Accuway Machinery Ut200-M nakup rabljenega (111.624)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 19101105, širina valja: 1.100 mm, Oprema: Na voljo je tipska ploščica, popolna servisna zgodovina, The SDFM-1100 roll-to-roll laminator is a multifunctional machine for lamination processes. It is designed for both cold and hot lamination. The paper is laminated on one side with film and then the web is rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system delivers the paper to the laminating section, where heat and roller pressure bond the paper and film together. The rollers are equipped with a heated water circulation system with constant temperature control. Godpfx Afevy Aipowjit The paper roll is held in place by shafts, which are controlled by a pneumatic brake. The paper is unwound to a web aligner, which is equipped with an automatic system to align the paper web before lamination, ensuring an even film coating. In the laminator, non-adhesive film is coated with water-based adhesive and subsequently dried via a heated cylinder, or pre-coated adhesive film is unwound directly to the laminating cylinder. The laminating cylinder is heated by induction heaters. Under the laminating cylinder, paper is bonded to the film by heat and pressure generated by a lower rubber roller, which presses the film and paper together onto the laminating cylinder. The laminated web is then wound onto a core in the receiving section, from where it can be transported to further production processes. SDFM-1100 Specifications: - Maximum roll width: 1100 mm - Maximum roll diameter: 1100 mm - Paper weight: 80 - 500 g/m² - Film thickness: 10-50 microns - Operating speed: 10 - 65 m/min - Electric voltage: 380V 50Hz - Total power: 78 kW - Maximum energy consumption: 30 kW - Total weight: 8000 kg - Machine dimensions: 10130×2130×2960 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: omejena funkcionalnost, moč vretenovega motorja: 60 W, stružna dolžina: 9.000 mm, premer struženja nad prečnim suportom: 1.400 mm, največja hitrost vretena: 160 obr/min, premer struženja: 1.600 mm, skupna masa: 35.500 kg, največja hitrost vrtenja: 160 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna širina: 2.000 mm, skupna dolžina: 12.000 mm, delovna dolžina: 10.000 mm, teža obdelovanca (maks.): 16.000 kg, premer struženja nad ležiščem sani: 1.600 mm, moč: 60 kW (81,58 KM), trajanje garancije: 12 meseci, Stroj v stanju kot nov s CNC, v procesu obnove. Prvotno izdelan leta 1990, ima malo delovnih ur zaradi zaprtja tovarne. Popolnoma posodobljena oprema: elektrika, elektronika, hidravlika, kabli, prenosne verige; nov CNC (izdaja 2025). Mehansko v stanju kot nov, v celoti pregledljiv. Delno razstavljen zaradi prostorskih omejitev, delno v obratovanju do zaključka inštalacije. Gedpfx Ajygk I Dofwoit Ogled možen kadarkoli, primeren za težko industrijsko rabo. Za več tehničnih podrobnosti pošljite povpraševanje. Cena: po dogovoru. Dostava/namestitev: možnosti prevoza in ponudba za namestitev na zahtevo. Preizkus ob dobavi: na voljo Garancija: 1 leto za mehaniko, elektriko, hidravliko, 2 leti za CNC opremo.

