Schloemann / Comec Stamco / Comec Stamco Linija Za Vzdolžno Rezanje 1000–1250 Mm nakup rabljenega (117.823)

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Custom made, vrsta vhodnega toka: trifazni, skupna širina: 1.800 mm, skupna dolžina: 14.650 mm, vhodna napetost: 400 V, vhodni tok: 16 A, največja širina rezanja: 1.800 mm, 22 C – Finn-Convey Industrial Fabric Spreading and Cutting Line (14.65 m x 1.8 m) – Complete with Air-Floatation Table Description Available for sale is a professional Finn-Convey fabric spreading and cutting table line in an industrial configuration, offered as a fully operational system. This system is designed for efficient fabric spreading and preparation in the cutting room. It enables controlled handling of heavy fabric rolls, precise layer formation, and a smooth material flow prior to cutting. The unit was operated as an independent production line together with a Bergman cross-cut saw (unit 114 A). This combination allows for efficient pre-cutting of fabric rolls to the desired length before spreading, thereby optimizing workflow and reducing manual labor. The system was used in professional garment manufacturing and was fully operational until the plant closure. Key Technical Data • Total length: 14.65 meters (modular construction, adaptable) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-floatation table for low-friction material transport • Drive: Motorized side drives for tension control during spreading System Components • Finn-Convey motorized side drives • Industrial air-floatation table with perforated surface • Integrated blower system (centrifugal fans under the tables) • Electric control cabinet for system operation • Fabric roll holders and support fixtures • Integrated end cutting unit with rotary knife Technical Details of the Cutting Unit • Speed-controlled AC motor (Taili Motor Co., Ltd., approx. 90–200 W) • Gearbox assembly (e.g., 5GN series) for high torque • Rotary knife with integrated sharpening device • Height-adjustable guide rails to accommodate different material thicknesses • Designed for multi-layer cutting Additional Drive Components • Auxiliary motor (e.g., 40 W class, speed controlled) for fine movements • Gear-based power transmission for stable continuous operation • External capacitor for single-phase operation (typical for auxiliary drives) System Architecture • Modular table design for flexible production layout adaptation • Air-assisted material movement to reduce friction • Tension-free fabric feed by appropriate roll systems • Mechanical or encoder-based length measurement, depending on configuration • Compatible with upstream cutting systems and manual processes Production Benefits • High efficiency due to long spreading lengths and reduced material waste • Ergonomic operation – heavy fabric layers can be moved easily Ljdpoy Au Aljfx Acaerr • Precise layer alignment through controlled drive units • Integrated cutting function improves workflow • Suitable for denim, upholstery, and technical textiles Condition Used industrial condition Taken directly from ongoing production Typical signs of use present Inspection possible prior to dismantling Sold as seen (‘as-is, where-is’), without warranty Location Valga, Estonia Dismantling and Transport To be organized by the buyer

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, KOMPLETNA LINJA REZANJA POLAR 137 ED AUTOTRIM, SESTAVLJENA IZ: REZALNIK POLAR 137 ED AT z napravo Autotrim za samodejno odstranjevanje odrezkov uporabna širina 137 cm, popolna s stranskimi povezovalnimi mizami iz nerjavečega jekla z vpihovanjem, pritisna letva pred rezilom, vrtljivo in nagibno sedlo RAVNALNIK POLAR RA 6 z valjem za iztiskavanje zraka, leto 2000 Lrsdpey R R Rhofx Acasr AVTOMATSKI ODLAGALNIK POLAR TR 130/4 Možnost konfiguracije odlagalnika in ravnalnika na desni ali levi strani Linija je nameščena in na voljo za preizkus v našem showroomu

