Baader 581 Pro nakup rabljenega (7.717)

Stanje: novo, Leto izdelave: 2023, Automate your cleaning process with equipment from the Superior Series: lifting device with support grid for effortless parts handling, filtration systems for dirt separation, exclusive oil separation system (OPS), and intuitive touch panel. Standard models available from 150 L to 8,000 L. TECHNICAL CHARACTERISTICS Exterior dimensions of the machine: 2,140 x 1,540 x 1,720 mm Interior dimensions of the tank: 1,300 x 794 x 670 mm Usable dimensions of the parts basket: 1,270 x 685 x 470 mm Maximum load: 400 kg Worktop height: 980 mm Rcsdpfsf E Nt Dox Aqtef Tank capacity: 692 L Ultrasonic generator power: 4,800 W Ultrasonic operating frequency: 28 kHz Heating element output: 12 kW

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used high-capacity inserting unit "Plockmatic HCI3500" Scope of delivery: 1 x Plockmatic HCI3500 Compatible with the following Ricoh Pro models: - 82xx series - 83xx series - C72xx series - C92xx series - C7500 - C9500 Counter readings: Rcjdpfx Aqsrpzprjtof Total: approx. 116,898 pages Condition: This offer is for a used device, which may show signs of use (minor scratches or discoloration). - The device has been function tested Packaging and shipping: You are welcome to inspect the device during our business hours. Please make an appointment in advance! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), številka stroja/vozila: LNDE002222, Ink technology: Ultrachrome® Colors: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum droplet size: 3.5 pl Nozzle configuration: 360 nozzles (black), 360 nozzles per color Print resolution: 2,880 x 2,880 dpi Paper formats: A0, A1, A2 (42.0 x 59.4 cm), DIN A3+, A3 (29.7 x 42.0 cm), A4 (21.0 x 29.7 cm), B1 (72.8 x 102.8 cm), B2 (51.4 x 72.8 cm), DIN B3, DIN B4, 17 inch, 24 inch, 44 inch Page margins – single sheet mode: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Rcodpjpitkrofx Aqtsf Supported media thickness: 0.08 mm – 1.5 mm Duplex: NO Equipment / further details: supplied with roll stand

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JEWELliner "XS" PRO Modell "Premium", vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS" model "Premium" available with 30W CW and camera - Electric lift door – auto-focus – compact machine size - - Developed and manufactured in Germany - Further models, power ratings, and options available on request. Engraving laser – marking laser – laser marker with "Laser Class 1" protective enclosure. Our JEWELliner "XS-PRO" model "Premium" marking laser is suitable for marking and engraving all metals, select plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Rcodpfjppxmkex Aqtsf Applications: Jewelry, metal, and advertising industries. Material examples: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon. Application possibilities: - Graphic engraving (logo, drawing, hand-drawing) - Photo engraving - Barcode (bar code, Data Matrix, QR code) - Serial number marking - Inner ring engraving (e.g., name, date, symbol, handwritten)—optional - Outer ring engraving (e.g., name, continuous graphic, continuous pattern)—optional - Bangle engraving inside and/or outside—optional - Text engraving (straight text, circle text, text arc, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (microtext down to min. 0.25 mm character height) - Rotary engraving (marking on round or curved surfaces)—optional Compact construction, all components integrated in the housing and efficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with deflection head and focus module - Laser Class 1 safety housing with 200x140 mm viewing window - Automatic door opening - Emergency stop switch - 180° view of the marking area within the housing - Z-axis with auto-focus – motorized - Rotary axis with removable jewelry chuck - Incl. marking software (final configured) - High-resolution industrial camera USB 3.1 Technical specifications / data: Laser type: fiber laser Output power CW: 30W Available frequency range: 1.8 - 2,000kHz Connection type: USB 2.0 Wavelength: 1064nm Lens (delivered): F-Theta 163 Marking field size: 110 x 110 mm (smaller sizes available) Focusing range: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your own production process. We are also happy to produce engraving samples for you. Images and illustrations may differ.