Stanje: rabljeno, Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N32469, National double-ram press M68, used, year of manufacture 1974, Gsdpfswiuy Rjx Afwjit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.100 mm, skupna širina: 3.100 mm, hod: 950 mm, premer stebra: 130 mm, minimalna višina orodja: 900 mm, vpenjalna sila: 35.000 kN, pritisk: 400 letvica, Instalirana in zagnana samo v suhem načinu (preskusni zagon, brez proizvodnje). Gijdpfjygxr Rjx Afwet - Dvoplatenska stiskalnica - Največja zapiralna sila: 35.000 kN - Vbrizgalna sila: pribl. 390–420 kN (odvisno od velikosti bata) - Premer bata: Ø130 mm - Hod bata: 950 mm - Teža brizga (Al): 6,5–8,5 kg, odvisno od bata - Projekcijska površina pri 400 bar: 8.750–9.000 cm² (izračunano na osnovi zapiralne sile 35.000 kN) - Velikost plošč (V × Š): 3100 × 3100 mm - Razdalja med vodilnimi stebri (V × Š): 1950 × 1950 mm - Višina orodja (min / maks): 900 / 1350 mm - Hod odpiranja orodja: 1200 mm Støtek sistem taljenja z: - Støtek SMG 3.0_7.0 dvokomornim plinskim talilnim jaškovnim pečem z dvižnim dvigalom za polnjenje ingotov, talilna zmogljivost peči pribl. 1,5 t/h - Støtek DTI 6020 zadrževalni peč s Fuco-Heg MBS 2000 postajo za obdelavo/tretman taljene kovine - Støtek AMET 1700 dozirni peč Die-casting stroj LK Impress Plus DCC 3500 s: - Siemens PLC S7-1500 krmiljenjem - ABB IRB 6650S robot za nanos ločilnega sredstva za orodje - Wollin OSA 15-2-C sistem za dovod in brizganje ločilnega sredstva - AED 181-080 sistem za redčenje maziv za litje - Fondarex Highvac Premium 2C 200 vakuumski sistem za tlačno litje z zračnim rezervoarjem in vakuumskimi črpalkami - 5× IECI PFN 330 2-Z enot za temperaturno kontrolo olja - 5× IECI PF-ZH 1802-Z enot za temperaturno kontrolo vode - KMA Ultravent UV 20000EE sistem za odsesavanje izpušnih plinov in filtracijo - ABB IRB 7600 robot za razkladanje iz stroja za tlačno litje, nalaganje/razkladanje iz obrezovalne stiskalnice in nalaganje v hladilno postajo - LK WB-100 obrezovalna stiskalnica 1.000 kN s transportnim trakom za obrezke - ABB robot za razkladanje iz hladilne postaje, lasersko označevanje in izhodni transport - Keyence MD-X 1500C 3-osni sistem za lasersko označevanje - Izhodni transportni trak s hladilnim tunelom Na voljo je tudi količina rezervnih delov.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: NON, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 13.000 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.300 mm, Nazwa produktu: Jednostronna pionowa maszyna kwadratowa MHL13000 Maksymalna długość obróbki: 13 000 mm Maksymalna szerokość obróbki: 1 300 mm Gedpexgb Iaofx Afwjit Maksymalna grubość obróbki: 230 mm Nominalne ciśnienie układu hydraulicznego: 16 MPa Główny cylinder dociskowy (średnica cylindra x skok): φ100 x 100, 34 szt. (razem 34 cylindry) Boczny cylinder dociskowy (średnica cylindra x skok): φ50 x 150, 34 szt. (razem 34 cylindry) Boczny cylinder podnoszący (średnica cylindra x skok): φ63 x 400, 8 szt. (razem 8 cylindrów) Typ bocznej płyty dociskowej: Jednostronna stopka dociskowa Moc silnika hydraulicznego: 5,5 kW Układ hydrauliczny: Sterowanie ręczne przyciskowe z funkcją podtrzymania ciśnienia oraz automatycznego doładowania ciśnienia Wymiary (D x S x W): 13 300 x 1 300 x 2 300 mm Waga netto: ok. 15 t 1. Zawór przelewowy i elektrozawór zwrotny: Zhenping Hydraulics 2. Pompa olejowa i silnik: Shanghai Volkswagen + Guangdong Juntai 3. Cylinder olejowy i przewód olejowy wysokociśnieniowy: Zhengtian, ręczna produkcja, stabilna jakość i wysoka trwałość 4. Uszczelnienie cylindra olejowego: Taiwan Dingji (wysokowydajne uszczelnienie)

