Wood-Mizer Lt70 nakup rabljenega (6.663)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, XYLOG 800 – Profesionalni avtomatski žagalno-cepilni stroj za industrijsko proizvodnjo drv Rabaud XYLOG 800 je zmogljiva rešitev za vse, ki želijo učinkovito in ekonomično proizvajati velike količine kakovostnih drv. Kot stacionarni žagalno-cepilni avtomat obdeluje hlode do premera 800 mm z impresivno hitrostjo in natančnostjo – idealno za gozdarska podjetja, trgovce z lesom in profesionalne proizvajalce drv. Vaše prednosti na enem mestu: • Največja kapaciteta: Do 800 mm premera hlodov – popoln za debele trde vrste lesa, kot so hrast, bukev ali jesen. • Prilagodljiv sistem rezanja: Izbirno s SUPERCUT verižnim mečem (113 cm, samodejna napetost in mazanje). • Nastavljiva dolžina cepancev: Od 25 do 50 cm – hidravlično nastavljivo z avtomatskim povratkom za maksimalno učinkovitost. • Zmogljiva cepilna enota: 16 ton cepilne sile z ISO POWER (samodejna in brezstopenjska nastavitev hitrosti) ter dvema neodvisnima cepilnima nožema. • Varno in natančno podajanje: 3 neodvisne sponke za hlode, verižna podajalna miza (do 8 m uporabne dolžine) in V-oblikovani transportni trakovi za varen transport tudi ukrivljenih ali kratkih hlodov. • Visoka produktivnost: Žaganje od spodaj navzgor – prihranek časa pri manjših premerih in minimalen delež drobnega lesa. XYLOG 800 združuje žaganje in cepljenje v robustnem, nizko vzdrževalnem sistemu. Zasnovan je posebej za neprekinjeno industrijsko uporabo, navdušuje z dolgo življenjsko dobo, nizkimi obratovalnimi stroški in vrhunsko kakovostjo cepancev. Odličen za: • Profesionalno proizvodnjo drv • Gozdarska podjetja z velikimi količinami • Predelovalce lesa, ki cenijo enakomerno in prodajno pripravljeno drvo Nedpjzgwfhofx Afmocu Močno povečajte svojo produktivnost – z Rabaud XYLOG 800 boste proizvedli več drv v krajšem času, z manj truda in boljšo kakovostjo. Povprašajte za neobvezujočo ponudbo ali predstavitev! XYLOG 800 – Moč za kakovostne kose lesa.

Stanje: novo, Volumni: na voljo v izvedbah z 10 m³ ali 20 m³ Ncodow Hfzajpfx Afmeu Opis izdelka: Easyplan je kompakten, a zmogljiv sistem za sušenje, zasnovan za sušenje mehkega in trdega lesa ter za toplotno obdelavo palet in lesenih embalaž po standardu ISPM‑15. Zagotavlja popolno fitosanitarno skladnost ter dosledno kakovostne rezultate sušenja za različne vrste lesa. Namestitev je mogoča v manj kot enem dnevu, zaradi česar je idealen za hitro uporabo v malih in srednje velikih proizvodnih obratih. Proces je popolnoma avtomatski — peč enostavno naložite, nato pa sistem sam upravlja ves cikel sušenja ali toplotne obdelave. Možnosti ogrevanja: - Električni: 27 in 36 kW - Plinski gorilnik: 200 kW - Topla voda / para Velikost sklada lesa EASYPLAN 10 in EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL palet Ključne prednosti: - Kapacitete 10 m³ ali 20 m³ za različne potrebe proizvodnje - Primerno za mehki in trdi les - Toplotna obdelava palet in embalaže skladno s standardom ISPM‑15, sušenje drv - Popolnoma avtomatski proces sušenja - Hitra namestitev v manj kot 24 urah - Prilagodljive možnosti ogrevanja glede na razpoložljive vire energije