Stanje: novo, High-performance saw-splitter with 20 tons splitting force - Brugger SA48 Pro! The Brugger SA48 Pro saw-splitter is the perfect solution for fast and effortless processing of logs with a diameter of up to 48 cm into high-quality firewood. This machine stands out due to its well-designed yet simple construction, resulting in minimal maintenance requirements and simplified repairs. This impressive device is available with a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point hitch mounting. The SA48 Pro operates completely mechanically and does not use electronic controls, instead being operated exclusively via lever-operated hydraulic valves. Specifications: - Maximum cutting length: 55 cm - Maximum diameter: 48 cm - Splitting force: 20 tons - 55 cm bar - Extra-wide 3.2 m conveyor belt - Hydraulic infeed up to the chainsaw Rcodjlu Dc Nepfx Aqtof - Swiveling conveyor belt - Automatic chain lubrication Despite its high splitting force and large diameter capacity, the saw-splitter remains relatively compact. Equipped with a tow bar, it can be hitched to any standard trailer coupling for easy transport. Two people can also move the saw-splitter by hand on level ground without the need for a vehicle. The log length can be infinitely adjusted up to 55 cm. The splitting wedge can be positioned up or down in various positions using a hand lever, allowing for 2-way, 4-way, or even 6-way splitting depending on the wood thickness. Optional equipment such as the log lifter or chain conveyor further facilitate operation. With the chain conveyor, multiple logs can be loaded using a forklift, crane, or front loader, eliminating the need to lift single logs by hand. The SA27 Pro has been replaced by the improved SA48 Pro. Prices: Brugger SA48 Pro saw-splitter: €9,749 6-way splitting blade: €199 8-way splitting blade: €299 Additional PTO drive (for electric or petrol models): €949 Log lifter: €1,498 Chain conveyor: €1,898

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 14.279 h, številka stroja/vozila: 644063, Delivery volume 4.61 m³/min at 10 bar Delivery volume 5.23 m³/min at 8 bar Operating pressure 10 bar Rated power 30.0 kW Operating hours 14,279 Rcedpfon Stansx Aqtof Load hours 11,148 Compressed air connection G1 1/4" Sound level 69 dB(A) Required space (L x W x H): 1,400 x 830 x 1,640 mm Weight approx. 850 kg

Stanje: rabljeno, Simatic Field PG / Appareil de programmation / Ordinateur programmateur / Ordinateur portable / Step 5, Step 7, ProTool, Notebook SIEMENS type PG 720 PII Année de fabrication : env. 1999 CPU : Intel Pentium II RAM : 192 Mo Système d'exploitation : Windows 98 SE Disque dur : 6 Go HDD Écran : LCD 12" (pivotant) Saisie : clavier amovible, boule de commande Lecteurs : lecteur de disquettes 3,5" LS-120, CD-Rom Redpfsx E Aywex Aqtecf Interfaces : - Logement pour EPROM - PC/Card (PCMCIA) - MEM-Card - 1 x port parallèle - 1 x port série (RS232) 25 broches - 1 x port série (RS232) 9 broches - 1 x VGA Out - 1 x USB - 1 x MPI/DP 9 broches - Alimentation externe avec câble secteur - Livré en sac de transport Logiciels Siemens installés : - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Dimensions totales (L x H x P) : 400 x 270 x 200 mm (en sacoche) Poids total : 6,5 kg Ordinateur fonctionnel, écran opérationnel, batterie tampon CMOS vide, Batterie d’utilisation mobile hors service, l’appareil démarre. Logiciels Siemens opérationnels.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, hod: 260 mm, globina grla: 410 mm, proizvajalec krmilnikov: Cybelec, model krmilnika: VisiTouch 19, delovna širina: 3.100 mm, upogibna sila (maks.): 160 t, razdalja med stojali: 2.550 mm, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, Baykal APHS PRO 31160 CNC Press Brake The Baykal APHS PRO 31160 is a CNC-controlled press brake constructed from fully welded steel. The machine is equipped with HAWE hydraulics, Fiessler laser safety system (AKAS / LCII), and CNC-controlled table crowning. Operation is via a Cybelec 2D CNC controller. Technical Specifications: Pressing force: 160 t Bending length: 3100 mm Rcodpfxsyrf Ups Aqtef Bending length between uprights: 2550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors, achieving a positioning accuracy of ±0.03 mm. The travel range is X = 1000 mm and R = 160 mm, with a traversing speed of 330 mm/s. Two laterally adjustable backgauge fingers are included. Equipment: - Cybelec 2D CNC controller - Fiessler AKAS / LCII laser safety system - Automatic motorized table crowning (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamp Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication - Operating hours counter - CE conformity Machine Data: Year of manufacture: 10/2025 Serial number: 31865 Dimensions (L×W×H): 3820 × 1800 × 2700 mm The machine is in stock and available for immediate delivery. Warranty period is 12 months for single-shift operation.

