Zaščita Stebra Pred Trkom nakup rabljenega (6.344)

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Bodpfxszd Rzwo Altslk Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: novo, Leto izdelave: 2009, 3 kosi prenapetostnih odvodnikov zelo visoke napetosti, proizvajalec ABB, tip PEXLIM-Q096-XH123H - originalno zapakirani, nikoli uporabljeni, vključno s števci izpustov, leto izdelave 2009 Bledpfx Aley Ipycetsk

Stanje: novo, Leto izdelave: 2025, Ein kompakter Faserlaser-Blechschneidmaschine mit vollumfänglichem Schutz Das platzsparende Design vereint umfassenden Schutz mit erhöhter Sicherheit. Jeder Rahmen des Schneidmaschinenbetts ist nach der Nut-und-Feder-Verbindung verschweißt, um optimale mechanische Eigenschaften sowie erhöhte Stabilität und Festigkeit zu gewährleisten. Der ausziehbare Schneidtisch – optional elektrisch – spart Stellfläche und verbessert das Benutzererlebnis. Bequemes und schnelles Öffnen und Schließen per Tastendruck: Die Laserschutztür überzeugt durch sicheren und zuverlässigen Betrieb dank Zahnstangenantriebssystem mit selbstverriegelnder Schneidmaschinenmechanik. Die Laserköpfe erkennen hervorstehende Hindernisse und reduzieren dadurch effektiv die Schadensrate und langfristige Wartungskosten. Bodpohwrg Eefx Altolk Geeignetes Material: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W, 12000W Arbeitsbereich: 1000*1500mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlungsart: Wasserkühlung

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used rack impact guard for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Impact guard rail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pcs Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions must be observed Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all rack systems Bljdpfx Asdz Uxqoltek Delivery with our own fleet (unloading not included)

Stanje: kot nova (razstavni stroj), We are offering a second-choice column protector from manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Column protector, second choice Material colour: yellow Design: V shape Total height: approx. 750 mm Total width: approx. 124 mm Inner width: approx. 116 mm Total depth: approx. 65 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Pitch/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 9 mm Bodpfehr U Trjx Altjlk 06x Hexagon bolts: M8 x 35 mm 06x Lock nuts: M8 06x Washers: M8 General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be quoted separately depending on the delivery location and scope.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-shaped impact protection, used Material color: yellow Total height: approx. 400 mm Outer profile dimensions: U: approx. 100 x 50 mm Outer profile dimensions: U: approx. 80 x 40 mm Material thickness: approx. 6.00 mm Base plate dimensions: approx. 200 x 100 mm Borehole diameter: approx. 12 mm Number of boreholes: 04 units Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Blsdpfx Ajn R Edmoltok This item is offered for collection only. Delivery or dispatch of this item is subject to additional costs, which can be determined individually depending on the delivery location and scope. Please contact us for a specific quote.

Stanje: dober (rabljeno), Included in delivery: 01x Upright protector, used Material color: yellow Total height: approx. 970 mm Total width: approx. 140 mm Internal width (incl. foam): approx. 93 mm Internal width (without foam): approx. 134 mm Total depth: approx. 60 mm Material thickness: approx. 3.00 mm Hole diameter: approx. 11 mm Hole pattern (HxW): approx. 700 x 50 mm Unit weight: approx. 5.87 kg Blodpfxjikvktj Altok - Supplied without mounting material

Stanje: dober (rabljeno), Included in the scope of delivery: Blsdov Uk Rwopfx Altek 01x Upright protector: used Manufacturer: Stow Type: Pal Rack NS Material color: yellow Total height: 340 mm Suitable for frame profile: 85 mm Leg dimensions: 65 x 65 mm Material thickness: 3.00 mm Deflector height: 50 mm Bore hole diameter: 11 mm Bore hole spacing: 200 mm Number of bore holes: 04 pcs. Including mounting material consisting of: 04x Hexagon bolt M10x35 mm 04x Hexagon nut M10 08x Washer M10 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be specifically requested from us depending on the place of delivery or scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-shaped impact protection corner, used Manufacturer: SLP Material colour: yellow/black Total height: 405 mm Total width: 230 mm Total depth: 260 mm Opening (internal dimension): 160 mm Internal width: 222 mm Internal depth: 168 mm Number of mounting holes: 04 pcs. Mounting hole diameter: approx. 13 mm Material thickness: 4 mm Weight per piece: 7.77 kg Your contacts in our company: Bodpfx Alovtbfvetolk Mr Andre Evering Mr Mario Klöver Mr Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will be incurred, which can be enquired with us separately depending on place of delivery and scope of delivery.