Leto izdelave: 1991, stanje: rabljeno, Rabljeni stroj Leto izdelave: 1991 S 4 brusilnimi agregati Dimenzije obdelovanca: Debelina min. 10 mm, maks. 150 mm Širina min. 10 mm, maks. 180 mm Dolžina min. 190 mm, maks. neomejeno Dimenzije brusnega traku: 200 x 1800 mm Priključki za odsesavanje: Nsdpfx Aow Tfxdsfmocu 2 odsesovalna priključka 80 mm 4 odsesovalni priključki 120 mm Potreben pretok zraka: 30 m/sec. Mere (d x š x v): 3400 x 1150 x 1805 mm Teža: 2400 kg Razpoložljivost: takoj Skladišče: Odenwald

Leto izdelave: 2025, stanje: novo, Exhibition machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Made of 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame, with adjustable machine feet. Milling bed made of 19mm MDF sacrifice board. Table openings pre-configured longitudinally and transversely. Mechanical set consisting of profile guides incl. profile guide carriages, ball screw, and precision rack. All components assembled, pre-lubricated incl. test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, fully pre-installed in control cabinet, as well as sensors for each axis. Switching relays for automatic activation of the existing extraction system. Brush seals as dust protection and CE-conform safety devices by a traveling extraction unit and a laser scanner mounted on one side for workspace monitoring, with a 275° and 5.5m field range (machine positioned in a room corner). Handheld control unit equipped with all necessary functions for machine operation, incl. emergency stop button and dead man's switch. Tool length sensor for determination of tool length and automatic active offset adjustment. High-frequency spindle, 2.2 kW, incl. locking nut, frequency inverter, line filter, braking resistor, and a collet set. Monitor as built-in display, incl. mini PC with Windows 11, Beamicon2 control software, as well as mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Ncjdpfjxc Rmqsx Afmsu Incl. milling bed designed as a vacuum table, consisting of four individually controlled sections. Cross-table made of PE with a cover plate made of MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. For connecting the vacuum pump to the power supply, a 16 amp, 400 V AC plug is required. The customer must provide 3mm raw HDF on both sides for the entire vacuum table (2500x1300mm) as a sacrificial plate. (Recommended use: machining coated wood-based materials) Incl. 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5 mm Z3 (HF53SRECAR) (Tool selection can be adjusted as required) Incl. maintenance package in a systainer Incl. grease gun 150 ml, one cartridge high-performance grease 400 g, silicone spray grease 500 ml, one grease fitting incl. hose section, and 30mm face mill with indexable inserts. Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 7405_408, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a meticulously maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. The machine is in excellent technical and visual condition and can be demonstrated under power. Of particular note are the exceptionally low operating hours, with only 788 hours of active feed. The machine underwent professional maintenance and a complete realignment by the manufacturer in 2021. Since then, it has seen only minimal use and operates smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Machine Number: 7405_408 Software / Control CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active Feed / Processing Hours: only 788 h Machine ON: 6,723 h Equipment 4-MAT version Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal machining Nedey Sicxepfx Afmscu Vacuum clamping system Ideally suited for: Cabinetmaking Interior fitting Kitchen manufacturing Joineries CNC entry-level or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally realigned by the manufacturer in 2021 Only limited use since Immediately ready for operation Runs very cleanly and precisely No known technical faults Machine can be inspected and tested during operation. Availability Available from calendar week 25 / 2026. Viewing by appointment possible. Assistance with loading and transport organization available. Price Negotiable: €43,900 net