Stanje: novo, Stanje: novo Dobavni rok: cca 8 tednov od naročila Država izvora: Turčija Cena: 28.390 € Rsdpfx Aqjynnfvjtscf Leasing rata: 542,25 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 3 mm Maks. širina pločevine: 300 mm Maks. prečni prerez: 900 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Pospešek podajanja: 10 m/s² Navor motorja: 10 Nm Stožčasto-čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 pogonska valja Zunanji dajalnik položaja (enkoder) OPCIJA: Ročni volan in modul za daljinsko vzdrževanje Simlinx € 4.290,--

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država porekla: Turčija Cena: 31.620 € Leasing rata: 603,94 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 2 mm Maks. širina pločevine: 600 mm Maks. presek: 1200 mm² Rcedpsynnf Njfx Aqtsf Premer podajalnih valjev: 80 mm Hitrost podajanja: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčasti čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder OPCIJA: Rokov koles in Simlinx daljinski servisni modul 4.290 €

Stanje: rabljeno, Leto izdelave: 2018, Year of manufacture: 2018 Condition: Very good Multifunctional finishing machine for digital printing Rodpfjww Etqjx Aqtocf Configuration: - CCD camera - 6 rotary knives - Cross cutting unit - Creasing unit - RTM - automatic perforation and creasing module - All-in-one PC - JobCreator software

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, proizvajalec krmilnikov: PFEIFER technology, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, valovna dolžina laserja: 1.064 nm, Premer cevi (maks.): 160 mm, Dolžina cevi (maks.): 7.500 mm, dolžina mize: 6.500 mm, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 13 letvica, skupna masa: 5.500 kg, skupna dolžina: 14.800 mm, skupna širina: 2.900 mm, skupna višina: 2.525 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, delovno območje: 7.500 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, odsesavanje hlapov, varnostna svetlobna zapora, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 profile and tube laser fiber laser metal cutting for fast material changeovers with up to 6kW, ideal for your production needs. An intelligent and highly effective tube laser processing solution: round tubes, square tubes, rectangular tubes, open sections, and special profiles – all laser cut. This laser machine guarantees maximum productivity during production changeovers. The task: a fiber laser with up to 6kW for a wide range of metalworking applications! Unmatched Laser Cutting Performance High axis speeds and accelerations combined with a robust mechanical structure ensure excellent cutting performance and precision. Rsdpeyh A Nyofx Aqtjcf The tube and profile laser processing machine is designed for production with a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony. Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile and tube loading chain system enables rapid job changeovers. The optional bundle loader offers independent operation. Bevel Cutting A feature that changes everything. With our machines’ ability to tilt the cutting head on a fifth axis up to 50°, we've solved one of the biggest challenges in modern profile processing. If the laser beam always hits the workpiece at a 90° angle, the result is an elliptical cutting edge. By enabling the tube laser cutting head to tilt, you can achieve fully angled cuts together with the feed axis. Naturally, the skyTUBE laser guarantees operational safety! The skyTUBE Pro is a class 1 laser system. There is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, nothing is more important than maximum safety and compliance with the highest standards and regulations. Technical Features: · Enclosed industrial housing; class 1 or, if required, class 4 laser · Working range for tube cutting system/clamping: Uniform tubes from 15 to 160 mm, rectangular tubes from 15 x 15 to 110 mm · Tube working area X 6500 / Y±100 / Z 150 / A ±360° / U ±50° · Automatic material feed for up to 6 x 160 mm profiles, lengths 3500 – 7000 mm · Automatic unloading system for profile sections, tailored to the desired profile length · Z drive system: ball screw axis with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: depending on material and laser configuration, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system; depending on desired profile cutting length, a standard system with max. 4.5 m automatic unloading results in a total system length of approx. 14,800 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, moč: 7,5 kW (10,20 KM), tlak (min.): 6 letvica, tlak (maks.): 15 letvica, raven hrupa: 62 dB, Kapaciteta rezervoarja za stisnjen zrak: 270 l, The machine has already been dismantled and stored by a professional. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volume flow: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air receiver: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 V ~3 / 50 Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg Rodpfx Aqozb Idrotscf EQUIPMENT Refrigerated dryer Frequency control Pre-filter grid Electronic control RENNERtronic Touch Level-regulated condensate drain KN5 230VAC, shortened version Schneider add-on kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration, 5 micron Sub-micro filter LPPN 73 SMA Particle filtration, 0.01 micron Wall mount incl. connection set for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are sold as is, without guarantee. The item is sold "as seen." The buyer is responsible for inspecting the completeness of the item on site.

