Kgm nakup rabljenega (176)

Stanje: novo, Leto izdelave: 2025, TEMP 90 W9 SSR General Information: - Maximum temperature range: 90°C water - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Immersion pump (manufacturer: Speck) with pressure/vacuum function (leak stop mode) - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: 12 litres - Brass/stainless steel fittings - Automatic water refill - Electronic level control - Indirect cooling system (plate heat exchanger) - Cooling capacity: ~40,000 kcal/h (10 plates) - Display pressure gauge - Integrated bypass - Solenoid valves for cooling and refill Redpfx Afjd Aaruoaew Electricals and Controls: - Electronic, self-optimizing PCB controller - Control voltage in unit: 24 V AC - Acoustic and visual alarm display - Solid state relays - Safety thermostat - Sensor break monitoring - Monitoring for hose rupture and leakage - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW Rjdpfx Aeddv Itsfasw - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 Rsdpfx Afsw E H E Reaow - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° Rsdpfx Afewh Rp Eoasw - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC Rsdjxdm Awepfx Afasw - Total connected load: 26 kW

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 10.800 kg, nosilnost na odsek shranjevanja: 2.790 kg, višina okvirja: 3.750 mm, gradbena širina: 1.000 mm, Good day, We hereby offer you, without obligation, a used pallet rack warehouse (multi-position system) from the manufacturer Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: unknown Frame load capacity: max. 10,800 kg Shelf load capacity per level: max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (crossbeam length): 3,100 and 3,400 mm Scope of delivery: 44 pcs. uprights 3,750 x 1,000 x 100 mm (H x D x W) 215 pcs. beams 3,100 mm 14 pcs. beams 3,400 mm 14 pcs. upright impact protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pcs. upright impact protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pcs. floor impact protection corners, green, 500 x 120 mm 13 pcs. floor impact protection corners, yellow, 450 x 110 mm 1 pc. floor impact protection corner, yellow, 450 x 180 mm 2 pcs. upright impact protection for double rows, plate 300 x 250 mm, upright height 350 mm 24 pcs. frame load distributors 1020 x 110 x 45 mm 60 pcs. frame base plates, as new 21 pcs. frame base plates, used, good condition 10 pcs. mesh shelves for beams, galvanized, 2900 x 1020 x 40 mm 19 pcs. mesh shelves for beams, galvanized, 2625 x 1020 x 40 mm Various smaller pieces of mesh shelves for beams, galvanized 1 lot of spacer plates for OMEGA crossbeam feet 1 pallet of frame connection profiles, 900 x 30 x 24 mm Rsdpfxoyz A Sxo Afasw Note: The above technical data were taken from the operating manual, manufacturer’s brochures or other sources. We cannot guarantee the accuracy or completeness of this information. We would be pleased if this pallet rack warehouse is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Good day, We are pleased to offer you, without obligation, a used, complete pallet racking warehouse (multi-position system) from Galler, type OMEGA. Manufacturer: Galler Lager- u. Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Bay width: 2,700 mm Shelf load capacity: 1,500 kg Bay load capacity: 1,500 kg Brace length: 1,850 mm Frame height: 3,600 mm Max. running length: approx. 179 linear meters Scope of supply: - 64 uprights, 3600 x 1100 x 100 mm (H x D x W) - 100 beams, 2700 x 100 x 70 mm (L x H x W) - 2 beams, 1850 x 100 x 70 mm (L x H x W) - 16 collision protection elements for single-row racking, 1230 x 240 x 400 mm (L x W x H) - 2 collision protection elements for double-row racking, 2600 x 240 x 400 mm (L x W x H) - 22 push-through protection mesh elements, 3600 x 1100 x 100 mm (H x D x W) Redpfx Afsyz A Itjaew Note: The above technical data was taken from the operating manual, manufacturer’s brochures, or other sources, for the accuracy and completeness of which we cannot assume any liability. We would be pleased if this pallet racking warehouse is of interest to you. Yours faithfully, The Service Team Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DRI 04320080, prevoženi kilometri: 100 km, skupna masa: 7.000 kg, vrsta goriva: dizel, barva: modra, obratovalna teža: 14.000 kg, največja dovoljena obremenitev: 15.000 kg, stanje verige: 50 odstotek, Premer palice (maks.): 61 mm, Premer cevi (maks.): 400 mm, Oprema: gumene gosenice, hidravlično kladivo, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/clamping force of 15 tons plus percussion (28 tons) from a hydraulic hammer. Rubber tracks, maximum speed 3 km/h. Suitable for installation of pipes up to Ø 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, Year: 2004, 7,800 operating hours. Main components and assemblies: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod boxes (each box contains 48 rods x 3 m) = 144 rods (432 meters) Operating options: 1. Rod manipulator for automated rod handling 2. Semi-automatic rod clamping/pulling system Mixing unit (8056D) with hydraulic powerpack (TT-M2), DRI 8904.B DEUTZ 4-cylinder diesel engine, bentonite pump R-72, two bentonite preparation tanks of 4,000 liters each, two BÖRGER rotary pumps for mixing Connecting cable to mixing unit Bentonite hose reel 2 drilling heads Redpfx Afsy H H Uujaow Ø110 reamer, 5t swivel Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, bushing) Price incl. VAT.

