Tornos Delta 20/5 nakup rabljenega (76.450)

Stanje: rabljeno, prevoženi kilometri: 1.049.117 km, moč: 235 kW (319,51 KM), prva registracija: 08/2010, vrsta goriva: dizel, število sedežev: 45, vrsta prenosa: samodejen, naslednji pregled (TÜV): 09/2024, emisijski razred: Euro 5, barva: rdeča, zavore: retarder, Oprema: ABS, parkirni grelec, * Clean vehicle * Well-maintained interior * In operation / immediately ready for use * Currently registered, no pending repairs * Mileage may slightly increase * Registered hygiene protection wall against COVID-19 * 45 seats * 37 standing places * Euro 5 engine / EEV * Engine code: 1999/96/EC, C, EEV, VKM:G1 * New MOT in July 2022 Fpjdexdgrlepfx Anfjg * All information provided without guarantee * Subject to prior sale

Stanje: rabljeno, prevoženi kilometri: 1.070.521 km, moč: 235 kW (319,51 KM), prva registracija: 06/2010, vrsta goriva: dizel, število sedežev: 43, vrsta prenosa: samodejen, naslednji pregled (TÜV): 04/2025, emisijski razred: Euro 5, barva: rdeča, zavore: retarder, Oprema: ABS, klimatska naprava, parkirni grelec, * Čisto vozilo * Urejena notranjost * Takoj pripravljeno za uporabo! * Brez zaostalih popravil! * Klimatska naprava za voznika in potniški prostor * Registrirana zaščitna pregrada proti covidu * 43 sedežev * 38 stojišč Fedpfx Aolcx Hbsnfspg * Motor Euro 5 / EEV * Oznaka motorja: 1999/96/ES,C,EEV,GKL:G1 * Nov tehnični pregled po dogovoru * Vozilo registrirano in v uporabi * Stanje števca kilometrov na 31.12.2025 * Število kilometrov se bo rahlo povečalo! * Vse informacije brez garancije * Vmesna prodaja pridržana

Stanje: rabljeno, Leto izdelave: 2014, dvižna višina: 3.300 mm, vrsta goriva: električni, dolžina vilic: 1.200 mm, Unladen weight: 3,851 kg Lifting capacity: 2,000 kg Overall height: 215 cm CE marking: yes General condition: average Technical condition: average Visual condition: average Please contact Christian Theißen for further information. Manufacturer: Doosan Model: B20T-5 FFT Fjdpfxov Tigno Anfepg Year of manufacture: 2014 Product type: Used Specifications: Maximum lift height: 3.30 m Maximum load capacity: 2,000 kg Fork length: 1.20 m Drive type: Electric Overall dimensions LxW (without forks): 2.12 x 1.09 m Overall height: 2.15 m Net weight: 3,851 kg Special features: Sideshift, overhead guard, front windshield, trailer operation possible.

Stanje: rabljeno, Leto izdelave: 2021, Übersicht Dieser isobarometrische Füller wurde im Jahr 2021 vom deutschen Hersteller Markl gebaut. Er kann Dosen und Glasflaschen abfüllen. Dieser Füller ist verfügbar, da der Verkäufer die komplette Anlage verkauft. Er hat nur wenige Betriebsstunden und kann jederzeit persönlich besichtigt werden. Technische Daten Typ: Isobarometrischer Füller für Flaschen und Dosen Leistung: 8.000 Flaschen / Stunde (je nach Format) Anzahl der Füllventile: 20 Formate: Flaschen: 0,33 L Longneck und 0,75 L Cava Dosen: Standard 0,33 l und 0,44 l Gegendruckfüller Laufrichtung: links - rechts Abmessungen (L x B x H): 2,0 m x 1,8 m x 2,5 m Betriebsgeschichte: In Betrieb: Juni 2021 - Juni 2024 Letzter Produktionslauf: Juni 2024 Abgebaut: Februar 2025 Geschätzte Gesamtbetriebsstunden: ca. 625 Stunden (~500.000 Liter gefüllt bei 2.500 Einheiten/Stunde) Fsdot Rmhmspfx Anfopg Guter Zustand, bereit zur Wiederinstallation