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Price: €1,445 Holder: 19 mm Weldon Motor output: 1 kW Length: 307 mm Rsdpfx Aqjyrhppstscf Width: 221 mm Height: 317 mm Weight: 13.5 kg Max. core drilling capacity: 36 mm Max. cutting depth: 51 mm Stroke: 70 mm Motor speed: 350 rpm Min. workpiece thickness: 6 mm The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current status of the drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation in automatic mode. The drill control continuously selects the most effective operating conditions based on the relationship between motor load, feed rate, and the permissible cutting parameter range for the specific tool type and bore diameter. This results in longer tool life for HSS and TCT cutters and improved machine performance. Countersinking and machining thin workpieces is only possible in manual mode when clamping force is insufficient (blinking green LED). A safety strap protects the machine from falling in the event of a loss of magnetic hold. Features and benefits: • LED monitoring system displays the current status of the drill and provides safety and diagnostic data. • The LED system blinks green if inadequate adhesion is detected, such as with gaps or thin workpieces. • Auto Feed Smart Drive optimizes milling parameters for each tool, depending on type (HSS or TCT) and hole diameter from 12 mm to 36 mm, significantly extending tool life. • The tilt sensor stops the motor if the machine tips. • Dual-rod guide system ensures exceptional rigidity and backlash-free operation. • Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials. • Automatic feed control stops the machine as soon as the cutter passes through the workpiece. • Protection against automatic restart after power failure. • Compact, robust design with ultra-lightweight construction (13.5 kg). Standard scope of delivery: • Drill • Metal case • Safety strap • Coolant tank • Chip guard • 4 mm Allen key • Operating manual

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in structural steel: 12 mm Spindle mount: 19 mm Weldon Motor output: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Rcjdpfxsyrhtnj Aqtef Min. workpiece thickness: 6 mm This special battery-powered magnetic base drilling machine is designed for use in remote locations where no mains power is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that displays signals in green and red to indicate the current status of the drill and provide safety notifications. This machine can be used on convex (minimum diameter – 80 mm) and concave (minimum diameter 1000 mm) materials. With the PRO-36 PM Battery equipped with the CAS LiHD 10.0 Ah battery pack, up to 47 holes (D=20 mm) can be drilled in 10 mm steel plates. Features and benefits: • LED monitoring system flashes green when insufficient adhesion is detected, for example due to a gap or workpieces that are too thin • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor in the event of machine failure or magnetic detachment • Control panel is fitted with so-called "vandalism-proof" illuminated motor start/stop buttons Standard delivery set: • Cordless drill with cooling system • Plastic case • 4.0 Ah battery • Handle (3 pieces) • Safety strap • 4 mm Allen key with handle • Operating instructions OPTIONS (PRICES ON REQUEST): Charger Pressurised cooling system Vacuum pad Vacuum pump Pneumatic ejector

