Wmw Blema Ekscentrična Stiskalnica Z Enim Stolpcem nakup rabljenega (63.515)

Stanje: rabljeno, Single-column eccentric press BERRENBERG Type EPtG 20 - 325 N-0 Machine No. 15342 Year of manufacture: 1974 Pressing force: 20 tons Throat depth: 320 mm Table dimensions: 550 x 350 mm Pass-through hole in table: 190 x 120 mm Ram area: 305 x 140 mm Intermediate plate (L x W x H): 540 x 340 x 55 mm Pass-through hole in intermediate plate: Ø 103 mm Clamping shank bore: Ø 40 mm Stroke adjustment: 8 - 70 mm Ram adjustment: 35 mm Installation height max.: 345 mm (without intermediate plate) Installation height max.: 290 mm (with intermediate plate) Table height above floor: 700 - 750 mm (without intermediate plate) Strokes per minute: 100 to 180 spm Drive power: 1.5 kW Power connection: 380 Volt, 50 Hz - Pneumatic clutch-brake combination, make: ORTLINGHAUS - Electric foot switch and two-hand operation - Infinitely variable stroke rate via variator drive - Table height adjustment via leadscrew approx. 150 mm - Manual central lubrication system BEKA Lubrication Technology - Height-adjustable press table via leadscrew - Electrical schematic Space requirements (L x W x H): 1600 x 850 x 1950 mm Weight: 1250 kg In good condition Credpfxov Tp D Hj Aahsg

Stanje: rabljeno, Leto izdelave: 1997, Pressure: 630 t Stroke: 300 mm Strokes per minute: 10–75 spm Table size: 3600 x 2200 mm Passage width: 4000 mm Ram area: 3600 x 2200 mm Lateral frame passage: 2000 mm Codpfewx R Rdjx Aaherg Ram adjustment: 150 mm Installation height (stroke down, adjustment up): 1000 mm Operating voltage: 400 V Height above floor: 7600 mm Press pit depth: 2500 mm Total power requirement: 160 kW Machine weight: approx. 225 t Space requirement: approx. 750 m² Complete blanking line with decoiling/feeding system and destacking system. System suitable for strip width 300–1600 mm and strip thickness 0.5–3 mm. The machine is equipped with two sliding tables that can be swapped out from the front. The destacking unit is positioned laterally and has two pallet stations. Destacking can also be performed to the rear with 2 pallets. 3-fold coil feeding, each for 25 t; Schnutz decoiler, strip infeed, straightening machine, and roll feeder.

Leto izdelave: 1981, stanje: pripravljen za uporabo (rabljen), Tlačna sila: 650kN, hod: 150mm, premer tlačnega bata: 190mm, razdalja med stebri X/Y: 950mm/460mm, vgradna višina: 500mm, mere mize X/Y: 900mm/870mm, maks. hod: 150mm, delovni tlak: 200bar, dimenzije stroja X/Y/Z: pribl. 1500mm/1750mm/2400mm, teža: pribl. 3000kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Cjdpfx Aajyq R D Hohorg

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Press force: 4000 kN, stroke: 300 mm, table dimensions: 3100x1400 mm, control: Siemens S7, length: 4560 mm, width: 2045 mm, height: 4605 mm, weight: 65 t, with conveyor and soundproof cabin. Cedjlyr Adepfx Aahjrg

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 125 t Cedpfx Aajt Hwuiehorg Frame gap: 1050 mm Stroke: 250 mm Total power requirement: 40 kW Machine weight: approx. 8.5 t Space requirement: approx. m DUNKES CNC control type CNC 1000, controlled draw cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Shearing shock absorption

Stanje: rabljeno, Leto izdelave: 1987, Nosilnost: 300 ton Poraba zraka: 30 m³/h Moč: 38 kW Csdpezxra Rsfx Aahsrg Zasedena površina: 13,20 m² Dimenzije zgornje plošče: 1800 x 900 mm Dimenzije spodnje plošče: 1300 x 1200 mm Višina stiskalnice: 4.000 mm Širina stiskalnice: 2.200 mm Globina stiskalnice: 1500 mm Število udarcev na minuto: 40 ud/min rabljen

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 098211, KP09 Proizvajalec: OMERA, ekscentrična preša tipa H Credpfx Aezxq Uysahog Leto proizvodnje stroja: 1998 Kapaciteta: 500 ton Poraba zraka (m3/uro): 30 Moč (kW): 70 Zasedena površina (m2): 44,12 Lokacija: KOCAELİ/ÇAYIROVA Dimenzije zgornje plošče: 268 cm x 135 cm Dimenzije spodnje plošče: 270 cm x 135 cm Višina preše: 5,25 m Širina preše: 4,10 m Dolžina preše: 2,05 m Število udarcev na minuto: 55 ud/min Proizvajalec podajalnika, razrezalnika in izravnalnika pločevine: Dimeco

