Huber Ministat 240 Kompakter Kälte-Badumwälzthermostat Für Labor Und Industrie Sn:74948/07 nakup rabljenega (39.521)

Stanje: zelo dobro (rabljeno), Mettler Toledo Type: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermal Analysis System + GC401 + XP5U + Huber Ministat – incl. STAR software & dongle For sale is a complete, fully operational thermal analysis system from Mettler Toledo in the high temperature version (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: TGA/DSC 3+ (combined thermogravimetry + DSC) High-temperature furnace (HT, up to approx. 1600 °C) Sensor: FRS2 SDTA Gas controller: GC 401 Microbalance: XP5U Temperature control unit: Huber Ministat 230-MT (Pilot ONE) Software: STARᵉ Software Version 16.00b License: Hardware lock (USB dongle, green) Software & license: Included in delivery: STARᵉ software (version 16.00b) Original hardware lock (USB dongle) Functions: Thermogravimetry (TGA) – mass change (µg range) DSC / SDTA – heat flow measurement (mW range) Temperature analysis up to the high temperature range Measurements under defined gas atmosphere Technical data (extract) Temperature range: RT up to approx. 1600 °C Heating rate: typically 10 K/min Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: Temperature range: -40 °C to +200 °C Voltage: 230 V Power consumption: max. 11 A Dimensions & weight: Total weight: approx. 100–150 kg Multi-component system (laboratory equipment) Scope of delivery: Complete TGA/DSC system Rcjdpfxsyxcqvj Aqtef High-temperature furnace GC 401 gas controller XP5U balance Huber Ministat 230-MT STARᵉ software incl. USB dongle Documentation and accessories as shown in the pictures Important information: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: (see pictures) (Specifications and technical data are subject to change and error!) Further questions can gladly be answered by phone.

Stanje: pripravljen za uporabo (rabljen), Stator Heidenhain za motor QSY 155D EcoDyn ID: 339 881-84 SN: 29270302H, rabljen, dobro ohranjen, 100% delujoč, dobava skladno s fotografijami. Rodpfx Aqjzhqqmjtscf

Stanje: pripravljen za uporabo (rabljen), Siemensov stator za servomotor 1PH6105-4NF46, serijska številka: EF760695716006, uporabljen, dobro ohranjen, 100% delujoč, obseg dobave po slikah. Rcodpfszhqr Dox Aqtsf

Stanje: novo, Na prodajo profesionalni radialni ventilator (puhalo) priznane nemške blagovne znamke Elektror Karl W. Müller. Naprava je v skladiščnem stanju, robustna industrijska konstrukcija, namenjena za uporabo v prezračevalnih in odpraševalnih sistemih. Rcsdpfjyuqr Ejx Aqtsf Ventilator se uporablja v: • sistemih za odpraševanje • odsesalnih sistemih • prezračevalnih sistemih • lesni in kovinski industriji • sistemih za transport zraka Tehnični podatki: • Proizvajalec: Elektror • Model: 2D 07 • Moč: 4,5 kW • Napajanje: 400 V / 50 Hz • Obrati: 2930 obr/min • Zmogljivost: ca. 94 m³/min (5640 m³/h) • Tlak: ca. 1,2 kPa

Stanje: pripravljen za uporabo (rabljen), Siemensov stator za servomotor 1FT6086-1AF71, SN: EL695420801002, rabljen, dobro ohranjen, 100% brezhiben, dobava v skladu s fotografijami. Rcjdpfozhdt Ijx Aqtof

Stanje: pripravljen za uporabo (rabljen), Siemensov stator za servomotor 1FT6086-1AF71, serijska številka: EL695420801003, rabljen, dobro ohranjen, 100 % funkcionalen, dobava kot na slikah. Rcedpfxszhdt Us Aqtef

Stanje: pripravljen za uporabo (rabljen), Stator Siemens za servomotor 1FT6105-1AC71, serijska številka: YFSN31215601002, rabljen, v dobrem stanju, 100 % delujoč, dobava v skladu s fotografijami. Redpfx Aszg Sbdeqtocf

Stanje: pripravljen za uporabo (rabljen), Siemensov stator za servomotor 1FT6105-1AC71, serijska številka: EHN64333401017, rabljen, dobro ohranjen, 100% funkcionalen, dobava po slikah. Rcjdpfx Aqezg Sa Tstef