Stanje: rabljeno, Machine Description: Spiral Conveyor Manufacturer: PURATEX Anlagetechnik GmbH Model: SS D 280 R / 6150 Year of manufacture: 2008 Rotational speed: 28 rpm Trough width: 280 mm Conveying length: 6150 mm Rodpfx Aerpmgfefaew Screw diameter: 240 mm Suitable for conveying / dosing: Sewage sludge or similar sludge Drive motor: 3 kW Conveying capacity: 3 kW Dimensions: L 6,600 x W 400 x H 1,600 mm Unladen weight: 800 kg Technical documentation: Yes Remarks: Trough made from stainless steel, spiral made from standard steel, pitch angle 22°, throughput for sewage sludge 1.5 - 2.0 m³/h Accessories: Slewing ring (swivelling) Condition: Used Price: On request

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: K 1283, A used bending machine from manufacturer HMK. Pressing force up to 500 t Year of manufacture: 1989 Machine number: 1283 Rodpfxod Eg R To Afajw

Leto izdelave: 2025, stanje: novo, Naravna kavčukova membrana ali silikonska membranska plošča Na področju izdelave 3D pohištvenih front vam nudimo tudi rešitve za preše, stroje za rezanje folij, vertikalne skladiščne sisteme za folije ter čistilne stroje! MEMBRANA za membranske preše – iz silikona ali naravnega kavčuka Najvišja kakovost, primerna za vsako membransko prešo (preše za folijo in furnir). Rjdpei E Hp Tjfx Afaew Naše membrane lahko prejmete že narezane na želene mere ali kot blago v rolah. NARAVNI KAVČUK Tip: RM-2 Barva: siva Površina: gladka/gladka Standardne širine: 1700 in 2000 mm Kavčuk: naravni kavčuk Trdota: cca. 42°Shore Debelina: 1,8 mm, 2,5 mm in 4 mm Obratovalna temperatura: min.-20°C/max.+130°C

Stanje: novo, Leto izdelave: 2026, TOP Storage Carousel for 3D Film Rolls Redpsff Huwofx Afaew Our film storage carousels are suitable for storing all types of film rolls. They can be used as high-bay storage at the membrane press or as a space-saving 3D film storage solution. With our carousels, a large number of film rolls (up to 32 rolls with a diameter of 300mm) can be stored on a minimal footprint of approximately 2.4m x 1.2m. The required film is available immediately at the push of a button. Our carousels are designed and available as standard models with heights ranging from 2.8 meters to 6.0 meters. We also offer custom solutions. Please contact us and we will find the right storage solution for you. As optional equipment, we offer centering sleeves, manual or automatic cutting devices, as well as ionization solutions. • Suspension rods ranging from Ø 42.4mm up to max. 76mm • Full-height side cladding • Protective grid from 2.2m above floor level up to the top of the carousel • Load chain as hollow pin chain, breaking strength 100kN, pitch 50mm = Suspension bar mounting grid, carousel speed approx. 5.5 m/min • Control via keyed switch with return spring (dead man’s control) for up/down operation • Rated voltage 400V; 3N; 50Hz, mains cable with CEKON plug 16A, external circuit protection 10A slow-blow • Attention! Installation requires a stable, level, and solid floor—no floating screed. Minimum floor load capacity must be at least 2.4kg/cm²