Stanje: kot nova (razstavni stroj), The scope of delivery includes: 01x Upright protector, second choice Material color: yellow Total height: approx. 1,000 mm Total width: approx. 128 mm Internal width: approx. 120 mm Material thickness: approx. 4.00 mm Weight: approx. 5.23 kg | each Bsdpfelikw Hsx Altelk Per side: 2 mounting holes, Ø approx. 11 mm Distance center-to-center of holes: approx. 900 mm

Stanje: dober (rabljeno), Technical specifications: Manufacturer: Tegometall Model: Cl Suitable for frame profile: CI 100x80 Blodpfoibvknjx Altok Scope of delivery includes: 01x U-shaped upright protector, used Material colour: orange Overall height: approx. 730 mm Overall width: approx. 130 mm Internal width: approx. 120 mm Depth: approx. 60 mm Material thickness: approx. 5 mm 02x Locking pins, used Design: fully galvanised For securing the upright protector against unintentional lifting out

Stanje: dober (rabljeno), Scope of delivery includes: 01x Impact Protection Guardrail, second choice Material color: yellow / black / galvanized Overall height: approx. 400 mm Overall depth: approx. 180 mm Clear span: approx. 2,000 mm Consisting of: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile dimensions: CS: approx. 300 x 80 x 25 x 15 mm Material thickness: approx. 2 mm Length: approx. 2,000 mm 02x L-shaped impact protection corners, new Material color: yellow / black According to DIN standard Overall height: approx. 400 mm Leg length: approx. 170 x 170 mm Material thickness: approx. 5 mm Weight per piece: 6.10 kg 08x bolts: M12 08x nuts: M12 16x washers: M12 The impact protection guardrail is delivered fully pre-assembled. Note: Other lengths available upon request. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Bjdpfxotq Ebde Altjlk Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or shipment of this item is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Stanje: dober (rabljeno), Included in delivery: 01x U-shaped collision protection corner, used Material color: yellow Total height: approx. 400 mm Profile dimensions external: U: approx. 50 x 50 mm Blsdpfjn R Egzjx Altsk Profile dimensions external: U: approx. 40 x 40 mm Material thickness: approx. 5.00 mm Base plate dimensions: approx. 300 x 100 mm Drill hole diameter: approx. 12 mm Number of drill holes: 06 pcs. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond that is subject to additional costs, which can be requested from us separately depending on the place of delivery or delivery scope.

Stanje: dober (rabljeno), Included in delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 350 mm Total width: approx. 200 mm Bedpfsk T Au Eox Altjlk Internal width: approx. 160 mm Total depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimensions: approx. 140 x 140 mm Base plate dimensions: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore diameter: approx. 16 mm Number of bore holes: 04 pcs. Weight / unit: approx. 14.850 kg General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be provided upon request depending on the delivery location and scope.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Post protector, used Material colour: yellow Design: V-shape Overall height: approx. 750 mm Overall width: approx. 100 mm Bodeh Ei Udspfx Altjlk Internal width: approx. 93 mm Overall depth: approx. 60 mm Material thickness: approx. 3.50 mm Grid / hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 11 mm 06x Hexagon bolt: M8 x 35 mm 06x Lock nut: M8 06x Washer: M8 General information about the item: This item is offered for collection only. Delivery or shipment beyond this is subject to additional costs, which can be requested from us separately depending on the delivery location and scope of delivery. Our range of services at a glance: (Prices upon request) Assembly, installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234. Visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), We offer here a second-choice column protector from the manufacturer SSI Schäfer for sale. The delivery includes: 01x Column protector, second choice Material colour: yellow Design: V shape Total height: approx. 400 mm Total width: approx. 112 mm Internal width: approx. 104 mm Total depth: approx. 60 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Pitch/hole spacing: approx. 250 mm Number of holes: 4 pcs. (2 pcs. per side) Hole diameter: approx. 9 mm 04x Hexagon head bolt: M8 x 35 mm 04x Locking nut: M8 04x Washer: M8 General information about the item: Bedpfxohr U S Uj Altolk This item is offered for collection only. If you require delivery or shipping of this item, additional costs will apply. These costs can be requested from us separately depending on delivery location and scope of delivery.