Stanje: pripravljen za uporabo (rabljen), Stator Siemens za servomotor 1FT6105-1AC71 Serijska številka: EH782281001023, rabljen, dobro ohranjen, 100 % delujoč, dobava kot na slikah. Rsdpfxjzg Sa Ho Aqtscf

Leto izdelave: 2024, stanje: novo, We sell chip brushes suitable for common machine types made by Behringer and Kasto sawing machines. Minimum order quantity is 20 pieces. We are happy to respond to your inquiries. Rsdetp T N Uepfx Aqtecf

Leto izdelave: 2024, stanje: novo, We sell chip brushes suitable for common machine types made by Behringer and Kasto sawing machines. Minimum order quantity is 20 pieces. We are happy to respond to your inquiries. Rcsdpfoww Dgiex Aqtjf

Leto izdelave: 2024, stanje: novo, We sell chip brushes suitable for common machine types made by Behringer and Kasto sawing machines. Minimum order quantity is 20 pieces. We are happy to respond to your inquiries. Rcodpfx Aqjv Uau Sjtjf

Stanje: novo, SCHUNK DPG 100 paralelni prijemalec SN: 370253 + dodatki DPG 100/1 in DPG 100/1 S, neuporabljen v odprti originalni embalaži, 100 % delujoč, obseg dobave po fotografijah Rodezd I Eyepfx Aqtscf

Stanje: pripravljen za uporabo (rabljen), Siemens stator za servomotor 1FK6083-6AF71 Serijska številka: YFM210681703002, rabljen, dobro ohranjen, 100 % delujoč, dobava po slikah. Rsdpfezdxkyjx Aqtscf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Rodpfx Aqji Ri Hretecf Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: pripravljen za uporabo (rabljen), Fanuc Pulsecoder A20B-2003-0311 za AC servomotor, serijska številka: 102745, rabljen, dobro ohranjen, popolnoma delujoč, obseg dobave po slikah. Rcedpfx Aqsx H Huzstof

Stanje: novo, Screw spindle pump FFS 348 SN:22209 for EMAG machine, manufacturer unknown, unused, 100% functional, scope of delivery as per photos Rcodpfx Aqjulqkujtsf

Stanje: pripravljen za uporabo (rabljen), Allen-Bradley 22-COMM-E SN: 4024A5A5 module with Rockwell Automation 194706-Q06 / AMP0621 cable for PowerFlex 40 – with cover, used, in good condition, 100% functional, scope of delivery as per photos. Rcedpopf An Refx Aqtsf

Stanje: pripravljen za uporabo (rabljen), Heidenhain Id. 324 952-01 vmesniška plošča SN: 7271755, preverjena, testirana, 100% delujoča, z 3-mesečno garancijo, dobava po fotografijah. Rcedpfx Aey Nqf Ajqtef

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5064-0AF01-Z permanent magnet motor, SN 5G85 9952 07 002, used, with normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Rjdpfxek Uy U Ej Aqtecf

Stanje: pripravljen za uporabo (rabljen), Fanuc rotor za A06B-1401-B105 AC servomotor, SN: 103253, rabljen, dobro ohranjen, 100 % delujoč, dobava v skladu s fotografijami. Rodpfx Aqszahuhotjcf

Stanje: pripravljen za uporabo (rabljen), Siemensov stator za motor 1FK7042-5AF71, serijska številka: YFW148399803009, rabljen, dobro ohranjen, 100 % funkcionalen, dobava v skladu s fotografijami. Redpfxozahwvo Aqtecf

Stanje: pripravljen za uporabo (rabljen), Rotor Fanuc za servomotor A06B-1401-B105 SN: 102703, rabljen, dobro ohranjen, 100% funkcionalen, dobava kot na slikah. Rsdpfox Dt T Njx Aqtecf

Stanje: pripravljen za uporabo (rabljen), Rotor Fanuc za servomotor A06B-1401-B105, serijska številka: 102710, rabljen, dobro ohranjen, 100% delujoč, dobava po fotografijah. Rcjdpfx Ajx Dt Uaoqtjf

Stanje: pripravljen za uporabo (rabljen), Stator Fanuc za AC vretenski motor A06B-1401-B105, serijska številka: C20ZS0620, rabljen, v dobrem stanju, 100% delujoč, dobava kot na slikah. Rcsdsx Dt Ugepfx Aqtsf