Cheval Liberté Cheval Liberte Pw0Lux 1500Kg 250X155X85Cm Rückwärtskipper Mit Gitteraufsatz nakup rabljenega (9.427)

Stanje: novo, lastna masa: 556 kg, največja dovoljena obremenitev: 2.160 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.680 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 4.160 mm, skupna širina: 1.640 mm, skupna višina: 1.560 mm, Leto izdelave: 2026, Humbaur Rear Tipper HUK 272715 with 60 cm mesh sides and Flex-E-Pump, allowing easy tipping with a cordless screwdriver. Our price: €5,650 incl. 19% VAT, 6.4% delivery fee, and vehicle documents! Description: The HUK rear tippers are available as single or tandem axle variants. These trailers are especially distinguished by their galvanized bridge plate with V-groove outer frame and recessed lashing eyes. The tipping angle is 45 degrees. All models can be equipped with an electric pump and mesh sides or aluminum side walls. Technical Data: Trailer type: Tandem axle Construction: Aluminum Rear tipper 45° Weight: 556 kg Gross weight: 2,700 kg Payload: 2,160 kg Internal length: 2,680 mm Total length: 4,160 mm Dcjdpfxezbkhte Ac Neh Internal width: 1,500 mm Total width: 1,640 mm Internal height: 300 mm (with mesh sides 900 mm) Total height: 950 mm (with mesh sides 1,560 mm) Loading height: 670 mm Tyres: 13 inch Features: Chassis and tipping platform welded and fully hot-dip galvanized Galvanized bridge plate with V-groove outer frame and recessed lashing eyes, lashing capacity 400 kg per tie ring Galvanized bridge floor (3 mm) 300 mm drop sides all around, foldable Drawbar locks Tapered corner stanchions Automatic jockey wheel Lighting protected within underride guard 3-stage telescopic cylinder Double-acting hand pump

Stanje: novo, lastna masa: 144 kg, največja dovoljena obremenitev: 606 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.304 mm, širina tovornega prostora: 1.256 mm, višina nakladalnega prostora: 700 mm, velikost pnevmatike: 155/70 R13, Leto izdelave: 2024, obratovalna teža: 750 kg, Wide Trailer with Jockey Wheel and Mesh Sides – Garden Trailer 230 KIPP A wide trailer with a jockey wheel from the KIPP Garden Trailer 230 series, measuring 230 x 125 cm. The Garden Trailer 230 model from KIPP is 19 cm wider than the KIPP Garden Trailer 200. The set includes: a jockey wheel, mesh sides, and a flat grey tarpaulin cover. Robust jockey wheel from renowned German manufacturers. Galvanized steel mesh sides, resistant to rust. With the flat grey tarpaulin, you create an excellent loading platform for transporting goods that require a dry and spacious area during transport. An additional advantage of a wide trailer with a jockey wheel is the option to tip it and fold down the drawbar, allowing you to store the trailer vertically on its rear and quickly unload bulk goods. Dcodet Id Tbepfx Ac Neh When you purchase our new trailer, you receive a 2-year warranty, allowing you to use it without fear of damage. Each product is supplied with an operating manual and a warranty booklet. All important documents are delivered together with the trailer. Additionally, you can later purchase optional accessories such as BIS extension sides, covering tarpaulins with the H-800 frame, a theft protection device, or an aluminium cover. Should you have any questions or uncertainties during use, you can always contact our specialists. They are happy to provide all information and explanations. Furthermore, our wide trailer with jockey wheel and mesh sides can be tilted thanks to its tipping drawbar. This enables much more comfortable loading and unloading of goods that would otherwise have to be lifted or dropped manually. This feature is most commonly found in significantly more expensive caravans, which greatly enhances the user experience. Another advantage of this solution is the option to store the trailer upright at the back with the drawbar folded in. So you no longer have to worry about the trailer taking up excessive space in your garage or not fitting due to the protruding drawbar. You can even place it against the facade of a building or anywhere you wish!