Stanje: novo, Leto izdelave: 2026, Driven transport trolleys in compact design and with low installation heights, available with 10, 24, 40, or 48–80 ton load capacities. Intelligent single-joystick control for all movements. Versions with lifting function (+H) possible, as well as DUO models for controlling two trolleys simultaneously. Please send us your inquiry. Fpodpfx Ajgi Dm Hjnfsg

Leto izdelave: 2004, stanje: dober (rabljeno), Machine designation: Cassette filter Manufacturer: Infastaub Model: MKR 5/20-5/20 RO Year of manufacture: 2004 Dimensions: L 4200 (5000) x W 1200 (1400) x H 2400 (2700) mm Empty weight: approx. 4.5 tons Fjdemzauropfx Anfopg Technical documentation: Yes Remarks: Operating voltage 400V / 50Hz, control voltage 24V DC, airflow rate 8040 m³/h, max. operating temperature +80 °C, compressed air pressure 6 bar, filter surface area for stage 1 and 2 each 100 m², max. filter resistance stage 1 and 2: 25 mbar, raw gas manifold Ø D6: 315 mm, M6: 725 mm. Without filter cassettes Accessories: Control unit Condition: Used, good Price: On request

Stanje: rabljeno, Wire electrode, welding wire, welding wire Fpedpfx Anjff Aq Iofog - Welding wire: Avesta 904L - EN: 12072 AWS A5.9/SFA 5.9 ER385 - Diameter: 1.00 mm - Dimensions: Ø 300/100 mm - Spool weight: 8.9 kg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 180 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Travel X/Y: 50/325 mm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Power-on hours: 31,902 h - Spindle hours: 12,146 h EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar loader: IEMCA 338-HD - Coolant reservoir - Electrical transformer Fjdpouha Sljfx Anfepg - Number of driven tool holders: 3

Stanje: dober (rabljeno), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Jaws -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available at extra cost -Quantity: 2 units of power chucks available -Price: per piece Fjdpfx Aob Ix Nisnfopg -Dimensions: 400/330/H285 mm -Weight: 84 kg

Stanje: rabljeno, Burner nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting unit - Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar - Cutting range: 10 to 20 mm Fjdpfx Anoh Uhmrsfopg - Pressure: 5 bar - Diameter: 19 mm - Length: 47 mm - Quantity: 24 pieces available - Price: complete - Total weight: 1.2 kg

Stanje: rabljeno, Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamp, PV roof hooks - Manufacturer: Parco, adjustable solar mount roof hooks, 20 pcs/carton - Type: Zinni Flex 150 x 60 x 5 - Ref.: 574DHVS - Material: Stainless steel 1.4016 - Quantity: 27 cartons available Fsdpfxjtpyq Ho Anfspg - Price: per carton - Carton dimensions: 350/230/H235 mm - Weight: 17.8 kg

Stanje: rabljeno, Rubber protection mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor strap Fpjdpfx Anjirui Ejfjg -Manufacturer: Forbo Siegling, conveyor belt type E 5/20/A3 MT FDA -Width: 50 mm -Length: 100 m -Thickness: 2 mm -Quantity: 1 conveyor belt available -Price: per piece -Transport dimensions: Ø 490 x 50 mm -Weight: 8.2 kg/pc.