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, teža tuljave: 10.000 kg, število ravnalnih valjev: 6, širina transportnega traku: 1.500 mm, maks. debelina aluminijaste pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, premer osi rezila: 255 mm, najv. debelina bakrene pločevine: 3 mm, notranji premer: 510 mm, zunanji premer: 1.500 mm, premer trna: 510 mm, dolžina vpenjala: 1.500 mm, širina tuljave: 1.500 mm, zunanji premer tuljave: 1.500 mm, število rezil: 8, trajanje garancije: 12 meseci, premer ravnalnega valja: 140 mm, skupna širina: 1.500 mm, Linija za razrez model 1.500 x 3 mm, sestavljena iz: - Odvijalec model 1500/5Ton (možnost prilagoditve) - nakladalna miza - pogonsko in ravnalno enoto s 6 valji premera 140 mm - krožni rez s 4 pari krožnih nožev Ledpfx Acsx Hr S Seajrr - avtomatska prebijalna skupina z 20 prilagojenimi vrtalnimi postajami - mehanske škarje - navijalec odpadkov

Leto izdelave: 2010, stanje: dober (rabljeno), 2250-mm pallet nailing line Semi-automatic nailing table Turner + (optional marker) Lrjdpfx Aspy H Erecajr Stacker (maximum 3000 mm) Transfer

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širina traku: največ 1.500 mm Debelina traku: 0,5 – 2 mm Teža tuljave: največ 7 t Premer osi: 508 mm Ledorazyqspfx Acasrr

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 6, širina transportnega traku: 1.300 mm, najv. debelina jeklene pločevine: 1 mm, širina tuljave: 1.250 mm, dolžina rezanja (maks.): 6.400 mm, premer ravnalnega valja: 70 mm, potrebna širina: 3.500 mm, zahteva za prostor dolžina: 18.275 mm, potrebna višina: 4.000 mm, Enoosebno upravljanje, hiter dostop do številnih različnih pločevin, avtomatska menjava pločevine, standardne pločevine ostajajo nameščene na napravi; zgornje pločevine so manj pogoste vrste; varna rešitev pomične vzpenjalne pomoči za nakladanje zgornjih odvijalnih enot; programabilna razrezovalna naprava z 8 pari nožev v stacionarni izvedbi; rezalni noži so izmenično razporejeni za rezanje z majhnim zvijanjem; krožni noži AL p s premerom 100 mm za čim manjši rez; 7,2 m dolg trak za izvoz trakov Ljdpfjxwc E Iex Acaorr Tehniška risba naprave v pdf je predstavljena zrcalno!

Stanje: zelo dobro (rabljeno), Linija za oblikovanje, premazovanje in cvrtje z vrhunsko specifikacijo. Kupljena nova leta 2022 in uporabljena le nekaj mesecev. Cvrtnik 6 m x 650 mm ima 800 delovnih ur. Lrsdpfxezii N De Acajr