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9088000069A, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 550 mm, pomik po osi Z: 510 mm, teža obdelovanca (maks.): 1.700 kg, skupna masa: 6.950 kg, Na prodaj je obdelovalni center DMG MORI M2 Pro, letnik 2023, v dobrem stanju. Stroj je bil v uporabi približno 2,5 leta, je popolnoma funkcionalen in si ga je mogoče ogledati po predhodnem dogovoru. Prodaja poteka zaradi prenove našega strojnega parka. Rcjdpfxozh U Ngs Aqtsf Tehnični podatki Proizvajalec: DMG MORI Model: M2 Pro Letnik: 2023 Krmiljenje: Siemens SINUMERIK ONE Hitrost vretena: 12.000 obr/min Pomiki osi (X/Y/Z): 1.100 / 550 / 510 mm Velikost mize: 1.400 × 600 mm Največja obremenitev mize: 1.700 kg Teža stroja: cca 6.950 kg Stanje Dobro stanje Popolnoma funkcionalen Ogled možen po dogovoru Aktualne delovne ure posredujemo na zahtevo. Za več informacij ali vprašanja nas kontaktirajte.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RR16HHE3L, Leto izdelave: 2026, nosilnost: 1.600 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 1.715 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.185 mm, moč: 1,2 kW (1,63 KM), kapaciteta baterije: 205 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm, širina vilic: 170 mm, debelina vilic: 65 mm, Tip prednje pnevmatike: pnevmatike iz poliuretana (črne), tip zadnje pnevmatike: pnevmatike iz poliuretana (črne), skupna masa: 1.165 kg, skupna dolžina: 1.975 mm, skupna širina: 836 mm, SCHORR VILOROGI VILIČAR ELEKTRIČNI PRO 1600 KG, NOSILNOST 5 M, VIŠINA DVIŽENJA RR16HH500E3L, POLNI DVIŽNI HOD - 1.600 kg nosilnost, zasnovan za zahtevno uporabo v skladišču - Trojni nosilec s polnim dvižnim hodom: dvigovanje pri samo 2.185 mm višini konstrukcije - Proporcionalno upravljanje dvigovanja in spuščanja: natančno pozicioniranje na milimeter - 24 V / 205 Ah litijeva baterija, enostavno delno polnjenje Rcedpezktyiefx Aqtof - AC pogon, ki zahteva malo vzdrževanja, večfunkcijski zaslon, do 16 % naklona - Obračalni polmer 1.506 mm, samo 836 mm širine: okretno manevriranje v ozkih hodnikih Močna naprava za vaše skladišče Težke palete, visoke police, kratki časovni cikli: RR16HHE3L je z nosilnostjo 1.600 kg zasnovan za zahtevno uporabo v skladišču in doseže višino dvigovanja 5,0 metrov. Prejem blaga, skladiščenje na paletah, police: z eno napravo pokrijete naloge vašega skladišča namesto, da bi preklapljali med več stroji. Podrobnosti: robustno podvozje, stabilen trojni nosilec, poliuretanske pnevmatike za neprekinjeno uporabo in elektromagnetna parkirna zavora, ki varno drži napravo in tovor v vsakem položaju. Tako bo RR16HHE3L tudi v večizmenskem delovanju ostal tisto, kar vaše skladišče potrebuje: zanesljiva naprava. Polni dvižni hod: polna višina, tudi pod nizkim stropom Nizka vrata, ozki hodniki, visoke police: za to je namenjen polni dvižni hod. Vilice se najprej dvigajo znotraj profila nosilca, ne da bi se nosilec premaknil za centimeter navzgor. Z višino konstrukcije samo 2.185 mm RR16HHE3L preide skozi prehodne odprtine in medetažne prostore, kjer bi se dvigajoči nosilci že dotaknili stropa, in se dvigne na polno višino, takoj ko je na voljo prostor navzgor. Enako velja tudi za druge prostore: 836 mm skupne širine, obračalni polmer 1.506 mm in 2.356 mm širine delovnega prostora (paleta 800 × 1200, dolžina). Varno manevrirate tam, kjer je prostora malo: med policami, v skladišču na paletah, na rampi. Natančno delo, ves dan Proporcionalno upravljanje dvigovanja in spuščanja izvede vsako gibanje točno tako, kot ga določite z ergonomsko oblikovano ročico: hitro dvigovanje, občutljivo in natančno spuščanje na najvišjo raven police. Tako se izognete trčenju palet in poškodovanemu blagu, tudi pri operaterjih z manj izkušenj. AC pogon, ki zahteva malo vzdrževanja, deluje energetsko učinkovito in omogoča premagovanje naklonov do 16 %, večfunkcijski zaslon prikazuje stanje baterije in hitrost na prvi pogled. 24 V / 205 Ah litijevo baterijo enostavno delno napolnite kadar koli, brez učinka izgube pomnilnika; 24 V polnilnik je priložen. Za tem pa stoji tudi proizvajalec: skladišče rezervnih delov, lastna delavnica, osebno svetovanje. Tehnični podatki - Proizvajalec (kratica): SCHORR - Tipna oznaka proizvajalca: RR16HH500E3L - Nosilnost: 1,6 t - Model: 500E3L - Lastna teža, vključno z baterijami: 1165 kg - Pogon: električni - Pnevmatike: poliuretan - Skupna dolžina: 1975 mm - Skupna širina: 836 mm - Dvižna višina: 5000 mm - Višina dviga: 1715 mm - Višina podvozne konstrukcije v spuščenem stanju: 2185 mm - Višina podvozne konstrukcije v dvignjenem stanju: 5445 mm - Dimenzije vilic: 65 mm x 170 mm x 1150 mm - Razdalja med vilicami na zunanji strani: 570 mm - Širina delovnega prostora pri paleti: 800x1200 (dolžina) 2356 mm - Obračalni polmer: 1506 mm - Hitrost vožnje z/brez tovora: 5,0 km/h / 5,5 km/h - Hitrost dvigovanja z/brez tovora: 0,13 m/s / 0,16 m/s - Hitrost spuščanja z/brez tovora: 0,22 m/s / 0,13 m/s - Največja možnost premagovanja naklona