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: H 28 16 0401, KP13 Znamka proizvajalca: ALES PRES, eksцентриčna stiskalnica tipa H Letnik proizvodnje stroja: 2017 Kapaciteta: 500 TON Poraba zraka (m3/uro): 30 Moč (kW): 75 Površina, ki jo zavzema (m2): 108,16 Lokacija: KOCAELİ/ÇAYIROVA Dimenzije zgornje plošče: 377 cm x 160 cm Dimenzije spodnje plošče: 350 cm x 160 cm Višina stiskalnice: 6,5 m Širina stiskalnice: 5,2 m Crsdpfx Ajzxq Tcjahsg Globina stiskalnice: 3,2 m Število udarcev na minuto: 70 ud./min Znamka naprave za podajanje, razvijanje in izravnavanje pločevine: Coiltech rabljeno

Stanje: rabljeno, Leto izdelave: 1997, KP03 Proizvajalec: OMERA, ekscentrična preša tipa H Letnik proizvodnje stroja: 1997 Kapaciteta: 500 ton Poraba zraka (m3/uro): 30 Moč (kW): 70 Crsdpszxq N Defx Aahog Zauzeta površina (m2): 44,12 Lokacija: KOCAELİ/ÇAYIROVA Dimenzije zgornje plošče: 268 cm x 135 cm Dimenzije spodnje plošče: 270 cm x 135 cm Višina preše: 5,25 m Širina preše: 4,10 m Dolžina preše: 2,05 m Število udarcev na minuto: 55 ud/min Proizvajalec podajalnika, odvijalnika in poravnava pločevine: Dimeco Uporabljen

Stanje: rabljeno, Leto izdelave: 2000, stiskalna sila: 260 t, hod: 250 mm, širina mize: 840 mm, dolžina mize: 1.500 mm, zračni tlak: 9,807 letvica, priključek za stisnjen zrak: 9,807 letvica, nastavitev hidravličnega cilindra: 120 mm, Ponujamo rabljeno ekscentrično stiskalnico Chin Fong OCP-260N z dvojnim stebrom, letnik 2000. Model: OCP-260N Tovarniška številka: A00373 Letnik: 2000-11 Kapaciteta: 260 ton Frekvenca hoda: 20 – 40 hodov/min Hod: 250 mm Največja višina orodja: 500 mm Codpfxjykbcmj Aaherg Zračnost zgornjega udarca: 7 mm Nastavljiv razpon plošče: 120 mm Površina zgornje plošče (D × Š): 1130 × 700 mm Površina spodnje plošče (D × Š): 1500 × 840 mm Moč glavnega motorja: 22 kW Število polov: 4 Teža stroja: 31,8 ton Tlak stisnjenega zraka: 9,807 bar Temp. olja maks.: +100 °C Temp. olja min.: -10 °C Prostornina olja: 180 litrov Za vsa vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.

Stanje: generalkompletno obnovljen (rabljeno), EXZENTERPRESSE SGP TYP: PEZZ 500/1700/1000 PRESSKRAFT: 500 t TISCH: 1700 x 1000 mm HUBLÄNGE: 20–153 mm ABSTAND STÖSSEL OBEN–TISCH: 800 mm ABSTAND STÖSSEL UNTEN–TISCH: 700 mm GEWICHT: 40 t HERGESTELLT IN ÖSTERREICH Crsdpfxehqqnze Aahsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, številka stroja/vozila: 8900, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 20 t, hod: 60 mm, globina grla: 176 mm, nastavitev hidravličnega cilindra: 55 mm, maksimalna frekvenca hodov: 155 obr/min, TEHNIČNE PODROBNOSTI Pritisk stiskalnice: 20 t Število hodov: 155 hodov/min Hod bata: 6 - 60 mm Nastavitev bata: 55 mm Vpenjalna površina bata: 130 x 248 mm Luknja za čep v batu: 25 x 65 mm Naklon: 28 ° Izmet: 176 mm Razdalja med mizo in batom: 270 mm Prehodna širina: 470 mm Dimenzije mize: 300 x 450 mm Prehodna odprtina v mizi: 90 mm Višina mize nad tlemi: 775 mm Credpfozb Du Hjx Aaheg Potreben zračni tlak: 5,5 - 6 bar PODROBNOSTI O STROJU Skupna potrebna moč: 3,5 kW Način krmiljenja: konvencionalno Dimenzije in teža Dimenzije stroja (D x Š x V): 1.300 x 1.100 x 1.950 m Teža stroja: 1 t OPREMA Visoko zmogljiva stiskalnica Centralno mazanje z varnostno svetlobno zaveso Linuflex (nadzorovana) Števec hodov Jeklena plošča (dimenzije: 315 x 400 x 50 mm) z izvrtino na sredini (premer: 63 mm)