Stanje: rabljeno, Sormac PO-30 – linija za odstranjevanje pešk, rezanje in deljenje paprik Celotna linija za obdelavo paprik Sormac, opremljena s 4 napravami Sormac PO-30 za odstranjevanje pešk, za avtomatsko odstranjevanje pešk in obdelavo paprik. Ta visoko zmogljiva linija za obdelavo je zasnovana za zagotavljanje visoke produktivnosti in dosledne kakovosti izdelkov za industrijo sveže pridelane hrane in predelave živil. Naprave PO-30 za odstranjevanje pešk natančno odstranijo peške in semenske membrane, integriran vakuumski sistem pa učinkovito odstrani semena in ostanke semen, kar zagotavlja čiste končne izdelke z minimalno izgubo izdelkov. Linija je opremljena z dovodnim in odvodnim transporterjem, ki zagotavlja neprekinjen in učinkovit pretok izdelkov. Primerna je za obdelavo rdečih, rumenih, zelenih in oranžnih paprik, zaradi česar je idealna za proizvodnjo sveže narezane zelenjave, mešanic zelenjave, sestavin za obroke in priročnih živil. Zahvaljujoč konstrukciji iz nerjavečega jekla je naprava higienična, trpežna in enostavna za čiščenje, kar jo naredi popolnoma primerno za sodobne obrate za predelavo živil. Ta rabljena linija za obdelavo Sormac je odlična rešitev za podjetja, ki želijo povečati proizvodno zmogljivost ali avtomatizirati obdelavo paprik. Kombinacija štirih naprav PO-30 za odstranjevanje pešk zagotavlja visoke hitrosti obdelave, zanesljivo delovanje in učinkovit proizvodni proces. Linija je trenutno razstavljena. Linija je sestavljena iz: Dovodni transporter z oprijemali – mere (Š x D): 600 × 3.500 mm Distribucijski transporter s 4 pnevmatskimi preusmeritvenimi ventili – mere (Š x D): 600 × 9.250 mm 4 × naprave Sormac PO-30 za odstranjevanje pešk Odvodni transporter za končne izdelke – mere (Š x D): 600 × 10.500 mm 4 × vakuumske enote s transporterjem za odvajanje odpadkov – mere (Š x D): 400 × 9.000 mm Osrednja električna nadzorna omara Načelo delovanja naprave PO-30 za odstranjevanje pešk Postaja 1: Odstrani se pecelj paprike. Postaja 2: Odstranijo se peški in semena. Lrjdpszkb Twsfx Acaer Postaja 3 (neobvezno): Odstrani se zgornji, spodnji ali oba konca paprike hkrati. Postaja 4 (neobvezno): Paprika se razdeli na 4 dele. Po modifikaciji naprave je mogoče razdeliti tudi na 2, 3, 6 ali 16 delov. Tehnične specifikacije Proizvodna zmogljivost: do 11.200 paprik/uro (odvisno od izdelka, kakovosti in operaterja) Premer izdelka: 60–115 mm Dolžina izdelka: 70–140 mm Funkcije: Odstranjevanje pešk, rezanje, deljenje Napajanje: 400 V (3 + N, 50 Hz) Poraba energije: 6 kW Leto proizvodnje: 2020 Zahteva za stisnjen zrak: 6 bar (1.600 l/min) Skupne mere (Š x G x V): 15.000 × 4.000 × 3.000 mm