Stanje: delavnici obnovljeno (rabljeno), For sale: 4-sided planer with 5 heads: Winter Timbermax 5'-20 DELUXE, year 2013 The machine has undergone a comprehensive technical overhaul (we have been servicing woodworking machinery for 20 years, so the inspection was carried out professionally). All bearings on the spindles, motors, and cardan shafts are new! – Planing width: 20 – 200 mm – Planing height: 8 – 200 mm Fodpfx Asudimkenfepg – 5 spindles – Spindle diameter: Ø 40 mm – Spindle speed: 6000 rpm – Stepless feed speed adjustment: 8 – 33 m/min (inverter controlled) – Central lubrication system for the tables and guides – Lower infeed roller significantly facilitates material feeding – Machine suitable for both wet and dry wood processing Spindle arrangement: 1. Bottom spindle 2. Right spindle 3. Left spindle 4. Top spindle 5. Bottom spindle

Stanje: dober (rabljeno), Nastavek za rezanje navojev, nastavek za navoje, nastavek za navojne svedre, vrtalni nastavek, vpenjalna glava, hitrovpenjalna vrtalna glava Fsdpjx H N Rlofx Anfepg - Proizvajalec: FRONTAL ABW, hitrovpenjalna vrtalna glava z MK3 vpenjalom - Tip: 5-20 mm - Dimenzije: Ø 75 x 257 mm - Teža: 2,9 kg

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Fpsdpomdn Imsfx Anfjg Dimensions: Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor loading: Approx. 8 daN/cm² Axes 1 movable headstock: Z1, S1 2 independent linear tool systems on vertical slides: X1 / Y1 (S6) – X2 / Y2, S2 1 front tooling unit, 4 spindles: X3 / Z3 1 independent pickup spindle: Y4 / Z4, S4 1 independent tool system for rear machining: X4 (S5) General Data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Maximum workpiece length: With rotating guide bushing: 180 mm Operation in collet: 30 mm Main spindle speed: 12,000 rpm Spindle rotation direction: Preferably: right-hand Main spindle motorization: Continuous duty: 2.2 kW Intermittent duty: 3.7 kW Pickup spindle motorization: Continuous duty: 1.5 kW / Intermittent: 2.2 kW Headstock collet type: F20 Guide bushings: Rotating, fixed Guide bushing collet type: Meister: 605 Number of tools for main operation: Fixed: 2 x 5 / Driven: 3 + 3 Number of front tools: Fixed: 4 / Driven: 3 Tool cross-section: 12 x 12 mm Tool collets: Rotating standard: ESX 20 Number of tools in rear machining: Fixed: 3 + 3 / Driven possible: 3 + 3 Bar loader: Yes Parts removal: Basic version Machine type: Sliding headstock Machine axis height: 1100 mm Headstock travel: 255 mm Barloader position: Right of operator Bar capacity: 1–16 mm Telescopic tube bore: 6–17 mm Spindle speed: Left / right: -12,000 to 12,000 rpm Headstock feed rate: Max. 20 m/min No liability is accepted for the correctness, completeness, or up-to-dateness of this information.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 500 Ah, napetost baterije: 80 V, skupna višina: 627 mm, skupna dolžina: 1.025 mm, skupna širina: 708 mm, Tested forklift battery for your forklift – 80V 4PZS 500Ah – DIN A + 1 year warranty + including Aquamatic system + including end cable & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and more: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Fjdjy Rnr Aopfx Anfspg Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes are available, please inquire. Transport available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Fpsdpfx Aowf I Rzjnfog Operating hours: 14,100 h Incl. various accessories

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Stroke: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 Fsdpsy Aprnsfx Anfjpg - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1500 kg EQUIPMENT - CNC control: Fanuc - Driven tool motorization on: S2, S3, S5 - Powered guide bush - Parts ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE Fpodpfoy Aprhox Anfeg - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° BUSH HOLDER 1 - Number of positions: 4 BUSH HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg EQUIPMENT - CNC Control: Fanuc - Driven tools powered on: S2, S3, S5 - Powered guide bushing - Part ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm Fedpfx Ajy Aprbsnfopg - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1,500 kg EQUIPMENT - Control: Fanuc - Driven tool motorisation at: S2, S3, S5 - Driven guide bushing - Parts catcher - Coolant tank - Bar feeder: LNS TRYTON