Stanje: novo, XPLAN je rezultat skoraj 50 let izkušenj podjetja Incoplan pri zagotavljanju izjemno učinkovitih in energijsko varčnih načinov sušenja lesa, po vsem svetu in v vseh klimatskih razmerah. V primerjavi s konvencionalnim sistemom izmenjave zraka kondenzacijsko sušenje z XPLAN zahteva približno 60 % manj električne energije. To je nežen način sušenja, ki je še posebej primeren za trde in mehke vrste lesa ter omogoča ohranjanje njihovih lastnosti. XPLAN je na voljo v treh različicah: LITE do 10 m3 STANDARD z dodatnimi ventilatorji za tunelske strukture PRO do 20 m3 lesa. Zgradite ali kupite svojo konstrukcijo, postavite in priključite XPLAN ter začnite s sušenjem. Pripravljamo celoviti načrt za idealno komoro, priporočila za materiale in vse potrebne informacije. Na slikah so prikazane tri različice ter predlogi za doma narejeno komoro in stene. Električna omarica je vedno vključena in tovarniško povezana s strojem. Programska oprema je samodejna, s zaslonom na dotik in vsebuje več prednastavljenih sušilnih programov. TEHNIČNE SPECIFIKACIJE KOMPRESOR – NAZIVNA MOČ HP 1,5 kW TRANSPORTNA TEŽA 154 kg POMOŽNO GRETJE 4 kW MOTORJI NOTRANJIH VENTILATORJEV 0,25 kW; pretok zraka 3.060 m³/h MOŽNOST TOPLOTNE OBDELAVE Da, do 71° C (samo z dodatnim grelcem) CIRKULACIJSKI VENTILATORJI 2 priložena: 400 mm, 0,25 kW, vsak s pretokom 3.060 m³/h PRIKLJUČNA MOČ 5,8 kW (28A) – 400 V 50 Hz (1-fazno) DIMENZIJE (V x D x Š) 94 × 83 × 52 cm (samo osnovna enota) Sistem zračenja z 1 ventilatorjem je vključen (izpuh in dovod) ČAS SUŠENJA 25 mm zelen bor: od 80 % do 8 % v približno 12 dneh. 25 mm zelen hrast: od 65 % do 8 % v približno 35 dneh. NASTOPNA ZMOGLJIVOST Za mehki les in hitro sušeči se trdi les (bor ali topol): 3–5 m3 Za počasi sušeči se trdi les (hrast): 10 m3 NAZIVNA HITROST ODSTRANJEVANJA VODE Ncsdpfx Afjw Ug Atomsu 114 kg na 24 ur – 5 l/h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 1000028110, Funkcionalnost: popolnoma funkcionalen, moč: 12 kW (16,32 KM), potovalna razdalja osi X: 2.600 mm, pomik osi Y: 900 mm, pomik po osi Z: 60 mm, dolžina obdelovanca (maks.): 2.600 mm, širina obdelovanca (maks.): 900 mm, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj vrhunski vertikalni CNC obdelovalni center. Stroj je bil kupljen nov, smo prvi in edini lastniki, kar zagotavlja jasno zgodovino vzdrževanja in uporabe. Stroj je v popolnoma delujočem stanju, izjemno ohranjen, brez dodatnih vlaganj. Ncsdpjy Sfw Eofx Afmsu - Delovno območje x/y/z: 2600-900-60mm - Delovna glava z BH17 vrtalno glavo (10 horizontalnih in 6 vertikalnih svedrov) - Hitrost do 65 m/min - Krmiljenje BSolid - Avtomatsko lasersko branje dimenzij

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, avtomatski žagalni stroj za masivni les, model OMEC TA 185 Ncodjzfggfepfx Afmju rabljen stroj Funkcionalno stanje: odlično CE označba: DA Navodila za uporabo: DA rezalni načrt glej prilogo z valjčnimi tirnicami (kot na sliki) 1 kos stoper z žaginim premerom 550 mm moč motorja 10 KM napetost 380/50

Stanje: rabljeno, Leto izdelave: 1975, Formatna žaga za les KAMRO tip FK Maksimalno število obratov: 4000 RPM Njdpozg Id Iefx Afmscu Leto izdelave: 1975 Dimenzije žaginega lista: Ø 400 x 3,5 x 30 mm (list ni priložen stroju) Dolžina vodila zadnjega naslona: 1500 mm Napetost: 380 V Dolžina: 2600 mm Globina: 2000 mm Teža: 800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Vertikalna tračna žaga za les PROMAC SW-430 Globina grla: 400 mm Nsdpfx Aozg Iduefmscu Dimenzije mize: globina 600 mm x širina 430 mm Nagibna miza od 0 do 40° Dimenzije listov: dolžina 3330 x 15 mm x debelina 0,6 mm Maksimalna višina reza: 200 mm Premer pogonskih koles: Ø 430 mm Napetost: 380 V Motor: 1,5 kW Širina: 800 mm Globina: 900 mm Višina: 1900 mm Teža: pribl. 150 kg Leto izdelave: 2011 (stroj v zelo dobrem stanju) Priloženi sta 2 rezervni žagini listi