Stanje: rabljeno, Leto izdelave: 1974, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8002/6410, globina vrtanja: 1.000 mm, premer vrtanja: 30 mm, vrsta vhodnega toka: trifazni, moč vretenovega motorja: 21 W, dolžina mize: 1.000 mm, vhodna napetost: 550 V, montažni premer: 160 mm, število vreten: 1, zmogljivost vrtanja: 1.000 mm, premer tulec: 30 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Globinska vrtalna stroj za vrtine do 1000 mm globine in premera 30 mm, uporablja se za vrtanje aluminija, redno servisirana, vključuje veliko količino vrtalnih svedrov. Stroj je popolnoma delujoč in stalno v uporabi. Krmiljenje Siemens, Simatic PANEL, na voljo je dokumentacija. Rodpfx Asx Ehg Tefaew

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), An ultrasonic welding system with nine Telsonic ultrasonic units, an enclosure, nine generators, and documentation is available. Control system: Siemens SIMATIC PANEL. An on-site inspection is possible. Rjdpfxsuy T Nqe Afajw

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Max. bending diameter: 30 mm, on-site inspection is possible. Rjdpforc Hiijx Afaew

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, Rabljena kogeneracijska enota (CHP) Proizvajalec: 2G Energietechnik GmbH Model: G4076 Rodpfx Asyxl Uqefasw Motor: MAN plinski motor Električna moč: pribl. 400 kW Napetost: 400 VAC / 24 VDC Frekvenca: 50 Hz Leto: 2015 / 2017 Stanje: rabljeno, delujoče - popolna CHP enota - krmilna omara - krmilni sistem / HMI - plinski motor in generator - Dobava po pregledu Cena: 125.000 EUR / EXW (naloženo) Lokacija: Nemčija/Düsseldorf Dobava: EXW (Ex Works)

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 3 kN. User-friendly Windows software for universal test procedures; simple tests also possible without a PC. Made in Germany. Standard scope of delivery: • Machine with sensor (choice between 50 N and 3 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Rsdpfx Ajd H S Hisfajw Optional equipment: • Comprehensive clamping tools (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending devices Custom solutions according to customer specifications • Extensometers / strain gauges: Clip-on and long-travel extensometers • Temperature and climate chamber • Windows Software PM-Soft-Smart for universal applications, freely programmable • Commissioning and training

Leto izdelave: 2025, stanje: novo, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 5 kN. User-friendly Windows software enables universal testing procedures; basic tests can also be carried out without a PC. Made in Germany Standard configuration: • Machine with sensor (choose from 50 N to 5 kN) • Accuracy class 0.5 • Windows basic software • 2-year warranty Optional equipment available: • Comprehensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Rsdpfx Aod H S Rrofasw Screw and wedge grips Bending fixtures Special versions according to customer specifications • Extensometers: Clip-on and long-travel gauges • Temperature and climate chamber • PM-Soft-Smart Windows software for universal use, freely programmable • Commissioning and training

Leto izdelave: 2025, stanje: novo, Cost-effective dual-column microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 10 kN. User-friendly Windows software for universal testing sequences; simple tests can also be performed without a PC. Made in Germany Standard Equipment: • Machine with sensor (selectable between 50 N and 10 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Rjdpfx Ajd H S R Ujfaew Optional Equipment: • Extensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special designs according to customer specification • Extensometers: Clip-on and long-travel models • Temperature and climate chamber • PM-Soft-Smart software For universal applications, freely programmable • Commissioning and training