Stanje: novo, Samocentrirni štirivpenjalni vpenjalni stroj je namenjen za vpenjanje na stružnicah, vrtljivih mizah, rezkalnih strojih Vpenjanje po standardu DIN 55029 Kaljene in brušene delovne površine zagotavljajo daljšo življenjsko dobo ob ohranjanju natančnosti in ponovljivosti Uravnotežen spiralni disk in celotni vpenjalni stroj omogočata uporabo višjih obratov med obdelavo brez večjih vibracij Neposredno pritrjevanje na obdelovalni stroj na konico vretena tipa CAMLOCK Tehnični podatki: Parameter Vrednost Enota litoželezni stružniški vpenjalni stroj s štirimi čeljustmi 3744 BISON A 200 mm St. 1:4 5 mm B 78 mm E 55 mm F 104,8 mm Q 6 Fedpsyw Tupsfx Anfjpg J 29 mm Teža 19 kg Oprema: stružniški vpenjalni stroj enodelne trde zunanje čeljusti enodelne trde notranje čeljusti ključ

Stanje: zelo dobro (rabljeno), Na prodajo motorni reduktor priznane nemške znamke KEB Antriebstechnik. Trdna industrijska konstrukcija, namenjena za neprekinjeno delo v zahtevnih pogojih. Fodpfxjywaq Ds Anfjpg Naprava zagotavlja visok navor pri nizki hitrosti, idealna za stroje, transporterje, podajalnike in industrijske aplikacije. Tehnični podatki: Proizvajalec: KEB Antriebstechnik Model: ZG 2 KPR 71 G 6 TS 140 G 92 Moč: 0,55 kW Izhodna hitrost: približno 20 obr/min Navor: 259 Nm Napajanje: 230/400 V Frekvenca: 50 Hz Stopnja zaščite: IP55 Način montaže: B3 na nogah Teža: približno 26 kg Dimenzije: Premer osi: približno 30 mm Dolžina osi: približno 60 mm Stanje: Rabljeno Tehnično brezhiben Vidne sledi uporabe in površinska rja na osi Vizualno stanje skladno s fotografijami

Stanje: zelo dobro (rabljeno), ohranjenji držala orodja za DECO 20 - DECO 26 3 kosi - TORNOS fiksna držala orodja za X1Y1; X2Y2; X4Y4 ----- - Držalo stružnega noža za 16x16: Fpsdpfx Anjy Apn Asfeg - Cena na držalo 180,00 €/kos za DECO2000 ø20 & 25 mm DECO 20 in DECO 26 3x s čelno ploščo 1x brez čelne plošče ----- Dostava znotraj BRD 12,00 € Dostava znotraj EU 25,00 € Poleg tega imamo tudi 6 vretenastih redukcijskih vložkov: bili so v DECO 26 mm notranji ø 8,0 mm; ø 12,0 mm; ø 21,0 mm; 3x ø 26 mm zunanji ø 30 mm, navoj M32x1,5, dolžina cca 360 mm Prirubnica - zunanji ø 45 mm x 9 mm, 4x izvrtina z navojem M4 2x utor 8 mm Posebna cena za vseh 6 redukcij z dostavo 380,00 € Po želji z veseljem pošljemo slike, za to potrebujemo vaš e-mail naslov.

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Na voljo so trije konstrukcijsko podobni, a ne identični CNC avtomatski stružni stroji Tornos, vključno z magazini za podajanje palic LNS. 1) Stružnica, osi: 9, vretena: 2, največji premer palice: 10 mm (ena le 7 mm), hitrost vrtenja: 16.000 obr./min, hod: 66 mm, mere stroja X/Y/Z: pribl. 1700 mm / 1050 mm / 2000 mm, teža: pribl. 1500 kg, krmiljenje: Fanuc. 2) Magazin za podajanje palic, razpon premera palic: 1 mm–12 mm, zmogljivost polnjenja: 7 mm/10 mm: 36/24. Na voljo je dokumentacija. Možen je ogled na lokaciji. Posamična prodaja stružnice z ustreznim podajalnikom po dogovoru možna. Fedpfx Ansyypmyofjpg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement Fpjdpfox D D Ikjx Anfsg • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Technical Specification Counter Spindle: Yes