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 4 h, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), skupna masa: 1.200 kg, skupna dolžina: 1.750 mm, skupna širina: 1.200 mm, skupna višina: 1.640 mm, delovna širina: 630 mm, vhodna napetost: 400 V, višina krmilne omare: 200 mm, dolžina elektro omare: 600 mm, širina krmilne omare: 600 mm, število rezil: 15, največja hitrost vrtenja: 100 obr/min, premer rotorja: 260 mm, širina rotorja: 630 mm, perforacija sita: 15 mm, vrsta vhodnega toka: Klimatska naprava, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, Drobnilec odpadnih materialov, sekač, drobilec lesa, rezalnik, shredder MHR630 ecoline Serija MHR ecoline so robustni in energetsko učinkoviti stroji za drobljenje lesa, ki so zasnovani za zanesljivo neprekinjeno uporabo v komercialnem okolju. Priključni drobilniki prepričajo z visoko zmogljivostjo, nizko porabo energije in odličnim razmerjem med ceno in zmogljivostjo. Zato so drobilniki idealni za obrtnike, reciklažna podjetja in lesno-predelovalne obrate, ki iščejo gospodarno in hkrati zmogljivo rešitev. Stroji se proizvajajo v naši tovarni v Nemčiji in se prodajajo neposredno. Prednosti Ncodpfjzgiv Sjx Afmju - Neprekinjen, enakomeren postopek drobljenja - Visoka zmogljivost ob nizki porabi energije - Robustna konstrukcija - Večja vstopna odprtina - Odlično razmerje med ceno in zmogljivostjo - Priključni (5-polni CEE vtič, 400V, 32A trifazni tok) - Siemens PLC krmiljenje - MHR630 ecoline Rößler drobnilec odpadnih materialov »Manufactured in Germany«

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: AA1/11510, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 19.250 h, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 3.080 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 280 mm, dolžina obdelovanca (maks.): 3.080 mm, širina obdelovanca (maks.): 1.200 mm, število osi: 3, število mest v zalogovniku orodij: 12, skupna višina: 2.346 mm, skupna masa: 4.000 kg, Oprema: CE označba, dokumentacija / priročnik, Ponujamo rabljeni obdelovalni center SCM Record 130, letnik 2000. Močnejša vakuumska črpalka 2050 m3/h. Rotacijska os Vector. Kotni menjalnik nastavljiv od 0 do 100 stopinj, HSK63. Vrtalna enota z 9 vreteni. Malo obratovalnih ur. Nedpfx Aoyzadrofmjcu Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Žaga za masivni les MZ PROJECT LC 4000 avtomatski stroj rabljeni stroj CE oznaka: Da Krajenje desk z motoriziranim zadnjim valjčnim transporterjem z avtomatsko funkcijo zaustavitve in fiksnim sprednjim valjčnim transporterjem Vzdolžni rez masivnih desk in plošč do 4000 mm. Globina reza 1500 mm Ncjdozdqxcjpfx Afmou z avtomatskim podajanjem (CN). Največja širina reza 1500 mm Stanje: Odlično Največja dolžina reza: 4000 mm Moč motorja: 15 KM Skupna teža: 3000 kg Napetost: 380/50 V