Stanje: novo, lastna masa: 400 kg, največja dovoljena obremenitev: 1.100 kg, skupna masa: 1.500 kg, dolžina tovornega prostora: 2.300 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1 m³, barva: srebrn, gradbena višina: 950 mm, delovna širina: 1.540 mm, Hydraulics, automatic reverse, hot-dip galvanization, roof window, hand pump / full steel floor, * IMMEDIATE AVAILABILITY * incl. hand pump / full steel floor Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 1,500kg - Unladen weight: 400 kg - Payload: 1,100 kg - Internal dimensions: 230 x 140 x 30 cm (L x W x H) - Overall external dimensions: 365 x 154 x 95 cm (L x W x H) - Loading edge height: approx. 64 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at extra charge - incl. vehicle documents Vehicle Construction: - Floor: solid full steel, massively reinforced - Side walls: anodised double-walled aluminium, foldable & removable on all four sides - Side wall height: 30cm - Chassis: flatbed, AL-KO rubber suspension axle - Tipping function: Yes, rearward - Hydraulics: manual pump for tipping - Tipping angle: approx. 45° - Hydraulic cylinder: 3-stage - Overrun device & brake: AL-KO - Frame/chassis: welded steel frame, hot-dip galvanised - Top extension: at extra charge - Lashing rings: 4 fitted into the floor (800kg/daN each) - Support stands: at extra charge - Ramps: at extra charge - Lighting plug: 13-pin - Registration: ZBII & COC documents Standard Equipment: - anodised double-walled aluminium side walls - side and rear drop sides, foldable - removable side panels - full steel floor - extremely robust - very stable welded steel frame - frame fully hot-dip galvanised by immersion bath - numerous crossmembers for high point loads - additional continuous longitudinal reinforcements welded in - hand pump for manual tipping - lashing hooks welded underneath the frame - automatic reverse system - AL-KO overrun device and parking brake - robust toggle latches - very stable reinforced V-drawbar - 13-pole plug - reversing lights - large-dimensioned safety lighting - integrated rear fog light - rear-frame flush-fitted lighting - centrally mounted automatic jockey wheel - Registration documents: ZBII and COC documents Accessories retrofit possible – please enquire: - 100km/h registration with shock absorbers - hydraulic pump for cordless screwdriver operation - side wall extension - mesh extension, corrugated grid 60cm - closed steel board extension 60cm - spare wheel - toolbox - rear support legs - ramps - flat cover - net hooks - additional lashing points - slot/perforated rails for lashing straps & load bars - lath rail with rubber coating for straps/bars - reversing lights - lashing straps - much more. New vehicle with warranty and TÜV. We are happy to offer you a suitable financing option! Descriptions and images are copyright protected!! Over 800 trailers immediately available from stock! For over 30 years, we have been your specialist dealer and service workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Delivery throughout Germany available for an additional fee! Trailer Centre BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Dcedpfx Aju Hr Eqec Njh

Stanje: novo, including tiltable - enclosed load platform with perforated tracks / manual cable winch Technical specifications: • Brand: Martz • Model: GT KIPPBAR 360 S 1.5T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: without • MOT/inspection: 2 years from first registration • Internal dimensions (LxWxH): 361 x 190 x 0 cm • External dimensions (LxWxH): 515 x 204 x 80 cm • Perm. gross weight: 1,500 kg • Unladen weight: 470 kg • Payload: 1,030 kg • Chassis: Platform trailer (wheels underneath body) • Tyres: 195/55R10C • Suspension: KNOTT rubber suspension axle • Jockey wheel: Yes • 100 km/h approval: optional, retrofittable DESCRIPTION • Perforated steel tracks, ideal for secure lashing • Anti-slip, waterproof plywood floor between tracks • incl. steel loading ramps • Tiltable load area • Very low chassis for minimum loading angle • Tiltable load platform (6° loading angle) • Very lightweight trailer with robust construction • Additional 8x lashing eyes in floor • Braked KNOTT rubber suspension axle • Automatic reversing system • KNOTT overrun hitch and parking brake • Reinforced, high-strength V-drawbar with bolted construction • 13-pin plug • Reversing light • Large-size safety lighting • Integrated rear fog light • Tail lights recessed into rear frame • Jockey wheel fitted Optional accessories available – please enquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Tool box • Reversing light • Lashing straps • and more. New vehicle with warranty and MOT. - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance or export registration plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Dcodpox Tbi Hjfx Ac Noh Over 1,200 trailers available immediately! We have been a specialist dealer and repair workshop for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Errors, omissions, and prior sale excepted -

Stanje: rabljeno, največja dovoljena obremenitev: 12.350 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2005, Oprema: ABS, dvižna zadnja plošča, ATTENTION: Refrigeration unit non-functional! Equipment: * Schmitz box body with insulated walls * MBB tail lift, 1,500 kg * Air suspension * SAF axles * ABS * Disc brakes * Tyre size 385/65R22.5 Other details: * First registration in Germany * 1 previous owner * Payload 12,390 kg * Permissible total weight 18,000 kg * Refrigeration unit defective Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approx. 200 vehicles in stock, including vans, commercial vehicles and construction machinery! We continually offer attractive financing options at special rates. If interested, we will gladly prepare an individual quote! Trade-in of your commercial vehicle is possible. If a new TÜV (inspection) approval is required, we will be happy to obtain an offer from one of our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners at an additional cost. Dcodjuirdvjpfx Ac Noh The information provided in advertisements, online, on price tags and in the photos are non-binding and do not constitute guaranteed features. The seller accepts no liability or guarantee for typographical or data transmission errors. Listed features may need to be checked separately. Subject to error and prior sale.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Dodpfx Aeyzrp Hjc Nsch Avstrijsko vozilo Originalno le 15.020 km Popolno za predelavo v avtodom

Stanje: rabljeno, Dimensions: 600 mm x 380 mm x 220 mm - Control unit suitable for Weinig window machines. - 3 units available. Dcedpfjlkckujx Ac Njh Price per unit: €690.00 + VAT.