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: nepreverjeno, For sale: semi-automatic capsule filling machine for capsule production, currently set up for size 0 capsules, complete with vacuum pump. Also included: a semi-automatic capsule counter that automatically counts the set quantity of capsules when packaging is placed underneath. (Both devices are sold together as one inseparable set) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot guarantee the exact technical condition of the capsule filler—when connected to power, all motors run properly, but this should be verified. The capsule counter has been checked and works correctly, quickly counting the preset quantity (multiples of 5 units). Details below: Capsule Filler: • Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd • Model: DJ-C Semiautomatic Capsule Filling Machine • Year of manufacture: 2015-07 • Country of origin: China • Capacity: up to 10,000–25,000 capsules/hour • Machine weight: 330 kg • Power supply: 400V 50Hz (3-phase) • Power: 3.1 kW • Manufacturer's warranty: expired • Availability: ready for pickup (to be confirmed) • Dimensions: 135 × 70 × 160 cm • Note: the capsule filler has visible dents in the casing shown in the photos (caused during transport), but the working components are not damaged. Capsule Counter: • Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd • Model: HA-1 Capsule Counting and Filling Machine Gijdpfx Aew D Et Dofwst • Year of manufacture: 2015-07 • Country of origin: China • Capacity: up to 10,000–25,000 capsules/hour • Machine weight: 330 kg • Power supply: 220V 50Hz (1-phase) • Power: 60 W • Manufacturer's warranty: expired • Availability: ready for pickup (to be confirmed) • Dimensions: approx. 150 × 70 × 50 cm The listed price is net. VAT invoice will be issued. For companies in the EU: 0% VAT for intra-community supply. Assistance with organizing transport to the customer is possible. This is a private listing; price and availability must be confirmed prior to sale. The equipment bears the CE marking (instructions and other documentation are not available). We reserve the right to change or withdraw the listing at any time without prior notice. This listing does not constitute a commercial offer within the meaning of commercial law.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), DOUBLE-SIDED MILLING MACHINE RMD 6030M MINIMUM LENGTH OF WORKPIECE: 250 MM MAXIMUM LENGTH OF WORKPIECE: 3000 MM Minimum thickness - 5 mm Giedjiu Ia Njpfx Afwst Maximum thickness - 85 mm Tools: - Scoring unit adjustable vertically, horizontally, and at an angle; outer diameter 160-180 mm, bore 25.4-40 mm (with adapter) - Trimming unit - Milling cutter adjustable up and down, left and right, and at an angle. The machine comes complete with an infeed and outfeed table (shown in a separate photo). For any questions, please contact us. The machine is virtually unused.

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, This machine, model KM13, cuts electric cables with a diameter ranging from 20 to 120 mm. The different diameters can be easily adjusted by turning the hand wheel up or down. The machine operates at a speed of 25 m/min. Its dimensions are: length 600 mm, width 600 mm, and height 1600 mm. The machine weighs approximately 200 kg. It is powered by a 380V-50Hz, 3 kW electric motor with a reduction gearbox. The cable is cut from both sides, allowing the copper core to be easily removed. Gsdpfxsq E Ti Hj Afweit Spare parts such as blades, drive components, bearings, etc. are available as well. If desired, we can also perform maintenance on these machines. This is a machine that is ready to use immediately and easy to operate. If you would like to test it, please bring your own cable.

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Horizontalni flow pack stroj. Uporabljal se je za pakiranje riževih krekerjev približno 6 let. Zadnja 3 leta ni bil v uporabi, a je bil vzdrževan in je še vedno popolnoma funkcionalen. Priloženi so dodatni deli za sistem kotnega podajanja. Giedpfjw Rpyyex Afwet

Leto izdelave: 2026, stanje: novo, - Output: 300 3-liter bags per hour. - Suitable for hot and cold filling of bags from 0.5 to 220 liters. Gijdsflriuspfx Afwjt - Compatible with bags featuring various types of closures. - Integrated buffer tank for hot filling operations. - Buffer tank equipped with float for level monitoring. - Option to evacuate air from bags prior to filling. - Touchscreen control panel. - Volume repeatability with a deviation of ± 0.5%. - Easily adjustable filling table accommodates different bag sizes. - Stainless steel roller conveyor work surface is easy to clean and allows gentle handling of bags. - Easy to clean after operation. - Mounted on swivel castors for mobility. - We also offer fully automatic bag-in-box filling machines.