Stanje: rabljeno, Straightening machine for strip material from coil WANZKE Type RG 400-7 Strip processing line for coil operation Machine No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roller width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roller width, straightening rolls: 408 mm Number of straightening rolls (top): 3 pieces (not driven) Number of straightening rolls (bottom): 4 pieces (driven) Straightening roll diameter: 50 mm Lrodpfx Acjxw Rcujasr Feed rolls: 2 pieces Ø 50 mm (bottom one driven) Feed roll width, top: 390 mm Feed roll width, bottom: 408 mm Strip speed: approx. 5 – 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain - Loop control with speed regulation in 2 stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of upper rollers via eccentric lever - Adjustable lateral strip guide on the entry side - 2 roller baskets for strip guiding - Electrical diagram included Space required for straightening machine with control: L x W x H 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement Ledpfxjfirx Nj Acajrr - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Stanje: novo, Leto izdelave: 2026, Avtomatska linija za rezanje v dolžino in vzdolžno rezanje Linija za vzdolžno rezanje in rezanje v dolžino, namenjena obdelavi pločevin Avtomatska linija za rezanje v dolžino in vzdolžno rezanje je zasnovana za vzdolžno rezanje in prečno rezanje tuljav pločevine v trakove in ravne pločevine s programirljivo dolžino. Proizvodna linija združuje več operacij v en skladen sistem: Dovod tuljave Rezanja Precizno niveliranje Servo-upravljanje za merjenje dolžine Rezanja v dolžino Transport končnih pločevin Avtomatsko zlaganje Stroj je primeren za obdelavo pocinkane jekla, predhodno barvanega jekla in drugih prevlečenih materialov, ki se uporabljajo pri proizvodnji sistemov za ogrevanje, prezračevanje in klimatizacijo (HVAC), strešnih kritin, fasadnih sistemov, valjarne in splošni obdelavi pločevine. Glavne značilnosti Kombinirano rezanje v dolžino in vzdolžno rezanje Popolnoma avtomatsko delovanje Hidravlični sistem za rezanje Precizno niveliranje pločevine Servo-upravljano merjenje dolžine Lodpfx Acjzrwhmsaorr Proizvodnja, ki jo nadzira PLC (programirljiva logična enota) Na dotik občutljiv uporabniški vmesnik Visoka natančnost proizvodnje Kompaktna zasnova stroja Zanesljiva industrijska konstrukcija Obdelava materiala Primerne materiale vključujejo: Pocinkano jeklo (GI) Predhodno barvano pocinkano jeklo (PPGI) Prevlečeno pločevino Odsek za rezanje je opremljen s kaljenimi rezalnimi orodji, zasnovanimi za natančno proizvodnjo trakov. Sistem za rezanje zagotavlja natančno širino trakov in stabilno kakovost rezanja med neprekinjeno proizvodnjo. Proizvodna linija je opremljena z avtomatskim hidravličnim sistemom za rezanje v dolžino. Tipična toleranca rezanja: ±2,5 mm za dolžino pločevine do 5000 mm ±3,0 mm za dolžino pločevine med 5000 in 10000 mm Pogonski sistem Sistem za valjanje in dovajanje poganja: Glavni motor: 4 kW Hidravlična pogonska enota: 3 kW Prenos moči: verižni pogon Industrijski menjalnik Robusten mehanski prenos Nadzorni sistem Tehnične specifikacije Parameter Specifikacija Vrsta stroja Avtomatska linija za rezanje v dolžino in vzdolžno rezanje Material GI / PPGI Maksimalna širina tuljave 1000–1250 mm Debelina materiala 0,25–0,1 mm Minimalna širina rezanja 60 mm Robusten gred s premerom 120 mm Maksimalno število rezalnih nožev 5 Hitrost proizvodnje 10–15 m/min Glavni motor 4 kW Hidravlična moč 3 kW Natančnost rezanja ±2,5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Vrsta rezanja Hidravlično rezanje v dolžino Prenos Verižni pogon Struktura stroja Okvir na steni + struktura za rezanje s kolom Dimenzije stroja Približno 2500 × 1500 × 1400 mm Električno napajanje 380 V / 50 Hz / 3-fazno Proizvodna linija je primerna za proizvodnjo: Praznih elementov za HVAC kanale Komponent za prezračevanje Strešnih pločevin Obložnih panelov za stene Praznih elementov za valjanje Delov iz pločevine Praznih elementov za lasersko rezanje Praznih elementov za stiskanje Panelov za električne omare Industrijskih izdelkov iz pločevine Prednosti Rezanja v dolžino in vzdolžno rezanje v eni proizvodni liniji Kompaktna zasnova stroja Visoka natančnost obdelave Nizke zahteve za vzdrževanje Hiter prehod na drugo proizvodnjo Avtomatsko zlaganje pločevine Visoka produktivnost Zanesljivo hidravlično rezanje Precizno niveliranje Primerno za neprekinjeno industrijsko proizvodnjo Standardna oprema Odvisno od zahtev stranke lahko proizvodna linija vključuje: Ročni razvijalnik tuljav Hidravlični razvijalnik tuljav Dvojni razvijalnik tuljav Vozilo za nalaganje tuljav Naprava

Stanje: rabljeno, Alu/PVC Profile Cutting Line – STB CAT 500 The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The CNC control unit, together with the management software, allows programming of processing parameters, leaving the operator with only the tasks of loading the bars and unloading the finished pieces. Cutting type: - 45° / 90° (left) cuts - Pusher stroke: 6500 mm Blade specifications: - Bore: Ø 30 mm - Diameter: Ø 500 mm - Speed: 3000 rpm - Max thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC 3PH - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar Lredpfx Asy I Twfecaor - Weight: 2300 kg Standard accessories: - Ø 500 mm carbide-tipped saw blade (Ø30 mm bore) - Welded steel frame with leveling feet and floor anchoring - Industrial PC onboard - Feed belts with inverter and acceleration/deceleration ramps - Label printer Dimensions: - Loader: 7900 mm - Machine: 1000 mm - Discharge: 2600 mm - Max width: 2300 mm - Max height: 1700 mm - Total length: 11,500 mm

Stanje: rabljeno, OCEVI kombinirana linija za rezanje na dolžino in vzdolžno rezanje 2000x10mm x30t (A3794) OCEVI kombinirana linija za rezanje na dolžino in vzdolžno rezanje 2000x10mm x30t (A3794) je idealen stroj za obe operaciji: natančno rezanje trakov na želeno dolžino ter vzdolžno rezanje kovinskih kolutov v trakove pri širini koluta 2.000 mm, največji debelini 10 mm in teži koluta do 30 ton. Sestava linije: 1. Zalagalna rampa 2. Nakladalno zibelko 30t 3. Dvojni stožčasti odvijalec 4. Hidravlična miza za luščenje 5. Roka s strukturo valjčnega mostu s pritiskalnim valjem 6. Sklop z vpenjalnim valjem in predravnalcem 7. Obrezovalne škarje (crop shear) 8. Nagibni valjčni transporter nad jamo 9. Gred za vzdolžno rezanje, premer 200 mm 10. Mobilno bočno vodilo 11. Napenjalna valjčna proga 12. Navijalec za stranske odrezke 13. Drobljalec robnih odrezkov 14. Navijalec + odlagalna zibelka 30 ton 15. Napenjalna valjčna proga do ravnalca Lodpfetvdy Isx Acaorr 16. Ravnalec (unger leveler) 17. Guillotinske leteče škarje 18. Vpenjalni valj za izmet pločevine 19. Zlagalec 20. Valjčni transporter za izmet zloženega materiala, 12 m 21. Hidravlična krmilna enota 22. Električna oprema 23. Orodje

Stanje: dober (rabljeno), 1 m širok panirni enrober v dobrem stanju. Ljdpfsx Hamwox Acaorr

Stanje: novo, Leto izdelave: 2024, Everything can be configured according to your requirements, with very short production and delivery times. We are happy to provide you with further information upon request. Technical specifications available upon request. Standard equipment: - Steel welded construction - DURMA CNC control unit (AURORA) - Remote diagnostics (Ethernet) - Lantek software with automatic nesting - Position detection of sheet metal to be cut via laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servo motors for X- and Y-axis movement - CNC control outputs/inputs for filter unit - Consumables starter kit - Plasma torch * - Ignition console * - Torch height control with ball screw spindles on double linear guides * Optional equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire Lredpfx Aofiqgrjcajr - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi-spindle drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and end of program With over 60 years of experience in research and production of sheet metal processing machines, and with 8,000 machines produced annually at three technologically advanced production facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are among the internationally renowned manufacturers in their sector, with products distributed in 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, offering you competent advice and support when it comes to sheet metal processing machines. Our demonstration center allows you to get an on-site overview of our machines, to be convinced first-hand of the quality and precise technology of our products, and to receive the best possible advice tailored to your company’s objectives. Our mission is to be your direct contact locally, providing you with services including training and customer support. We are happy to support you from Germany – from consultation and purchase to the entire lifetime of your machine. With our German subsidiary, we are always on site whenever you need us, able to react quickly and efficiently. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Stanje: novo, Leto izdelave: 2024, Everything can be configured upon request, with very short production and delivery times. We are happy to provide you with further information upon request. Technical specifications available on request. Standard Equipment: - Steel welded construction - DURMA CNC control unit (AURORA) - Remote diagnostic control (Ethernet) - Lantek Software W / automatic nesting - Laser-based positioning of the sheet to be cut - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC control outputs/inputs for the filter unit - Consumables starter kit - Plasma torch* - Ignition console* - Torch height control with ball screw drives on double linear guides* Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE standard safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Pipe cutting unit Ø50 mm - Ø400 mm - Additional support for the pipe cutting unit - Warning lamp for fault and end of program Lsdpfx Acjfirx Toaerr With over 60 years of experience in research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities with a total area of 150,000 m², Durmazlar Group and its DURMA machines are now among the internationally recognized manufacturers in their sector, with products distributed in 120 countries. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hessen region. Here, we are your direct contact from within the Durmazlar Group, providing expert advice and support on all matters related to sheet metal processing machinery. Our demonstration center gives you the opportunity to experience our machines firsthand, to be convinced of the quality and precise technology of our products, and to receive the best possible advice tailored to your business goals. Our mission is to be your direct local contact, providing comprehensive services including training and customer support. We are happy to support you from our base in Germany—through consultation, purchase, and throughout the entire lifecycle of your machine. Our German branch is always close by, ready to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Leto izdelave: 2024, stanje: novo, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power supply (Hypertherm XPR 170 XD Optimix): 170 A • Cutting capacity: ◦ Unalloyed steel, piercing, argon: 40 mm ◦ Unalloyed steel, piercing, air: 35 mm ◦ Unalloyed steel, straight cut: 60 mm ◦ Alloyed steel, piercing: 22 mm ◦ Alloyed steel, straight cut: 38 mm ◦ Aluminium, piercing: 25 mm ◦ Aluminium, straight cut: 38 mm Standard equipment: • Controller: Durma Aurora CNC controller • Truehole standard • Sheet measurement via laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick customization • Consumables kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: Remote maintenance Options included: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD Ledpfx Asdyfwkecasrr • Safety system with perimeter safety wire • Oxy-fuel torch with sensor • Plasma torch breakaway system • Air dryer

Stanje: rabljeno, Leto izdelave: 2012, Leto: 2012/2013 Stanje: dobro Razpoložljivost: 1. četrtletje 2026 (februar) Lrsdex Em Avjpfx Acajr Konfiguracija: - izravnalna enota MBO RBF 520 - razdelilna in rezalna enota MBO SVC 521C - zgibalna enota MBO DFT 560/6 - 6 žepov – samodejna nastavitev - zgibalni valji – samodejna nastavitev - izvlečna kaseta z rezalno gredjo - MBO ASP 66 – luskasti izložnik - MBO X – FW 50 – mobilna nožna enota

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, teža tuljave: 8 kg, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, skupna širina: 1.250 mm, Prodam rezalno linijo za vzdolžno rezanje Lodpfx Acov Twi Reaerr

Leto izdelave: 1985, stanje: zelo dobro (rabljeno), Bandwidth: max. 1,500 mm Strip thickness: 0.3 - 2 mm Ljdpfjnfu Icjx Acaerr Coil weight: 6 t Mandrel diameter: 508 mm Number of cuts: max. 9

