Sušilec Na Stisnjen Zrak nakup rabljenega (27.199)

Stanje: novo, - NEW - Kanuk® Original Hot Air Stove Nominal heat output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue gas temperature (°C): 216 Log length (cm): 48 Wood consumption (kg/h): 3.9 Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes Lrodpfx Aljvwf Rkj Njk No. 2100102

Stanje: dober (rabljeno), Leto izdelave: 1998, Compressed air tank, pressure vessel, pressure tank, air receiver, pressure cylinder, compressor tank - Manufacturer: Maschinen- und Behälterbau, vertical compressed air vessel Lodpfx Asphun Eol Nork - Capacity: 3000 l - Operating pressure: 11 bar - Accessories: incl. attached parts, see photos - Dimensions: Ø 1475 x 2760 mm - Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 34 kW Working output: 29 kW New device, original packaging: Yes Warm air blower, flue gas fan, and control panel with digital display: included Warm air distribution pipes: 2 x 180 mm with 2 freely rotatable, plug-in bends Lsdpspkwhqofx Al Nerk Intake/air filter: large-surface fresh air filter with no loss of performance / included Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Combustion chamber height: 590 mm Air delivery: 2200 m³/h Power consumption: 400W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air pipes: 1560 mm Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 125 kW Operating output: 99 kW Flue outlet diameter: 180 mm Warm air distribution ducts: 2 x 250 mm Combustion chamber length: 750 mm Combustion chamber width: 560 mm Combustion chamber height: 700 mm Air delivery: 6,300 m³/h Power consumption: 1,500 W Lsdpfok Utrhjx Al Nerk Designed for room volume: 1,500 m³ Area to be heated: 300/350 m² Stove height without warm air ducts: 1,980 mm Stove width: 800 mm Stove length without flue gas fan: 1,280 mm Weight: 415 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 350 kW Working output: 279 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 300 mm Furnace length: 1,200 mm Lrodpfok Utrtex Al Nek Furnace width: 740 mm Furnace height: 1,040 mm Air delivery: 17,800 m³/h Warm air blower power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without warm air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 510 kW Effective output: 407 kW New equipment, original packaging: Yes Flue outlet diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Lredek Utrwjpfx Al Nek Heatable area: 1,800 m² Furnace height without hot air ducts: 3,000 mm Furnace width: 1,220 mm Furnace length without flue gas fan: 2,700 mm Weight: 1,575 kg

Stanje: novo, Leto izdelave: 2025, Fire chamber output: 34 kW Working output: 29 kW New device: yes, originally packed Warm air blower, flue gas blower, and control unit with digital display: included Warm air ducting pipes: 2 x 180 mm with freely rotatable plug-in 90° bends Flue outlet diameter: 160 mm Fire chamber length: 500 mm Fire chamber width: 400 mm Fire chamber height: 590 mm Air delivery rate: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air ducting pipes: 1560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Lsdpfjk Utrasx Al Nsrk Weight: 190 kg

Stanje: novo, Leto izdelave: 2025, Nominal combustion chamber output: 49 kW Lrsdpfx Alek Utrde Njk Operational output: 45 kW New unit, original packaging: yes Warm air blower, flue gas blower, digital control display: included Warm air distribution ducts: 2 x 200 mm with freely rotatable plug-in bends Flue outlet diameter: 180 mm Combustion chamber length: 660 mm Combustion chamber width: 480 mm Combustion chamber height: 600 mm Air delivery: 3500 m³/h Power consumption: 550 W Designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without warm air ducts: 1750 mm Stove width: 700 mm Stove length without flue gas blower: 1150 mm Weight: 305 kg