Stanje: novo, Leto izdelave: 2025, Kompaktno zasnovan laserski rezalni stroj za pločevino z vlakenskimi laserji s popolno zaščito Stroj zasede malo prostora, vendar ponuja popolno zaščito in višjo stopnjo varnosti. Vsak okvir postelje rezalnega stroja je zvarjen po moznično-utornem spoju, kar zagotavlja vrhunske mehanske lastnosti ter večjo stabilnost in robustnost. Izvlečna miza rezalnika, z možnostjo električnega pogona, dodatno zmanjšuje zasedenost prostora in izboljšuje uporabniško izkušnjo. Bledpjhwrf Ssfx Altjk Hitro in enostavno odpiranje/zapiranje z enim klikom; vrata laserskega rezalnika so varna in zanesljiva zaradi zobniško-letvičnega pogona v kombinaciji s samozapiralnim sistemom stroja. Laserske glave z vlakni lahko zaznajo izstopajoče ovire in tako učinkovito zmanjšajo stopnjo poškodb ter znižujejo stroške vzdrževanja. Primerni materiali: kovina Stanje: novo Vrsta laserja: vlakenski laser Moč laserja: 1500 W, 2000 W, 3000 W, 6000 W, 12000 W Delovno območje: 3048 × 1524 mm Hitrost rezanja: 0–100 m/min Natančnost pozicioniranja: ±0,05 mm Ponavljalna natančnost: ±0,03 mm Podprti grafični formati: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC nadzor: da Način hlajenja: vodno hlajenje

Stanje: novo, Leto izdelave: 2025, Kompaktno zasnovan laserski rezalnik pločevine z zaščitnim ohišjem Kompaktna namestitev stroja omogoča popolno zaščito in visoko varnost pri delu. Vsak okvir ležišča rezalnika je zvarjen po principu spojke utor-pero, kar zagotavlja optimalne mehanske lastnosti ter izboljšano stabilnost in trdnost. Izvlečna delovna miza (po želji z električnim pogonom) omogoča prihranek pri prostoru in izboljšano uporabniško izkušnjo. Priročno in hitro odpiranje ter zapiranje z enim klikom; vrata rezalnika z lasersko zaščito so varna in zanesljiva, saj uporabljajo pogon z zobnikom in letev ter samozaščitno (samozaklepno) rezalno napravo. Laserske glave z vlaknom zaznajo izbočene ovire, kar bistveno zmanjša možnost poškodb in stroške vzdrževanja rezalnika. Uporabni material: kovina Stanje: novo Tip laserja: vlaknasti laser (fiber laser) Moč laserja: 1500W, 2000W, 3000W, 6000W, 12000W Delovna površina: 1000 x 1500 mm Hitrost rezanja: 0–100 m/min Natančnost pozicioniranja: ±0,05 mm Ponovljivost pozicioniranja: ±0,03 mm Podprte grafične oblike: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC: da Bodpfx Aohwrgaeltolk Način hlajenja: vodno hlajenje

Stanje: novo, Fully automated system Energy saving Industry 4.0 Bedjg Adn Ijpfx Altolk Durma Cloud Fiber laser technology Environmental awareness Synchronous minimal working area High-precision repeatability High process accuracy Compact layout Low noise emission Simple and quick installation We will send you information material upon request.

Stanje: skoraj kot novo (rabljeno), DELFIN INDUSTRIAL VACUUM CLEANER INDUSTRIAL VACUUM 400V EXCELLENT CONDITION SCOPE OF DELIVERY = AS PICTURED (approx. 1/4 - 1/5 of new price – TOP OFFER) 4 units available Delfin ESD.DX.0036 Industrial Vacuum Cleaner – Excellent Condition, Ideal for Industrial Applications Bledpfx Alowd D R Uotjk Manufacturer: Delfin Model: ESD.DX.0036 Condition: Very good, minimal signs of use Functionality: 100% fully functional Features: ✅ ESD Protection: Specially designed for use in electrostatically sensitive environments – ideal for cleaning electronic components and sensitive equipment. ✅ High Suction Performance: Efficient cleaning with a powerful motor and excellent suction capacity. ✅ Robust and Durable: The Delfin ESD.DX.0036 is built for continuous operation in industrial plants and workshops. ✅ Versatile: Ideal for dust extraction, cleaning machines, production areas, and construction sites. ✅ Easy to Operate: Simple handling with ergonomic grips and a user-friendly control panel. ✅ Low Energy Consumption: Despite its high performance, this vacuum is energy-efficient and environmentally friendly. Technical Details: Easy Maintenance: The Delfin ESD.DX.0036 is easy to maintain, with spare parts readily available. Robust Construction: Optimized for industrial environments, made with highly durable materials that withstand even extreme conditions. Industrial operations Cleaning of laboratories and production facilities ⚡ Use in ESD-protected areas ️ Workshops, machinery cleaning Cleaning of electronics and sensitive equipment Why this vacuum? The Delfin ESD.DX.0036 is the ideal choice for companies looking for a reliable, high-performance, and energy-efficient industrial vacuum cleaner. Featuring ESD protection and high suction power.

