/50 R22.5, stanje pnevmatik: 100 odstotek, medosna razdalja: 3.600 mm, naslednji pregled (TÜV): 11/2026, gorivo: dizel, zavore: intarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 16, emisijski razred: Euro 6, število postelj: 2, skupna dolžina: 3.600 mm, skupna širina: 2.540 mm, skupna višina: 3.916 mm, Leto izdelave: 2025, obratovalne ure: 164 h, Oprema: ABS, AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), Tahograf, USB priključek, airbag, asistent za mrtvi kot, asistent za ohranjanje voznega pasu, centralno zaklepanje, dodatne luči, drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, hladilnik, klimatska naprava, meglenke, nadzor oprijema, nadzor tlaka v pnevmatikah, navigacijski sistem, parkirna klimatska naprava, parkirni grelec, popolna servisna zgodovina, računalnik na krovu, retarder, sistem za pomoč pri speljevanju v klanec, spojka prikolice, spojler, start-stop sistem, tempomat, Ponujamo najemno formulo z minimalnim trajanjem 36 mesecev, kar vam zagotavlja stabilnost in dolgoročno kontinuiteto. Mesečna najemnina znaša 2.000 € brez DDV, kar zagotavlja pregledno in jasno stroškovno strukturo. - Kdedpfx Aeym A S Ueb Asl Ob začetku se zahteva predplačilo v višini 5.000 €. To zagotavlja potrebno varnost za obe strani ter predstavlja trdno osnovo za dobro sodelovanje. - Poleg tega je vključen tudi vzdrževalni pogodba, tako da vam ni treba skrbeti za servis ali dodatne stroške. Uživajte v brezskrbni in profesionalni rešitvi, kjer sta kakovost in zanesljivost v ospredju.

Stanje: pripravljen za uporabo (rabljen), Fanuc 0551416 reduction gearbox for Robot R-2000iA 125L – diameter: 180 mm, used, normal signs of use, 100% fully functional, scope of delivery as shown in the photos. Kdjdpfx Aer Nqr Ijb Aol

Stanje: pripravljen za uporabo (rabljen), IEC71L28-LC-FA2 Series LC three-phase asynchronous motor, water-cooled, 400V, 200 Hz, 12 kW, IP65, B5 flange mounting, centering diameter 110 mm, 4 x holes Ø 9 mm on 130 mm PCD, smooth shaft 28 x 6 x 60 mm, rated speed: 12,000 rpm, max. speed: 16,000 rpm, dynamically balanced, coolant connection M14 x 1.5, manufacturer unknown, used, normal signs of use, fully functional, delivery as per photos. Ksdpfji D Id Rox Ab Aedl

Stanje: pripravljen za uporabo (rabljen), Rexroth SR 8 3842998020 swivel arm robot, serial number: 4810354, used, in good condition, fully functional, delivery scope as per photos. ATTENTION: Please enquire about packaging and shipping costs separately! Kdjdpfxeqb Tdbj Ab Asl

Stanje: pripravljen za uporabo (rabljen), Schunk Gemotec CLM 200-H100 compact slide, SN: MK116609, used, normal signs of wear, 100% functional, scope of delivery as per photos Kdjdomz Ecwjpfx Ab Ael