Leto izdelave: 2021, stanje: rabljeno, Eillert G-1500 linija za rezanje zelenjave – Kot nova – Le 147 delovnih ur Na voljo takoj Izjemna priložnost za nakup univerzalne linije za rezanje zelenjave Eillert G-1500, ki je v dejanskem stanju novega stroja. Stroj ima le 147 delovnih ur in se prodaja kompleten z pripravljalno mizo, izhodnim trakom ter tremi izmenljivimi kompleti nožev. G-1500 je izjemno vsestranski stroj za rezanje zelenjave, zasnovan za srednje zmogljive proizvodne obrate, kot so predelovalci sveže narezane zelenjave, tovarne solat, profesionalne kuhinje in živilska proizvodnja. Primeren je za obdelavo različnih izdelkov, vključno s solato, zeljem, porom, korenjem, papriko, fižolom, zelišči in številnimi drugimi vrstami zelenjave. V ponudbo je vključeno: - Stroj za rezanje zelenjave Eillert G-1500 - Pripravljalna miza iz nerjavečega jekla - Izhodni transportni trak - 3 izmenljivi kompleti nožev - Upravljalna plošča na dotik - Mobilna izvedba iz nerjavečega jekla - Popolnoma pripravljen za proizvodnjo Glavne značilnosti: - Le 147 delovnih ur - Dejansko kot nov stroj - Higienska zasnova iz nerjavečega jekla - Hitro snemljivi trakovi za enostavno čiščenje in sanitacijo - Prostor za rezanje je popolnoma ločen od mehanskih komponent - Izmenljiv sistem nožev za maksimalno prilagodljivost - Natančno škarjasto rezanje za najboljšo kakovost izdelka in podaljšano obstojnost - Primeren za listnato zelenjavo, korenovke, zelišča in številne druge izdelke Lrodszgfyajpfx Acaor Tehnični podatki: - Model: Eillert G-1500 - Zmogljivost: približno 100–800 kg/uro, odvisno od izdelka in velikosti reza - Obseg reza: 1–50 mm - Napajanje: 400V / 3 faze - Poraba energije: približno 1,25 kW - Konstrukcija iz nerjavečega jekla - Nastavljiva hitrost trakov - Dvojni sistem hitrosti nožev Stanje: Stroj je bil zelo malo v uporabi in ima le 147 delovnih ur od novega. Stanje je odlično tako mehansko kot vizualno, zato predstavlja idealno alternativo nakupu novega stroja z bistveno višjo investicijo. Uporaba: Primeren za obdelavo: - Solate in listnate zelenjave - Zelja - Porov - Korenja - Paprike - Fižola - Zelišč - Kumar - Čebule - Različnih sveže narezanih zelenjavnih izdelkov Možen ogled in testiranje stroja pod napetostjo po predhodnem dogovoru. Lokacija: Emmeloord, Nizozemska Stanje: Kot novo Dobava: Takoj

Stanje: rabljeno, Leto izdelave: 2000, Proizvajalec: STAM Model: Stam 2000-3 Leto: 2002 Stanje: Rabljeno Inventarna številka: 0395 Razvijalec – Največja teža: 30 t Razvijalec – Največja širina: 2000 mm Razvijalec – Najmanjša širina: 400 mm Razvijalec – Največji zunanji premer koluta: 1.800 mm Razvijalec – Hidravlično raztezanje: najmanj 508 mm, največ 610 mm Lodpfx Acsywd Akjajrr Ravnalec – Širina traku: 2.000 mm Ravnalec – Največja debelina traku: 3 mm Ravnalec – Najmanjša debelina traku: 0,6 mm Ravnalec – Število valjev: 17 Ravnalec – Premer valjev: 46 mm Elektronski podajalnik – Najmanjši korak: 250 mm, največji korak: 4.000 mm.

Stanje: dober (rabljeno), Leto izdelave: 2014, Manufacturer: MIBA Type: LNF65 Lrodpfx Acjwq Hqkoaer Control: SIEMENS 840D Year of manufacture: 2014 Specifications Metric US Standard There are (currently) no specifications available for this machine. Dimensions (Approximate) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all critical details.

Leto izdelave: 1967, stanje: dober (rabljeno), Bandwidth: 300 - 1,250 mm Lredpfx Aced Ha Irsajr Strip thickness: 0.5 - 3 mm Blade shaft diameter: 180 mm

Leto izdelave: 1967, stanje: dober (rabljeno), Bandwidth: 300 - 1,250 mm Strip thickness: 0.5 - 3 mm Blade shaft diameter: 180 mm Ljdpfjgruhcox Acajrr