Stanje: dober (rabljeno), Leto izdelave: 1993, Rotor width 800 mm 22 kW motor Ncodpfxop H Sv Ds Afmeu 20 knives on rotor, 25 mm concave A wooden frame is also included to raise the chipper, allowing a conveyor belt to fit underneath.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Permanent Overband Magnetic Separator Type: PEM1200 1200 x 550 x 200 mm ===== 4x Lifting ring bolts for suspension Drive pulley + return pulley made from welded and machined S235 steel Ø150x300 mm crown-turned, shaft fixed with pillow block bearings. Two-bolt flange bearings UCFL with grease nipple, sealed bearing housing Drive: Plug-on gear motor GEMOTEG 0.37 kW, speed 0.4 m/sec Connection: 400 V, 50 Hz, protection class IP54 Nedpfx Afjd Dy S Romscu Drive ready for connection up to motor terminal box (Commissioning must be performed by a qualified electrician) Endless PU conveyor belt GB30, black matte 7 x cleats T20, high-frequency welded High-quality triple aluminum construction 2 pcs. side guards made of V4A stainless steel Magnet dimensions: 700 x 230 x 120 mm Magnet core encapsulated in soft iron to guarantee very high permeability. Bottom sealed tightly with stainless steel plate and pole shoes.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm Ncsdjyhzhnopfx Afmsu - including cutout in the discharge plate - including slide bushings in the drive and return rollers

Stanje: novo, Leto izdelave: 2026, Aluminum angle conveyor with support frame including adjustable feet and machine leveling feet for compensating uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length (measured on the floor): 5,000 mm Discharge height: 2,000 mm Horizontal height: 500 mm Design features: Aluminum modular construction - Reinforced triple profile 135x45 mm - Fully covered 2.0 mm galvanized steel discharge plate Drive roller + return roller made of S235 steel, welded and machined Ø150x820 mm crowned, shaft fixed with pillow block bearings. Drive: Direct-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be carried out by a qualified electrician) Ncedpjyhzhuofx Afmeu PVC conveyor belt DM 15/4 0+007 PVC incl. wave-edge PVC, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, with high transverse stability In the bend, the belt is guided on each side by 3 hold-down rollers. Belt has a 70 mm edge-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover customized solutions for your industry! As an innovative mechanical engineering company, we take pride in offering tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveyor systems, flat belt conveyors, incline conveyors, and angle conveyors to Z-shaped conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnets, drum magnets, and dosing bunkers—all designed according to our customers’ specific requirements. We understand that every industry and project is unique. That is why we customize our solutions to your specific wishes and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special orders—for every problem we find the right solution! Put us to the test! Contact us and discover how we can turn your requirements into tailored solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grates, magnetic grids, metal separators, block magnets, filtration systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Aluminum angled conveyor belt with substructure including leveling and adjustable machine feet for compensating uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Knee angle: 45° Height of the horizontal section: 350 mm Total conveyor length (measured on the floor): 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Reinforced double profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller made of welded and machined S235 steel Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) Nedpjyhzhzefx Afmjcu PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matt Belt width: 600 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, highly cross-stable At the angled section, the belt is guided on both sides with three hold-down rollers each Belt is supplied with a 70 mm edge-free zone on both sides Due to the wave edges on both sides, the usable belt width is reduced Usable width: 300 mm, calculated as follows: (Top view) Cross configuration 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC V-guide rib on the running surface profile – 10x6 mm - Including widened substructure for head load stability - Including cut-out in the discharge plate - Including slide bearings in the drive and return roller - Including magnet-free zone for overband magnetic separator area - Including bracket for DMPM1200 in the incline section Discover tailor-made solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat belt conveyors, inclined conveyors and angled conveyors, to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnet separators, and dosing bunkers – all tailored to customers’ specific requirements. We understand that each industry and project is unique. That’s why we custom-build our solutions to meet your specific needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution – no matter how specialized the requirements! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separators, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnets, filter systems, dosing bunkers, feed hoppers, filling systems