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Our horizontal form, fill and seal machine from the DEAPHS series is specifically designed for the filling of 3- and 4-side sealed sachets and Doypack pouches. Thanks to various dosing systems such as auger fillers, volumetric cup fillers, and multihead weighers, the machine reliably packages powdery, liquid, and granular products. The machine also independently manufactures the pouches to be filled directly from flat film, providing a cost-effective and efficient packaging solution. Thanks to the modular design of the form, fill, and seal machine, it can be easily and quickly converted or expanded. ✅ Perfectly suitable for food, pet food, pharmaceutical products, cosmetics, and other non-food items. ✅ Also ideal for filling small product quantities and samples – for example, in our mini pouches. ✅ Optional accessories such as volumetric cup filling systems, multihead combination weighers, piston fillers, and Hibar pump fillers available. ✅ Matching packaging material (pouches & film) also available from us. Redeum R Ezopfx Afajw Independent film unwind shaft: Ensures excellent control of film tension; flexible adaptation to film roll width and pouch specifications possible; improved Doypack shaping. Configuration: - Film unwind shaft - Bottom pouch sealing - Pouch bottom forming - Three horizontal sealing units - Two vertical sealing units - Servo-driven pouch pull-off - Mechanical pouch cutting - Vacuum pouch opening - Photocell control - LCD touch display - PLC – Panasonic - Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-phase, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 100 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 60 W, vrsta hlajenja: zrak, skupna masa: 135 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, dolžina območja skeniranja: 220 mm, širina območja skeniranja: 220 mm, potovalna razdalja osi X: 300 mm, Gravis Fiber Laser – Industrial Marking Laser Made in Germany | Automated & PLC Controlled The Gravis Fiber Laser is an industrial laser marking system for metal, plastic, nameplates, and serial numbers. Developed and manufactured in Germany, it combines maximum precision, robust mechanics, and flexible PLC control for 24/7 production operation. Technical Features • Power: 20 – 100 W • Galvo system with precise F-Theta optics • Working area: variable (100×100 mm up to 300×300 mm) • Integrated PLC with TCP/IP communication • Flexible software options: LightBurn / EZCAD / Beam Construct • CE-certified, low-maintenance, ready for immediate use — Rjdpfx Afjxvtt Heaow Advantages • Complete system “Made in Germany” – directly from the manufacturer • Custom machine construction & automation tailored to customer requirements • Integration into production lines (e.g., PLC or robot) • Perfect engraving results on stainless steel, aluminum, brass, plastic, tool steel, and more • German support, training & spare parts supply Delivery & Support • Delivery time: 4 – 6 weeks • Delivery, installation, and commissioning across Europe • Lifetime after-sales support Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Tool and automotive industry • Electronics, plastics processing, promotional items • Jewelry engraving, precision engineering, contract marking

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, laserska moč: 60 W, vrsta hlajenja: zrak, skupna masa: 35 kg, trajanje garancije: 12 meseci, dolžina območja skeniranja: 220 mm, širina območja skeniranja: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Serial Production & Automation GLT – Grossmann Lasertechnik GmbH Made in Germany • Automated • Industry 4.0 Ready The Integra Fiber Laser is a fully integrated laser marking system for industrial series production, engineered for high cycle rates, precision, and process reliability. Redpfx Afoxvtu Djaew Combining fiber laser technology, integrated PLC control, and a modular machine architecture, the Integra is ideal for production lines, custom-built equipment, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-Theta optics for maximum engraving speed • Work area: 100×100 mm to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: camera systems, pallet handling, conveyor integration • CE-certified, low-maintenance, suitable for continuous operation Advantages • Integration system “Made in Germany” – direct from the manufacturer • Custom machine engineering & automation to customer requirements • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminium, brass, plastics, and more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machine engineering Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation and commissioning across Europe • Lifetime after-sales support incl. remote maintenance