Stanje: rabljeno, Leto izdelave: 2009, Overview This complete compressed air system was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The system comprises two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD refrigerant dryer, and one Donaldson UFA-AC0016 oil separator. Designed for reliable and energy-efficient air supply with up to 8.5 bar, this system is ideal for continuous production environments. The system has been regularly serviced, with the most recent comprehensive maintenance completed in August 2025, and is in good operating condition. The entire installation remains connected and operational and is available immediately for inspection and sale. Technical specifications - Year of manufacture: 2009 - 2013 - Application: Industrial compressed air system - Total capacity: 2 × 24.1 m³/min - Maximum pressure: 8.5 bar - Power consumption: 274.8 kW Ljdjxrc Acepfx Al Nsrk Scope of supply - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Refrigerant dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar Lsdpfx Alsvz Hq Tj Nsrk - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm Ljdevz Hq Hopfx Al Njrk - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa Ljdpfovz Hqyjx Al Njrk - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. Lrodpfsvz Hqtsx Al Nok The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Lsdpfx Asvz Hqmel Nork Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. Lrsdpfxevz Hqgj Al Nok - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Lrjdpfxevz Hhxo Al Nek Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: dober (rabljeno), Rezervoar za stisnjen zrak, tlačna posoda, tlačni rezervoar, posoda za stisnjen zrak, kompresorski rezervoar, hranilnik stisnjenega zraka -Proizvajalec: Elektra-Beckum, rezervoar/hranilnik stisnjenega zraka Lodpjya Dfijfx Al Nsrk -Prostornina: 150 L -Delovni tlak: 11 bar -Dimenzije: 1460/510/H530 mm -Teža: 92 kg

Stanje: novo, Leto izdelave: 2025, New KAESER Compressed Air Receiver 10,000 Liters, Vertical, Galvanized 16 bar Incl. pressure gauge and fitting set Year of manufacture: 2025 Lodpfxekzizgo Al Nork High-quality compressed air receiver with galvanized finish. Galvanized inside and outside to DIN EN ISO 1461 by hot-dip process. Connection nozzles for tapered threads. Technical Data: Volume: 10,000 liters Max. overpressure: 16 bar Diameter: 1,600 mm Tank height: 5,415 mm Weight: 2,550 kg Compressed air inlet connection: 2x DN 200 Compressed air outlet connection: 2x DN 200 Safety valve connection: G 2" Pressure gauge connection: G ½ Condensate drain connection: G 1½ Tank acceptance: RL 2014/68/EU Service openings according to AD2000: 1x manhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: galvanized Convenient leasing for new machines available via our partner bank. Visit our showroom. We always have a large selection of new and used compressors.

Stanje: rabljeno, Rezervoar za stisnjen zrak, tlačna posoda KAESER Tovarniška št.: 481127K Leto izdelave: 2001 Prostornina rezervoarja: 1000 litrov Ledpfx Ajxpqzuol Nork Obratovalni tlak: 11 barov - Tlačna posoda vroče cinkana - 3 priključne spojke z navojem 2" - 2 priključni spojki z navojem 1 1/2" - 3 priključne spojke z navojem 1/2" - 2 majhni čistilni odprtini - 3 krogelni ventili - 1 varnostni ventil - Manometer za tlak - 2 žerjavna ušesa na vrhu rezervoarja Premer rezervoarja: cca 800 mm Skupna višina: 2300 mm z nosilcem (brez priključkov) Teža: 230 kg Dobro ohranjen

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new exhibition piece: Compressed Air Receiver 1500 Litres, vertical, galvanized, 11 bar (with fitting set) incl. vessel documentation Year of manufacture: 2024 High-quality VIG compressed air receiver in galvanized version. Technical data: - Volume: 1500 litres - Permissible operating pressure: 11 bar - Medium: air - Diameter: 900 mm - Vessel height: 2381 mm - Weight: 379 kg - Compressed air inlet connection: 2 x G 2" - Compressed air outlet connection: 2 x G 2" - Safety valve connection: 2 x G 1/2" - Condensate drain connection: G 1 1/2" - Maintenance opening: 2 x handhole 100x150 mm Manufactured and tested in accordance with EU Directive 2009/105/EC & AD 2000 Lrodsvzw Ipopfx Al Nek Design temperature: -10 °C to +50 °C Surface coating: galvanized Attractive leasing options available for new machines via our partner bank. Visit our showroom! We always have a wide selection of new and used compressors in stock!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, New exhibition model: Ljdpfxev Ak Tno Al Njrk Compressed Air Receiver 1000 Liters Vertical, Galvanized, 11 bar (with valve kit) incl. vessel documentation Year of manufacture: 2025 High-quality VIG compressed air receiver in galvanized design. Technical data: Volume: 1000 liters Permissible operating pressure: 11 bar Medium: Air Test pressure: 15.73 bar Diameter: 800 mm Vessel height: 2348 mm Weight: 200 kg Compressed air inlet connection: 2 x G 2" Compressed air outlet connection: 2 x G 2" Safety valve connection: G 1/2" Condensate drain connection: G 1 1/2" Service opening: 1 x hand hole 100 x 150 mm Manufactured and tested in accordance with EU Directive 2014/68/EU AD 2000 Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: galvanized Attractive leasing options for new equipment available through our in-house bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Stanje: novo, Leto izdelave: 2023, skupna masa: 244 kg, skupna višina: 2.270 mm, pritisk: 11 letvica, new KAESER compressed air receiver 1000 liters, vertical, galvanized, 11 bar (including fitting kit and manometer kit) Year of manufacture: 2023 High-quality compressed air receiver in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 by dip coating. Connection nipples for tapered thread. Technical Data: - Capacity: 1000 liters - Maximum overpressure: 11 bar Lrodsqt A Iqepfx Al Nsk - Diameter: 800 mm - Tank height: 2265 mm - Weight: 244 kg - Compressed air inlet connection: 2 x G 1 1/2" - Compressed air outlet connection: 2 x G 2" - Safety valve connection: G 2" - Condensate drain connection: G 2" Type approval: RL2014/68/EU Inspection opening according to AD2000: 2 x hand hole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface finish: galvanized Attractive leasing options for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, New KAESER Compressed Air Receiver 5,000 Liters Vertical, Galvanized 11 bar Including pressure gauge and fitting set Year of manufacture: 2025 High-quality compressed air receiver in galvanized finish. Galvanized inside and outside by immersion according to DIN EN ISO 1461. Connection sockets for tapered threads. Technical Data: Volume: 5,000 liters Max. overpressure: 11 bar Diameter: 1,400 mm Tank height: 3,570 mm Weight: 1,050 kg Ljdpfjkzkfrsx Al Nork Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2" Pressure gauge set connection: G ½ Condensate drain connection: G 2½ Tank certification: RL 2014/68/EU Service openings according to AD2000: 1x manhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface finish: galvanized Convenient leasing for new equipment possible through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, New KAESER Compressed Air Receiver 5,000 Liters Vertical, Galvanized 11 bar Including pressure gauge and fitting set Year of manufacture: 2025 High-quality compressed air receiver in galvanized finish. Galvanized inside and outside by immersion according to DIN EN ISO 1461. Connection sockets for tapered threads. Technical Data: Volume: 5,000 liters Max. overpressure: 11 bar Diameter: 1,400 mm Lrodpfxoxt Rgfj Al Nek Tank height: 3,570 mm Weight: 1,050 kg Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2" Pressure gauge set connection: G ½ Condensate drain connection: G 2½ Tank certification: RL 2014/68/EU Service openings according to AD2000: 1x manhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface finish: galvanized Convenient leasing for new equipment possible through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, New exhibit: Compressed Air Receiver 500 Liters Vertical, Galvanized, 11 bar (with fitting set) incl. vessel documents Year of manufacture: 2025 High-quality VIG compressed air receiver with galvanized finish. Technical Data: Volume: 500 liters Permissible operating pressure: 11 bar Medium: Air Diameter: 600 mm Tank height: 1987 mm Lsdswhxqdopfx Al Nerk Weight: 148 kg Compressed air inlet connection: 2 x G 1 1/4" Compressed air outlet connection: 2 x G 1 1/4" Safety valve connection: G 1/2" Condensate drain connection: G 1 1/2" Maintenance opening: 1 x handhole 100 x 150 mm Manufactured and tested in accordance with EU Directive 2014/68/EU AD 2000 Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: galvanized Attractive leasing available for new equipment through our in-house bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!