Stanje: novo, Pressure: 60 Stroke: 250 Total power requirement: 7.5 kW Weight approx.: 4000 kg Dimensions (LxWxH): 1,820 x 960 x 2,400 mm Table size: 750 x 500 mm Ram surface: 500 x 430 mm Table borehole: 100 mm Installation height: 450 mm Working speed: 8.5 mm/s Return speed: 47 mm/s Rapid traverse: 26 mm/s Front light curtain Cedpfx Aasd Ab Ixjherg Pressure adjustment Two-hand operation T-slots in table and ram Stroke adjustment 2 ram round guides In accordance with CE regulations (Sample image)

Stanje: novo, Pressure: 100 Stroke: 300 Total power requirement: 7.5 kW Approximate weight: 5400 kg Dimensions (LxWxH): 1900 x 1300 x 2750 mm Table size: 1100 x 600 mm Ram area: 680 x 420 mm Bore in table: 120 mm Cjdpfxjd Ab Iyo Aahorg Installation height: 500 mm Working speed: 5.5 mm/s Return speed: 37 mm/s Rapid traverse: 17.5 mm/s Front light curtain Pressure adjustment Two-hand operation T-slots in table and ram Stroke adjustment 2 round ram guides Complies with CE regulations (Sample photo)

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Csdpsm Nntyjfx Aahsrg Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Bore in table: 120 mm Draw cushion return speed: 52 mm/s Draw cushion stroke: 200 mm Draw cushion pressing force: 30 t Motor power: 11 kW Return speed: 165 mm/s Working speed: 8.5 mm/s Rapid traverse: 100 mm/s Installation height: 750 mm Pressure: 100 t Ram dimensions: 900 x 600 mm Cjdpfxsd Ab Imo Aahsrg Table size: 1100 x 700 mm Dimensions (LxWxH): 2,180 x 1,600 x 3,350 mm Approx. weight: 9,300 kg Total power requirement: 11 kW Stroke: 500 mm Equipment: - Light barrier - Draw cushion - Manual and automatic operation - Self-lubricating ram guides - Execution according to CE regulations

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Csdpfsmmuq Isx Aahsrg Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) Crjdpfemr Hpcsx Aahog With lateral safety door (doors slide to the rear)

Stanje: novo, Pressure: 125 t Ram Adjustment: (automatic adjustment) 40 mm Maximum Stroke Length: 10–125 mm Total Power Requirement: 11 kW Approx. Weight: 8,000 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Technical Data Press Force: 125 t Strokes per Minute: 50 spm Table Size: 900 × 700 mm Ram Size: 700 × 500 mm with pin receptacle Stroke Adjustment: 20 – 125 mm Ram Adjustment: 40 mm Installation Height: 475 mm Equipment & Features Control System: Siemens S7-1200 PLC Operating Display: 9” Siemens Touch Panel Precise stroke setting directly via the display Adjustment of min. & max. stroke count Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety architecture in the control cabinet Light curtains: SICK, PILZ or LEUZE (Category 4, CE compliant) 2 rupture discs – included in delivery Lower support plate for safe transportation Anti-reach protection – for maximum occupational safety Csdpfx Asktm N Dsahsrg Pneumatic clutch & brake combination The machine impresses with an exceptionally comprehensive range of standard equipment at the highest technical level. The use of brand components such as Siemens, PILZ, and SICK ensures maximum reliability and durability.