Stanje: rabljeno, masivni stružnica za les z ročno kopirno enoto, od zasebnika, z veliko dodatki, popolna oprema delno v originalni embalaži rabljena, odlično ohranjena, malo rabljena Znamka Flott-Arnz razdalja med središčema cca 1200 mm višina središča cca 250 mm Nodpfx Ajyb S Hkjfmocu ročno kopirna enota, dolžina kopiranja cca 1000 mm štirikraki pogonski center so-vrteča konica 5 stopenj hitrosti: 500 - 2500 obr/min Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakiran predaja v trenutnem stanju, kot ogledano, brez garancije in jamstva

Stanje: novo, obratovalne ure: 2 h, Ostružilec za ostanke lesa BREZ hidravličnega potisnega vozička Moč motorja: 11/15/18 kW, 400 V, 50 Hz Širina rotorja: 595 mm Hitrost rotorja: pribl. 45 obr/min Premer rotorja: 280 mm Sito: Velikost luknje 7 do 30 mm (po izbiri iz kaljenega specialnega jekla) Rezalne kronice: 34 kosov 25×25 mm (votek, 4-stranska uporaba, kaljeno specialno jeklo) Protimesser: do 2 kosa (uporabna na obeh straneh, po izbiri kaljeno specialno jeklo) Kapaciteta pretoka*: do 2 m³/h (*odvisno od materiala) Vhodna odprtina za material: pribl. 600 x 350 mm Ncodpohq T Udofx Afmeu Masivna glavno ležišče Kompaktna krmilna omara z moderno PLC-krmiljenjem in 5 m dolžine kabla Premer priključka za odsesavanje: 200 x 200 mm Dimenzije D x Š x V pribl.: 1.050 x 1.180 x 1.890 mm Teža: pribl. 900 kg 2000 ur garancije na visokozmogljiv menjalnik

Stanje: novo, Universal application (wood, pallets including nails, wood fiberboard and offcuts, veneers, MDF boards, plastic, ...) Motor power: 18.5 kW Rotor length: 550 mm Rotor diameter: 222 mm Rotor speed: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m³/h (depending on material) Extraction connection: 160 mm Material: plastic, cardboard, wood (chipboard, MDF boards, waste, ...) Feed hopper opening: 946 x 567 mm Dimensions (L/W/H): 1880/1120/1670 mm Weight: approx. 1250 kg 2-year warranty or 2,000 operating hours Used machine notice: Ncedpfx Afjgw Sxzemju • Subject to errors in technical details and prior sale. • Stated prices are ex works - loading included! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no claims or warranties. Buyers are free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with full address and phone number!)

Leto izdelave: 2021, stanje: delavnici obnovljeno (rabljeno), Aluminium angle conveyor for shredder Njdpfxoff Hgbo Afmjcu 2000mm horizontal + 2000mm inclined section Dimensions: approx. 3000 x 420 x 105mm Aluminium construction: Conveyor belt width with wave edge PVC conveyor belt Belt color: green, 2-ply, highly cross-stable, endless welded with stepped splice * Antistatic due to threads woven into the running side Drive: Motor approx. 0.55 kW, speed 0.3 m/sec * Frequency converter controllable Connection: 220/400V, 50Hz, protection class IP54 Drive, motor control optional

Leto izdelave: 2019, stanje: novo, Aluminium flat conveyor belt without substructure 3000mm flat Dimensions: approx. 3000 x 500 x 105mm Aluminium construction: Conveyor belt width incl. corrugated edge 500mm Conveyor belt green, 2-ply, especially cross-stable, endless welded with stepped joint * Antistatic due to threads in the running side fabric Drive: Motor approx. 0.25 kW, speed 0.3 m/sec. * Controllable with frequency converter Ncodsff Hf Djpfx Afmeu Connection 220/400V, 50Hz, protection class IP54 Drive and motor control optional

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm Nodpfx Aeh Eld Eofmocu 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Leto izdelave: 2019, stanje: generalkompletno obnovljen (rabljeno), Overband plate magnet Fabrication in stainless steel 1.4301, fully welded Ncodjd Dzahjpfx Afmju 420 x 250 x 100 mm Completely welded housing Lifting eyes for suspension