Stanje: dober (rabljeno), Strojna libela, blok libela, okvirna libela, izravnalna libela, natančna libela, okvirna izravnalna libela, precizna strojna libela - Proizvajalec: Fr. Keilpart, precizna strojna libela - Odcitek: 0,03 mm/m Rcedpfxszh E T As Aqtjf - Dimenzije ohišja: 220/65/H70 mm - Teža: 2,1 kg

Stanje: novo, Sick MICS3-CBAZ40PZ1P01 Id. 1092720 microScan 3 Pro varnostni laserski skener SN:21490928, neuporabljen v odprti originalni embalaži, 100% delujoč, dobava kot na slikah. Rjdpfxezl N S Ro Aqtscf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, največja širina rezanja: 92 mm, Oprema: varnostna svetlobna zapora, Wohlenberg Protez 92 Rcsdpfx Ajwzyc Isqtjf Air table Photo cells Spare knife Clamps Manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, EFITM VUTEk® HS100 Pro, digitalni UV-brizgalni tiskarski stroj za visoke obremenitve, združuje produktivnost sitotiska z visoko kakovostjo tiska, ki se približuje kakovosti tiska z ofsetno tehnologijo. Tiskalnik je bil očiščen in pripravljen za transport. Revolucionarna produktivnost: • 3,2-metrski hibridni digitalni UV-tiskalnik obdeluje do 100 plošč/podlag na uro v proizvodnem načinu; do 70 plošč na uro v načinu P-O-P. • Znižani stroški na ploščo, saj ni več potrebe po pripravah za različice naročil, regionalizacijo in prilagoditve. • Manj odpadkov, krajši čas izpadov in brez povečanja stroškov dela. Rcedpfxezl D Ade Aqtsf Za dodatne tehnične podrobnosti glejte priloženo brošuro.