Stanje: kot nova (razstavni stroj), Semiconductor protection Brand: Klöckner Moeller Type: DIL SM 16 V-k 400 Volt 16 A Bodpfx Aomxi U Seltjlk 7.5 kW Unused from stock

Stanje: novo, Bumper, corner guard, rack leg protector for warehouse shelving. The Mega-M warehouse rack leg bumper is made of steel, powder-coated in yellow. It features 4 holes for permanent floor installation and side holes for bolting cross beams or horizontal rails. The bumper increases safety for forklift operations within the warehouse, reducing the risk of costly rack repairs. - Manufactured from steel, powder-coated in yellow. - Universal and easy to install. - Mounted to the front of the rack upright. - Allows for mounting horizontal beams. - Used in industrial environments to protect racks from mechanical damage. - Enhances safety and lowers warehouse maintenance costs. Bjdpfxjm Sg Dhj Altslk This listing is for a rack leg bumper: Item code: MTP001334 • Height: 400 mm • Width: 170 mm • Length: 300 mm • Steel thickness: 4 mm • Mounting hole diameter: 15 mm • Colour: yellow RAL1023 • Quantity per pallet: 108 pcs Net price: 11 EUR per unit. We offer a wide range of racking components, both new and used: uprights, beams, and shelf infills such as cross beams, WEMA grids, wire shelves, and chipboard panels. The listed prices apply to wholesale exports outside of Poland. Please contact us for details. For wholesale and retail prices within Poland, please contact us. * The above price applies with a minimum order of one pallet. * EU-wide delivery available. * The offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: kot nova (razstavni stroj), Protective cable conduits, made of fiberglass, available in 4 diameters and 6 m lengths. Bjdjb Nxc Tjpfx Altelk The conduits were developed and manufactured in 1995 for a new water pipe system, which unfortunately could not establish itself on the market. Available dimensions: Outer diameter: 16, 20, 25, and 32 mm.

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 978 h, vrsta goriva: električni, Haulotte Star 10 Električni dvižni stolp / Vertikalno dvižno vozilo, delovna višina 10M, leto 2011 Video je možno poslati preko WhatsAppa. Stalna zaloga, preverite spletno stran. Bledpfx Aljy Uvz Tetek Cene so iz Nulanda. Van de Wert Trading B.V. ima različno zalogo strojev, tovornjakov, prikolic in priključkov. Vse naše dobave so po trgovinskih cenah, v stanju 'AS-IS' brez garancije. (glejte naše splošne pogoje) Za ogled in/ali testno vožnjo lahko brez obveznosti rezervirate termin. Pokličite prej, saj nismo stalno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Leto izdelave: 2023, obratovalne ure: 10 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Here we offer a machine specifically developed for the securing of loose or cracked knots. Bljdspiufwjpfx Altjk Knots are automatically detected during continuous feed operation and fixed with hot-melt adhesive. This significantly reduces the reject rate caused by defective knots. On opaque lacquered surfaces, the knots become virtually invisible. Net Automation sets new technological standards in the diagnosis and correction of wood defects with the AELA XKI: • Greatly reduced processing times • Immediate further processing possible • Enhanced visual appearance • Extremely user-friendly operation DIAGNOSIS AND CORRECTION: • Rotten knots • Cracked knots • Resin pockets • Encased (wing) knots, etc. ..... BENEFITS: • No tear-outs during planing • Detection of dirt and batten imprints • Diagnosis with artificial intelligence (AI) • Automated fixing process The unit can be viewed and tested at our premises in 77866 Rheinau by prior arrangement.