Leto izdelave: 2026, stanje: novo, Blago je načeloma projektno blago oziroma glede na razpoložljivost na voljo kot razstavni stroj. Uporaba: Doziranje prosto tekočih izdelkov v natančne količine. Lastnosti tehtnice - Enostavno upravljanje - Hitro in enostavno čiščenje - Nizki stroški vzdrževanja - Orodju neprijazna (de)montaža vseh formatnih delov v stiku z izdelkom - Nizki stroški vzdrževanja - Izvedba iz nerjavečega jekla (1.4301) - Krmilnik popolnoma integriran v ohišje stroja - Nastavljiv vibracijski sistem za optimalen potek proizvodnje - Visoka natančnost zaradi kombinacije Tehnični podatki - Število tehtalnih glav: 10 - Prostornina tehtalnega lijaka: 2,5 l Redpfsq T R Sbsx Afaow - Tehtalno območje: 10 – 1000 g / 2.500 g - Natančnost: ±0,2–1,5 g - Hitrost: 60 vrečk/min (odvisno od izdelka) - Upravljalna plošča: 7" zaslon na dotik - Moč: 1 kW / 230 V / 50 Hz - Dimenzije (D x Š x V): 1620 mm x 1100 mm x 1110 mm - Teža stroja: 380 kg

Leto izdelave: 2026, stanje: novo, Blago je načeloma projektno blago oz. na voljo kot razstavni stroj glede na razpoložljivost. Uporaba: Doziranje prosto tekočih izdelkov v natančnih količinah. Lastnosti tehtnice - Enostavno upravljanje - Hitro in brez težav čiščenje - Nizko vzdrževanje - Montaža in demontaža vseh delov, ki so v stiku z izdelkom, brez uporabe orodja - Nizki stroški vzdrževanja Redpfx Afshuahcoajw - Izdelava iz nerjavečega jekla (1.4301) - Krmilni sistem v celoti integriran v ogrodje stroja - Brezstopenjski vibracijski sistem za optimalen pretok izdelkov - Visoka natančnost s kombiniranim tehtanjem Tehnični podatki - Število tehtalnih glav: 10 - Tehtalni zabojnik: 1,6 l - Tehtalno območje: 10 – 1000 g / 2.500 g - Natančnost: ±0,2–1,5 g - Hitrost: 60 vrečk/min (odvisno od izdelka) - Nadzorna plošča: 7" zaslon na dotik - Moč: 1 kW / 230 V / 50 Hz - Dimenzije (D x Š x V): 1620 mm x 1100 mm x 1110 mm - Teža stroja: 380 kg

Stanje: novo, Leto izdelave: 2026, The goods are generally project-based, or available as a display machine depending on availability. Description - Optimal value for money - Easy operation and cleaning, low maintenance requirements - Manufactured from 1.4301 (stainless steel) - Color touch display - Operating software in German - System speed: 20–30 bags per minute, depending on product and filling weight - Bags of various sizes can be processed within specified dimensions. This requires simple manual adjustments for each format. Technical Data - Bag type: Doypack with zipper - Bag dimensions (LxW): 130–330mm x 100–200mm - Bag output: approx. 25–30 bags/min - Power: 4.5kW / 400V / 50Hz - Air requirement: 0.4 m³/min - Dimensions (LxWxH): 2,200mm x 1,100mm x 1,400mm - Weight: approx. 800kg Process 1. Doypacks are placed in the cassette magazine Rodpfxsq Umuuo Afaew 2. Bag picker removes the bag (via suction device) 3. Bag is transported to the filling position (bag monitoring) 4. Bag is opened with the zip opener 5. Bag is filled and securely held by a dedicated gripping system 6. Depending on configuration, the bag content may be compacted or treated with vacuum and gas flushing, etc. 7. Bag and zipper are closed and sealed 8. Bag discharge