Stanje: novo, Pressure: 150 Ram Adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10–125 mm Total power requirement: 15 kW Cjdpfxstqwtde Aahjrg Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes/min: 50–90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7 – 1200* Stroke adjustment: directly via control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: solid steel construction Guidance: inner and outer eccentric guide Crankshaft: made of hardened 4140 steel Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand control and foot pedal possible Lubrication: automatic lubrication system Overload protection: hydraulic Safety device: safety enclosure around work area External connections: 8-pin inputs & outputs on PLC (for signal exchange & upgrades) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/frequency: 400 V / 50 Hz Fuse: 32 A required Standards: Machine and equipment compliant with CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Press force: 150 t - Table plate: 750 x 1000 mm (fixed table plate) - Stroke length: 10–125 mm, automatic stroke adjustment via PLC - Slide plate: 500 x 800 mm (Ø 55 mm pin receptacle & T-slots as per customer request) - Strokes: 50–90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm - Weight: approx. 9,500 kg - Ram adjustment: 40 mm (automatic adjustment)

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Tiskalna sila: 5.000 kN Crodsyg Emzepfx Aahog Površina mize: 2.400 mm x 1.700 mm Površina bata: 2.400 mm x 1.400 mm Nastavljiv hod: 25 mm - 200 mm Maks. nastavitev bata: 200 mm Število hodov: 20 - 100 1/min Pogonska moč: 84 kW Teža stroja cca 62.500 kg Z valjčnim podajalnikom in ravnalno kombinacijo + odvijalec Dodatni podatki in slike na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Specifikacije Proizvajalec: IMV Model: DM125 Codpfxsyw Uf Ao Aaherg Leto: 2016 Stanje: Rabljeno Skladiščna številka: 0396 Sila drsnika: 1.250 ton Število pritiskov: 2 Kinematika: Ekscentrična, menjava hoda Hod drsnika: 250-400 mm Število udarcev/min: 5-35 VERTIKALNA SVETLOBA od držala za matrico, CBRA: 1.150 mm Dimenzije mize: 4.500 x 2.000 mm Dimenzija drsnika: 4.500 x 2.000 mm Stranska odprtina okvirja: 2.600 mm Maks. odprtina sprednjih stebrov: 4.900 mm Premični voziček: 2 kosa Moč glavnega motorja: 290 kW Teža preše: 310.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Proizvajalec: ROVETTA Model: S4-1500 Link Drive Leto: 2001 Stanje: Rabljeno Inventarna številka: 0391 Izdelovalec: Rovetta Število batov: 4 Sila drsnika: 1500 ton Hod drsnika: 763 mm Nastavitev drsnika: 400 mm Svetla višina spodnji hod/zgornja nastavitev: 1.200 mm Razdalja med sprednjimi stebri: 5.700 mm Dimenzija mize za orodja: 5.500 x 2.500 mm Dimenzija drsnika: 5.500 x 2.500 mm Višina premične mize: 600 mm Dimenzija stranskega okna: 3.400 x 1.900 mm Moč glavnega motorja: 319 kW Sila spodnjega pritisnega blazinica: 150 ton Cedpeyq Tdijfx Aahsrg Hod spodnjega pritisnega blazinica: 250 mm Delovno območje spodnjega pritisnega blazinica: 2.000 x 1.200 mm Število udarcev/min: 8-24

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Proizvajalec: ROVETTA Model: S4-800 Leto: 2001 Stanje: Rabljeno Številka zaloge: 0392 Proizvajalec: Rovetta Sila drsnega bloka: 800 ton Število potisnih točk: 4 Hod drsnega bloka: 700 mm Crjdpfoyq Tdpjx Aahog Nastavitev drsnega bloka: 350 mm Število udarcev/min: 10-24 Višina orodja pri spodnjem gibu in zgornjem položaju drsnika: 1.100 mm Uporabna razdalja med sprednjima stebroma: 4.200 mm Dimenzija mize za orodje: 4.000 x 2.000 mm Dimenzija drsnika: 4.000 x 2.000 mm Višina premične mize: 600 mm Dimenzija stranskega okna: 3.400 x 1.900 mm Število blazin: 1 Sila hidravlične blazine (skupaj): 150 ton Hod spodnje hidravlične blazine: 250 mm Delovno območje spodnje hidravlične blazine: 1.500 x 1.000 mm.

Stanje: rabljeno, Single-column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, ram at TDC, largest stroke: max. 469 mm Installation height, ram at BDC, largest stroke: max. 387 mm Strokes: 50–200 strokes/min Main drive motor power: 18.5 kW Power supply: 400 Volts, 50 Hz - Hydraulically operated multi-disc wet clutch and spring-actuated safety brake - Infinitely variable drive via PIV gearbox with crawl speed for automatic stroke adjustment and setup operations - Hydraulic overload protection in ram - Press force and process monitoring via UNIDOR APS - Pneumatic, infinitely adjustable ram counterbalance - Roller feed MABU WE16, 160 x 3 mm, feed length programmable - Centralized grease lubrication - Operating manual and press documentation Crodpfxsx U Eias Aaheg Includes: Roller Feed Device MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feed control MABU Space requirements eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons