Visokovakuumska Naprava Za Odsesavanje Dimnih Plinov nakup rabljenega (85.608)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 200 mm, skupna širina: 500 mm, skupna višina: 1.700 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, številka stroja/vozila: 2026, +++ NOVO Lillnord klimatska naprava / klimatska naprava za fermentacijske prostore NOVO +++ Vrhunski model: PG 1000 Zmogljiv z napredno tehnologijo za vse fermentacijske prostore do 6 m² Temperaturno območje od +20 do 45°C, nastavljivo preko termostata Območje vlage od 60 do 95 % rH, nastavljivo preko higrostata Samodejna regulacija vode dolga življenjska doba! zaradi preverjenega »Lillnord sistema« Mere: 500 x 200 x 1700 mm, ŠxGxV samo pri nas je preizkušen po standardu DGUV V3 Priključek 400V, 16A-CEE vtič NOVO naprava & SAB preizkušena z garancijo + servisom rezervnih delov Možnosti: Dostavna storitev Vzdrževalna pogodba Uvajanje in zagon Stojalo Leasing in najem Iijdpfxefvvnmj Ab Asb Obiščite našo veliko skladišče pekarske opreme!

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Iisdoyqr Sxjpfx Ab Asb

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tensión de conexión: 380 V, potencia conectada: 7,5 kVA, consumo energético específico 2 kW/m² Ensayos de intemperismo UV global con espectro global [similar al arco de xenón], pero con lámparas fluorescentes Volumen de la cámara de prueba: 200 litros Superficie de prueba: 0,75 m² Dimensiones de la cámara de prueba (Al x An x Pr): 1100 x 800 x 250 mm Rango de temperatura sin aislamiento: -20°C a +90°C Ijdpfjytr Swex Ab Asib Rango de temperatura con aislamiento: +10°C a +90°C Constancia de temperatura: ±2K Rango de temperatura del punto de rocío: +5°C a +40°C Rango de humedad: aprox. 15 - 95% h.r. Humidificación de muestras con 8 boquillas pulverizadoras El sistema utiliza fuentes de luz UV fluorescente para simular en laboratorio el espectro dañino de la radiación solar, acelerando así los efectos de envejecimiento como cambios de color, pérdida de brillo, formación de grietas, fragilización y degradación del material. Los ciclos programables de exposición UV, control de temperatura y fases opcionales de humedad y condensación reproducen y repiten de forma reproducible las cargas ambientales prácticas. Desmontaje a cargo del comprador.

Stanje: novo, Leto izdelave: 2021, Teža / kg Nosilec MK / Material: železo Isdpsy S Dxhofx Ab Aeib 200 x 60 x 150 mm Velikost odprtine: 150 mm Magnetna sila: 10-20 kg Na zalogi: 4

Stanje: novo, Optični pripomoček za nastavljanje ničelne točke osi Z Za določanje višine v osi Z. Uporaba: Napravo se postavi na obdelovanec, nato se z mirujočim orodjem previdno približamo napravi. Ko zasveti LED-lučka, je dosežena referenčna mera 50 mm. Varnostni vzmetni hod je 2 mm. Osnovna površina Ø 54 mm Višina 50 mm Merilna površina Ø 15 mm 3 magneti v osnovi Teža 0,35 kg Iedsym U Twepfx Ab Ajib

Leto izdelave: 2004, stanje: rabljeno, Funkcionalnost: nepreverjeno, Profesionalna mobilna točilna naprava iz gastronomije. Kompaktna enota z integriranim hlajenjem in pomivalnim koritom – idealna za dogodke, pivovarne, degustacije ali začasne bare. Dalj časa ni bila v uporabi, potrebna je pregled in servis. Proizvajalec: HAGOLA Gastronomie-Technik Tip: hkt16 Letnik: 02/2004 Priklop: 230 V / 50 Hz Hladilno sredstvo: R134a Moč agregata: 460 W (do pribl. –10 °C) Iodjy Srkfjpfx Ab Aoib Oprema • 3 točilne pipe na nerjavni jekleni koloni • Integrirano hlajenje piva (pretokovni hladilnik) • Pomivalno korito z armaturo • Odkapna posoda / površina iz nerjavečega jekla • Podstavek s tehničnim prostorom in kolesi • Cevovodi in deli glede na slike Stanje Naprava je bila do demontaže v obratovanju. Potem skladiščena. Rabljeno stanje z običajnimi sledmi uporabe. Priporočamo preverbo delovanja pred ponovnim zagonom. Uporaba Točilna postaja na dogodkih, pivovarskih slavjih, bar na prostem, catering.

Stanje: rabljeno, Teža / kg Vpenjalna glava MK / Vključeno v dobavo: Proizvajalec: Lenzkes 5x nizkoprofilne sponke LH 012 4x nastavki za zvišanje vpenjanja (veliki) Iodsy Suqhopfx Ab Aeib 3x nastavki za zvišanje vpenjanja (mali) 2x neustrezni primeži

Leto izdelave: 2022, stanje: novo, Lundberg WasteTech 400 unité tout-en-un pour extraction de bandes de bordure Capacité d’aspiration maximale : 6000 m³/heure (3540 CFM) Diamètre de tuyau maximal : 315 mm (1’-1”) Distance d’aspiration maximale : jusqu’à 30 m (100’) Dimensions (LxlxH) : 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Poids : 615 kg (1,356 lbs) Puissance du ventilateur d’aspiration : 15 kW (20 HP) Alimentation : triphasé, 230-460V, 50-60 Hz Niveau sonore : 68-72 dB (A) Couleur : bleu, RAL 5010 Inclut les accessoires suivants : Unité antistatique Filtre M5/M6 avec capteur de pression différentielle Convertisseur de fréquence WT400 Capteur de niveau du sac Système TubeBag (sac continu) Ijdpfxoy Sbc Rs Ab Asib Selon le fabricant, l’aspiration simultanée de jusqu’à 24 bandes de bordure est possible. L’unité est en état quasi neuf et n’a été utilisée que quelques heures. Visite sur site possible. Prix neuf de l’unité environ 65 000 € options incluses.

Stanje: rabljeno, natančni koti in poševni rezi od 0° do 46°, z digitalnim prikazom kota Lokacija: Nattheim Iijdpfxewhzg Ue Ab Asb

Stanje: dober (rabljeno), Soldering device for carbide-tipped saw blades VISCAT model BC500 Iiodpjigv Ebofx Ab Aeb

Stanje: rabljeno, Leto izdelave: 1994, Odsesovalni filter z vrečami rabljeno Leto izdelave: 1994 z vremensko zaščitno oblogo s povratnim vodom zraka z ventilatorjem S 250 Pretok: 4590 m³/h Motor: 4 kW Razpoložljivost: kratkoročno Lokacija skladišča: Villingen-Schwenningen Ob lastni demontaži in prevzemu na lokaciji je naprava na voljo za 500 € + DDV Iisdpfoy Nuhhex Ab Aeb

Stanje: rabljeno, transportni vibracijski spiralni podajalnik / sortirni stroj / spiralni podajalnik / vibracijski podajalnik RNA vibracijska posoda, sortirna naprava / podajanje vijakov z vibracijskim podajalnikom za vijačno tehniko podajališni sistem, podajališna naprava proizvajalec: RNA Rhein-Nadel Automation GmbH tip: SRC-N 250-2L leto izdelave: ca. 2000 premer posode spodaj: 300 mm premer posode zgoraj: 350 mm notranja višina posode: ca. 25 mm širina sortirne proge: ca. 30 mm grupna višina (pogonska enota + posoda z linijo za sortiranje): 380 mm vibracijska frekvenca: 100 Hz / 6000 min-1 napajalna napetost: 230 V, 50 Hz - Podajalnik je bil uporabljen za podajanje avtomobilskih taljivih varovalk Iisdpfxey N Dvbo Ab Aob potrebna površina Ø x V: 420 x 390 mm teža: 52 kg dobro stanje Spiralni vibracijski podajalnik je sestavljen iz dveh glavnih komponent: 1) sortirna posoda, v kateri se deli usmerjajo 2) pogonska enota, ki z mehanskimi vibracijami povzroči premikanje delov v sortirni posodi.

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), MMM Uniclean® PL II 15 Single-Chamber Washer-Disinfector (As-New Condition, Year of Manufacture: 2017) Product Description (Source: MMM) High-performance single-chamber washer-disinfector for the thorough reprocessing of large quantities of medical devices such as general surgical and minimally invasive (MIC) instruments, anaesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. User Convenience - Loading baskets can be conveniently accessed from all four sides. - Easy-move rollers: Even heavy baskets can be moved effortlessly and positioned precisely inside the chamber. - Glass control panel – easy to clean. - Rubberised CoolTouch handles allow handling of hot baskets. Frame and front panel made from stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Double-glazed doors with securitised safety glass Glass panel with integrated 5.7" colour touchscreen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not external steam) Doors: Double-door Voltage: 380 – 400 V / 50 Hz Heating: Electric Machine Equipment - DI water preheating tank (Tank 1) - DI water recovery tank - Sound insulation on front (Tank 2) - Sound insulation on device front - Sound insulation on side wall - Exhaust air economiser - Air break for exhaust Isdpeimdtvsfx Ab Aeib - Conductivity measurement system - HEPA filter monitoring - Volt-free contacts - Return sluices Site-side Media Connection - Hot water connection Dosing System - 3 suction lances - 3rd dosing pump including accessories Roller Conveyor - Semi-automatic transport - Basic module for automatic roller conveyor - Preparation for automatic loading roller conveyor - Preparation for automatic unloading roller conveyor Batch Documentation and Machine Connectivity - Barcode reader system UPL II (wired) - Barcode reader for basket identification We do not assume any liability for the accuracy, completeness, or timeliness of the information provided.

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Tehnični podatki: Pomik v X/Z: 100/500 mm Vpenjalna površina: 600 x 450 mm Križna miza (X/Y): 100/50 mm Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Iodsy Dy A Topfx Ab Aeib Contracer: C-3200 Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Stanje: pripravljen za uporabo (rabljen), Zwick Roell Z030 naprava za natezne preizkusevanje Preizkusna sila: 30 kN Iedpfxey Nilzo Ab Aeib Poraba: 2,3 kVA Preizkusni prostor: spodnji preizkusni prostor: višina 1355 mm zgornji preizkusni prostor: višina 1380 mm Širina: 440 mm Vabljeni na ogled naprave. Po želji lahko za vas organiziramo ugoden prevoz! Prejeli boste uradni račun. Za tuje stranke je možna izdaja računa brez DDV. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo spletno trgovino in si oglejte tudi ostale ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov ter služijo zgolj za identifikacijo in opis izdelkov. Pridržujemo si pravico do sprememb tehničnih podatkov ter napak v opisu izdelka.

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Isdpfx Abew Ivqme Aoib Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, Bela električna naprava za Spritzkuchen Električni stroj za Spritzkuchen Model: ESFG z nosilcem za steno preverjen po DGUV V3 neprekinjeno nastavljiv priklop 230V, pripravljen za uporabo Rabljeni stroj Možnosti: Quarkbällchen (skutine kroglice) Spritzkuchen Ringkrapfen / krofi (donuts) Ijdpfx Aey H Ur Ujb Asib

Stanje: pripravljen za uporabo (rabljen), Na prodaj: puhalo Aerzen GM150S. Ijdpfxey Rhyts Ab Ajib

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), številka stroja/vozila: 121, more MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Iisdpfx Absh Eib Ee Aeb

Stanje: zelo dobro (rabljeno), Prodajam profesionalno napravo za nastavitev batnih merilcev SUBITO – Schwenk ESU. Zelo dobro ohranjena, komplet v originalnem lesenem kovčku z navodili. • Model: SUBITO Einstellgerät ESU • Proizvajalec: Oskar Schwenk GmbH, Nemčija • Popolna oprema • Stabilno litoželezno ogrodje • Natančna nastavitev in mikrometrično pomikanje • Idealno za nastavitev batnih merilcev SUBITO, ESS, ESU • Vse skupaj kot novo. Ijdpfx Asx A Ia Isb Aoib

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Iijdpfx Asym Unzjb Aeb Orbital cutting is a time-saving and cost-effective solution: - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) Ijdpsxn Ax Aofx Ab Asib • Readout system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English • Supplied with original documentation and complete set of connectors Condition: • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: zelo dobro (rabljeno), Device for precise setting, measurement, and inspection of CNC cutting tools. System equipped with EZset optical camera and EZvision software (Image Controller 1). In very good condition, complete, ready for operation. Technical data and features: Iiodpfx Abexn Awxj Aeb • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axis: up to 400 mm • Camera with image processing system • Tool edge, length, and diameter measuring functions • Data saving and printout capability • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture approx. 2018–2019 • Complete with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal / transverse axes reference properly • Well-maintained unit from a German tooling facility Functional description: PRECIsset 400 enables fast and repeatable setup of tools before CNC machining. The EZset vision system allows for blade geometry analysis and tool wear monitoring. High measurement accuracy is ensured by a stable column and industrial-grade optics.

Leto izdelave: 2018, stanje: rabljeno, sestavljen iz: pražilnega ciklona, transporta surove kave, ročnega upravljanja, gorilnika za dim Iisdsy D Tyxopfx Ab Ajb

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN-22-1409, For sale is a high-quality extraction unit from the brand Absaugwerk, year of manufacture 2023, specifically designed for the capture and filtration of welding dust (e.g., aluminum dust). The unit complies with the latest technical standards and includes: Equipment: • Downdraft extraction table • Integrated wet separator according to current safety standards • Suitable for professional use in welding operations • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: near new, fully functional Collection by the buyer; assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. An on-site inspection can be arranged by appointment. Other metalworking machines available, such as bench drilling machines, press brakes, pillar drilling machines, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding units, compressors, etc. – please also see my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by the buyer or by arrangement. Iodpex Da Tijfx Ab Asib If you are interested or have any questions, please feel free to send me a message. Additional photos and technical details available on request. All information is provided without guarantee or warranty. Subject to prior sale and errors. For further questions, please call. Nous parlons francais / Мы говорим по-русски We speak English / Noi vorbim româneşte Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. We can transport vehicles to the port for an additional fee.