Leto izdelave: 2026, stanje: novo, The washing elevator milling system is constructed from stainless steel. First, the machine operator pours fruit and vegetables with clean water into the washing tank. A conveyor belt lifts the products up to the mill. During the lifting process, water nozzles spray the fruit and vegetables with clean water. The machine grinds the fruit and vegetables into pulp. Finally, the fruit and vegetable pulp exits the mill. Output: 3,000 kg/h. - The machine's grinding head is round, ensuring that all processed pulp flows directly out for further processing. This feature greatly aids in cleaning the head, as there are no corners. Gsdpfjflpmksx Afweit Our round-shape technology surpasses that of other manufacturers, as a significant amount of pulp can remain in the corners of square heads for hours, causing juice fermentation! - The machine includes an additional table in front of the tank for placing fruit or crates, making it easier to load products into the tank. - The V-shaped washing tank helps direct fruit and vegetables onto the conveyor, minimizing product remaining in the tank. - The integrated water spray system provides additional washing when fruit is lifted onto the conveyor belt. - The belt conveyor is equipped with a water drainage and speed control system. - Conveyor belt speed can be adjusted from the control panel. - Optional interchangeable graters/screens are available for various fruits and berries. - The mill does not damage fruit seeds. - The machine is easy to clean after use. - The powerful 2.2 kW grinding motor can process a variety of fruits, berries, and vegetables – from soft raspberries to hard apples, beets, etc. The entire machine is made of stainless steel.

Leto izdelave: 2026, stanje: novo, The washing and elevator milling system is constructed entirely of stainless steel. The operator first pours fruit and vegetables, together with clean water, into the washing tank. A conveyor belt lifts the produce to the mill. During this elevation process, water nozzles spray the fruit and vegetables with clean water. The machine then mills the produce into mash. Finally, the fruit and vegetable mash exits from the mill. Capacity: 1,000 kg/h. - The machine’s milling head is round, so all of the crushed mash is discharged directly for further processing. This feature significantly facilitates cleaning the head because there are no corners. Our round-shape technology outperforms other manufacturers, as substantial amounts of pulp can remain for hours in the corners of square heads, causing juice fermentation! - The machine is equipped with an additional table in front of the tank for placing fruit or crates, making it easier to load produce into the tank. - The V-shaped washing tank directs fruit and vegetables straight onto the conveyor, minimizing leftover produce in the tank. - The integrated water spray system provides additional washing as the fruit is lifted onto the conveyor. - The belt conveyor features a water drain and speed control system. - Conveyor belt speed can be adjusted via the control panel. Godpfx Afeflpfbjwsit - Optional interchangeable graters/screens are available for various types of fruit and berries. - The mill does not damage fruit seeds. - The machine is easy to clean after use. - The powerful 2.2 kW milling motor can process a wide range of fruits, berries, and vegetables—handling anything from soft raspberries to hard apples, beets, and more. The machine is constructed entirely of stainless steel.

Leto izdelave: 2026, stanje: novo, Majhna, namizna polavtomatska polnilna naprava za Bag in Box je enostavna, ekonomična in mobilna rešitev za polnjenje tekočin v Bag in Box ali Stand up Pouch embalažo. Vrečko ali vrečko vstavite v polnilec in potegnete ročico – embalaža se samodejno napolni. Ročico vrnete v začetni položaj, zaprete vrečko in postopek polnjenja je končan. - Zmogljivost ~250 kosov 3-litrske embalaže (odvisno od črpalke). Gijdeh S H A Ispfx Afwet - Teža stroja je le 50 kg, zato je posebej enostaven za premikanje ali prevoz med različnimi obrati. - Stroj je na voljo v dveh različicah: z ali brez črpalke. Če kupite stroj brez črpalke, lahko priključite svojo črpalko ali pa embalažo polnite gravitacijsko. - Možno je vroče ali hladno polnjenje vrečk in embalaž od 0,5 do 20 litrov. - Naprava je primerna za polnjenje tako Bag in Box kot tudi stand up pouch embalaž z ventilčkom. - Polnilna naprava Bag in Box pred polnjenjem predvakuumira vrečke in embalaže. - Stroj je opremljen z zaslonom na dotik in večjeziškim menijem. - Ponavljivost volumna z odstopanjem ±0,5 %. - Polnilna miza je enostavno nastavljiva za različne volumne vrečk in embalaž. - Delovna površina mize je sestavljena iz transportnih valjev, ki jih je preprosto čistiti in omogočajo lažje drsenje vrečk in embalaž. - Polnilec je enostavno očistiti po delu – omogoča tako zunanje čiščenje kot CIP čiščenje. - Naprava je zanesljiva, preprosta in enostavna za uporabo ter vzdrževanje.