Stanje: kot nova (razstavni stroj), Swift-Cut CNC-plazma stroj za sečenje, tip 1250Pro WT sa vodenim stolom i jedinicom za označavanje Radna površina sečenja 1250 x 1250 mm sa ESAB izvorom struje tehnički podaci: - Radna površina za limove do 1250 x 1250 mm - Dimenzije stola 1980 mm x 1840 mm - Težina stola 800 kg - Kapacitet stola 160 l - Visina 1500 mm - Hod Z-ose 130 mm - Maks. nosivost 200 kg/m² - Brzina prolaza 20 m/min - Vođene: hibridni servomotori i dvostruko zaptiveni linearni ležajevi na svim osama - Zatvorena kuglična navojna vretena na Z-osi. Dupli pogon na Y-osi - Svetli otvor mosta 150 mm - Maks. debljina materijala 25 mm - Maks. mogućnost sečenja kvadratnih cevi 100 mm - Potreban komprimovani vazduh: 7-7,5 bar - Protok vazduha 300 L/min - Linearna preciznost pozicioniranja 0,5 mm/m - Preciznost ponavljanja 0,4 mm/m Rcsdpfxsy Sxvhe Aqtsf - Merenje tolerancije kružnosti 0,3 mm/m DALJE DETALJE RADO NA UPIT

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta goriva: dizel, barva: modra, obratovalna teža: 3.375 kg, Leto izdelave: 2025, Novi mini bager RIPPA R 32 Pro, japonski motor Kubota, 4 valji, 18,5 kW, emisijski standard Euro 5, Tier 4 Stage V, priprava za hidravlično prijemalo, klimatska naprava, kamera za vzvratno vožnjo, letnik 2025, hitra menjava orodij, 1000 mm nagibna žlica, garancija. Rcedswlvzuspfx Aqtef

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Edge Sanding Machine KSO 150 F PRO NEW Scope of delivery: Sanding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x sanding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, Redoyxqtfspfx Aqtocf Tool kit, Mitre fence Sanding unit tiltable by hand crank, Machine stand made of welded steel, Oscillating sanding belt with separate gear motor, Oscillation can be switched on as required, Sanding platen with graphite coating, Height-adjustable sanding table, Auxiliary table with extraction ports, Sanding sleeve fixture with integrated work table, Adjustable stops 2 extraction ports ø100 mm, Table size: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Sanding belt length 2640 mm, width 150 mm, Belt speed 14 m/s, Sanding area length 800 mm, width 150 mm, Oscillation stroke 15 mm, Sanding unit tilting range 0-45° Machine dimensions 1750 x 1050 x 1200 mm, Weight 310 kg LIST PRICE RRP €11,050 Available at short notice Transport available at extra cost!

Stanje: novo, Leto izdelave: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPF) and catalytic converters, constructed entirely of AISI 304 stainless steel and acid-resistant AISI 316 steel. It is equipped with an integrated measurement system and a drying unit operating at temperatures up to 130°C, utilizing a side channel turbine. An integrated thermal printer enables the documentation of filter contamination measurements before and after regeneration. This device is an excellent addition to DPF cleaning machines that do not have a built-in drying system. Rodpfx Aqeglpywetscf ADVANTAGES OF USING THE DPF HEATER PRO: - Can be used independently of the regeneration device - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results documented by printout - Fast filter system with Camlock closure - Adapters for passenger cars and commercial vehicles - Fully automatic drying process TECHNICAL DATA: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Max. power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Air flow: up to 390 m³/h - Overpressure: up to 370 mbar - Negative pressure: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable in the range of 70°C - 130°C - Safety devices: pressure sensor, emergency stop switch - Declaration of conformity: CE