Stanje: dober (rabljeno), • Type: GS - 250 • Serial No.: 14 • Year of manufacture: 1999 • Dimensions min.: L1100 mm x W800 mm x H900 mm • max.: L1700 mm x W1300 mm x H900 mm Dcjdpfergqp Njx Ac Nsh • Power supply: 1 x 220V / 50Hz / 7.8 A • Connected load: 1500 W / 2800 RPM – 1 kW • Price on request

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Dcodpszaakhsfx Ac Noh Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Djdpezaahmsfx Ac Nech Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video ist nur ein Beispiel, wie man diese Zelle vorbereiten kann Zelle mit Schleifroboter Kuka KR 180 Schleifzelle Berger 2012 (Außenschleifen A1) - Gesamtgewicht ca. 6300 kg - Abmessungen von der Zelle: ca. 4650 x 2400 x 3100 mm 6-Achsen Roboter Kuka KR 180 R2500 Extra - Baujahr 2011 - Steuerung KRC 4 - zusätzliche Achse (7. Achse) Bandschleifstation BSS10 - max. Riemenabmessungen 3500 x 30 mm - max. Kontaktscheibendurchmesser 200 mm - Motorleistung 4 kW 2 x Polierstationen, - Polierscheibendurchmesser 350 - 600 mm - Leistung 5,5 kW Dedog Saqvopfx Ac Noch Greiferwechselschrank BandfördererInteroll Automation GmbH - Gesamtlänge ca. 2000 mm - Bandbreite ca. 440 mm Im Preis ist ein komplettes Konzept wie auf dem Video zu sehen ist Wir haben 4 solche Zellen. Es ist möglich, jedes Detail zu machen, wie Sie im Video sehen können

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 91130417, Leto izdelave: 2018, obratovalne ure: 320 h, nosilnost: 1.600 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 1.550 mm, težišče tovora: 600 mm, tip droga: triplex, gradbena višina: 2.200 mm, model baterije: PzS, kapaciteta baterije: 465 Ah, napetost baterije: 48 V, dolžina vilic: 1.150 mm, Oprema: UVV varnostni pregled, Jungheinrich ETV 216 regalski viličar s triplex dvigalom 500DZ v zelo lepo ohranjenem stanju. Naprava z malo delovnih ur, integriranim stranskim pomikom, popolnim prostim dvigom in kompaktno konstrukcijsko višino. Tehnično in vizualno v dobrem splošnem stanju, takoj pripravljena za uporabo, vključno s polnilcem. Možen izvoz in transport. Dcedpfx Aey Tpuksc Noh

Stanje: zelo dobro (rabljeno), Hydraulic cylinder, support cylinder - Piston diameter: approx. 130 mm - Piston rod: 100 mm - Stroke: approx. 700 mm - with support rollers - each cylinder equipped with hand pump Dsdpfx Aob A Hvloc Njch - Quantity: 3 cylinders available - Price: per piece

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stair Stringer Milling Device SCHEER TW 4 + Router HM 16 Everything is in visually and technically excellent, as-new condition, the machine has been used very little. Everything works perfectly. You can start working with it immediately. All machines are intended for professional/commercial use, not hardware store junk. Stair Stringer Milling Device SCHEER TW 4 With this device, you can mill steps and risers very precisely and accurately. The hand crank even allows you to process curved end faces; you can also use it for milling cutouts in other panel materials, for example, kitchen worktops. Equipped with hardened guide shafts, on which the cross slide with the router is mounted. With ball bearing guide bushings, allowing the device to be moved very easily, accurately, and safely. The machine can be securely clamped to the stringer or similar workpieces with 4 screw clamps. The cross slide features two stops each for both longitudinal and transverse directions. Comes with two positioning angles. Includes user manual, tools, and all accessories. The milling travel in the longitudinal direction is 750 mm; in the transverse direction, the milling travel has been increased from 75 mm to 320 mm, which has significantly expanded the possible uses of the machine. To increase the milling travel, a new base frame made of aluminum profiles had to be built. The modification work was carried out by a reputable mechanical engineering company. Everything works perfectly; this machine is truly unique. Router SCHEER HM 16 Very good condition, with only minor signs of use. Extremely robust due to the triple-supported milling spindle. Precise concentricity and flawless milling finish. Accurate column guide and torsion-resistant milling table. Constant speed even under heavy load. With high-performance motor (virtually no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. This machine is suitable for the heaviest continuous milling operations. Good visibility of the milling shaft; chips are blown away by a strong fan. 220V, 1800W Dodeyxr T Tjpfx Ac Nech Speed: 18,000 rpm Works flawlessly. With M16 IG tool holder.

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load Dsdpfx Acszbikys Nech - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Dcsdpfx Aezbighsc Nsh Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Dcodpeh R Taqjfx Ac Njh Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) Dcjdpfx Ajmhhy Nec Neh - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Dcjdpfx Acsy Rh Nzo Njh Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale With forward/reverse rotation The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately 380 V, 5500 W, with motor circuit breaker for overload protection Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Dcsdpowauaxsfx Ac Neh

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs Dedpfxsykuh Ns Ac Njch 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps Dcsdpfjyktv Ssx Ac Noh TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Dcsdpfx Asx Ta Nxec Neh Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control Dcjdpfxsykud Rj Ac Nsh

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S Djdpsyktrtefx Ac Noch with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control