Leto izdelave: 2026, stanje: novo, Stroj omogoča popolnoma avtomatsko polnjenje Bag in Box vreč z medsebojno povezavo (webbed). Po vstavljanju prve vreče stroj odstrani pokrovček, napolni tekočino in ponovno zapre vrečo. Nato sprosti napolnjeno vrečo in vzame naslednjo za polnjenje. Na ta način je proces polnjenja neprekinjen, operater pa mora iz stroja le pobrati napolnjeno vrečo. Giodjq Nl A Repfx Afwjt Za polnjenje posameznih Bag in Box ali Pouch vrečk vstavite embalažo v stroj in pritisnite gumb START – stroj samodejno odstrani tap, izsesa zrak, napolni vrečko s tekočino in jo zapre. Kapaciteta: ~2000 l/h -Idealno za polnjenje različnih tekočin: sok, vino, mleko, juha, olje, milo itd. -Enostaven za uporabo, mehanizem opravi vse postopke avtomatsko. Vreče je mogoče v stroj dovajati ročno (posamezne vreče ali vrečke) ali avtomatsko (vreče v traku/webbed). -Primeren za vroče in hladno polnjenje. -Stroj polni Bag in Box vreče v velikostih od 1 do 30 L, Stand up Pouch embalaže v velikostih od 0,75 do 5 L. -Stroj polni embalažo z zapiralom na pipico (tap closure). Možno je polniti tudi pakiranja z drugimi tipi zapiral po naročilu. -Laserski varnostni mehanizem ščiti roke in okončine z avtomatično zaustavitvijo ter prekinitvijo procesa polnjenja v primeru nesreče. -Stroj je izdelan iz nerjavečega jekla (AISI 304). -Dotik zaslona in večjezični meni omogočata enostavno upravljanje. -Napaka ponovljivosti prostornine je le ± 0,3 %. -Možna je namestitev dodatne polnilne mize, ki se premika pod osnovno mizo za polnjenje večjih vreč (20–30 L). -Polnilnik je po delu preprosto čistiti, omogočeno je zunanje in CIP čiščenje. -Delovna površina mize je sestavljena iz valjčnih transporterjev, ki so izjemno enostavni za čiščenje. -Vsi deli imajo zaščito IP 65 pred vodo.

Stanje: novo, Leto izdelave: 2026, Mobilna linija za predelavo sadja je zasnovana tako, da priročno vključuje vse stroje, potrebne za proizvodnjo soka in nemoten potek dela. Vsebuje: - Pralni, dvižni in mlin MAXIMILL 3000 za sadje in zelenjavo - Trakasti preša POWERPRESS 1500 - Transporter za preostalo drozgo - Posode iz nerjavnega jekla - Diesel pasterizator - Polavtomatski polnilnik Bag in Box - Filtri za sok - Pomivalno korito z delovno mizo iz nerjavnega jekla Giedpfx Aoq Nl Afsfwet Kapaciteta: 1500 kg/h. Druge razpoložljive kapacitete: 400 kg/h, 800 kg/h, 1200 kg/h. Lastnosti: - Mobilna linija za sok združuje vse potrebne stroje za predelavo sadja in proizvodnjo soka na enem mestu. - Za upravljanje celotne linije je potrebna le ena oseba. - Ključna prednost je mobilnost, ki odpravlja stroške za prostore in omogoča zamenjavo lokacije. - Pridelek soka iz jabolk je približno 75 %. - Vsi stroji so med seboj povezani in se avtomatsko upravljajo. - Mobilna enota vključuje Bag in Box polnilnik, ki omogoča polnjenje soka v vrečke Bag in Box ter Stand up Pouch. - Mobilno linijo je mogoče prilagoditi zahtevam naročnika. - Linija je enostavna za uporabo in vzdrževanje. - Mobilna linija za predelavo sadja je vgrajena v posebej izdelano prikolico, ki se lahko enostavno odpre za delo in zapre po potrebi. - Največja prednost naše mobilne linije za predelavo sadja je možnost proizvodnje soka kjerkoli želite. Tako se izognete dodatnim stroškom za prostore in imate možnost spreminjanja lokacije. Mobilnost je ključni vidik, ki uporabniku omogoča številne možnosti, kot so razvoj storitve stiskanja soka na različnih sadovnjakih ali v različnih mestih.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 25 t, Oprema: dvostranski, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, removes defects, presses, and cuts to length. This unique process creates a clean joint that requires no further finishing. About the Finger Jointer When feeding wood into the machine, defects such as knots or cracks can be marked with a fluorescent wax crayon. The machine removes these defects, including the marked lines. For example, to produce claddings or panels free from knots or holes. Prior to profiling and pressing, the wood is positioned statically, laterally secured, and clamped precisely against a reference surface at the top. This ensures an extremely accurate finger joint connection with a smooth surface at the joint and a straight finished product. Due to this precision, the wood (for most applications) does not require further planing or sanding. The adhesive applicator is mounted on the carriage with the profile cutters. During the return stroke of the profiling carriage, adhesive is applied. Using PU adhesive ensures a highly durable bond, suitable for outdoor use and damp environments. While most other finger jointing machines feed the wood transversely (at a right angle) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally through the machine. This allows for the processing of long lengths up to 6 meters or more. As a result, the machine can process all of the wood, including longer lengths, and fully utilize it (except for the defects) in the finger-jointed final product. This way, quality wood is not turned into short waste pieces. Whereas other finger jointers focus on recycling short offcuts, the Marinus eliminates the production of offcuts. The Marinus Finger Jointer contributes to an efficient and sustainable manufacturing process. Technical Data: Gjdpfjp R Iwhox Afweit Feed lengths: 450 – 6000+ mm Feed widths: 50 – 300 mm Feed thicknesses: 8 – 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machine is designed and manufactured at our facility in the Netherlands and will be supplied new ex works. The machine is equipped with an online remote maintenance system. We provide worldwide customer support. This offer on Machineseeker was also created by us: Marinus Machinery.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, delovna širina: 200 mm, The Marinus Powermax Chevron was specifically developed for producing tongue and groove profiles on the ends of Hungarian herringbone parquet boards (Chevron). Multiple wooden parquet boards can be loaded into the input housing, after which the process runs automatically. First, the boards are pre-cut to the correct length and angle in the cross-cut saw unit and then transported via conveyor belt to the Chevron machine. Before profiling occurs, the wood is laterally clamped in a stationary position and pressed against a precise reference surface on top. This ensures high profile accuracy, with no visible edges on the surface when the boards are fitted together. The two arms that move the profiling heads back and forth are built extremely robustly and are powered by servo motors. This ensures that all boards have exactly the same length and angle. Length and angle adjustments are continuously variable via the user-friendly touchscreen panel. This clamping system, in combination with two pre-cut aluminum support blocks, effectively prevents breakout and splintering. Gijdpfx Afoiv R Hhewjt Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angles: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine was designed and manufactured in-house at our company in the Netherlands and is supplied new, ex works. The machine is equipped with an online remote maintenance system. We offer worldwide customer support. This listing on Machineseeker was also created by us: Marinus Machinery.

Stanje: novo, Leto izdelave: 2026, The Marinus Powermax Endmatcher has been designed for end processing of tongue-and-groove on parquet flooring, decking boards, and cladding and produces both fixed and variable lengths. It can be used with any type of wood: hardwood, softwood, or engineered wood products. The machine can cut the wood to length in a single pass, trim out defects, and profile the end face. When loading the wood into the machine, defects such as knots or cracks can be marked with a fluorescent pen. The machine then cuts out these defects, including the areas marked by the pen. Lengths: 450 – 6000+ mm Gijdpfsf Hkgpex Afwet Widths: 50 – 300 mm (optional width of 400 mm or 500 mm) Thickness: 8 – 45 mm Capacity: up to 20 pieces/min. Length modes: Random / Defined / Optimization in 10 cm increments This machine is developed and built by our company in the Netherlands and is supplied new from our factory. The machine is equipped with an online remote maintenance system. We offer worldwide customer support. This listing on Machineseeker is also from us: Marinus Machinery.

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 345117, Magic-Skin 5035EV polavtomatski stroj za skin pakiranje. Velikost plošče: 495 mm x 345 mm. Največja višina izdelka: 100 mm. Čase zadrževanja, ogrevanja in vakuuma nastavljajo časovniki, vgrajena lastna vakuumska črpalka. Opremljen z vnosno/iznosno mizo in dobavljen kot samostoječa enota na 4 kolesih, od tega 2 z zavoro. (Barva premaza: modra) Zahteve za napajanje: 230V, enofazno, modri 3-pinski vtikač 16A. Skupne mere (d x š x v): 1810x965x1450 mm. Gedpfx Afsywu Hgowsit

Stanje: novo, Leto izdelave: 2025, skupna masa: 6.500 kg, moč: 75 kW (101,97 KM), premer gredi: 1.200 mm, trajanje garancije: 12 meseci, The ERP Series – Eco Recycling Plant is Mizar’s latest innovation in cable recycling, designed to deliver maximum performance with minimal energy consumption. This compact and powerful system is based on two main components: the FGR – Fine Granulator and the DES – Densimetric Separator. Together, they provide an advanced, environmentally friendly solution for high-purity separation of metals and plastics. The ERP Series stands out for its low energy consumption, optimized material flow, and precise separation technology – all integrated in a space-saving design. Whether as a standalone solution or as part of a larger line, ERP offers efficiency without compromising on quality. Operators benefit from an intelligent, PLC-controlled touchscreen interface that enables easy operation and real-time monitoring. All components are CE-certified and manufactured from high-quality materials for long service life. Godpexb A S Nofx Afweit The ERP Series is available in three sizes to suit different requirements: ERP S1, ERP M1, ERP L1. With the ERP Series, you achieve maximum recovery rates, highest material purity, and energy-efficient operation – all in one environmentally conscious system.

Stanje: novo, Leto izdelave: 2025, Rezalniki za reciklažo kablov iz serije Mizar Compact so zasnovani za učinkovito recikliranje kablov različnih premerov in materialov. S postopkom drobljenja kablov ločujejo kovinske in plastične komponente ter zagotavljajo največji izkoristek materiala. ✅ Učinkovita reciklaža kablov in radiatorjev – Učinkovito loči kovine in plastiko. ✅ Turbo mlin tehnologija (CMT modeli) – Omogoča višjo čistost z popolnim ločevanjem finih bakrenih žic. ✅ Kompaktna zasnova – Idealna za obrate z omejenim prostorom. ✅ Energetska učinkovitost & stroškovna ekonomičnost – Zmanjšuje obratovalne stroške. 🔸 Reciklirani materiali: ✔ Kabel ✔ Radiator 🔸 Tehnične specifikacije 🔹 CMT Moč: 20 kW Motor granulatorja: 11 kW Rezila granulatorja: 3+2 Dolžina: 1300 mm Širina: 1500 mm Višina: 2140 mm Gisdpfx Afov Hbdrowst Teža: 1380 kg

Stanje: novo, Leto izdelave: 2025, skupna širina: 780 mm, skupna dolžina: 1.240 mm, skupna višina: 1.330 mm, skupna masa: 480 kg, Stroj za odstranjevanje kablov CBR A3 je posebej zasnovan za odstranjevanje zunanjega izolacijskega materiala s kablov vseh velikosti, kar olajša odstranjevanje prevodnega materiala v notranjosti. Ta serija ponuja vrhunsko zmogljivost na; kable z jeklenim oklepom (SWA), Gijdpfxsff H Imj Afwjt kabli z dvojno jekleno prevleko, jeklene trakove, kabli, prevlečeni s PVC, kable, prevlečene s svincem, debeli kabli, prevlečeni z gumo, kabli, prevlečeni z najlonom, nizkokakovostni kabli, TT kabli in drugi. Posebej obdelana rezila z edinstveno zasnovo omogočajo dolgotrajno rezanje in odstranjevanje kablov poljubne dolžine, ne da bi se rezila obrabila. Vse električne in elektronske komponente v seriji CBR A3 so znamke Siemens. Naši izdelki so izdelani in certificirani v skladu s standardi CE in EAC. Tehnične specifikacije MOČ 5,5 KW dimenzije kabla 1-120 mm Hitrost rezanja 25 m/min DOLŽINA 1240 mm ŠIRINA 780 mm Višina 1330 mm TEŽA 480 kg

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Na voljo so 4 enote tega modela. Gjdeya D Iqepfx Afwjit

Stanje: novo, Leto izdelave: 2025, skupna širina: 1.200 mm, skupna dolžina: 2.500 mm, skupna višina: 2.080 mm, skupna masa: 3.700 kg, Multi Destroyer je stroj, posebej zasnovan za drobljenje tiskanih vezij (PCB – Printed Circuit Board). Dvojna grednica (dvojna osovina) na vrhu učinkovito razreže PCB-je in jih transportira v granulirnik pod njo. Granulirnik predhodno zdrobljen material pretvori v fine granule, kar omogoča lažjo reciklažo in ponovno uporabo. Dvojna grednica uporablja posebna rezila iz obrabno odpornega jekla, kar zagotavlja maksimalno vzdržljivost in učinkovitost. Dovod materiala je mogoče enostavno nastavljati prek uporabniku prijazne nadzorne plošče. Granulirnik je optimiziran za visoko učinkovitost ter zagotavlja končni izdelek želene velikosti. Gedpfefm E E Aex Afweit Multi Destroyer uporablja prekinitveni filter (jet filter) za minimalizacijo nastajanja prahu in s tem zagotavlja čistejše in varnejše delovno okolje. To je še posebej pomembno pri občutljivih reciklažnih postopkih. Multi Destroyer je idealna rešitev za reciklažo tiskanih vezij, saj z visoko zmogljivostjo izpolnjuje industrijske zahteve. Njegova vrhunska inženirska zasnova zagotavlja dolgo življenjsko dobo stroja in visoko odpornost na obrabo.

Stanje: novo, moč: 120 kW (163,15 KM), skupna masa: 6.500 kg, Leto izdelave: 2025, Serija CUA učinkovito loči notranje in zunanje komponente kablov za namen reciklaže. Integriran sistem, sestavljen iz enot za granulacijo, ločevanje in ventilacijo, učinkovito drobi in loči 99,6 % snovi iz kablov. Materiali se lahko vnašajo ročno prek transportnega traku ali avtomatsko s pomočjo preduporabnega stroja serije SSH, ki je opremljen s pametno PLC programsko opremo. Zaradi kompaktne zasnove in uporabniku prijaznega nadzornega panela z zaslonom na dotik je upravljanje enostavno. Serija CUA zagotavlja dolgo življenjsko dobo z visokokakovostnimi komponentami in ima CE certifikat. Na voljo so trije modeli: CUA S3, CUA M3 in CUA L3. Gijdpfjd R Slaex Afwjt